SI4886DY-T1-E3 [VISHAY]
N-Channel Reduced Qg, Fast Switching MOSFET; N沟道减少的Qg ，快速开关MOSFET
| 型号： | SI4886DY-T1-E3 |
| 厂家： | 
VISHAY |
| 描述： | N-Channel Reduced Qg, Fast Switching MOSFET |
| 文件： | 总8页 (文件大小：596K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Si4886DY
Vishay Siliconix
N-Channel Reduced Q , Fast Switching MOSFET
g
FEATURES
PRODUCT SUMMARY
•
Halogen-free According to IEC 61249-2-21
Definition
VDS (V)
RDS(on) (Ω)
ID (A)
13
0.010 at VGS = 10 V
0.0135 at VGS = 4.5 V
•
•
•
TrenchFET® Power MOSFETs
High-Efficiency PWM Optimized
Compliant to RoHS Directive 2002/95/EC
30
11
SO-8
D
S
S
S
G
D
D
D
D
1
2
3
4
8
7
6
5
G
Top View
S
Ordering Information: Si4886DY-T1-E3 (Lead (Pb)-free)
Si4886DY-T1-GE3 (Lead (Pb)-free and Halogen-free)
N-Channel MOSFET
ABSOLUTE MAXIMUM RATINGS T = 25 °C, unless otherwise noted
A
Parameter
Symbol
10 s
Steady State
Unit
VDS
Drain-Source Voltage
Gate-Source Voltage
30
20
V
VGS
TA = 25 °C
TA = 70 °C
13
9.5
7.6
Continuous Drain Current (TJ = 150 °C)a
ID
10.5
A
IDM
IS
Pulsed Drain Current
50
Continuous Source Current (Diode Conduction)a
2.60
2.95
1.90
1.40
1.56
1.0
TA = 25 °C
TA = 70 °C
Maximum Power Dissipationa
PD
W
TJ, Tstg
Operating Junction and Storage Temperature Range
- 55 to 150
°C
THERMAL RESISTANCE RATINGS
Parameter
Symbol
Typical
35
Maximum
Unit
t ≤ 10 s
42
80
23
Maximum Junction-to-Ambient (MOSFET)a
Maximum Junction-to-Foot (Drain)
RthJA
Steady State
Steady State
68
°C/W
RthJF
18
Notes:
a. Surface Mounted on 1" x 1" FR4 board.
Document Number: 71142
S09-0869-Rev. B, 18-May-09
www.vishay.com
1
Si4886DY
Vishay Siliconix
MOSFET SPECIFICATIONS T = 25 °C, unless otherwise noted
J
Parameter
Symbol
Test Conditions
Min.
Typ.
Max.
Unit
Static
VGS(th)
IGSS
VDS = VGS, ID = 250 µA
Gate Threshold Voltage
0.80
V
VDS = 0 V, VGS
=
20 V
Gate-Body Leakage
100
1
nA
VDS = 24 V, VGS = 0 V
DS = 24 V, VGS = 0 V, TJ = 70 °C
VDS ≥ 5 V, VGS = 10 V
IDSS
ID(on)
Zero Gate Voltage Drain Current
µA
A
V
5
On-State Drain Currenta
40
VGS = 10 V, ID = 13 A
0.0078
0.0105
38
0.010
Drain-Source On-State Resistancea
RDS(on)
Ω
V
GS = 4.5 V, ID = 11 A
0.0135
Forward Transconductancea
Diode Forward Voltagea
Dynamicb
gfs
VDS = 15 V, ID = 13 A
IS = 2.6 A, VGS = 0 V
S
V
VSD
0.74
1.1
20
Qg
Qgs
Qgd
td(on)
tr
Total Gate Charge
Gate-Source Charge
Gate-Drain Charge
Turn-On Delay Time
Rise Time
14.5
3.2
4.3
14
5
VDS = 15 V, VGS = 5.0 V, ID = 13 A
nC
ns
20
10
80
30
70
V
DD = 15 V, RL = 15 Ω
ID ≅ 1 A, VGEN = 10 V, Rg = 6 Ω
td(off)
tf
Turn-Off Delay Time
Fall Time
42
18
40
trr
IF = 2.6 A, dI/dt = 100 A/µs
Source-Drain Reverse Recovery Time
Notes:
a. Pulse test; pulse width ≤ 300 µs, duty cycle ≤ 2 %.
