SFH6750-X016 [VISHAY]
Optocoupler - IC Output, 2 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 10 Mbps, 0.400 INCH, ROHS COMPLIANT, DIP-8;型号: | SFH6750-X016 |
厂家: | VISHAY |
描述: | Optocoupler - IC Output, 2 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 10 Mbps, 0.400 INCH, ROHS COMPLIANT, DIP-8 输出元件 |
文件: | 总11页 (文件大小:222K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SFH6741, SFH6742, SFH6750, SFH6752
Vishay Semiconductors
High Speed Optocoupler, Single and Dual, 10 MBd
FEATURES
Single Channel
• Choice of CMR performance of 10 kV/μs,
NC
A
1
2
3
4
8
7
6
5
5 kV/μs, and 100 V/μs
• High speed: 10 MBd typical
• + 5 V CMOS compatibility
• Pure tin leads
VCC
VE
VO
C
NC
GND
• Guaranteed AC and DC performance over
temperature: - 40 °C to + 100 °C temperature
range
SFH6741, SFH6742
Dual Channel
• Meets IEC 60068-2-42 (SO2) and IEC 60068-2-43 (H2S)
requirements
• Low input current capability: 5 mA
• Compliant to RoHS Directive to 2002/95/EC and in
accordance WEEE 2002/96/EC
1
2
3
4
8
A1
C1
C2
A2
VCC
VO1
7
6
5
VO2
GND
SFH6750, SFH6752
APPLICATIONS
18921-15
• Microprocessor system interface
• PLC, ATE input/output isolation
• Computer peripheral interface
• Digital fieldbus isolation: CC-link, DeviceNet, profibus,
SDS
• High speed A/D and D/A conversion
• AC plasma display panel level shifting
• Multiplexed data transmission
• Digital control power supply
DESCRIPTION
The SFH674x and SFH675x are single channel 10 MBd
optocouplers utilizing a high efficient input LED coupled with
an integrated optical photodiode IC detector. The detector
has an open drain NMOS-transistor output, providing less
leakage compared to an open collector Schottky clamped
transistor output. For the single channel type, an enable
function on pin 7 allows the detector to be strobed. The
internal shield provides a guaranteed common mode
transient immunity of 5 kV/μs for the SFH6741 and 10 kV/μs
for the SFH6742 and SFH6752.
• Ground loop elimination
AGENCY APPROVALS
• UL1577, file no. E52744 system code H, double protection
• cUL - file no. E52744, equivalent to CSA bulletin 5A
•
DIN EN 60747-5-2 (VDE 0884)/ VDE available with option 1
• Reinforced insulation rating per IEC60950 2.10.5.1
ORDERING INFORMATION
DIP-8
Option 6
S
F
H
6
7
#
#
-
X
0
0
#
T
PART NUMBER
PACKAGE OPTION
TAPE
AND
REEL
10.16 mm
7.62 mm
Option 7
> 0.7 mm
SINGLE CHANNEL
CMR (kV/μs)
DUAL CHANNEL
CMR (kV/μs)
AGENCY CERTIFIED/PACKAGE
BSI, UL, cUL
5
-
10
0.1
10
-
DIP-8
-
-
DIP-8, 400 mil, option 6
SMD-8, option 7
-
SFH6742-X006
-
SFH6750-X006
-
-
SFH6741-X007T
SFH6752-X007T
Note
•
For additional information on the available options refer to Option Information.
Document Number: 82584
Rev. 2.1, 29-Apr-11
For technical questions, contact: optocoupleranswers@vishay.com
This document is subject to change without notice.
www.vishay.com
1
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH6741, SFH6742, SFH6750, SFH6752
High Speed Optocoupler, Single and Dual,
Vishay Semiconductors
10 MBd
TRUTH TABLE (positive logic)
LED
On
Off
On
Off
On
Off
ENABLE
OUTPUT
H
H
L
H
H
H
L
L
L
NC
NC
H
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Average forward current (single channel)
IF
IF
20
15
5
mA
mA
Average forward current (per channel for
dual channel)
Reverse input voltage
Enable input voltage (single channel)
Enable input current (single channel)
Surge current
VR
VE
V
VCC + 0.5 V
V
IE
5
mA
mA
t = 100 μs
IFSM
200
OUTPUT
Supply voltage
VCC
IO
7
50
7
V
mA
V
Output current
Output voltage
VO
Output power dissipation (single channel)
Pdiss
85
mW
Output power dissipation per channel
(dual channel)
Pdiss
60
mW
COUPLER
Storage temperature
Tstg
- 55 to + 150
- 40 to + 100
260
°C
°C
Operating temperature
Lead solder temperature (single channel)
Solder reflow temperature (1)
Isolation test voltage
Tamb
for 10 s
for 1 min
t = 1 s
°C
260
°C
VISO
5300
VRMS
Notes
•
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through
hole devices (DIP).
