UG8JTHE3/45 [VISHAY]
High Voltage Ultrafast Rectifier; 高压超快整流器
| 型号： | UG8JTHE3/45 |
| 厂家： | 
VISHAY |
| 描述： | High Voltage Ultrafast Rectifier |
| 文件： | 总5页 (文件大小：144K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
UG(F,B)8HT & UG(F,B)8JT
Vishay General Semiconductor
High Voltage Ultrafast Rectifier
FEATURES
TO-220AC
ITO-220AC
• Glass passivated chip junction
• Ultrafast recovery time
• Soft recovery characteristics
• Low switching losses, high efficiency
• High forward surge capability
2
2
1
1
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 245 °C (for TO-263AB package)
UG8xT
UGF8xT
PIN 1
PIN 1
• Solder dip 260 °C, 40 s (for TO-220AC and
ITO-220AC package)
CASE
PIN 2
PIN 2
TO-263AB
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
K
2
TYPICAL APPLICATIONS
1
For use in high voltage and high frequency power
factor correction application.
UGB8xT
PIN 1
K
PIN 2
HEATSINK
MECHANICAL DATA
Case: TO-220AC, ITO-220AC, TO-263AB
Epoxy meets UL 94V-0 flammability rating
PRIMARY CHARACTERISTICS
IF(AV)
8 A
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix for consumer grade, meets JESD 201 class
1A whisker test, HE3 suffix for high reliability grade
(AEC Q101 qualified), meets JESD 201 class 2
whisker test
VRRM
IFSM
trr
500 V, 600 V
100 A
25 ns
tfr
500 ns
1.5 V
VF
Polarity: As marked
TJ max.
150 °C
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (T = 25 °C unless otherwise noted)
C
PARAMETER
SYMBOL
VRRM
VRWM
VRMS
VDC
UG8HT
500
UG8JT
600
UNIT
Maximum repetitive peak reverse voltage
Maximum working reverse voltage
Maximum RMS voltage
V
V
V
V
A
400
480
350
420
Maximum DC blocking voltage
Maximum average forward rectified current
500
600
IF(AV)
8.0
100
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
IFSM
TJ, TSTG
VAC
A
°C
V
Operating junction and storage temperature range
- 55 to + 150
1500
Isolation voltage (ITO-220AB only)
from terminals to heatsink t = 1 min
Document Number: 88767
Revision: 12-Nov-07
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
1
UG(F,B)8HT & UG(F,B)8JT
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted)
C
PARAMETER
TEST CONDITIONS
SYMBOL
UG8HT
UG8JT
UNIT
IF = 8 A
IF = 8 A
TJ = 25 °C
TJ = 125 °C
1.75
1.50
Maximum instantaneous forward voltage(1)
VF
V
TJ = 25 °C
TJ = 100 °C
TJ = 125 °C
30
800
4.0
µA
µA
mA
Maximum DC reverse current at VRWM
IR
IF = 0.5 A, IR = 1.0 A,
rr = 0.25 A
trr
25
50
ns
ns
-
I
Maximum reverse recovery time
Typical softness factor (tb/ta)
Maximum reverse recovery current
Peak forward recovery time
IF = 1.0 A, dI/dt = 50 A/µs,
R = 30 V, Irr = 0.1 IRM
trr
V
IF = 8.0 A, dI/dt = 240 A/µs,
R = 400 V, Irr = 0.1 IRM
S
1.0
5.5
10
V
IF = 8.0 A, dI/dt = 64 A/µs,
R = 400 V, TC = 125 °C
IRM
IRM
tfr
A
V
IF = 8.0 A, dI/dt = 240 A/µs,
R = 400 V, TC = 125 °C
A
V
IF = 8.0 A, dI/dt = 64 A/µs,
VF = 1.1 x VF max.
500
ns
Note:
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (T = 25 °C unless otherwise noted)
C
PARAMETER
SYMBOL
UG8
UGF
UGB8
2.2
UNIT
Typical thermal resistance from junction to case
RθJC
2.2
5.0
°C/W
ORDERING INFORMATION (Example)
PACKAGE
TO-220AC
ITO-220AC
TO-263AB
TO-263AB
TO-220AC
ITO-220AC
TO-263AB
TO-263AB
PREFERRED P/N
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
50/tube
DELIVERY MODE
Tube
UG8JT-E3/45
1.80
1.95
1.33
1.33
1.80
1.95
1.33
1.33
45
45
45
81
45
45
45
81
UGF8JT-E3/45
50/tube
Tube
UGB8JT-E3/45
50/tube
Tube
UGB8JT-E3/81
800/reel
50/tube
Tape and reel
Tube
UG8JTHE3/45 (1)
UGF8JTHE3/45 (1)
UGB8JTHE3/45 (1)
UGB8JTHE3/81 (1)
50/tube
Tube
50/tube
Tube
800/reel
Tape and reel
Note:
(1) Automotive grade AEC Q101 qualified
www.vishay.com
2
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
Document Number: 88767
Revision: 12-Nov-07
UG(F,B)8HT & UG(F,B)8JT
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES
(T = 25 °C unless otherwise noted)
A
12
10 000
1000
100
Resistive or Inductive Load
TJ = 125 °C
10
8
TJ = 100 °C
UG8, UGB8
6
4
2
0
UG8F
10
TJ = 25 °C
1
25
50
75
100
125
150
175
0
20
40
60
80
100
Case Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Figure 1. Maximum Forward Current Derating Curve
Figure 4. Typical Reverse Leakage Characteristics
1000
100
TJ = TJ max.
