DCUPH6-48S09 [WALL]
6 Watts DC/DC Power Supply Module Single Output;
| 型号： | DCUPH6-48S09 |
| 厂家： | 
WALL INDUSTRIES,INC. |
| 描述： | 6 Watts DC/DC Power Supply Module Single Output |
| 文件： | 总5页 (文件大小：437K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DCUPH6 SERIES
6 Watts
DC/DC Power Supply Module
Single Output
Rev A
FEATURES
• Ultra Wide 4:1 Input Voltage
Range
• Over Current, Over Voltage, and Short
Circuit Protection
• International Standard Pin-Out
• High Efficiency
• Isolated & Regulated Single
Output
• Input Under Voltage Protection
• Transformer Creepage 8mm
• Transformer Clearance 5mm
• CE Certified
• EN60601-1 (3rd Edition) Medical Approval
• RoHS Compliant
DESCRIPTION
The DCUPH6 series of DC/DC converters offers up to 6 watts of output power in
an ultra-compact 1.24” x 0.80” x 0.40” DIP package. This series consists of single
output models with an ultra-wide 4:1 input voltage range. Each model in this series
features high efficiency, international standard pin-out, as well as protection
against over current, over voltage, short circuit, and input under voltage conditions.
This series has EN60601-1 (3rd Edition) approval and is RoHS compliant.
Size: 1.24in x 0.80in x 0.40in (31.6mm x 20.30mm x 10.20mm)
MODEL SELECTION TABLE
Output Current
Min Load Max Load
Output
Voltage
Maximum
Capacitive Load
Efficiency
(Typ. @Full Load)
Output
Power
Model Number Input Voltage Range
Ripple & Noise
100mVp-p
DCUPH6-24S05
DCUPH6-24S06
5VDC
6VDC
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
1200mA
1000mA
667mA
500mA
400mA
250mA
1200mA
667mA
500mA
400mA
250mA
2700µF
2200µF
1800µF
1000µF
680µF
79/81%
79/81%
81/83%
82/84%
83/85%
82/84%
79/81%
81/83%
82/84%
83/85%
82/84%
DCUPH6-24S09
DCUPH6-24S12
DCUPH6-24S15
DCUPH6-24S24
DCUPH6-48S05
DCUPH6-48S09
DCUPH6-48S12
DCUPH6-48S15
DCUPH6-48S24
9VDC
24VDC
(9~36VDC)
6W
6W
12VDC
15VDC
24VDC
5VDC
470µF
2700µF
1800µF
1000µF
680µF
9VDC
48VDC
(18~75VDC)
12VDC
15VDC
24VDC
100mVp-p
470µF
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
24VDC Nominal Input
48VDC Nominal Input
24VDC Nominal Input
48VDC Nominal Input
9
18
24
48
36
75
40
80
8
Input Voltage Range
VDC
VDC
mA
Absolute Maximum Input Voltage(1)
24VDC Nominal Input
48VDC Nominal Input
24VDC Nominal Input
48VDC Nominal Input
5
4
309
154
No Load
Full Load
7
Input Current
317
159
50
100
mA
24VDC Nominal Input
48VDC Nominal Input
24VDC Nominal Input
48VDC Nominal Input
24VDC Nominal Input
48VDC Nominal Input
24VDC Nominal Input
48VDC Nominal Input
-0.7
-0.7
Input Impulse Voltage (1 sec. max)
Reflected Ripple Current
Starting Voltage
VDC
mA
20
20
9
18
VDC
VDC
5.5
14
6.5
15.5
Input Under-Voltage Protection
Input Filter
Hot Plug
Pi Filter
Unavailable
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
10/10/2017
Page 1 of 5
website: www.wallindustries.com • e-mail: sales@wallindustries.com
DCUPH6 SERIES
6 Watts
DC/DC Power Supply Module
Single Output
Rev A
SPECIFICATIONS
All specifications are based on 25°C, Humidity <75%RH, Nominal Input Voltage, and Rated Output unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Voltage Accuracy
±1
±0.2
±0.5
±3
±0.5
±1
%
%
%
Line Voltage Regulation
Full Load, from low to high voltage
5%-100% Load
Load Regulation(2)
Output Power
See Table
Output Current
See Table
No Load Power Consumption
Maximum Capacitive Load
Ripple & Noise(3)
0.12
W
Tested within input voltage range and under full load condtions
20MHz bandwidth
25% load step change
See Table
100
300
±3
180
500
±5
mVp-p
µs
%
Transient Recovery Time
Transient Response Deviation 25% load step change
Temperature Drift Coefficient Full Load
PROTECTION
±0.03
%/ºC
Short Circuit Protection
Over Current Protection
Over Voltage Protection
Input Voltage Range
Input Voltage Range
Input Voltage Range
Continuous, Self-Recovery
110
110
150
260
160
%Io
%Vo
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Storage Humidity
Lead Temperature
Vibration
Derating if temperature ≥71ºC
-40
-55
5
85
125
95
ºC
ºC
%RH
ºC
Without condensation
Welding spot is 1.5mm away from the casing, 10 seconds
300
10-55Hz, 10G, 30min. along X, Y, and Z
MTBF
MIL-HDBK-217F@25ºC
1000
KHrs
GENERAL SPECIFICATIONS
Efficiency
See Table
300
Switching Frequency(4)
Insulation Voltage
Insulation Resistance
Isolation Capacitance
PWM mode (nominal, full load)
Input to Output, test time of 1 minute & leak current lower than 1mA
Input to Output, Insulation Voltage 500VDC
Input to Output, 100KHz/0.1V
KHz
VDC
MΩ
pF
6000
10000
13
20
Transformer Creepage
Transformer Clearance
PCB Creepage & Clearance
Optocoupler Creepage
8.0
5.0
8.0
8.0
Enhanced Isolation
mm
PHYSICAL SPECIFICATIONS
Weight
0.46oz (13g) typ.
