TPSMC6.8-HE3/9AT [VISHAY]
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AB, ROHS COMPLIANT, PLASTIC, SMC, 2 PIN, Transient Suppressor;型号: | TPSMC6.8-HE3/9AT |
厂家: | VISHAY |
描述: | DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AB, ROHS COMPLIANT, PLASTIC, SMC, 2 PIN, Transient Suppressor 电视 |
文件: | 总5页 (文件大小:85K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TPSMC6.8 thru TPSMC47A
Vishay General Semiconductor
®
Surface Mount PAR Transient Voltage Suppressors
High Temperature Stability and High Reliability Conditions
FEATURES
• Junction passivation optimized design
passivated anisotropic rectifier technology
• T = 185 °C capability suitable for high
J
reliability and automotive requirement
• Available in uni-directional polarity only
• 1500 W peak pulse power capability with a
10/1000 µs waveform
DO-214AB (SMC)
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 260 °C
PRIMARY CHARACTERISTICS
• AEC-Q101 qualified
VBR
PPPM
IFSM
6.8 V to 47 V
1500 W
200 A
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
TJ max.
185 °C
MECHANICAL DATA
Case: DO-214AB (SMC)
Molding compound meets UL 94 V-0 flammability
rating
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor units
for consumer, computer, industrial, automotive and
telecommunication.
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
HE3 suffix meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (T = 25 °C unless otherwise noted)
A
PARAMETER
SYMBOL
PPPM
IPPM
VALUE
1500
UNIT
W
Peak pulse power dissipation with a 10/1000 µs waveform (1)(2) (fig. 3)
Peak power pulse current with a 10/1000 µs waveform (1) (fig. 1)
Peak forward surge current 8.3 ms single half sine-wave (2)(3)
Maximum instantaneous forward voltage at 100 A (2)(3)
Operating junction and storage temperature range
See next table
200
A
IFSM
A
VF
3.5
V
TJ, TSTG
- 65 to + 185
°C
Notes
(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
(2) Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads at each terminal
(3) Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum
Document Number: 88407
Revision: 09-Feb-11
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com
1
TPSMC6.8 thru TPSMC47A
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted)
A
TJ = 150 °C
BREAKDOWN
VOLTAGE
MAXIMUM
PEAK
PULSE SURGE
MAXIMUM
REVERSE
LEAKAGE
MAXIMUM
CLAMPING
VOLTAGE
TEST
CURRENT
STAND-OFF
VOLTAGE
MAXIMUM
REVERSE
LEAKAGE
AT VWM
DEVICE
MARKING
CODE
DEVICE
TYPE
(1)
V
AT I
T
BR
I
V
T
WM
CURRENT
AT V
AT I
WM
PPM
(V)
(mA)
(V)
(2)
I
(µA)
V (V)
C
I
(A)
R
PPM
ID (µA)
MIN.
6.12
6.45
6.75
7.13
7.38
7.79
8.19
8.65
9.00
9.50
9.90
10.5
10.8
11.4
11.7
12.4
13.5
14.3
14.4
15.2
16.2
17.1
18.0
19.0
19.8
20.9
21.6
22.8
24.3
25.7
27.0
28.5
29.7
31.4
32.4
34.2
35.1
37.1
38.7
40.9
42.3
44.7
MAX.
7.48
7.14
8.25
7.88
9.02
8.61
10.0
9.55
11.0
10.5
12.1
11.6
13.2
12.6
14.3
13.7
16.5
15.8
17.6
16.8
19.8
18.9
22.0
21.0
24.2
23.1
26.4
25.2
29.7
28.4
33.0
31.5
36.3
34.7
39.6
37.8
42.9
41.0
47.3
45.2
51.7
49.4
TPSMC6.8
TPSMC6.8A
TPSMC7.5
TPSMC7.5A
TPSMC8.2
TPSMC8.2A
TPSMC9.1
TPSMC9.1A
TPSMC10
TPSMC10A
TPSMC11
TPSMC11A
TPSMC12
TPSMC12A
TPSMC13
TPSMC13A
TPSMC15
TPSMC15A
TPSMC16
TPSMC16A
TPSMC18
TPSMC18A
TPSMC20
TPSMC20A
TPSMC22
TPSMC22A
TPSMC24
TPSMC24A
TPSMC27
TPSMC27A
TPSMC30
TPSMC30A
TPSMC33
TPSMC33A
TPSMC36
TPSMC36A
TPSMC39
TPSMC39A
TPSMC43
TPSMC43A
TPSMC47
TPSMC47A
DDP
DEP
DFP
DGP
DHP
DKP
DLP
DMP
DNP
DPP
DQP
DRP
DSP
DTP
DUP
DVP
DWP
DXP
DYP
DZP
EDP
EEP
EFP
EGP
EHP
EKP
ELP
EMP
ENP
EPP
EQP
ERP
ESP
ETP
EUP
EVP
EWP
EXP
EYP
EZP
FDP
FEP
10.0
10.0
10.0
10.0
10.0
10.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
5.50
5.80
6.05
6.40
6.63
7.02
7.37
7.78
8.10
8.55
8.92
9.40
9.72
10.2
10.5
11.1
12.1
12.8
12.9
13.6
14.5
15.3
16.2
17.1
17.8
18.8
19.4
20.5
21.8
23.1
24.3
25.6
26.8
28.2
29.1
30.8
31.6
33.3
34.8
36.8
38.1
40.2
1000
1000
500
500
200
200
50
10000
10000
5000
5000
2000
2000
500
500
200
200
50
139.0
