ST1280C04K1L [VISHAY]
Phase Control Thyristors (Hockey PUK Version), 2310 A; 相位控制晶闸管（曲棍球PUK版） ， 2310一
| 型号： | ST1280C04K1L |
| 厂家： | 
VISHAY |
| 描述： | Phase Control Thyristors (Hockey PUK Version), 2310 A |
| 文件： | 总7页 (文件大小：116K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ST1280C..K Series
Vishay High Power Products
Phase Control Thyristors
(Hockey PUK Version), 2310 A
FEATURES
• Center amplifying gate
• Metal case with ceramic insulator
RoHS
COMPLIANT
• International standard case A-24 (K-PUK)
• High profile hockey PUK
• Lead (Pb)-free
A-24 (K-PUK)
TYPICAL APPLICATIONS
• DC motor controls
PRODUCT SUMMARY
IT(AV)
2310 A
• Controlled DC power supplies
• AC controllers
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER
TEST CONDITIONS
VALUES
2310
UNITS
A
°C
A
IT(AV)
Ths
55
4150
IT(RMS)
ITSM
I2t
Ths
25
°C
50 Hz
60 Hz
50 Hz
60 Hz
42 500
44 500
9027
A
kA2s
8240
V
DRM/VRRM
400 to 600
200
V
tq
Typical
µs
°C
TJ
- 40 to 125
ELECTRICAL SPECIFICATIONS
VOLTAGE RATINGS
V
DRM/VRRM, MAXIMUM REPETITIVE PEAK
VRSM, MAXIMUM
NON-REPETITIVE PEAK VOLTAGE AT TJ = TJ MAXIMUM
IDRM/ RRM
I
MAXIMUM
VOLTAGE
CODE
TYPE NUMBER
AND OFF-STATE VOLTAGE
V
V
mA
04
06
400
600
500
700
ST1280C..K
100
Document Number: 93718
Revision: 11-Aug-08
For technical questions, contact: ind-modules@vishay.com
www.vishay.com
1
ST1280C..K Series
Phase Control Thyristors
(Hockey PUK Version),
2310 A
Vishay High Power Products
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES UNITS
2310 (885)
55 (85)
4150
A
Maximum average on-state current
at heatsink temperature
180° conduction, half sine wave
Double side (single side) cooled
IT(AV)
°C
Maximum RMS on-state current
IT(RMS)
25 °C heatsink temperature double side cooled
t = 10 ms
t = 8.3 ms
t = 10 ms
t = 8.3 ms
t = 10 ms
t = 8.3 ms
t = 10 ms
t = 8.3 ms
42 500
44 500
35 700
37 400
9027
No voltage
reapplied
A
Maximum peak, one-cycle
non-repetitive surge current
ITSM
100 % VRRM
reapplied
Sinusoidal half wave,
initial TJ = TJ maximum
No voltage
reapplied
8241
Maximum I2t for fusing
I2t
kA2s
6383
100 % VRRM
reapplied
5828
Maximum I2√t for fusing
I2√t
VT(TO)1
VT(TO)2
rt1
t = 0.1 to 10 ms, no voltage reapplied
90 270
0.83
kA2√s
Low level value of threshold voltage
High level value of threshold voltage
Low level value of on-state slope resistance
High level value of on-state slope resistance
Maximum on-state voltage
(16.7 % x π x IT(AV) < I < π x IT(AV)), TJ = TJ maximum
(I > π x IT(AV)), TJ = TJ maximum
V
0.90
(16.7 % x π x IT(AV) < I < π x IT(AV)), TJ = TJ maximum
(I > π x IT(AV)), TJ = TJ maximum
0.077
0.068
1.44
mΩ
V
rt2
VTM
IH
Ipk = 8000 A, TJ = TJ maximum, tp = 10 ms sine pulse
Maximum holding current
600
TJ = 25 °C, anode supply 12 V resistive load
mA
Typical latching current
IL
1000
SWITCHING
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
Maximum non-repetitive rate of
rise of turned-on current
Gate drive 20 V, 20 Ω, tr ≤ 1 µs
TJ = TJ maximum, anode voltage ≤ 80 % VDRM
dI/dt
1000
A/µs
Gate current 1 A, dIg/dt = 1 A/µs
Vd = 0.67 % VDRM, TJ = 25 °C
Typical delay time
Typical turn-off time
td
tq
1.9
µs
ITM = 550 A, TJ = TJ maximum, dI/dt = 40 A/µs,
200
V
R = 50 V, dV/dt = 20 V/µs, gate 0 V 100 Ω, tp = 500 µs
BLOCKING
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
Maximum critical rate of rise of
off-state voltage
dV/dt
TJ = TJ maximum linear to 80 % rated VDRM
TJ = TJ maximum, rated VDRM/VRRM applied
500
V/µs
Maximum peak reverse and
off-state leakage current
IRRM
,
100
mA
IDRM
www.vishay.com
2
For technical questions, contact: ind-modules@vishay.com
Document Number: 93718
Revision: 11-Aug-08
ST1280C..K Series
Phase Control Thyristors
(Hockey PUK Version),
2310 A
Vishay High Power Products
TRIGGERING
VALUES
PARAMETER
SYMBOL
TEST CONDITIONS
UNITS
TYP. MAX.
