STC6.810C2AM [VISHAY]
CAPACITOR, TANTALUM, SOLID, POLARIZED, 10 V, 6.8 uF, THROUGH HOLE MOUNT, AXIAL LEADED;型号: | STC6.810C2AM |
厂家: | VISHAY |
描述: | CAPACITOR, TANTALUM, SOLID, POLARIZED, 10 V, 6.8 uF, THROUGH HOLE MOUNT, AXIAL LEADED |
文件: | 总7页 (文件大小:349K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
STC
Vishay Sprague
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-Polar
FEATURES
• Subminiature package size and light weight
• Rectangular case with axial or radial leads
• 2 to 35 VDC
• 0.1 µF to 470 µF
• Operating temperature range: - 55 °C to + 125 °C
• High stability and reliability
• Tested in accordance with MIL-PRF-49137
• Unique and comprehensive custom design capability
ELECTRICAL CHARACTERISTICS
Operating temperature range: - 55 °C to + 125 °C
APPLICATIONS
Capacitance: Measured at 120 Hz and 25 °C with a
maximum of 2.2 VDC bias and 1.0 Vrms signal.
• Hearing aids
Capacitance Tolerance: Standard tolerance is 20 % for
ratings 0.1 µF and above, and + 40, - 20 % for ratings below
0.1 µF. Special tolerances are also available.
• Portable communications
• Space/avionics
Dissipation Factor: When measured simultaneously with
capacitance, DF shall not exceed the value shown in the
ratings tables.
• Laptop computers
MECHANICAL SPECIFICATIONS
DC Leakage Current (DCL Max.):
Solder coated nickel leads (type N32 per MIL-STD-1276) are
standard on all case sizes
When measured with DC voltage applied through a 1000 Ω
resistor for 5 min, DC leakage (µA) shall not exceed:
At 25 °C: Leakage current shall not exceed the values listed
in the Standard Ratings Tables
Leads are weldable and/or solderable
Special leads are available on request (e.g. bare nickel, gold
plated nickel or ribbon leads)
At 85 °C: Leakage current shall not exceed 10 times the
values listed in the Standard Ratings Tables
At 125 °C and 66 % of Rated Voltage: Leakage current
shall not exceed 15 times the values listed in the Standard
Ratings Tables
Lead length is 1 1/2" [38.1 mm] minimum on nonpolar parts
On polar parts the negative lead is 1 1/4" [31.8 mm] minimum
and the positive lead is 1 1/2" [38.1 mm] minimum
Operating Voltage: Full working voltage up to 85 °C. From
85 °C to 125 °C working voltage derates linearly to 66 % of
the 85 °C working voltage
ORDERING INFORMATION
STC
1.0
35
C2
A (1)
M
MODEL
CAPACITANCE
IN µF
DC VOLTAGE RATING
AT + 85 °C
CASE CODE
LEAD
CONFIGURATION
CAPACITANCE
TOLERANCE
C = Polar
N = Non-polar
A = Axial
R = Radial
E = + 40, - 20 %
M = 20 %
K = 10 %
J = 5 %
Example of Part Number Code: STC1.0-35C2AM
Note:
(1) To complete part number in rating tables, add A or R.
Change suffix if special capacitance tolerance is required.
Document Number: 43006
Revision: 10-Dec-07
For technical questions, contact: tantalum@vishay.com
www.vishay.com
91
STC
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-Polar
Vishay Sprague
DIMENSIONS in inches [millimeters]
AXIAL
RADIAL
POLAR STYLE
T
T
RED EPOXY
POLARITY DOT
W
W
d
(+)
3RD DOT
2ND DOT
1ST DOT
3RD DOT
2ND DOT
1ST DOT
L
L
TOLERANCE
DOT
TOLERANCE
DOT
(+)
d
(-)
d
E
THE 3RD DOT IS ON THE END OF THE CX SIZE
L
W
MAX.
T
E TOL.
CASE CODE
E
d
MAX.
MAX.