1.24in x 0.80in x 0.40in
Dimensions (L x W x H)
Case Material
(31.6mm x 20.30mm x 10.20mm)
Black Flame-Retardant and Heat-Resistant
Plastic (UL94-V0)
Cooling
Free Air Convection
SAFETY CHARACTERISTICS
Safety Approvals
EMI
EN60601-1 (3rd Edition)
CE
ESD
EFT
Surge
CISPR22/EN55022
Contact ±6kV
±2kV(5)
Class A (Bare Component)
Perf. Criteria B
IEC/EN61000-4-2
IEC/EN61000-4-4
IEC/EN61000-4-5
IEC/EN61000-4-6
Perf. Criteria B
Perf. Criteria B
Perf. Criteria A
±2kV(5)
3Vr.m.s
EMS
CS
Immunities of Voltage Dip, Drop
& Short Interruption
IEC/EN61000-4-29
0-70%
Perf. Criteria A
NOTES
1. This is the absolute maximum rating the converter can operate at without damage, but it is not recommended.
2. When testing from 0% to 100% load working conditions, load regulation index of ±5%.
3. 0%-5% load ripple & noise is no more than 5%Vo. Ripple and noise tested with “parallel cable” method, oscilloscope using the 1X probe. Contact
factory for more specific operation methods.
4. This series uses frequency technology, the switching frequency is the test value for full load. When load is reduced below 50%, the switching
frequency decreases with decreasing load.
5. See EMC solution ① for recommendation circuit.
6. Customization available.
*Due to advances in technology, specifications subject to change without notice.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
10/10/2017
Fax 603-778-9797
Page 2 of 5
website: www.wallindustries.com • e-mail: sales@wallindustries.com
DCUPH6 SERIES
6 Watts
DC/DC Power Supply Module
Single Output
Rev A
DERATING CURVES
Temperature Derating Curve
EFFICIENCY GRAPHS
Efficiency vs. Input (Full Load) DCUPH6-24S05
Efficiency vs. Output Load (Vin=Vin-nominal) DCUPH6-24S05
Efficiency vs. Input Voltage (Full Load) DCUPH6-48S15
Efficiency vs. Output Load (Vin=Vin-nominal) DCUPH6-48S15
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
10/10/2017
Fax 603-778-9797
Page 3 of 5
website: www.wallindustries.com • e-mail: sales@wallindustries.com
DCUPH6 SERIES
6 Watts
DC/DC Power Supply Module
Single Output
Rev A
MECHANICAL DRAWINGS
Note: Grid 2.54*2.54mm
Pin Out
Function
Pin
1
Vin
11
12
13
15
23
24
No Pin
0V
+Vo
No Pin
GND
Notes:
Unit: mm [inch]
Pin diameter tolerances: ±0.10 [±0.004]
General Tolerances: ±0.50 [±0.020]
GND
NC: No Connection
DESIGN REFERENCE
1. Typical Application
All the DC/DC converters of this series are tested according to the recommended circuit before delivery. If it is required to further reduce
input and output ripple, properly increase the input & output of additional capacitors Cin and Cout or select capacitors of low equivalent
impedance provided that the capacitance is no larger than the max. capacitive load of the product.
Vin
24VDC
48VDC
Cin
100uF
10µF-47µF
Cout
10µF
10µF
2. Recommended Circuit
Parameter Description
Vin:24V
Model
Vin:48V
FUSE
MOV
C0
Choose according to actual input current
S20K30
S14K60
330µF/50V
330µF/100V
C1
Refer to Cout in “Typical Application” above
Notes: Part ① above is used for EMS test.
3. The product does not support output in parallel with power per liter.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
10/10/2017
Page 4 of 5
website: www.wallindustries.com • e-mail: sales@wallindustries.com
DCUPH6 SERIES
6 Watts
DC/DC Power Supply Module
Single Output
Rev A
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
(603)778-2300
Toll Free: (888)597-9255
Fax:
(603)778-9797
E-mail:
Web:
sales@wallindustries.com
www.wallindustries.com
Address: 37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
10/10/2017
Page 5 of 5
website: www.wallindustries.com • e-mail: sales@wallindustries.com
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明