SMPC10A [VISHAY]
Surface Mount TRANSZORB? Transient Voltage Suppressors; 表面贴装的TransZorb ？瞬态电压抑制器
| 型号： | SMPC10A |
| 厂家： | 
VISHAY |
| 描述： | Surface Mount TRANSZORB? Transient Voltage Suppressors |
| 文件： | 总5页 (文件大小：93K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
New Product
SMPC5.0A thru SMPC36A
Vishay General Semiconductor
®
Surface Mount TRANSZORB Transient Voltage Suppressors
FEATURES
eSMP® Series
• Very low profile - typical height of 1.1 mm
• Ideal for automated placement
A
• Uni-direction only
• Excellent clamping capability
1
• Low incremental surge resistance
• Very fast response time
2
• Meets MSL level 1, per J-STD-020
TO-277A (SMPC)
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
Cathode 1
Cathode 2
A
• Halogen-free according to IEC 61249-2-21 definition
Anode
MECHANICAL DATA
Case: TO-277A (SMPC)
PRIMARY CHARACTERISTICS
VWM
PPPM
PD
5.0 V to 36 V
1500 W
6.5 W
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3
- halogen-free, RoHS compliant, and
commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
IFSM
200 A
M3 suffix meets JESD 201 class 1A whisker test
TJ max.
150 °C
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial and telecommunication. Sensitive
equipment against transient overvoltages.
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
1500
UNIT
W
(1)(2)
Peak power dissipation with a 10/1000 μs waveform (fig. 3)
Peak pulse current with a 10/1000 μs waveform (fig. 1)
Peak forward surge current 8.3 ms single half sine-wave
Power dissipation on infinite heatsink, TA = 50 °C
Maximum instandaneous forward voltage at 100 A
Operating junction and storage temperature range
PPPM
(1)
IPPM
See next table
200
A
(2)
IFSM
A
PD
6.5
W
(3)
VF
3.5
V
TJ, TSTG
- 55 to + 150
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum
Pulse test: 300 µs pulse width, 1 % duty cyclet
(2)
(3)
Document Number: 89116
Revision: 19-Apr-11
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com
19
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
SMPC5.0A thru SMPC36A
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN
VOLTAGE
VBR AT IT
MAXIMUM
REVERSE
LEAKAGE
CURRENT
MAXIMUM PEAK
PULSE SURGE
CURRENT
MAXIMUM
CLAMPING
VOLTAGE AT
IPPM
TEST
CURRENT
IT
STAND-OFF
VOLTAGE
VWM
DEVICE
MARKING
CODE
(1)
DEVICE TYPE
(V)
(2)
IPPM
(A)
(mA)
(V)
IR AT VWM
VC (V)
MIN.
MAX.
(μA)
SMPC5.0A
SMPC6.0A
SMPC6.5A
SMPC7.0A
SMPC7.5A
SMPC8.0A
SMPC8.5A
SMPC9.0A
SMPC10A
SMPC11A
SMPC12A
SMPC13A
SMPC14A
SMPC15A
SMPC16A
SMPC17A
SMPC18A
SMPC20A
SMPC22A
SMPC24A
SMPC26A
SMPC28A
SMPC30A
SMPC33A
SMPC36A
GDE
GDG
GDK
GDM
GDP
GDR
GDT
GDV
GDX
GDZ
GEE
GEG
GEK
GEM
GEP
GER
GET
GEV
GEX
GEZ
GFE
GFG
GFK
GFM
GFP
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.0
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
7.07
7.37
7.98
8.60
9.21
9.83
10.4
11.1
12.3
13.5
14.7
15.9
17.2
18.5
19.7
20.9
22.1
24.5
26.9
29.5
31.0
34.4
36.8
40.6
44.2
10
10
5.0
6.0
1500
1000
500
200
100
50
150
145.6
133.9
125.0
116.3
110.3
104.2
97.4
88.2
82.4
75.4
69.8
64.7
61.5
57.7
54.3
51.4
46.3
42.3
38.6
35.6
33.0
31.0
28.1
25.8
10.0
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
10
6.5
10
7.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
7.5
8.0
8.5
20
9.0
5.0
2.0
2.0
2.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
Notes
(1) Pulse test: t 50 ms
(2) Surge current waveform per fig. 3 and derated per fig. 2
(3) All terms and symbols are consistent with ANSI/IEEE C62.35
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
UNIT
(1)
Typical thermal resistance, junction to ambient air
Typical thermal resistance, junction to leads
RJA
125
15
°C/W
(2)
RJL
Notes
(1) Mounted on minimum recommended pad layout
(2) Units mounted on infinite heatsink at TA = 50 °C
ORDERING INFORMATION (Example)
PREFERRED P/N
SMPC5.0A-M3/86A
SMPC5.0A-M3/87A
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
0.10
0.10
86A
87A
1500
6500
7" diameter plastic tape and reel
13" diameter plastic tape and reel
www.vishay.com
20
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Document Number: 89116
Revision: 19-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
SMPC5.0A thru SMPC36A
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
150
100
50
100
TJ = 25 °C
tr = 10 µs
Non-repetitive Pulse
Waveform shown in Fig. 3
TA = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
Peak Value
IPPM
10
Half Value - IPP
IPPM
2
10/1000 µs Waveform
as defined by R.E.A.
1
0.31 x 0.31" (8.0 x 8.0 mm)
Copper Pad Areas
td
0
0.1
0.1
0
1.0
2.0
3.0
4.0
1
10
100
1000
10 000
t - Time (ms)
td - Pulse Width (µs)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 3 - Pulse Waveform
10 000
1000
100
100
75
50
25
0
VR measured
at Zero Bias
VR measured at Stand-off
Voltage VWM
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
1
10
100
0
25
50
75 100 125 150 175 200
Reverse Voltage (V)
TJ - Initial Temperature
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
Fig. 4 - Typical Junction Capacitance
Document Number: 89116
Revision: 19-Apr-11
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com
21
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
SMPC5.0A thru SMPC36A
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-277A (SMPC)
0.187 (4.75)
0.175 (4.45)
0.016 (0.40)
0.006 (0.15)
A
0.262 (6.65)
0.250 (6.35)
0.242 (6.15)
0.238 (6.05)
K
2
K
1
0.047 (1.20)
0.039 (1.00)
0.171 (4.35)
0.167 (4.25)
0.146 (3.70)
0.134 (3.40)
Mounting Pad Layout
0.087 (2.20)
0.075 (1.90)
0.189 (4.80)
MIN.
0.189 (4.80)
0.173 (4.40)
0.186 (4.72)
MIN.
0.268
(6.80)
0.155 (3.94)
NOM.
0.030 (0.75) NOM.
0.049 (1.24)
0.037 (0.94)
0.050 (1.27)
MIN.
0.084 (2.13) NOM.
0.053 (1.35)
0.041 (1.05)
0.041
(1.04)
0.055 (1.40)
MIN.
Conform to JEDEC TO-277A
www.vishay.com
22
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Document Number: 89116
Revision: 19-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
相关型号：
SMPC11A-M3/86A
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, TO-277A, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-3, Transient Suppressor
VISHAY
SMPC11A-M3/87A
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, TO-277A, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-3, Transient Suppressor
VISHAY
SMPC12A-M3/86A
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, TO-277A, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-3, Transient Suppressor
VISHAY
SMPC12A-M3/87A
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, TO-277A, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-3, Transient Suppressor
VISHAY
SMPC13A-M3/86A
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, TO-277A, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-3, Transient Suppressor
VISHAY
©2020 ICPDF网 联系我们和版权申明