SMBG51A-M3/52 [VISHAY]

TVS DIODE 51V 82.4V DO215AA;


型号：	SMBG51A-M3/52
厂家：	VISHAY
描述：	TVS DIODE 51V 82.4V DO215AA 电视
文件：	总5页 (文件大小：91K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SMBG5.0A thru SMBG188CA

www.vishay.com

Vishay General Semiconductor

Surface Mount TRANSZORB Transient Voltage Suppressors

FEATURES

• Low profile package

• Ideal for automated placement

• Glass passivated chip junction

• Available in uni-directional and bi-directional

• 600 W peak pulse power capability with a 10/1000 μs

waveform, repetitive rate (duty cycle): 0.01 %

• Excellent clamping capability

• Very fast response time

SMBG (DO-215AA)

• Low incremental surge resistance

• Meets MSL level 1, per J-STD-020, LF maximum peak of

260 °C

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

PRIMARY CHARACTERISTICS

V_WM

5.0 V to 188 V

TYPICAL APPLCIATIONS

_BR(uni-directional)

6.4 V to 231 V

Use in sensitive electronics protection against voltage

transients induced by inductive load switching and lighting

on ICs, MOSFET, signal lines of sensor units for consumer,

computer, industrial, and telecommunication.

_BR(bi-directional)

P_PPM

6.4 V to 231 V

600 W

_FSM(uni-directional only)

100 A

T_Jmax.

150 °C

MECHANICAL DATA

Polarity

Uni-directional, bi-directional

SMBG (DO-215AA)

Case: SMBG (DO-215AA)

Molding compound meets UL 94 V-0 flammability rating

Package

Base P/N-M3

commercial grade

- halogen-free, RoHS-compliant, and



DEVICES FOR BI-DIRECTION APPLICATIONS

For bi-directional devices use CA suffix (e.g. SMBG10CA).

Electrical characteristics apply in both directions.

Terminals: matte tin plated leads, solderable per

J-STD-002 and JESD22-B102

M3 suffix meets JESD 201 class 2 whisker test

Polarity: for uni-directional types the band denotes cathode

end, no marking on bi-directional types

MAXIMUM RATINGS (T_A= 25 °C, unless otherwise noted)

PARAMETER

SYMBOL

P_PPM

VALUE

600

UNIT

Peak pulse power dissipation with a 10/1000 μs waveform (fig. 1) ⁽¹⁾⁽²⁾

Peak pulse current with a 10/1000 μs waveform ⁽¹⁾

Peak forward surge current 8.3 ms single half sine-wave ⁽²⁾

Operating junction and storage temperature range

I_PPM

See next table

I_FSM

T_J, T_STG

-65 to +175

°C

Notes

(1)

Non-repetitive current pulse, per fig. 3 and derated above T_A= 25 °C per fig. 2

Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal

(2)

Revision: 16-Jan-18

Document Number: 89421

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SMBG5.0A thru SMBG188CA

www.vishay.com

Vishay General Semiconductor

ELECTRICAL CHARACTERISTICS (T_A= 25 °C unless otherwise noted)

DEVICE

MARKING

CODE

BREAKDOWN

VOLTAGE

MAXIMUM

REVERSE

LEAKAGE

AT V_WM

MAXIMUM

CLAMPING

VOLTAGE

AT I_PPM

TEST

CURRENT

I_T

STAND-OFF

VOLTAGE

V_WM

MAXIMUM

PEAK PULSE

CURRENT

DEVICE TYPE

MODIFIED

GULL WING

_BRAT I_T(V) ⁽¹⁾

(mA)

(V)

_PPM(A) ⁽²⁾

UNI

MIN.

MAX.