Maximum peak gate power
PGM
PG(AV)
IGM
TJ = TJ maximum, tp ≤ 5 ms
16
3
W
A
Maximum average gate power
TJ = TJ maximum, f = 50 Hz, d% = 50
Maximum peak positive gate current
Maximum peak positive gate voltage
Maximum peak negative gate voltage
3.0
20
5.0
+ VGM
- VGM
TJ = TJ maximum, tp ≤ 5 ms
V
TJ = - 40 °C
TJ = 25 °C
200
100
50
-
200
-
DC gate current required to trigger
DC gate voltage required to trigger
IGT
mA
V
Maximum required gate trigger/
TJ = 125 °C
TJ = - 40 °C
TJ = 25 °C
TJ = 125 °C
current/voltage are the lowest
value which will trigger all units
12 V anode to cathode applied
1.4
1.1
0.9
-
VGT
3.0
-
Maximum gate current/voltage
not to trigger is the maximum
TJ = TJ maximum value which will not trigger any
unit with rated VDRM anode to
cathode applied
DC gate current not to trigger
DC gate voltage not to trigger
IGD
10
mA
V
VGD
0.25
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
- 40 to 125
- 40 to 150
0.042
UNITS
Maximum operating temperature range
Maximum storage temperature range
TJ
°C
TStg
DC operation single side cooled
DC operation double side cooled
DC operation single side cooled
DC operation double side cooled
Maximum thermal resistance, junction to heatsink
RthJ-hs
0.021
K/W
0.006
Maximum thermal resistance, case to heatsink
Mounting force, 10 %
RthC-hs
0.003
24 500
(2500)
N
(kg)
Approximate weight
Case style
425
g
See dimensions - link at the end of datasheet
A-24 (K-PUK)
ΔRthJC CONDUCTION
SINUSOIDAL CONDUCTION
RECTANGULAR CONDUCTION
CONDUCTION ANGLE
TEST CONDITIONS
UNITS
SINGLE SIDE DOUBLE SIDE SINGLE SIDE DOUBLE SIDE
180°
120°
90°
0.003
0.004
0.005
0.007
0.012
0.003
0.004
0.005
0.007
0.012
0.002
0.004
0.005
0.007
0.012
0.002
0.004
0.005
0.007
0.012
TJ = TJ maximum
K/W
60°
30°
Note
• The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC
Document Number: 93718
Revision: 11-Aug-08
For technical questions, contact: ind-modules@vishay.com
www.vishay.com
3
ST1280C..K Series
Phase Control Thyristors
(Hockey PUK Version),
2310 A
Vishay High Power Products
130
130
ST1280C..K Series
(Double Side Cooled)
ST1280C..K Series
(Single Side Cooled)
120
110
100
90
120
110
100
90
R
(DC) = 0.021 K/W
thJ-hs
R
(DC) = 0.042 K/W
thJ-hs
Conduction Period
Conduction Angle
80
70
60
50
40
80
70
30˚
30˚
60˚
60˚
60
90˚
120˚
90˚
120˚
50
30
180˚
180˚
DC
20
40
0
1000 2000 3000 4000 5000
Average On-state Current (A)
0
400
800
1200
1600
AverageOn-statecurrent(A)
Fig. 1 - Current Ratings Characteristics
Fig. 4 - Current Ratings Characteristics
3600
130
120
110
100
90
80
70
60
50
ST1280C..K Series
(Single Side Cooled)
3200
2800
2400
2000
1600
1200
800
180˚
120˚
90˚
R
(DC) = 0.042 K/W
thJ-hs
RMS Limit
60˚
30˚
Conduction Period
Conduction Angle
30˚
60˚
ST1280C..K Series
90˚
40
30
20
400
120˚
T
= 125˚C
J
180˚
DC
0
0
500 1000 1500 2000 2500 3000
Average On-state Current (A)
0
500 1000 1500 2000 2500
AverageOn-statecurrent(A)
Fig. 2 - Current Ratings Characteristics
Fig. 5 - On-State Power Loss Characteristics
5000
130
120
110
100
90
ST1280C..K Series
(Double Side Cooled)
4500
4000
3500
3000
2500
2000
1500
1000
500
DC
180˚
120˚
90˚
R
(DC) = 0.021 K/W
thJ-hs
RMS Limit
60˚
30˚
Conduction Angle
80
70
Conduction Period
60
30˚
ST1280C..K Series
50
60˚
T
= 125˚C
90˚
J
120˚
40
180˚
0
30
0
1000 2000 3000 4000 5000
Average On-state Current (A)
0
500 1000 1500 2000 2500 3000
AverageOn-stateCurrent(A)
Fig. 3 - Current Ratings Characteristics
Fig. 6 - On-State Power Loss Characteristics
www.vishay.com
4
For technical questions, contact: ind-modules@vishay.com
Document Number: 93718
Revision: 11-Aug-08
ST1280C..K Series
Phase Control Thyristors
(Hockey PUK Version),
2310 A
Vishay High Power Products
40000
35000
30000
25000
20000
15000
45000
At Any Rated Load Condition And With
Maximum Non Repetitive Surge Current
Versus Pulse Train Duration. Control
Of Conduction May Not Be Maintained.