CX
C0
C1
C2
C3
C4
C5
C6
0.075 [1.91]
0.100 [2.54]
0.125 [3.18]
0.165 [4.19]
0.225 [5.72]
0.290 [7.37]
0.310 [7.87]
0.475 [12.07]
0.050 [1.27]
0.050 [1.27]
0.070 [1.78]
0.120 [3.05]
0.185 [4.70]
0.220 [5.59]
0.230 [5.84]
0.375 [9.53]
0.040 [1.02]
0.040 [1.02]
0.040 [1.02]
0.070 [1.78]
0.075 [1.91]
0.110 [2.79]
0.130 [3.30]
0.150 [3.81]
0.030 [0.76]
0.030 [0.76]
0.050 [1.27]
0.100 [2.54]
0.150 [3.81]
0.180 [4.57]
0.200 [[5.08]
0.300 [7.62]
0.015 [0.38]
0.015 [0.38]
0.015 [0.38]
0.020 [0.51]
0.020 [0.51]
0.025 [0.64]
0.025 [0.64]
0.025 [0.64]
0.007 [0.18]
0.007 [0.18]
0.010 [0.25]
0.010 [0.25]
0.010 [0.25]
0.016 [0.41]
0.016 [0.41]
0.016 [0.41]
NON POLAR STYLE
AXIAL
RADIAL
T
T
W
W
d
TOLERANCE
TOLERANCE
DOT
DOT
2ND DOT
1ST DOT
3RD DOT
2ND DOT
1ST DOT
3RD DOT
LA
LR
d
E
LA
MAX.
LR
MAX.
W
MAX.
T
E
MAX.
E TOL.
CASE CODE
d
MAX.
N1
N2
N3
N4
0.220 [5.59]
0.280 [7.11]
0.370 [9.40]
0.390 [9.91]
0.180 [4.57]
0.240 [6.10]
0.315 [8.00]
0.335 [8.51]
0.125 [3.18]
0.140 [3.56]
0.180 [4.57]
0.230 [5.84]
0.125 [3.18]
0.180 [4.57]
0.220 [5.59]
0.230 [5.84]
0.100 [2.54]
0.100 [2.54]
0.150 [3.81]
0.180 [4.57]
0.020 [0.51]
0.025 [0.64]
0.025 [0.64]
0.025 [0.64]
0.010 [0.25]
0.010 [0.25]
0.016 [0.41]
0.016 [0.41]
www.vishay.com
92
For technical questions, contact: tantalum@vishay.com
Document Number: 43006
Revision: 10-Dec-07
STC
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-Polar
Vishay Sprague
STANDARD RATINGS - POLAR CAPACITORS
CAPACITANCE
(µF)
MAX
DF (%)
MAX. DCL
AT + 25 °C (µA)
CASE
CODE
PART
NUMBER
2 WVDC AT + 85 °C
STC.0022-2CX (1)
E
0.0022
0.0033
0.0047
0.0068
0.10
0.15
0.22
0.33
0.47
0.68
1.0
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
2.0
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
C0
C1
C3
STC.0033-2CX (1)E
STC.0047-2CX (1)E
STC.0068-2CX (1)
E
STC.10-2CX (1)M
STC.15-2CX (1)M
STC.22-2CX (1)M
STC.33-2CX (1)M
STC.47-2CX (1)M
STC.68-2CX (1)M
STC1.0-2CX (1)M
STC1.5-2CX (1)M
STC2.2-2CX (1)M
STC2.2-2C0 (1)M
STC6.8-2C1 (1)M
STC100-2C3 (1)M
1.5
2.2
2.2
6.8
100
3 WVDC AT + 85 °C
STC1.5-3C0 (1)M
STC22-3C2 (1)M
STC68-3C3 (1)M
STC100-3C4 (1)M
1.5
22
68
10
10
10
10
0.5
1.0
2.0
3.0
C0
C2
C3
C4
100
4 WVDC AT + 85 °C
STC1.0-4C0 (1)M
STC4.7-4C1 (1)M
STC10-4C2 (1)M
STC15-4C2 (1)M
STC47-4C3 (1)M
STC68-4C4 (1)M
STC220-4C5 (1)M
STC470-4C6 (1)M
1.0
4.7
10
10
10
8
0.5
0.5
1.0
1.0
2.0
3.0
9.0
10.0
