JFC12D12-10FHC [WALL]
10 Watt DC/DC Power Converters;
| 型号： | JFC12D12-10FHC |
| 厂家： | 
WALL INDUSTRIES,INC. |
| 描述： | 10 Watt DC/DC Power Converters |
| 文件： | 总5页 (文件大小：469K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
JFC10 SERIES
10 Watt DC/DC Power Converters
Rev B
FEATURES
• High Efficiency up to 91%
• Remote On/Off Control
• 2:1 Wide Input Voltage Ranges
• Six-Sided Continuous Shielding
• Ultra Low Quiescent Current
• Built-in EN55022 Class B Filter
• 10 Watts Maximum Output Power
• Short Circuit, Over Voltage, Over Load, & Under-Voltage
Protection
• Wide Operating Temperature Range: -40°C to +85°C
• Compliant to RoHS EU Directive 2011/65/EU
• UL60950-1, EN60950-1, & IEC60950-1 Safety Approvals
• CE Mark meets 2006/95/EC, 2011/95/EC, and 2004/108/EC
• Optional Heatsink Available (Suffix “HC”)
• No Minimum Load Requirements
• Single and Dual Outputs
• Fixed Switching Frequency
Size:
1.00 x 1.00 x 0.39 inches
(25.4 x 25.4 x 9.9 mm)
DESCRIPTION
The JFC10 series of DC/DC power converters provides 10 Watts of output power in an industry standard
1.00” x 1.00” x 0.39” package and footprint. This series has single and dual output models with 2:1 wide
input voltage ranges of 9-18VDC, 18-36VDC, and 36-75VDC. Some features include high efficiency up to
91%, 1600VDC I/O isolation, six-sided shielding, and remote on/off control. These converters are also
protected against short circuit, over voltage, over load, and under-voltage. All models are RoHS compliant
and have UL60950-1, EN60950-1, and IEC60950-1 safety approvals. This series is best suited for use in
wireless networks, telecom/datacom, industry control systems, measurement equipment, and
semiconductor equipment.
Options:
• Negative Logic Remote ON/OFF
• Without Trim pin
• Without CTRL Pin
• Heatsink
MODEL SELECTION TABLE
SINGLE OUTPUT MODELS
Output
Voltage
Output Current
Output
No Load
Output
Maximum
Capacitive Load
Model Number Input Voltage Range
JFC12S33-10
Efficiency
Min Load Max Load Ripple & Noise Input Current Power
3.3 VDC
5 VDC
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
3000mA
2000mA
830mA
670mA
416mA
3000mA
2000mA
830mA
670mA
416mA
3000mA
2000mA
830mA
670mA
416mA
40mVp-p
40mVp-p
60mVp-p
60mVp-p
60mVp-p
40mVp-p
40mVp-p
60mVp-p
60mVp-p
60mVp-p
40mVp-p
40mVp-p
60mVp-p
60mVp-p
60mVp-p
10mA
10mA
10mA
10mA
10mA
6mA
6mA
6mA
6mA
6mA
4mA
4mA
4mA
4mA
4mA
9.9W
10W
10W
10W
10W
9.9W
10W
10W
10W
10W
9.9W
10W
10W
10W
10W
83%
86%
89%
90%
91%
85%
86%
91%
90%
91%
85%
87%
90%
90%
91%
3500µF
2500µF
430µF
350µF
125µF
3500µF
2500µF
430µF
350µF
125µF
3500µF
2500µF
430µF
350µF
125µF
JFC12S05-10
12 VDC
JFC12S12-10
(9 – 18 VDC)
JFC12S15-10
12 VDC
15 VDC
24 VDC
3.3 VDC
5 VDC
JFC12S24-10
JFC24S33-10
JFC24S05-10
24 VDC
JFC24S12-10
(18 – 36 VDC)
JFC24S15-10
12 VDC
15 VDC
24 VDC
3.3 VDC
5 VDC
JFC24S24-10
JFC48S33-10
JFC48S05-10
48 VDC
JFC48S12-10
(36 – 75 VDC)
JFC48S15-10
12 VDC
15 VDC
24 VDC
JFC48S24-10
DUAL OUTPUT MODELS
Output Current
Output
Voltage
Output
No Load
Output
Maximum
Capacitive Load
Model Number Input Voltage Range
Efficiency
Ripple & Noise Input Current Power
Min Load Max Load
JFC12D05-10
12 VDC
±5 VDC
±12 VDC
±15 VDC
±5 VDC
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
±1000mA
±416mA
±333mA
±1000mA
±416mA
±333mA
±1000mA
±416mA
±333mA
40mVp-p
60mVp-p
60mVp-p
40mVp-p
60mVp-p
60mVp-p
40mVp-p
60mVp-p
60mVp-p
10mA
10mA
10mA
6mA
6mA
6mA
4mA
4mA
4mA
10W
10W
10W
10W
10W
10W
10W
10W
10W
86%
89%
90%
86%
90%
90%
87%
91%
90%
±1440µF
±250µF
±180µF
±1440µF
±250µF
±180µF
±1440µF
±250µF
±180µF
JFC12D12-10
(9 – 18 VDC)
JFC12D15-10
JFC24D05-10
24 VDC
JFC24D12-10
(18 – 36 VDC)
JFC24D15-10
±12 VDC
±15 VDC
±5 VDC
JFC48D05-10
48 VDC
JFC48D12-10
(36 – 75 VDC)
JFC48D15-10
±12 VDC
±15 VDC
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
02/03/2014
Page 1 of 5
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFC10 SERIES
10 Watt DC/DC Power Converters
Rev B
SPECIFICATIONS: JFC10 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT SPECIFICATIONS
TEST CONDITIONS
Min
Typ Max Unit
12VDC nominal input models
9
18
36
12
24
48
18
36
75
9
18
36
Input Voltage Range
Start-Up Voltage
24VDC nominal input models
48VDC nominal input models
12VDC nominal input models
24VDC nominal input models
48VDC nominal input models
12VDC nominal input models
24VDC nominal input models
48VDC nominal input models
12VDC nominal input models
24VDC nominal input models
48VDC nominal input models
VDC
VDC
VDC
8
16
33
Shutdown Voltage
25
50
100
Input Surge Voltage (1sec, max.)