(1)
RECOMMENDED OPERATING CONDITIONS
PARAMETER
TEST CONDITION
SYMBOL
Tamb
VCC
IFL
MIN.
- 40
4.5
0
MAX.
100
5.5
250
15
UNIT
°C
V
Operating temperature
Supply voltage
Input current low level
Input current high level
Logic high enable voltage
Logic low enable voltage
Output pull up resistor
Fanout
μA
mA
V
IFH
5
VEH
VEL
2
VCC
0.8
4K
0
V
RL
330
RL = 1 k
N
5
-
www.vishay.com
2
For technical questions, contact: optocoupleranswers@vishay.com
This document is subject to change without notice.
Document Number: 82584
Rev. 2.1, 29-Apr-11
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH6741, SFH6742, SFH6750, SFH6752
High Speed Optocoupler, Single and Dual,
Vishay Semiconductors
10 MBd
ELECTRICAL CHARACTERISTICS
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
INPUT
Input forward voltage
Reverse current
Input capacitance
OUTPUT
IF = 10 mA
R = 5 V
VF
IR
1
1.4
0.01
55
1.7
10
V
V
μA
pF
f = 1 MHz, VF = 0 V
CI
VE = 0.5 V, IF = 0 mA
VE = VCC, IF = 0 mA
ICCH
ICCH
4.1
3.3
7
6
mA
mA
High level supply current
(single channel)
High level supply current
(dual channel)
IF = 0 mA
ICCH
6.9
12
mA
VE = 0.5 V, IF = 10 mA
VE = VCC, IF = 10 mA
ICCL
ICCL
4
7
6
mA
mA
Low level supply current
(single channel)
3.3
Low level supply current
(dual channel)
IF = 10 mA
ICCL
IOH
VOL
ITH
6.5
0.002
0.2
12
1
mA
μA
V
VE = 2 V, VO = 5.5 V,
IF = 250 μA
High level output current
Low level output voltage
Input threshold current
VE = 2 V, IF = 5 mA,
OL (sinking) = 13 mA
0.6
5
I
VE = 2 V, VO = 5.5 V,
OL (sinking) = 13 mA
VE = 2 V
2.4
mA
I
High level enable current
Low level enable current
High level enable voltage
Low level enable voltage
IEH
IEL
- 0.6
- 0.8
- 1.6
- 1.6
mA
mA
V
VE = 0.5 V
VEH
VEL
2
0.8
V
Note
•
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
All typicals at Tamb = 25 °C, VCC = 5.5 V, unless otherwise specified.
SWITCHING CHARACTERISTICS
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Propagation delay time to high
output level
RL = 350 , CL = 15 pF
tPLH
20
48
100
ns
Propagation delay time to low
output level
RL = 350 , CL = 15 pF
tPHL
25
50
100
ns
Pulse width disortion
RL = 350 , CL = 15 pF
RL = 350 , CL = 15 pF
|tPHL - tPLH
|
2.9
8
35
40
ns
ns
Propagation delay skew
tPSK
Output rise time
(10 % to 90 %)
RL = 350 , CL = 15 pF
tr
23
7
ns
ns
ns
ns
Output fall time
(90 % to 10 %)
RL = 350 , CL = 15 pF
RL = 350 , CL = 15 pF,
tf
Propagation delay time of
enable from VEH to VEL
tELH
tEHL
12
11
V
EL = 0 V, VEH = 3 V
RL = 350 , CL = 15 pF,
EL = 0 V, VEH = 3 V
Propagation delay time of
enable from VEL to VEH
V
Note
•
Over recommended temperature (Tamb = - 40 °C to + 100 °C), VCC = 5 V, IF = 7.5 mA unless otherwise specified.
All typicals at Tamb = 25 °C, VCC = 5 V.
Document Number: 82584
Rev. 2.1, 29-Apr-11
For technical questions, contact: optocoupleranswers@vishay.com
This document is subject to change without notice.
www.vishay.com
3
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH6741, SFH6742, SFH6750, SFH6752
High Speed Optocoupler, Single and Dual,
Vishay Semiconductors
10 MBd
VCC
Single channel
Pulse gen.
