SIP32402ADNP-T1GE4 [VISHAY]
IC AUDIO/VIDEO SWITCH, Multiplexer or Switch;
| 型号： | SIP32402ADNP-T1GE4 |
| 厂家： | 
VISHAY |
| 描述： | IC AUDIO/VIDEO SWITCH, Multiplexer or Switch |
| 文件： | 总13页 (文件大小：217K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SiP32401A, SiP32402A
www.vishay.com
Vishay Siliconix
1.1 V to 5.5 V, Slew Rate Controlled Load Switch
DESCRIPTION
FEATURES
SiP32401A and SiP32402A are slew rate controlled load
switches designed for 1.1 V to 5.5 V operation.
• 1.1 V to 5.5 V operation voltage range
• 62 mΩ typical from 2 V to 5 V
The devices guarantee low switch on-resistance at 1.2 V
input. They feature a controlled soft-on slew rate of typical
2.5 ms that limits the inrush current for designs of heavy
capacitive load and minimizes the resulting voltage droop at
the power rails.
• Low Ron down to 1.2 V
• Slew rate controlled turn-on: 2.5 ms at 3.6 V
• Fast shutdown load discharge for SiP32402A
Available
• Low quiescent current
< 1 μA when disabled
10.5 μA typical at VIN = 1.2 V
These devices feature low voltage control logic interface
(On/Off interface) that can interface with low voltage control
signal without extra level shifting circuit. SiP32402A also
integrates an output discharge switch that enables fast
shutdown load discharge.
• Reverse current blocking when switch is off
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Both SiP32401A and SiP32402A have exceptionally low
shutdown current and provide reverse blocking to prevent
high current flowing into the power source.
APPLICATIONS
• PDAs / smart phones
SiP32401A and SiP32402A are in TDFN4 package of
1.2 mm by 1.6 mm.
• Notebook / netbook computers
• Tablet PC
• Portable media players
• Digital camera
• GPS navigation devices
• Data storage devices
• Optical, industrial, medical, and healthcare devices
TYPICAL APPLICATION CIRCUIT
V
IN
IN
OUT
V
OUT
SiP32401A, SiP32402A
C
C
IN
OUT
4.7 µF
0.1 µF
EN
GND
EN
GND
GND
Fig. 1 - SiP32401A, SiP32402A Typical Application Circuit
S15-1246-Rev. D, 01-Jun-15
Document Number: 63705
1
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SiP32401A, SiP32402A
www.vishay.com
Vishay Siliconix
ORDERING INFORMATION
TEMPERATURE RANGE
PACKAGE
MARKING
PART NUMBER
Gx
Hx
SiP32401ADNP-T1GE4
SiP32402ADNP-T1GE4
-40 °C to +85 °C
TDFN4 1.2 mm x 1.6 mm
Notes
•
•
x = Lot code
GE4 denotes halogen-free and RoHS-compliant
ABSOLUTE MAXIMUM RATINGS
PARAMETER
LIMIT
-0.3 to +6
-0.3 to +6
-0.3 to VIN + 0.3
2.4
UNIT
Supply Input Voltage (VIN)
Enable Input Voltage (VEN
Output Voltage (VOUT
Maximum Continuous Switch Current (Imax.
)
V
)
c
)
A
Maximum Repetitive Pulsed Current (1 ms, 10 % Duty Cycle) c
3
ESD Rating (HBM)
4000
V
Junction Temperature (TJ)
-40 to +125
170
°C
a
Thermal Resistance (θJA
)
°C/W
mW
Power Dissipation (PD) a, b
324
Notes
a. Device mounted with all leads and power pad soldered or welded to PC board, see PCB layout.
b. Derate 5.9 mW/°C above TA = 70 °C, see PCB layout.
c. TA = 25 °C, see PCB layout
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating/conditions for extended periods may affect device reliability.