8.3 ms Single Half Sine-Wave
10
100
TJ = 25 °C
f = 1.0 MHz
V
sig = 50 mVp-p
1
10
0.1
1
10
100
1
10
100
Reverse Voltage (V)
Number of Cycles at 60 Hz
Figure 2. Maximum Non-Repetitive Peak Forward Surge Current
Figure 5. Typical Junction Capacitance
100
10
1
350
300
250
200
150
100
50
Qrr
Trr
IF = 8.0 A
Vr = 30 V
240 A/µs
60 A/µs
50 A/µs
50 A/µs
0.1
60 A/µs
TJ = 25 °C max.
Pulse Width = 300 µs
1 % Duty Cycle
240 A/µs
100
Junction Capacitance (°C)
0
0.01
25
50
75
125
150
0.5
1.0
1.5
2.0
2.5
3.0
Instantaneous Forward Voltage (V)
Figure 3. Typical Instantaneous Forward Characteristics
Figure 6. Reverse Switching Characteristics
Document Number: 88767
Revision: 12-Nov-07
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
3
UG(F,B)8HT & UG(F,B)8JT
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
ITO-220AC
TO-220AC
0.404 (10.26)
0.190 (4.83)
0.170 (4.32)
0.110 (2.79)
0.100 (2.54)
0.384 (9.75)
0.415 (10.54) MAX.
0.076 (1.93) REF.
0.154 (3.91) DIA.
0.185 (4.70)
0.370 (9.40)
0.360 (9.14)
0.148 (3.74) DIA.
0.175 (4.44)
0.055 (1.39)
7° REF.
0.076 (1.93) REF.
0.113 (2.87)
0.045 (1.14)
0.103 (2.62)
0.140 (3.56) DIA.
0.125 (3.17) DIA.
0.135 (3.43) DIA.
45° REF.
0.122 (3.08) DIA.
0.145 (3.68)
0.671 (17.04)
0.651 (16.54)
0.600 (15.24)
0.135 (3.43)
7° REF.
0.580 (14.73)
0.603 (15.32)
0.573 (14.55)
PIN
0.350 (8.89)
0.330 (8.38)
0.635 (16.13)
0.350 (8.89)
0.330 (8.38)
0.625 (15.87)
1
2
PIN
1.148 (29.16)
1.118 (28.40)
1
2
7° REF.
0.191 (4.85)
0.160 (4.06)
0.140 (3.56)
0.110 (2.79)
0.100 (2.54)
0.171 (4.35)
0.560 (14.22)
0.530 (13.46)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.560 (14.22)
0.057 (1.45)
0.045 (1.14)
PIN 1
PIN 2
0.045 (1.14)
0.530 (13.46)
CASE
0.105 (2.67)
0.095 (2.41)
0.035 (0.89)
0.025 (0.64)
0.205 (5.21)
0.195 (4.95)
0.037 (0.94)
0.025 (0.64)
0.027 (0.68)
0.022 (0.56)
0.014 (0.36)
0.015 (0.38)
0.028 (0.71)
0.020 (0.51)
0.205 (5.20)
0.195 (4.95)
TO-263AB
0.411 (10.45)
0.380 (9.65)
0.245 (6.22)
MIN.
0.190 (4.83)
Mounting Pad Layout
0.42 (10.66) MIN.
0.055 (1.40)
0.045 (1.14)
0.160 (4.06)
K
0.055 (1.40)
0.047 (1.19)
0.33 (8.38) MIN.
0.360 (9.14)
0.320 (8.13)
0.624 (15.85)
1
K
2
0.591 (15.00)
0.670 (17.02)
0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.15 (3.81) MIN.
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
0.08 (2.032) MIN.
0.140 (3.56)
0.110 (2.79)
0.205 (5.20)
0.195 (4.95)
0.105 (2.67)
0.095 (2.41)
www.vishay.com
4
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
Document Number: 88767
Revision: 12-Nov-07
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号：
©2020 ICPDF网 联系我们和版权申明