C0
C1
C2
C2
C3
C4
C5
C6
15
8
47
8
68
8
220
470
15
15
6 WVDC AT + 85 °C
STC.68-6C0 (1)M
STC3.3-6C1 (1)M
STC33-6C3 (1)M
STC47-6C4 (1)M
0.68
3.3
33
10
8
6
0.5
0.5
2.0
3.0
9.0
10.0
C0
C1
C3
C4
C5
C6
47
6
STC150-6C5 (1)
STC330-6C6 (1)
M
M
150
330
10
15
10 WVDC AT + 85 °C
STC.47-10C0 (1)M
STC1.5-10C1 (1)
0.47
1.5
2.2
6.8
22
10
6
6
6
6
0.5
0.5
0.5
1.0
2.0
3.0
9.0
0.5
C0
C1
C1
C2
C3
C4
C5
C6
M
STC2.2-10C1 (1)M
STC6.8-10C2 (1)M
STC22-10C3 (1)M
STC33-10C4 (1)M
STC100-10C5 (1)M
STC220-10C6 (1)M
33
6
100
220
8
6
15 WVDC AT + 85 °C
STC1.0-15C1 (1)M
STC4.7-15C2 (1)M
STC15-15C3 (1)M
STC22-15C4 (1)M
STC68-15C5 (1)M
STC150-15C6 (1)M
1.0
4.7
15
6
6
6
0.5
1.0
2.0
3.0
6.0
10.0
C1
C2
C3
C4
C5
C6
22
6
68
6
150
10
Note:
(1) Add A for axial, R for radial
Document Number: 43006
Revision: 10-Dec-07
For technical questions, contact: tantalum@vishay.com
www.vishay.com
93
STC
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-Polar
Vishay Sprague
STANDARD RATINGS - POLAR CAPACITORS
CAPACITANCE
(µF)
MAX
DF (%)
MAX. DCL
AT+ 25 °C (µA)
CASE
CODE
PART
NUMBER
20 WVDC AT + 85 °C
STC.68-20C1 (1)
STC3.3-20C2 (1)
STC6.8-20C3 (1)
M
M
M
0.68
3.3
6.8
10
15
47
6
6
6
6
6
0.5
1.0
2.0
2.0
3.0
6.0
10.0
C1
C2
C3
C3
C4
C5
C6
STC10-20C3 (1)
STC15-20C4 (1)
STC47-20C5 (1)
M
M
M
6
10
STC100-20C6 (1)
M
100
25 WVDC AT + 85 °C
STC.47-25C1 (1)
STC2.2-25C2 (1)
STC3.3-25C3 (1)
STC4.7-25C3 (1)
M
M
M
M
0.47
2.2
3.3
4.7
10
15
22
33
68
6
6
6
6
6
6
6
6
6
0.5
1.0
2.0
2.0
3.0
6.0
6.0
6.0
C1
C2
C3
C3
C4
C5
C5
C5
C6
STC10-25C4 (1)
STC15-25C5 (1)
STC22-25C6 (1)
STC33-25C5 (1)
STC68-25C6 (1)
M
M
M
M
M
10.0
35 WVDC AT + 85 °C
STC.33-35C1 (1)
STC.68-35C2 (1)
STC1.0-35C2 (1)
STC1.5-35C2 (1)
M
M
M
M
0.33
0.68
1.0
6
6
6
6
0.5
1.0
1.0
1.0
C1
C2
C2
C2
1.5
Note:
(1) Add A for axial, R for radial
STANDARD RATINGS - NON-POLAR CAPACITORS
CAPACITANCE
MAX
DF (%)
MAX. DCL
AT + 25 °C (µA)
CASE
CODE
PART
NUMBER
(µF)
2 WVDC AT + 85 °C
STC10-2N1 (1)
M
10
10
1.0
N1
3 WVDC AT + 85 °C
STC33-3N2 (1)
STC47-3N3 (1)
M
33
47
100
10
8
10
2.0
3.0
6.0
N2
N3
N4
M
STC100-3N4 (1)
M
4 WVDC AT + 85 °C
STC6.8-4N1 (1)
M
6.8
22
33
68
8
8
8
8
1.0
2.0
3.0
6.0
N1
N2
N3
N4
STC22-4N2 (1)
STC33-4N3 (1)
STC68-4N4 (1)
M
M
M
6 WVDC AT + 85 °C
STC4.7-6N1 (1)
M
4.7
15
22
47
6
6
6
6
1.0
2.0
3.0
6.0
N1
N2
N3
N4
STC15-6N2 (1)
STC22-6N3 (1)
STC47-6N4 (1)
M
M
M
10 WVDC AT + 85 °C
STC3.3-10N1 (1)
M
3.3