RECOMMENDED OPERATING RANGE
PARAMETER
LIMIT
UNIT
V
Input Voltage Range (VIN)
Operating Junction Temperature Range (TJ)
1.1 to 5.5
-40 to +125
°C
S15-1246-Rev. D, 01-Jun-15
Document Number: 63705
2
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SiP32401A, SiP32402A
www.vishay.com
Vishay Siliconix
SPECIFICATIONS
LIMITS
-40 °C to +85 °C
TEST CONDITIONS UNLESS SPECIFIED
IN = 5 V, TA = -40 °C to +85 °C
V
PARAMETER
SYMBOL
UNIT
(typical values are at TA = 25 °C)
MIN. a
TYP. b
MAX. a
5.5
17
30
50
90
110
180
1
Operating Voltage c
VIN
1.1
-
10.5
21
34
54
68
105
-
V
VIN = 1.2 V, EN = active
VIN = 1.8 V, EN = active
-
-
VIN = 2.5 V, EN = active
VIN = 3.6 V, EN = active
VIN = 4.3 V, EN = active
-
Quiescent Current
IQ
-
-
μA
V
IN = 5 V, EN = active
-
Off Supply Current
IQ(off)
IDS(off)
IRB
EN = inactive, OUT = open
EN = inactive, OUT = GND
-
Off Switch Current
-
-
1
Reverse Blocking Current
VOUT = 5 V, VIN = 0 V, VEN = inactive
VIN = 1.2 V, IL = 100 mA, TA = 25 °C
VIN = 1.8 V, IL = 100 mA, TA = 25 °C
-
-
10
76
72
72
72
72
72
-
-
66
62
62
62
62
62
4250
-
-
V
V
V
IN = 2.5 V, IL = 100 mA, TA = 25 °C
IN = 3.6 V, IL = 100 mA, TA = 25 °C
IN = 4.3 V, IL = 100 mA, TA = 25 °C
-
On-Resistance
RDS(on)
TCRDS
VIL
mΩ
-
-
VIN = 5 V, IL = 100 mA, TA = 25 °C
-
On-Resistance Temp.-Coefficient
EN Input Low Voltage c
-
ppm/°C
VIN = 1.2 V
VIN = 1.8 V
VIN = 2.5 V
VIN = 3.6 V
VIN = 4.3 V
VIN = 5 V
-
0.3
0.4 d
0.5 d
0.6 d
0.7 d
0.8 d
-
-
-
-
-
-
-
-
-
-
-
V
VIN = 1.2 V
0.9 d
1.2 d
1.4 d
1.6 d
1.7 d
1.8
-1
-
V
IN = 1.8 V
IN = 2.5 V
-
-
V
-
-
EN Input High Voltage c
VIH
VIN = 3.6 V
IN = 4.3 V
IN = 5 V
VEN = 5.5 V
-
-
V
-
-
V
-
-
EN Input Leakage
ISINK
RPD
td(on)
t(on)
-
1
μA
Output Pulldown Resistance
Output Turn-On Delay Time
Output Turn-On Rise Time
Output Turn-Off Delay Time
EN = inactive, TA = 25 °C (for SiP32402A only)
-
217
1.8
2.5
-
280
-
Ω
-
VIN = 3.6 V, RLOAD = 10 Ω, TA = 25 °C
1.2
-
3.8
0.001
ms
td(off)
Notes
a. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum.
b. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
c. For VIN outside this range consult typical EN threshold curve.
d. Not tested, guarantee by design.
S15-1246-Rev. D, 01-Jun-15
Document Number: 63705
3
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SiP32401A, SiP32402A
www.vishay.com
PIN CONFIGURATION
Vishay Siliconix
EN
IN
4
3
1
2
OUT
GND
Bottom View
GND
Fig. 2 - TDFN4 1.2 mm x 1.6 mm Package
PIN DESCRIPTION
PIN NUMBER
NAME
FUNCTION
1
OUT
GND
IN
This is the output pin of the switch
2
3
4
Ground connection
This is the input pin of the switch
Enable input
EN
TYPICAL CHARACTERISTICS (internally regulated, 25 °C, unless otherwise noted)
140
120
100
80
120
100
80
60
40
20
0
VIN = 5 V
V
IN = 3.6 V
60
40
20
VIN = 1.2 V
0
1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
IN (V)
- 40
- 20
0
20
40
60
80
100
V
Temperature (°C)
Fig. 3 - Quiescent Current vs. Input Voltage
Fig. 5 - Quiescent Current vs. Temperature
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
100
10
1
0.1
VIN = 5 V
VIN = 3.6 V
0.01
0.001
VIN = 1.2 V
- 40
- 20
0
20
40
60
80
100
1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
VIN (V)
Temperature (°C)
Fig. 4 - Off Supply Current vs. Input Voltage
Fig. 6 - Off Supply Current vs. Temperature
S15-1246-Rev. D, 01-Jun-15
Document Number: 63705
4
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SiP32401A, SiP32402A