Zo = 50 Ω
tf = tr = 5 ns
VCC
VE
1
2
3
4
8
7
6
5
RL
= 7.5 mA
= 3.75 mA
0 mA
IF
IF
IF
Input IF
0.1 µF
bypass
VOUT
Output VO
monitoring
node
Input IF
monitoring
node
VOH
Output VO
1.5 V
VOL
RM
CL= 15 pF
GND
tPHL
tPLH
The probe and Jig capacitances are included in CL
Fig. 1 - Single Channel Test Circuit for tPLH, tPHL, tr and tf
18964-2
Pulse Gen.
Z
t
= 50 Ω
o
f
V
CC
= t = 5 ns
r
Dual Channel
V
I
F
1
2
3
4
8
7
6
5
CC
R
L
Output V
O
Input
Monitoring
Node
Monitoring
Node
R
0.1 µF
Bypass
= 15 pF
C
M
L
GND
18963-2
Fig. 2 - Dual Channel Test Circuit for tPLH, tPHL, tr and tf
Input VE
monitoring node
Pulse gen.
Zo = 50 Ω
VCC
tf = tr = 5 ns
Single channel
VCC
VE
R
1
2
3
4
8
7
6
5
L
3 V
7.5 mA
IF
Output VO
monitoring
node
1.5 V
Input VE
0.1 µF
bypass
VOUT
tEHL
tELH
CL = 15 pF
Output VO
1.5 V
GND
The probe and Jig capacitances are included in CL
Fig. 3 - Single Channel Test Circuit for tEHL, and tELH
18975-2
www.vishay.com
4
For technical questions, contact: optocoupleranswers@vishay.com
This document is subject to change without notice.
Document Number: 82584
Rev. 2.1, 29-Apr-11
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH6741, SFH6742, SFH6750, SFH6752
High Speed Optocoupler, Single and Dual,
Vishay Semiconductors
10 MBd
COMMON MODE TRANSIENT IMMUNITY
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
|VCM| = 10 V, VCC = 5 V, IF = 0 mA,
|CMH|
100
V/μs
V
O(min.) = 2 V, RL = 350 , Tamb = 25 °C (1)
|VCM| = 50 V, VCC = 5 V, IF = 0 mA,
|CMH|
|CMH|
|CML|
|CML|
|CML|
5000
10 000
100
10 000
15 000
V/μs
V/μs
V/μs
V/μs
V/μs
V
O(min.) = 2 V, RL = 350 , Tamb = 25 °C (2)
|VCM| = 1 kV, VCC = 5 V, IF = 0 mA,
V
O(min.) = 2 V, RL = 350 , Tamb = 25 °C (3)
Common mode transient immunity
(high)
|VCM| = 10 V, VCC = 5 V, IF = 7.5 mA,
V
V
V
O(max.) = 0.8 V, RL = 350 , Tamb = 25 °C (1)
|VCM| = 50 V, VCC = 5 V, IF = 7.5 mA,
5000
10 000
15 000
O(max.) = 0.8 V, RL = 350 , Tamb = 25 °C (2)
|VCM| = 1 kV, VCC = 5 V, IF = 7.5 mA,
10 000
O(max.) = 0.8 V, RL = 350 , Tamb = 25 °C (3)
Notes
(1)
(2)
(3)
For SFH6750
For SFH6741
For SFH6742 and SFH6752
VCC
IF
Single channel
(PEAK)
VCM
VCC
VE
RL
Output VO
monitoring
node
1
2
3
4
8
7
6
5
V
CM
0 V
B
A
= 0 mA
Switch AT A: IF
0.1 µF
VOUT
CMH
CML
VO
bypass
5 V
)
(min.
VO
VFF
= 7.5 mA
Switch AT A:
IF
(max.)
VO
GND
V
O
0.5 V
VCM
-
+
Pulse generator
18976-2
ZO = 50 Ω
Fig. 4 - Single Channel Test Circuit for Common Mode Transient Immunity
I
F
Dual Channel
B
+ 5 V
V
8
7
6
5
1
2
3
4
CC
A
R
L
Output V
O
Monitoring
Node
0.1 µF
Bypass
V
FF
GND
V
CM
+
-
Pulse Generator
= 50 Ω
18977
Z
O
Fig. 5 - Dual Channel Test Circuit for Common Mode Transient Immunity
Document Number: 82584
Rev. 2.1, 29-Apr-11
For technical questions, contact: optocoupleranswers@vishay.com
This document is subject to change without notice.