b. Guaranteed by design, not subject to production testing.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
50
40
30
20
10
0
50
40
30
20
10
0
V
= 10 V thru 4 V
GS
T
= 125 °C
C
25 °C
1.5
3 V
1 V
- 55 °C
2.5
0
2
4
6
8
1
0
0.5
1.0
2.0
3.0
3.5
V
GS
- Gate-to-Source Voltage (V)
V
- Drain-to-Source Voltage (V)
DS
Output Characteristics
Transfer Characteristics
www.vishay.com
2
Document Number: 71142
S09-0869-Rev. B, 18-May-09
Si4886DY
Vishay Siliconix
TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
0.020
2500
2000
1500
1000
500
0.015
C
iss
V
GS
= 4.5 V
0.010
0.005
0
V
GS
= 10 V
C
oss
C
rss
0
0
10
20
30
40
50
0
5
10
15
20
25
30
I
D
- Drain Current (A)
V
DS
- Drain-to-Source Voltage (V)
On-Resistance vs. Drain Current
Capacitance
10
8
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
V
= 15 V
= 13 A
V
= 10 V
DS
GS
I
D
I = 13 A
D
6
4
2
0
0
5
10
15
20
25
30
- 50 - 25
0
25
50
75
100 125 150
Q
g
- Total Gate Charge (nC)
T - Junction Temperature (°C)
J
Gate Charge
On-Resistance vs. Junction Temperature
0.05
0.04
0.03
0.02
0.01
0
50
10
T = 150 °C
J
T = 25 °C
J
I
D
= 13 A
1
0
2
4
6
8
10
0
0.2
0.4
0.6
0.8
1.0
1.2
V
GS
- Gate-to-Source Voltage (V)
V
SD
- Source-to-Drain Voltage (V)
Source-Drain Diode Forward Voltage
On-Resistance vs. Gate-to-Source Voltage
Document Number: 71142
S09-0869-Rev. B, 18-May-09
www.vishay.com
3
Si4886DY
Vishay Siliconix
TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
0.4
60
50
0.2
I
D
= 250 µA
0.0
- 0.2
- 0.4
- 0.6
- 0.8
40
30
20
10
0
- 50 - 25
0
25
50
75
100 125 150
0.01
0.1
1
10
30
T - Temperature (°C)
J
Time (s)
Threshold Voltage
Single Pulse Power
2
1
Duty Cycle = 0.5
0.2
Notes:
0.1
P
DM
0.1
0.05
t
1
t
2
t
t
1
1. Duty Cycle, D =
0.02
2
2. Per Unit Base = R
= 68 °C/W
thJA
(t)
3. T
- T = P
Z
JM
A
DM thJA
Single Pulse
4. Surface Mounted
0.01
-4
-3
-2
-1
10
10
10
10
1
10
100
600
Square Wave Pulse Duration (s)
Normalized Thermal Transient Impedance, Junction-to-Ambient
2
1
Duty Cycle = 0.5
0.2
0.1
0.1
0.05
0.02
Single Pulse
0.01
-4
-3
-2
-1
10
10
10
10
1
10
Square Wave Pulse Duration (s)
Normalized Thermal Transient Impedance, Junction-to-Foot
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?71142.
www.vishay.com
4
Document Number: 71142
S09-0869-Rev. B, 18-May-09
Package Information
Vishay Siliconix
SOIC (NARROW): 8-LEAD
JEDEC Part Number: MS-012
8
6
7
2
5
4
E
H
1
3
S
h x 45
D
C
0.25 mm (Gage Plane)
A
All Leads
0.101 mm
q
e
B
A
1
L
0.004"
MILLIMETERS
Max
INCHES
DIM
A
Min
Min
Max
1.35
0.10
0.35
0.19
4.80
3.80
1.75
0.20
0.51
0.25
5.00
4.00
0.053
0.004
0.014
0.0075
0.189
0.150
0.069
0.008
0.020
0.010
0.196
0.157
A1
B
C
D
E
e
1.27 BSC
0.050 BSC
H
h
5.80
0.25
0.50
0°
6.20
0.50
0.93
8°
0.228
0.010
0.020
0°
0.244
0.020
0.037
8°
L
q
S
0.44
0.64
0.018
0.026
ECN: C-06527-Rev. I, 11-Sep-06
DWG: 5498
Document Number: 71192
11-Sep-06
www.vishay.com
1
VISHAY SILICONIX
TrenchFET® Power MOSFETs
Application Note 808
Mounting LITTLE FOOT®, SO-8 Power MOSFETs
Wharton McDaniel
0.288
7.3
Surface-mounted LITTLE FOOT power MOSFETs use
integrated circuit and small-signal packages which have
0.050
1.27
0.088
2.25
been been modified to provide the heat transfer capabilities
required by power devices. Leadframe materials and
design, molding compounds, and die attach materials have
been changed, while the footprint of the packages remains
the same.