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (internally regulated, 25 °C, unless otherwise noted)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
1000
100
10
VIN = 5 V
1
VIN = 3.6 V
0.1
0.01
0.001
0.0001
V
IN = 1.2 V
- 40
- 20
0
20
40
60
80
100
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
Temperature (°C)
VIN (V)
Fig. 7 - Off Switch Current vs. Input Voltage
Fig. 10 - Off Switch Current vs. Temperature
78
76
74
72
70
68
66
64
62
60
85
80
75
70
65
60
55
50
45
VIN = 5 V
IO = 0.1 mA
IO = 2 A
IO = 1.2 A
IO = 1 A
IO = 0.2 A
IO = 0.1 A
1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
(V)
- 40
- 20
0
20
40
60
80
100
V
Temperature (°C)
IN
Fig. 8 - RDS(on) vs. VIN
Fig. 11 - RDS(on) vs. Temperature
300
280
260
240
220
200
180
160
600
550
500
450
400
350
300
250
200
150
100
VOUT = VIN = 5 V
VOUT = VIN
SiP32402A only
SiP32402A only
1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
VIN (V)
- 40
- 20
0
20
40
60
80
100
Temperature (°C)
Fig. 9 - Output Pull Down vs. Input Voltage
Fig. 12 - Output Pull Down vs. Temperature
Document Number: 63705
S15-1246-Rev. D, 01-Jun-15
5
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SiP32401A, SiP32402A
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (internally regulated, 25 °C, unless otherwise noted)
0
- 2
3
2.5
2
VIN = 5 V
L = 0.1 μF
C
RL = 10 Ω
- 4
- 6
1.5
1
- 8
VIN = 0 V
VEN = 0 V
- 10
- 12
0.5
0
- 40
0.5
1
1.5
2
2.5
VOUT (V)
3
3.5
4
4.5
5
5.5
- 20
0
20
40
60
80
100
Temperature (°C)
Fig. 13 - Reverse Blocking Current vs. Output Voltage
Fig. 16 - Turn-on Delay Time vs. Temperature
0.30
0.25
0.20
0.15
0.10
0.05
0.00
5.0
VIN = 5 V
CL = 0.1 μF
VIN = 5 V
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
CL = 0.1 μF
RL = 10 Ω
RL = 10 Ω
- 40
- 20
0
20
40
60
80
100
- 40
- 20
0
20
40
60
80
100
Temperature (°C)
Temperature (°C)
Fig. 14 - Rise Time vs. Temperature
Fig. 17 - Turn-Off Delay Time vs. Temperature
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.4
VIH
VIL
1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
VIN (V)
Fig. 15 - EN Threshold Voltage vs. Input Voltage
S15-1246-Rev. D, 01-Jun-15
Document Number: 63705
6
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SiP32401A, SiP32402A
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (internally regulated, 25 °C, unless otherwise noted)
EN
EN
5VOUT
5VOUT
3.6VOUT
3.6VOUT
1.5VOUT
1.5VOUT
IOUT for 5VOUT
IOUT for 5VOUT
I
OUT for 3.6VOUT
I
OUT for 3.6VOUT
OUT for 1.5VOUT
I
OUT for 1.5VOUT
I
2 V/Div, 2 A/Div, 2 ms/Div
Fig. 18 - Typical Turn-on Delay, Rise Time
Fig. 21 - Typical Fall Time
COUT = 0.1 μF, CIN = 4.7 μF, IOUT = 1.5 A
C
OUT = 0.1 μF, CIN = 4.7 μF, IOUT = 1.5 A
EN
EN
5VOUT
5VOUT
3.6VOUT
3.6VOUT
1.5VOUT
1.5VOUT
I
OUT for 5VOUT
OUT for 3.6VOUT
OUT for 1.5VOUT
I
OUT for 5VOUT
OUT for 3.6VOUT
OUT for 1.5VOUT
I
I
I
I
2 V/Div, 0.25 A/Div, 2 ms/Div
Fig. 19 - Typical Turn-on Delay, Rise Time
OUT = 0.1 μF, CIN = 4.7 μF, ROUT = 10 Ω
Fig. 22 - Typical Fall Time
COUT = 0.1 μF, CIN = 4.7 μF, ROUT = 10 Ω
C
EN
EN
5VOUT
5VOUT
3.6VOUT
3.6VOUT
1.5VOUT
1.5VOUT
IOUT for 5VOUT
IOUT for 5VOUT
IOUT for 3.6VOUT
I
OUT for 3.6VOUT
IOUT for 1.5VOUT
I
OUT for 1.5VOUT
2 V/Div, 2 A/Div, 2 ms/Div
Fig. 23 - Typical Fall Time
2 V/Div, 2 A/Div, 2 ms/Div
Fig. 20 - Typical Turn-on Delay, Rise Time
OUT = 200 μF, CIN = 4.7 μF, IOUT = 1.5 A
C
COUT = 200 μF, CIN = 4.7 μF, IOUT = 1.5 A