10
15
33
6
6
6
6
1.0
2.0
3.0
6.0
N1
N2
N3
N4
STC10-10N2 (1)
STC15-10N3 (1)
STC33-10N4 (1)
M
M
M
Note:
(1) Add A for axial, R for radial
www.vishay.com
94
For technical questions, contact: tantalum@vishay.com
Document Number: 43006
Revision: 10-Dec-07
STC
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-Polar
Vishay Sprague
STANDARD RATINGS - NON-POLAR CAPACITORS
CAPACITANCE
(µF)
MAX.
DF (%)
MAX. DCL
AT + 25 °C (µA)
CASE
CODE
PART
NUMBER
15 WVDC AT + 85 °C
2.2
6.8
10
6
6
6
6
1.0
N1
N2
N3
N4
STC2.2-15N1 (1)M
STC6.8-15N2 (1)M
STC10-15N3 (1)M
STC22-15N4 (1)M
2.0
3.0
22
6.0
20 WVDC AT + 85 °C
1.5
4.7
6.8
15
6
6
6
6
1.0
N1
N2
N3
N4
STC1.5-20N1 (1)M
STC4.7-20N2 (1)
M
STC6.8-20N3 (1)M
STC15-20N4 (1)M
2.0
3.0
6.0
25 WVDC AT + 85 °C
1.0
2.2
3.3
4.7
10
6
6
6
6
6
1.0
N1
N2
N2
N3
N4
STC1.0-25N1 (1)M
STC2.2-25N2 (1)M
STC3.3-25N2 (1)M
STC4.7-25N3 (1)M
STC10-25N4 (1)M
2.0
2.0
3.0
6.0
35 WVDC AT + 85 °C
1.0
0.68
6
N1
STC.68-35N1 (1)M
Note:
(1) Add A for axial, R for radial
MARKING
All other case sizes are have color dot marking:
STC Capacitors case sizes C3 - C6 and N2 - N4 are
print marked:
- Capacitance is in picofarads
- 1st and 2nd digits are significant figures
- 3rd digit indicates the number of zeros.
Capacitance
Color
Black
Brown
Red
Digit
In picofarads, indicated by 3 dots.
1st and 2nd dot give the significant
digits.
3rd dot indicates the number of
zeros.
Color dot location is shown on the
dimensional sketches.
Black dot is omitted on black sleeve.
0
1
2
3
4
5
6
7
8
9
Orange
Yellow
Green
Blue
Capacitance Tolerance Color
Tolerance
5 %
Is indicated by a dot on
Gold
Violet
Grey
the side of the case.
Black dot is omitted.
Silver
10 %
None
None
20 %
White
+ 40 %/- 20 %
e.g. Yellow-Violet-Green = 4 700 000 pf
= 4.7 µF
The positive lead is indicated by a color dot of red
epoxy on the unit.
Document Number: 43006
Revision: 10-Dec-07
For technical questions, contact: tantalum@vishay.com
www.vishay.com
95
STC
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-Polar
Vishay Sprague
PERFORMANCE AND RELIABILITY
The capacitors are tested in accordance with MIL-PRF-
49137, with specific requirements as follows:
IMPEDANCE VS. FREQUENCY
Temperature Stability: When tested per MIL-PRF-49137/
6, capacitance shall be within 15 % at - 55 °C and 85 °C,
and 10 % at 25 °C after exposure to temperature extremes.