10.8
10.5
11.7
11.3
12.5
12.1
13.8
13.4
15.0
14.5
16.2
15.6
17.3
16.7
19.0
18.2
22.0
21.2
23.5
22.5
26.5
25.2
29.1
27.7
31.9
30.6
34.7
33.2
39.1
37.5
43.5
41.4
47.7
45.7
52.0
49.9
56.4
53.9
61.9
59.3
67.8
64.8
143.0
128.0
133.0
120.0
124.0
109.0
112.0
100.0
103.0
92.6
96.2
86.7
89.8
78.9
82.4
68.2
70.8
63.8
66.7
56.6
59.5
51.5
54.2
47.0
49.0
43.2
45.2
38.4
40.0
34.5
36.2
31.4
32.8
28.8
30.1
26.6
27.8
24.2
25.3
22.1
23.1
50
20
20
5.0
5.0
2.0
2.0
2.0
2.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
50
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
15
15
15
15
20
20
20
20
Notes
(1)
V
measured after IT applied for 300 µs, IT = square wave pulse or equivalent
BR
(2) Surge current waveform per fig. 3 and derated per fig. 2
(3) All terms and symbols are consistent with ANSI/IEEE C62.35
www.vishay.com
2
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Document Number: 88407
Revision: 09-Feb-11
TPSMC6.8 thru TPSMC47A
Vishay General Semiconductor
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE BASE QUANTITY
DELIVERY MODE
TPSMC6.8AHE3/57T (1)
TPSMC6.8AHE3/9AT (1)
0.211
57T
9AT
850
7" diameter plastic tape and reel
13" diameter plastic tape and reel
0.211
3500
Note
(1) AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(T = 25 C unless otherwise noted)
A
100
150
TJ = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
TA = 25 °C
Non-Repetitive Pulse
Waveform shown in Fig. 3
tr = 10 µs
Peak Value
IPPM
10
100
50
0
Half Value -
IPP
2
IPPM
1.0
10/1000 µs Waveform
as defined by R.E.A.
0.31 x 0.31" (8.0 x 8.0 mm)
Copper Pad Areas
td
0.1
0.1 µs
1.0 µs
10 µs
100 µs
1.0 ms
10 ms
1.0
3.0
4.0
0
2.0
t - Time (ms)
td - Pulse Width (s)
Figure 1. Peak Pulse Power Rating Curve
Figure 3. Pulse Waveform
100
75
10 000
1000
100
VR, measured at
Zero Bias
VR measured at
Stand-Off Voltage, VWM
50
25
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
0
1
10
VBR - Breakdown Voltage (V)
100
50
TJ - Initial Temperature (°C)
0
100
150
200
Figure 2. Pulse Power or Current vs. Initial Junction Temperature
Figure 4. Typical Junction Capacitance
Document Number: 88407
Revision: 09-Feb-11
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com
3
TPSMC6.8 thru TPSMC47A
Vishay General Semiconductor
200
TJ = TJ max.
8.3 ms Single Half Sine-Wave
100
50
10
1
5
10
50
100
Number of Cycles at 60 Hz
Figure 5. Maximum Non-Repetitive/Peak Forward Surge Current
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-214AB (SMC)
Cathode Band
Mounting Pad Layout
0.185 (4.69) MAX.
0.246 (6.22)
0.220 (5.59)
0.126 (3.20)
0.114 (2.90)
0.126 (3.20) MIN.
0.280 (7.11)
0.260 (6.60)
0.060 (1.52) MIN.
0.012 (0.305)
0.006 (0.152)
0.320 (8.13) REF.
0.103 (2.62)
0.079 (2.06)
0.060 (1.52)
0.030 (0.76)
0.008 (0.2)
0 (0)
0.320 (8.13)
0.305 (7.75)
www.vishay.com
4
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Document Number: 88407
Revision: 09-Feb-11
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号:
TPSMC6.8/7T
Trans Voltage Suppressor Diode, 1500W, Unidirectional, 1 Element, Silicon, DO-214AB, PLASTIC, SMC, 2 PIN
VISHAY
TPSMC6.8A-HE3/7T
Trans Voltage Suppressor Diode, 1500W, Unidirectional, 1 Element, Silicon, DO-214AB, PLASTIC, SMC, 2 PIN
VISHAY
TPSMC6.8A-HE3/9AT
1500W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AB, ROHS COMPLIANT, PLASTIC, SMC, 2 PIN
VISHAY
TPSMC6.8A-HE3/9T
Trans Voltage Suppressor Diode, 1500W, Unidirectional, 1 Element, Silicon, DO-214AB, PLASTIC, SMC, 2 PIN
VISHAY
TPSMC6.8A/7T
Trans Voltage Suppressor Diode, 1500W, Unidirectional, 1 Element, Silicon, DO-214AB, PLASTIC, SMC, 2 PIN
VISHAY
TPSMC6.8AE3
Trans Voltage Suppressor Diode, 1500W, 5.8V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, LEAD FREE, PLASTIC, SMC, 2 PIN
VISHAY
TPSMC6.8AHE3
Trans Voltage Suppressor Diode, 1500W, 5.8V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, LEAD FREE, PLASTIC, SMC, 2 PIN
VISHAY
©2020 ICPDF网 联系我们和版权申明