S15-1246-Rev. D, 01-Jun-15
Document Number: 63705
7
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SiP32401A, SiP32402A
www.vishay.com
Vishay Siliconix
EN
EN
5VOUT
5VOUT
3.6VOUT
1.5VOUT
3.6VOUT
1.5VOUT
IOUT for 5VOUT
IOUT for 5VOUT
IOUT for 3.6VOUT
IOUT for 3.6VOUT
IOUT for 1.5VOUT
IOUT for 1.5VOUT
2 V/Div, 0.25 A/Div, 2 ms/Div
Fig. 24 - Typical Turn-on Delay, Rise Time
2 V/Div, 0.25 A/Div, 2 ms/Div
Fig. 25 - Typical Fall Time
C
OUT = 200 μF, CIN = 4.7 μF, ROUT = 10 Ω
COUT = 200 μF, CIN = 4.7 μF, ROUT = 10 Ω
BLOCK DIAGRAM
Reverse
Blocking
IN
OUT
Charge
Pump
Turn On
Slew Rate Control
Control
Logic
EN
Note: for SiP32402A only
GND
Fig. 26 - Functional Block Diagram
S15-1246-Rev. D, 01-Jun-15
Document Number: 63705
8
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SiP32401A, SiP32402A
www.vishay.com
PCB LAYOUT
Vishay Siliconix
Top
Bottom
Fig. 27 - PCB Layout for TDFN4 1.2 mm x 1.6 mm (type: FR4, size: 1" x 1", thickness: 0.062", copper thickness: 2 oz.)
DETAILED DESCRIPTION
SiP32401A and SiP32402A are advanced slew rate
Enable
controlled high side load switch consisted of a n-channel
power switch. When the device is enable the gate of the
power switch is turned on at a controlled rate to avoid
excessive in-rush current. Once fully on the gate to source
voltage of the power switch is biased at a constant level. The
design gives a flat on resistance throughout the operating
voltages. When the device is off, the reverse blocking
circuitry prevents current from flowing back to input if output
is raised higher than input. The reverse blocking mechanism
also works in case of no input applied. The SiP32402A also
integrates an output discharge switch which allows fast
output discharge.
The EN pin is compatible with both TTL and CMOS logic
voltage levels.
Protection Against Reverse Voltage Condition
Both SiP32401A and SiP32402A contain reverse blocking
circuitry to protect the current from going to the input from
the output in case where the output voltage is higher than
the input voltage when the main switch is off. Reverse
blocking works for input voltage as low as 0 V.
Thermal Considerations
SiP32401A and SiP32402A are designed to maintain a
constant output load current. Due to physical limitations of
the layout and assembly of the device the maximum switch
current is 2.8 A, as stated in the Absolute Maximum Ratings
table. However, another limiting characteristic for the safe
operating load current is the thermal power dissipation of
the package. To obtain the highest power dissipation (and a
thermal resistance of 170 °C/W) the power pad of the device
should be connected to a heat sink on the printed circuit
board. Figure 23 shows a typical PCB layout. All copper
traces and vias for the IN and OUT pins should be sized
adequately to carry the maximum continuous current.
APPLICATION INFORMATION
Input Capacitor
The SiP32401A and SiP32402A do not require an input
capacitor. To limit the voltage drop on the input supply
caused by transient inrush currents, an input bypass
capacitor is recommended. A 2.2 μF ceramic capacitor
placed as close to the VIN and GND should be enough.
Higher values capacitor can help to further reduce the
voltage drop. Ceramic capacitors are recommended for
their ability to withstand input current surge from low
impedance sources such as batteries in portable devices.