Rated V
Applied Following Surge.
RRM
Initial T = 125˚C
J
40000
Initial T = 125 ˚C
J
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
No Voltage Reapplied
Rated V
Reapplied
35000
30000
25000
20000
15000
RRM
ST1280C..K Series
ST1280C..K Series
1
10
100
0.01
0.1
Pulse Train Duration (s)
1
Number Of Equal Amplitude Half Cycle Current Pulses (N)
Fig. 7 - Maximum Non-Repetitive Surge Current
Single and Double Side Cooled
Fig. 8 - Maximum Non-Repetitive Surge Current
Single and Double Side Cooled
100000
10000
1000
T = 25˚C
J
T = 125˚C
J
ST1280C..K Series
100
0.5
1
1.5
Instantaneous On-state Voltage (V)
Fig. 9 - On-State Voltage Drop Characteristics
2
2.5
3
3.5
4
4.5
0.1
0.01
Steady State Value
= 0.042 K/W
R
thJ-hs
(Single Side Cooled)
= 0.021 K/W
R
thJ-hs
(Double Side Cooled)
(DC Operation)
ST1280C..K Series
0.001
0.001
0.01
0.1
1
10
100
Square Wave Pulse Duration (s)
Fig. 10 - Thermal Impedance ZthJ-hs Characteristics
Document Number: 93718
Revision: 11-Aug-08
For technical questions, contact: ind-modules@vishay.com
www.vishay.com
5
ST1280C..K Series
Phase Control Thyristors
(Hockey PUK Version),
2310 A
Vishay High Power Products
100
Rectangular gate pulse
a) Recommended load line for
rated di/dt 20V, 10ohms; tr<=1 µs
(1) PGM = 16W, tp = 4ms
(2) PGM = 30W, tp = 2ms
(3) PGM = 60W, tp = 1ms
:
b) Recommended load line for
<=30% rated di/dt
tr<=1 µs
: 10V, 10ohms
10
1
(2) (3)
VG D
IG D
Frequency Limited by PG(AV)
10 100
Device: ST1280C..K Series
0.1
0.1
0.001
0.01
1
Instantaneous Gate Current (A)
Fig. 11 - Gate Characteristics
ORDERING INFORMATION TABLE
Device code
ST 128
0
C
06
K
1
-
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
-
-
-
Thyristor
Essential part number
0 = Converter grade
-
-
-
-
C = Ceramic PUK
Voltage code x 100 = VRRM (see Voltage Ratings table)
K = PUK case A-24 (K-PUK)
0 = Eyelet terminals (gate and auxiliary cathode unsoldered leads)
1 = Fast-on terminals (gate and auxiliary cathode unsoldered leads)
2 = Eyelet terminals (gate and auxiliary cathode soldered leads)
3 = Fast-on terminals (gate and auxiliary cathode soldered leads)
8
-
Critical dV/dt: None = 500 V/µs (standard selection)
L = 1000 V/µs (special selection)
LINKS TO RELATED DOCUMENTS
Dimensions
http://www.vishay.com/doc?95081
www.vishay.com
6
For technical questions, contact: ind-modules@vishay.com
Document Number: 93718
Revision: 11-Aug-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号：
ST1280C04K1LPBF
Silicon Controlled Rectifier, 4150A I(T)RMS, 2300000mA I(T), 400V V(DRM), 400V V(RRM), 1 Element, KPUK-2
INFINEON
ST1280C04K2LPBF
Silicon Controlled Rectifier, 4150A I(T)RMS, 2300000mA I(T), 400V V(DRM), 400V V(RRM), 1 Element, KPUK-2
INFINEON
ST1280C04K2PBF
Silicon Controlled Rectifier, 4150A I(T)RMS, 2300000mA I(T), 400V V(DRM), 400V V(RRM), 1 Element, KPUK-2
INFINEON
©2020 ICPDF网 联系我们和版权申明