www.vishay.com
5
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH6741, SFH6742, SFH6750, SFH6752
High Speed Optocoupler, Single and Dual,
Vishay Semiconductors
10 MBd
SAFETY AND INSULATION RATINGS
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Climatic classification
Comparative tracking index
Peak transient overvoltage
Peak insulation voltage
Safety rating - power output
Safety rating - input current
Safety rating - temperature
Creepage distance
according to IEC 69 part 1
55/110/21
CTI
VIOTM
VIORM
PSO
ISI
175
8000
630
399
V
V
500
300
175
mW
mA
°C
TSI
Standard DIP-8
Standard DIP-8
400 mil DIP-8
7
7
mm
mm
mm
mm
mm
Clearance distance
Creepage distance
8
Clearance distance
400 mil DIP-8
8
Insulation thickness, reinforced rated
per IEC60950.2.10.5.1
0.2
Note
•
As per IEC 60747-5-2, §7.4.3.8.1, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with
the safety ratings shall be ensured by means of prodective circuits.
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
7
6
5
4
3
2
1
0
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
IF = 50 mA
IF = 20 mA
VR = 5 V
IF = 10 mA
IF = 1 mA
- 40 - 20
0
20
40
60
80 100
- 40 - 20
0
20
40
60
80 100
Tamb - Ambient Temperature (°C)
17613-1
Tamb - Ambient Temperature (°C)
17610
Fig. 6 - Forward Voltage vs. Ambient Temperature
Fig. 8 - Reverse Current vs. Ambient Temperature
1.60
1.55
1.50
1.45
1.40
1.35
1.30
1.25
1.20
1.15
1.10
4.0
3.5
3.0
VCC = 7 V
IF = 10 mA
VCC = 5 V
IF = 10 mA
2.5
2.0
1.5
1.0
0.5
0.0
0
5
10 15 20 25 30 35 40 45 50
IF - Forward Current (mA)
- 40 - 20
0
20
40
60
80 100
17611
Tamb - Ambient Temperature (°C)
17614
Fig. 7 - Forward Voltage vs. Forward Current
Fig. 9 - Low Level Supply Current vs. Ambient Temperature
www.vishay.com
6
For technical questions, contact: optocoupleranswers@vishay.com
Document Number: 82584
Rev. 2.1, 29-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH6741, SFH6742, SFH6750, SFH6752
High Speed Optocoupler, Single and Dual,
Vishay Semiconductors
10 MBd
0.30
0.25
0.20
0.15
0.10
0.05
0.00
3.5
3.4
3.3
3.2
3.1
3.0
2.9
2.8
V
= 5.5 V
IL = 16 mA
IL = 13 mA
IFC=C 5 mA
VCC = 7 V
IF = 0.25 mA
V
CC = 5 V
IF = 0.25 mA
IL = 10 mA
IL = 6 mA
- 40 - 20
0
20
40
60
80 100
- 40 - 20
0
20
40
60
80 100
Tamb - Ambient Temperature (°C)
17615
Tamb - Ambient Temperature (°C)
17618
Fig. 10 - High Level Supply Current vs. Ambient Temperature
Fig. 13 - Low Level Output Voltage vs. Ambient Temperature
2.8
2.7
60
IF = 5 mA
IF = 10 mA
50
40
30
20
10
0
2.6
RL = 350 Ω
2.5
2.4
RL = 4 kΩ
2.3
RL = 1 kΩ
2.2
2.1
- 40 - 20
0
20
40
60
80 100
- 40 - 20
0
20
40
60
80 100
Tamb - Ambient Temperature (°C)
Tamb - Ambient Temperature (°C)
17619
17616
Fig. 11 - Input Threshold On Current vs. Ambient Temperature
Fig. 14 - Low Level Output Current vs. Ambient Temperature
2.6
2.5
50
45
40
35
30
25
20
15
10
5
2.4
RL = 350 Ω
2.3
2.2
RL = 4 kΩ
2.1
RL = 1 kΩ
2.0
0
- 40 - 20
0
20
40
60
80 100
- 40 - 20
0
20
40
60
80 100
Tamb - Ambient Temperature (°C)
Tamb - Ambient Temperature (°C)
17617
17620
Fig. 12 - Input Threshold Off Current vs. Ambient Temperature
Fig. 15 - High Level Output Current vs. Ambient Temperature
Document Number: 82584
Rev. 2.1, 29-Apr-11
For technical questions, contact: optocoupleranswers@vishay.com
www.vishay.com
7
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH6741, SFH6742, SFH6750, SFH6752