I_D(μA) ⁽³⁾

V_C(V)

⁽⁺⁾SMBG5.0A ⁽⁵⁾

⁽⁺⁾SMBG6.0A

⁽⁺⁾SMBG6.5A

⁽⁺⁾SMBG7.0A

⁽⁺⁾SMBG7.5A

⁽⁺⁾SMBG8.0A

⁽⁺⁾SMBG8.5A

⁽⁺⁾SMBG9.0A

⁽⁺⁾SMBG10A

⁽⁺⁾SMBG11A

⁽⁺⁾SMBG12A

⁽⁺⁾SMBG13A

⁽⁺⁾SMBG14A

⁽⁺⁾SMBG15A

⁽⁺⁾SMBG16A

⁽⁺⁾SMBG17A

⁽⁺⁾SMBG18A

⁽⁺⁾SMBG20A

⁽⁺⁾SMBG22A

⁽⁺⁾SMBG24A

⁽⁺⁾SMBG26A

⁽⁺⁾SMBG28A

⁽⁺⁾SMBG30A

⁽⁺⁾SMBG33A

⁽⁺⁾SMBG36A

⁽⁺⁾SMBG40A

⁽⁺⁾SMBG43A

⁽⁺⁾SMBG45A

⁽⁺⁾SMBG48A

⁽⁺⁾SMBG51A

⁽⁺⁾SMBG54A

⁽⁺⁾SMBG58A

⁽⁺⁾SMBG60A

⁽⁺⁾SMBG64A

⁽⁺⁾SMBG70A

⁽⁺⁾SMBG75A

⁽⁺⁾SMBG78A

⁽⁺⁾SMBG85A

⁽⁺⁾SMBG90A

⁽⁺⁾SMBG100A

⁽⁺⁾SMBG110A

⁽⁺⁾SMBG120A

⁽⁺⁾SMBG130A

⁽⁺⁾SMBG150A

⁽⁺⁾SMBG160A

⁽⁺⁾SMBG170A

SMBG188A

6.40

6.67

7.22

7.78

8.33

8.89

9.44

10.0

11.1

12.2

13.3

14.4

15.6

16.7

17.8

18.9

20.0

22.2

24.4

26.7

28.9

31.1

33.3

36.7

40.0

44.4

47.8

50.0

53.3

56.7

60.0

64.4

66.7

71.1

77.8

83.3

86.7

94.4

100

7.07

7.37

7.98

8.60

9.21

9.83

10.4

11.1

12.3

13.5

14.7

15.9

17.2

18.5

19.7

20.9

22.1

24.5

26.9

29.5

31.9

34.4

36.8

40.6

44.2

49.1

52.8

55.3

58.9

62.7

66.3

71.2

73.7

78.6

86.0

92.1

95.8

104

5.0

6.0

6.5

7.0

7.5

8.0

8.5

9.0

800

500

200

100

65.2

58.3

53.6

50.0

46.5

44.1

41.7

39.0

35.3

33.0

30.2

27.9

25.9

24.6

23.1

21.7

20.5

18.5

16.9

15.4

14.3

13.2

12.4

11.3

10.3

9.3

8.6

8.3

7.8

7.3

6.9

6.4

6.2

5.8

5.3

5.0

4.8

4.4

4.1

3.7

3.4

3.1

9.2

10.3

11.2

12.0

12.9

13.6

14.4

15.4

17.0

18.2

19.9

21.5

23.2

24.4

26.0

27.6

29.2

32.4

35.5

38.9

42.1

45.4

48.4

53.3

58.1

64.5

69.4

72.7

77.4

82.4

87.1

93.6

96.8

103

1.0

5.0

1.0

113

121

126

137

146

162

177

193

209

243

259

275

111

123

135

147

159

185

197

209

111

122

133

144

167

178

189

209

100

110

120

130

150

160

170

188

2.9

2.5

2.3

2.2

231

2.0

328

Notes

(1)

(2)

(3)

(4)

(5)

(6)

(+)

Pulse test: t_p 50 ms

Surge current waveform per fig. 3 and derate per fig. 2

For bi-directional types having V_WMof 10 V and less, the I_Dlimit is doubled

All terms and symbols are consistent with ANSI/IEEE C62.35

For the bi-directional SMA5J5.0CA, the maximum V_BRis 7.25 V

V_F= 3.5 V at I_F= 25 A (uni-directional only)

Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number

E136766 for both uni-directional and bi-directional devices

Revision: 16-Jan-18

Document Number: 89421

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SMBG5.0A thru SMBG188CA

www.vishay.com

Vishay General Semiconductor

THERMAL CHARACTERISTICS (T_A= 25 °C unless otherwise noted)

PARAMETER

SYMBOL

VALUE

100

UNIT

°C/W

(1)

Typical thermal resistance, junction to ambient

Typical thermal resistance, junction to lead

R_JA

R_JL

Note

(1)

Mounted on minimum recommended pad layout

ORDERING INFORMATION (Example)

PREFERRED P/N

SMBG5.0A-M3/52

SMBG5.0A-M3/5B

UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY

DELIVERY MODE

0.096

750

7" diameter plastic tape and reel

13" diameter plastic tape and reel

3200

RATINGS AND CHARACTERISTICS CURVES (T_A= 25 °C unless otherwise noted)

100

150

T_J= 25 °C

Pulse Width (t_d)

is defined as the Point

where the Peak Current

decays to 50 % of I_PPM

t_r= 10 µs

Peak Value

I_PPM

100

Half Value - I_PP

I_PPM

10/1000 µs Waveform

as defined by R.E.A.

0.2 x 0.2" (5.0 x 5.0 mm)

Copper Pad Areas

t_d

0.1

0.1 µs

1.0 µs

10 µs

100 µs

1.0 ms

10 ms

1.0

3.0

4.0

2.0

t_d- Pulse Width (s)

t - Time (ms)

Fig. 1 - Peak Pulse Power Rating Curve

Fig. 3 - Pulse Waveform

100

6000

1000

Measured at

Zero Bias

V_R, Measured at

Stand-Off

Voltage V_WM

100

T_J= 25 °C

f = 1.0 MHz

Uni-Directional

Bi-Directional

V_sig= 50 mVp-p

100 200

100 125

150 175

200

T_J- Initial Temperature (°C)

V_WM- Reverse Stand-Off Voltage (V)

Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature

Fig. 4 - Typical Junction Capacitance

Revision: 16-Jan-18

Document Number: 89421

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SMBG5.0A thru SMBG188CA

www.vishay.com

Vishay General Semiconductor

100

200

8.3 ms Single Half Sine-Wave

Uni-Directional Only

100

1.0

0.1

0.001

0.01

0.1

100

1000

100

t_p- Pulse Duration (s)

Number of Cycles at 60 Hz

Fig. 5 - Typical Transient Thermal Impedance

Fig. 6 - Maximum Non-Repetitive Peak Forward Surge Current

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

SMBG (DO-215AA)

Cathode Band

Mounting Pad Layout

0.165 (4.19)

0.155 (3.94)

0.130 (3.30)

0.083 (2.10)

0.077 (1.96)

0.085 (2.16)

0.060 (1.27)

0.180 (4.57)

0.160 (4.06)

0.095 (2.41)

0.008 (0.20)

0.002 (0.05)

0.016 (0.41)

0.006 (0.15)

0.075 (1.90)

0.058 (1.47)

0.038 (0.97)

0.030 (0.76)

0.015 (0.38)

0.020

(0.51) MAX.

Seating Plane

0.255 (6.48)

0.235 (5.97)

Revision: 16-Jan-18

Document Number: 89421

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product

with the properties described in the product specification is suitable for use in a particular application. Parameters provided in

datasheets and / or specifications may vary in different applications and performance may vary over time. All operating

parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.

Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited

to the warranty expressed therein.

Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and

for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of

any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.

Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website

or for that of subsequent links.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Revision: 09-Jul-2021

Document Number: 91000

SMBG51A-M3/52 [VISHAY]

相关型号：

SMBG51A-M3/5B

SMBG51A-TP

SMBG51A/51

SMBG51A/52

SMBG51A/TR7

SMBG51AE3

SMBG51AE3/TR

SMBG51AE3TR

SMBG51AHE3

SMBG51AHE3/52

SMBG51AHE3/5B

SMBG51AP