UG06B-E3/73 [VISHAY]
DIODE 0.6 A, 100 V, SILICON, SIGNAL DIODE, ROHS COMPLIANT, MINIATURE, PLASTIC, CASE MPG06, 2 PIN, Signal Diode;型号: | UG06B-E3/73 |
厂家: | VISHAY |
描述: | DIODE 0.6 A, 100 V, SILICON, SIGNAL DIODE, ROHS COMPLIANT, MINIATURE, PLASTIC, CASE MPG06, 2 PIN, Signal Diode 二极管 |
文件: | 总4页 (文件大小:68K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UG06A thru UG06D
Vishay General Semiconductor
Miniature Ultrafast Plastic Rectifier
FEATURES
• Glass passivated chip junction
• Ultrafast reverse recovery time
• Soft recovery characteristics
• Low forward voltage drop
• Low switching losses, high efficiency
• High forward surge capability
• Solder dip 275 °C max. 10 s, per JESD 22-B106
MPG06
• Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
TYPICAL APPLICATIONS
PRIMARY CHARACTERISTICS
For use in high frequency rectification and freewheeling
application in switching mode converters and inverters for
consumer, computer and telecommunication.
IF(AV)
0.6 A
VRRM
IFSM
trr
50 V to 200 V
40 A
MECHANICAL DATA
Case: MPG20
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
15 ns
VF
0.95 V
TJ max.
150 °C
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VRRM
VRMS
UG06A
UG06B
100
UG06C
150
UG06D
200
UNIT
Maximum repetitive peak reverse voltage
Maximum RMS voltage
50
V
V
V
A
35
70
105
140
Maximum DC blocking voltage
Maximum average forward rectified current (fig. 1)
VDC
50
100
150
200
IF(AV)
0.6
40
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
IFSM
A
Operating junction and storage temperature range
TJ, TSTG
- 55 to + 150
°C
Document Number: 88757
Revision: 23-Oct-09
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com
1
UG06A thru UG06D
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
VALUE
UNIT
Maximum instantaneous
forward voltage
(1)
IF = 0.6 A
VF
0.95
V
TA = 25 °C
5.0
100
15
Maximum DC reverse current
at rated DC blocking voltage
IR
trr
trr
μA
ns
ns
TA = 100 °C
Maximum reverse recovery time
Maximum reverse recovery time
IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A
TJ = 25 °C
TJ = 100 °C
TJ = 25 °C
TJ = 100 C
25
IF = 0.6 A, VR = 30 V,
dI/dt = 50 A/μs, Irr = 10 % IRM
35
8.0
20
IF = 0.6 A, VR = 30 V,
dI/dt = 50 A/μs, Irr = 10 % IRM
Maximum stored charge
Qrr
CJ
nC
pF
Typical junction capacitance
4 V, 1 MHz
9.0
Note
(1)
Pulse test: 300 μs pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
UG06A
UG06B
UG06C
UG06D
UNITS
(1)
RθJA
97
28
Typical thermal resistance
°C/W
(1)
RθJL
Note
(1)
Thermal resistance from junction to ambient and junction to lead at 0.375" (9.5 mm) lead length, P.C.B. mounted with 0.2" x 0.2" (5.0 mm x 5.0 mm)
copper pads
ORDERING INFORMATION (Example)
PREFERRED P/N
UG06D-E3/54
UG06D-E3/73
UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY
DELIVERY MODE
13" diameter paper tape and reel
Ammo pack packaging
0.181
0.181
54
73
5500
3000
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
0.90
100
TJ = 75 °C
8.3 ms Single Half Sine-Wave
Resistive or Inductive Load
0.375" (9.5 mm) Lead Length
0.75
0.60
0.45
0.30
0.15
0
TL Lead Temperature
10
TA, Ambient Temperature
P.C.B. Mounted
0.2" x 0.2" (5.0 mm x 5.0 mm)
Copper Pads
1
0
25
50
75
100
125
150
175
1
10
100
Number of Cycles at 60 Hz
Temperature (°C)
Fig. 1 - Maximum Forward Current Derating Curves
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
www.vishay.com
2
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Document Number: 88757
Revision: 23-Oct-09
UG06A thru UG06D
Vishay General Semiconductor
100
10
60
50
40
30
20
10
0
trr
Qrr
IF = 0.6 A
VR = 30 V
TJ = 100 °C
dI/dt = 20 A/μs
Pulse Width = 300 μs
1 % Duty Cycle
dI/dt = 50 A/μs
dI/dt = 100 A/μs
dI/dt = 150 A/μs
dI/dt = 150 A/μs
dI/dt = 100 A/μs
1
TJ = 25 °C
0.1
dI/dt = 50 A/μs
dI/dt = 20 A/μs
0.01
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0
25
50
75
100
125
150
175
Instantaneous Forward Voltage (V)
Junction Temperature (°C)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 5 - Reverse Switching Charateristics
1000
100
100
10
1
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
TJ = 100 °C
10
TJ = 25 °C
1
0.1
0.01
0.1
1
10
100
0
20
40
60
80
100
Percent of Rated Peak Reverse Voltage (%)
Reverse Voltage (V)
Fig. 4 - Typical Reverse Leakage Characteristics
Fig. 6 - Typical Junction Capacitance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
MPG06
1.0 (25.4)
MIN.
0.100 (2.54)
0.090 (2.29)
DIA.
0.125 (3.18)
0.115 (2.92)
1.0 (25.4)
MIN.
0.025 (0.635)
0.023 (0.584)
DIA.
Document Number: 88757
Revision: 23-Oct-09
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com
3
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号:
UG06B/23
Rectifier Diode, 1 Element, 0.6A, 100V V(RRM), Silicon, MINIATURE, PLASTIC, CASE MPG06, 2 PIN
VISHAY
UG06BE3
DIODE 0.6 A, 100 V, SILICON, SIGNAL DIODE, LEAD FREE, PLASTIC, MPG06, 2 PIN, Signal Diode
VISHAY
UG06C-E3
DIODE 0.6 A, 150 V, SILICON, SIGNAL DIODE, LEAD FREE, MINIATURE, PLASTIC, CASE MPG06, 2 PIN, Signal Diode
VISHAY
UG06C-E3/54
DIODE 0.6 A, 150 V, SILICON, SIGNAL DIODE, ROHS COMPLIANT, MINIATURE, PLASTIC, CASE MPG06, 2 PIN, Signal Diode
VISHAY
UG06C-E3/73
DIODE 0.6 A, 150 V, SILICON, SIGNAL DIODE, ROHS COMPLIANT, MINIATURE, PLASTIC, CASE MPG06, 2 PIN, Signal Diode
VISHAY
UG06CE3
DIODE 0.6 A, 150 V, SILICON, SIGNAL DIODE, LEAD FREE, PLASTIC, MPG06, 2 PIN, Signal Diode
VISHAY
UG06D-E3
DIODE 0.6 A, 200 V, SILICON, SIGNAL DIODE, LEAD FREE, MINIATURE, PLASTIC, CASE MPG06, 2 PIN, Signal Diode
VISHAY
©2020 ICPDF网 联系我们和版权申明