High Speed Optocoupler, Single and Dual,
Vishay Semiconductors
10 MBd
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
50
40
30
20
10
0
RL = 4 kΩ
RL = 1 kΩ
RL = 350 Ω
1.5
1.0
0.5
0.0
RL = 1 kΩ
RL = 350 Ω
RL = 4 kΩ
0
1
2
5
3
4
- 40 - 20
0
20
40
60
80 100
IF - Forward Input Current (mA)
17624
Tamb - Ambient Temperature (°C)
17621
Fig. 16 - Output Voltage vs. Forward Input Current
Fig. 19 - Pulse Width Distortion vs. Ambient Temperature
120
60
tPLH, 4 kΩ
100
50
RL = 4 kΩ
80
40
30
tPLH, 1 kΩ
t
PLH, 350 Ω
60
40
20
0
RL = 1 kΩ
20
t
PHL, 350 Ω
tPHL, 1 kΩ
PHL, 4 kΩ
10
t
RL = 350 Ω
0
9
7
5
11
13
15
- 40 - 20
0
20
40
60
80 100
IF - Forward Current (mA)
17625
Tamb - Ambient Temperature (°C)
17622
Fig. 17 - Propagation Delay vs. Ambient Temperature
Fig. 20 - Pulse Width Distortion vs. Forward Current
120
300
tPLH, 4 kΩ
tr, RL = 4 kΩ
250
100
80
200
tPLH, 1 kΩ
tPLH, 350 Ω
60
150
tf, RL = 350 Ω
tf, RL = 1 kΩ
40
100
tf, RL = 4 kΩ
t
PHL, 350 Ω
tr, RL = 1 kΩ
t
PHL, 1 kΩ
20
0
50
tPHL, 4 kΩ
tr, RL = 350 Ω
0
5
11
13
15
7
9
- 40 - 20
0
20
40
60
80 100
IF - Forward Current (mA)
Tamb - Ambient Temperature (°C)
17623
17626
Fig. 18 - Propagation Delay vs. Forward Current
Fig. 21 - Rise and Fall Time vs. Ambient Temperature
www.vishay.com
8
For technical questions, contact: optocoupleranswers@vishay.com
Document Number: 82584
Rev. 2.1, 29-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH6741, SFH6742, SFH6750, SFH6752
High Speed Optocoupler, Single and Dual,
Vishay Semiconductors
10 MBd
300
250
200
150
100
50
60
50
40
30
20
10
0
tr, RL = 4 kΩ
tELH = 4 kΩ
tELH = 350 Ω
tEHL = 350 Ω
tf, RL = 350 Ω
tf, RL = 1 kΩ
t
ELH = 1 kΩ
tf, RL = 4 kΩ
tr, RL = 1 kΩ
tr, RL = 350 Ω
tEHL = 1 kΩ
- 40 - 20
tEHL = 4 kΩ
40 60 80 100
0
5
7
9
11
13
15
0
20
IF - Forward Current (mA)
17627
17628
Tamb - Ambient Temperature (°C)
Fig. 22 - Rise and Fall Time vs. Forward Current
Fig. 23 - Enable Propagation Delay vs. Ambient Temperature
PACKAGE DIMENSIONS in millimeters
Pin one ID
4
5
3
6
1
2
7
6.645 0.165
8
ISO method A
9.77 0.14
0.95 0.19
4° typ.
7.62 typ.
0.79
3.555 0.255
0.70 0.19
6.095 0.255
1.27
10°
3.045 0.255
3° to 9°
0.51 0.05
2.54 typ.
0.25 0.05
i178006
Document Number: 82584
Rev. 2.1, 29-Apr-11
For technical questions, contact: optocoupleranswers@vishay.com
This document is subject to change without notice.
www.vishay.com
9
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH6741, SFH6742, SFH6750, SFH6752
High Speed Optocoupler, Single and Dual,
Vishay Semiconductors
10 MBd
PACKAGE DIMENSIONS in millimeters
Option 6
Option 9
Option 7
10.36
9.96
9.53
10.03
7.62 typ.
7.8
7.4
7.62 ref.
0.7
4.6
4.1
0.102
0.249
8 min.
0.25 typ.
15° max.
0.51
1.02
0.35
0.25
8.4 min.
10.3 max.
8 min.
10.16
10.92
18450
PACKAGE MARKING (for example)
SFH6741
X007
V YWW H 68
Notes
•
•
Option 1 and VDE logos are only marked on option 1 parts.
Tape and reel suffix (T) is not part of the package marking.
www.vishay.com
10
For technical questions, contact: optocoupleranswers@vishay.com
This document is subject to change without notice.
Document Number: 82584
Rev. 2.1, 29-Apr-11
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
相关型号:
SFH6751-X017T
Optocoupler - IC Output, NPN-OUTPUT DC-INPUT OPTOCOUPLER,2-CHANNEL,5.3KV ISOLATION,DIP
VISHAY
©2020 ICPDF网 联系我们和版权申明