The maximum power dissipation in any application is
dependant on the maximum junction temperature,
TJ (max.) = 125 °C, the junction-to-ambient thermal
Output Capacitor
resistance for the TDFN4 1.2 mm x 1.6 mm package, θJ-A
=
While these devices works without an output capacitor,
an 0.1 μF or larger capacitor across VOUT and GND is
recommended to accommodate load transient condition. It
also help to prevent parasitic inductance forces VOUT below
GND when switching off. Output capacitor has minimal
affect on device’s turn on slew rate time. There is no
requirement on capacitor type and its ESR.
170 °C/W, and the ambient temperature, TA, which may be
formulaically expressed as:
TJ (max.) - T
125 - T
170
A
A
P (max.)
=
=
θ
J-
A
S15-1246-Rev. D, 01-Jun-15
Document Number: 63705
9
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SiP32401A, SiP32402A
www.vishay.com
Vishay Siliconix
It then follows that, assuming an ambient temperature of
70 °C, the maximum power dissipation will be limited to
about 324 mW.
Recommended Board Layout
For the best performance, all traces should be as short as
possible to minimize the inductance and parasitic effects.
The input and output capacitors should be kept as close
as possible to the input and output pins respectively.
Connecting the central exposed pad to GND, using wide
traces for input, output, and GND help reducing the case to
ambient thermal impedance.
So long as the load current is below the 2.8 A limit, the
maximum continuous switch current becomes a function of
two things: the package power dissipation and the RDS(on) at
the ambient temperature.
As an example let us calculate the worst case maximum
load current at TA = 70 °C. The worst case RDS(on) at 25 °C
occurs at an input voltage of 1.2 V and is equal to 76 mΩ.
The RDS(on) at 70 °C can be extrapolated from this data using
the following formula:
R
DS(on) (at 70 °C) = RDS(on) (at 25 °C) x (1 + TC x DT)
Where TC is 4250 ppm/°C. Continuing with the calculation
we have
R
DS(on) (at 70 °C) = 76 mΩ x (1 + 0.00425 x (70 °C - 25 °C))
= 90.5 mΩ
The maximum current limit is then determined by
P (max.)
I
(max.) <
LOAD
R
(
on)
DS
which in case is 1.9 A. Under the stated input voltage
condition, if the 1.9 A current limit is exceeded the internal
die temperature will rise and eventually, possibly damage
the device.
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?63705.
S15-1246-Rev. D, 01-Jun-15
Document Number: 63705
10
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
www.vishay.com
Vishay Siliconix
TDFN4 1.2 x 1.6 Case Outline
D
D2
b
3
4
3
Pin #1 ID
(Optional)
4
2
1
1
2
e
Index Area
(D/2 x E/2)
Bottom View
Top View
Side View
MILLIMETERS
INCHES
DIM.
MIN.
0.45
0.00
NOM.
0.55
-
MAX.
0.60
MIN.
0.017
0.00
NOM.
0.022
MAX.
0.024
0.002
A
A1
A3
b
0.05
-
0.15 REF. or 0.127 REF. (1)
0.006 or 0.005 (1)
0.20
1.15
0.81
0.25
1.20
0.30
1.25
0.91
0.008
0.045
0.032
0.010
0.012
0.049
0.036
D
0.047
D2
e
0.86
0.034
0.50 BSC
1.60
0.020
E
1.55
0.45
1.65
0.55
0.061
0.018
0.063
0.065
0.022
E2
K
0.50
0.020
0.25 typ.
0.30
0.010 typ.
0.012
L
0.25
0.35
0.010
0.014
ECN: T16-0143-Rev. C, 18-Apr-16
DWG: 5995
Note
(1)
The dimension depends on the leadframe that assembly house used.
Revision: 18-Apr-16
Document Number: 65734
1
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PAD Pattern
Vishay Siliconix
RECOMMENDED MINIMUM PADS FOR TDFN4 1.2 x 1.6
0.86
0.50
0.30
3
4
1
2
Recommended Minimum Pads
Dimensions in mm
Document Number: 66558
Revision: 05-Mar-10
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号：
SIP32416DNP-T1-GE4
IC 2.4 A DUAL SWITCHING CONTROLLER, PDSO8, 2 X 2 MM, HALOGEN FREE AND ROHS COMPLIANT, TDFN-8, Switching Regulator or Controller
VISHAY
©2020 ICPDF网 联系我们和版权申明