DF shall be within 200 % of initial limit at - 55 °C, 150 % of
initial limit at 85 °C, and meet the initial at 25 °C. DCL shall
be within 10 x initial limit at 85 °C, and meet the initial
limit at 25 °C.
10K
5K
(MFD-WVDC)
2K
1K
Moisture Resistance: (per Method 106 of MIL-STD-202)
After 10 cycles of 24 h at 25 °C to 65 °C and 80 - 98 % RH;
capacitance shall be within 15 % of initial value, DF within
1.5 x initial limit and leakage within 3 x initial limit.
500
200
100
50
20
Life: (per Method 108 of MIL-STD-202) after 1000 h at 85 °C
and rated voltage; capacitance shall be within 10 % of
initial limit, DF within initial limits, and leakage within
200 % of initial limit.
10
5.0
2.0
1.0
Surge Voltage: (per MIL-PRF-49317) After 1000 cycles at
85 °C and 1.3 x WVDC; capacitance shall be within 10 %
of initial limit, DF and leakage within initial limits.
Resistance to Soldering Heat: (per Method 210 of
MIL-STD-202, Condition B) After immersion in 260 °C molten
solder to within a 1/4” of the body of the unit, there shall be
no evidence of mechanical or electrical degradation.
0.5
0.2
0.1
100
500
1
2
5
10 20 50 100
500
1
2
5
10
Solderability: (per Method 208 of MIL-STD-202) After
dipping leads in 235 °C molten solder to within 0.125" of the
body of the unit, the solder shall cover 95 % of the lead
surface.
Hz
kHz
FREQUENCY
kHz
MHz
Terminal Strength: (per Method 211 of MIL-STD-202) After
the following test there shall be no loosening of the terminals
or permanent damage to the terminals. Test Condition A:
LEAKAGE CURRENT - TEMPERATURE
(Pull Test) 0.010" leads withstand
1 pound, 0.016"
leads 2 pounds and 0.007" leads 1/2 pound. Test Condition
C: (Bend Test) All leads shall withstand 3 - 90° bends with a
1/2 pound applied force.
1.0
(MFD-WVDC)
CAPACITANCE VS. TEMPERATURE
+ 10
(MFD-WVDC)
1 µF-20 V
+ 5
100 µF-10 V
0.1
0
- 5
0.01
- 10
- 40
- 10
0
+ 20
+ 85
- 40
- 10
+ 25
+ 100
+ 85
TEMPERATURE °C
TEMPERATURE °C
www.vishay.com
96
For technical questions, contact: tantalum@vishay.com
Document Number: 43006
Revision: 10-Dec-07
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号:
STC6.810C2RJ
CAPACITOR, TANTALUM, SOLID, POLARIZED, 10 V, 6.8 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
STC6.810C2RK
CAPACITOR, TANTALUM, SOLID, POLARIZED, 10 V, 6.8 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
STC6.810C2RM
CAPACITOR, TANTALUM, SOLID, POLARIZED, 10 V, 6.8 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
STC6.815N2AJ
CAPACITOR, TANTALUM, SOLID, NON-POLARIZED, 15 V, 6.8 uF, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
STC6.815N2RK
CAPACITOR, TANTALUM, SOLID, NON-POLARIZED, 15 V, 6.8 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
STC6.820C3RM
CAPACITOR, TANTALUM, SOLID, POLARIZED, 20 V, 6.8 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
STC6.82C1AJ
CAPACITOR, TANTALUM, SOLID, POLARIZED, 2 V, 6.8 uF, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
STC6.82C1AM
CAPACITOR, TANTALUM, SOLID, POLARIZED, 2 V, 6.8 uF, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
STC6.84N1AJ
CAPACITOR, TANTALUM, SOLID, NON-POLARIZED, 4 V, 6.8 uF, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
STC6.84N1AK
CAPACITOR, TANTALUM, SOLID, NON-POLARIZED, 4 V, 6.8 uF, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
STC6.84N1AM
CAPACITOR, TANTALUM, SOLID, NON-POLARIZED, 4 V, 6.8 uF, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
©2020 ICPDF网 联系我们和版权申明