0.088
2.25
0.027
0.69
0.078
1.98
0.2
5.07
See Application Note 826, Recommended Minimum Pad
Patterns With Outline Drawing Access for Vishay Siliconix
MOSFETs, (http://www.vishay.com/ppg?72286), for the
basis of the pad design for a LITTLE FOOT SO-8 power
MOSFET. In converting this recommended minimum pad
to the pad set for a power MOSFET, designers must make
two connections: an electrical connection and a thermal
connection, to draw heat away from the package.
Figure 2. Dual MOSFET SO-8 Pad Pattern
With Copper Spreading
The minimum recommended pad patterns for the
single-MOSFET SO-8 with copper spreading (Figure 1) and
dual-MOSFET SO-8 with copper spreading (Figure 2) show
the starting point for utilizing the board area available for the
heat-spreading copper. To create this pattern, a plane of
copper overlies the drain pins. The copper plane connects
the drain pins electrically, but more importantly provides
planar copper to draw heat from the drain leads and start the
process of spreading the heat so it can be dissipated into the
ambient air. These patterns use all the available area
underneath the body for this purpose.
In the case of the SO-8 package, the thermal connections
are very simple. Pins 5, 6, 7, and 8 are the drain of the
MOSFET for a single MOSFET package and are connected
together. In a dual package, pins 5 and 6 are one drain, and
pins 7 and 8 are the other drain. For a small-signal device or
integrated circuit, typical connections would be made with
traces that are 0.020 inches wide. Since the drain pins serve
the additional function of providing the thermal connection
to the package, this level of connection is inadequate. The
total cross section of the copper may be adequate to carry
the current required for the application, but it presents a
large thermal impedance. Also, heat spreads in a circular
fashion from the heat source. In this case the drain pins are
the heat sources when looking at heat spread on the PC
board.
Since surface-mounted packages are small, and reflow
soldering is the most common way in which these are
affixed to the PC board, “thermal” connections from the
planar copper to the pads have not been used. Even if
additional planar copper area is used, there should be no
problems in the soldering process. The actual solder
connections are defined by the solder mask openings. By
combining the basic footprint with the copper plane on the
drain pins, the solder mask generation occurs automatically.
0.288
7.3
0.050
1.27
0.196
5.0
A final item to keep in mind is the width of the power traces.
The absolute minimum power trace width must be
determined by the amount of current it has to carry. For
thermal reasons, this minimum width should be at least
0.020 inches. The use of wide traces connected to the drain
plane provides a low impedance path for heat to move away
from the device.
0.027
0.69
0.078
1.98
0.2
5.07
Figure 1. Single MOSFET SO-8 Pad
Pattern With Copper Spreading
Document Number: 70740
Revision: 18-Jun-07
www.vishay.com
1
Application Note 826
Vishay Siliconix
RECOMMENDED MINIMUM PADS FOR SO-8
0.172
(4.369)
0.028
(0.711)
0.022
0.050
(0.559)
(1.270)
Recommended Minimum Pads
Dimensions in Inches/(mm)
Return to Index
www.vishay.com
22
Document Number: 72606
Revision: 21-Jan-08
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号：
SI4888DY-T1-GE3
TRANSISTOR 11000 mA, 30 V, N-CHANNEL, Si, SMALL SIGNAL, MOSFET, HALOGEN FREE AND ROHS COMPLIANT, SOP-8, FET General Purpose Small Signal
VISHAY
SI4890BDY-T1-E3
TRANSISTOR 16 A, 30 V, 0.012 ohm, N-CHANNEL, Si, POWER, MOSFET, ROHS COMPLIANT, SOP-8, FET General Purpose Power
VISHAY
SI4892DY-T1-E3
TRANSISTOR 8800 mA, 30 V, N-CHANNEL, Si, SMALL SIGNAL, MOSFET, ROHS COMPLIANT, SOP-8, FET General Purpose Small Signal
VISHAY
SI4892DY-T1-GE3
TRANSISTOR 8800 mA, 30 V, N-CHANNEL, Si, SMALL SIGNAL, MOSFET, HALOGEN FREE AND ROHS COMPLIANT, SOP-8, FET General Purpose Small Signal
VISHAY
SI4894BDY-T1-E3
TRANSISTOR 8900 mA, 30 V, N-CHANNEL, Si, SMALL SIGNAL, MOSFET, ROHS COMPLIANT, SOP-8, FET General Purpose Small Signal
VISHAY
SI4894BDY-T1-GE3
TRANSISTOR 8900 mA, 30 V, N-CHANNEL, Si, SMALL SIGNAL, MOSFET, HALOGEN FREE AND ROHS COMPLIANT, SOP-8, FET General Purpose Small Signal
VISHAY
©2020 ICPDF网 联系我们和版权申明