VDC
Input Reflected Ripple Current
Input Current
OUTPUT SPECIFICATIONS
Output Voltage
30
mAp-p
No Load
See Table
See Table
Voltage Accuracy
-1.0
-0.2
-0.5
-0.2
-1.0
-0.1
-0.8
+1.0
%
%
Single Output Models
Dual Output Models
Single Output Models
Dual Output Models
Single Output Models
Dual Output Models
+0.2
+0.5
+0.2
+1.0
+0.1
+0.8
Line Regulation
Load Regulation
Low line to high line at full load
No load to full load
%
%
%
%
10% load to 90% load
Cross Regulation (Dual Output
Models)
Asymmetrical load 25% / 100% FL
Single Output Models
-5.0
+5.0
3.3V & 12V Output Models
Others
-10
-10
+10
+20
10
Voltage Adjustability (See Note 1)
Rated
Output Power
With Trim up 10%
With Trim up 20%
11
12
W
%
Output Current
Minimum Load
See Table
0
Maximum Capacitive Load
Minimum input and constant resistive load
With 10µF/25V X7R 1206 MLCC
With 10µF/25V X7R 1206 MLCC
With 1µF/50V X7R 1206 MLCC
See Table
40
60
3.3V & 5V Output Models
12V & 15V Output Models
24V Output Models
Ripple & Noise (20MHz BW)
60
mVp-p
With 10µF/25V X7R 1206 MLCC for each output ±5V Output Models
40
With 10µF/25V X7R 1206 MLCC for each output ±12V & ±15V Output Models
60
Transient Response Recovery Time 25% load step change
250
µs
ms
Power Up
Remote ON/OFF
30
30
Start-Up Time
Nom. input and constant resistive load
Temperature Coefficient
PROTECTION
-0.02
+0.02
%/°C
Short Circuit Protection
Over Load Protection
continuous, automatic recovery
% of rated full load at nominal input
Zener diode clamp
150
%
3.3V Output Models
5V Output Models
12V Output Models
15V Output Models
24V Output Models
3.7
6.3
5.4
7.4
Over Voltage Protection
13.5
18.3
29.1
19.6
22.0
32.5
VDC
GENERAL SPECIFICATIONS
Efficiency
Switching Frequency
Nominal input voltage and full load
3.3V & 5V Output Models
See Table
330 363
297
1600
1000
1000
1
kHz
Input to Output
Input to Case
Output to Case
Isolation Voltage
1 minute
500VDC
VDC
Isolation Resistance
Isolation Capacitance
GΩ
pF
1500
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
02/03/2014
Page 2 of 5
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFC10 SERIES
10 Watt DC/DC Power Converters
Rev B
SPECIFICATIONS: JFC10 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
REMOTE ON/OFF (See Note 4)
DC/DC ON
DC/DC OFF
DC/DC ON
DC/DC OFF
Open or 3V < Vr < 15 VDC
Positive Logic (standard)
Negative Logic (optional)
The CTRL pin is referenced to –Input pin
The CTRL pin is referenced to –Input pin
Short or 0V < Vr < 1.2 VDC
Short or 0V <Vr < 1.2 VDC
Open or 3V < Vr < 15 VDC
Input Current of Remote Control Pin Nominal Vin
-0.5
1.0
2.5
mA
mA
Remote OFF State Input Current
Nominal Vin
ENVIRONMENTAL SPECIFICATIONS
Operating Ambient Temperature
Maximum Case Temperature
Storage Temperature
With derating
-40
-55
+85
+105
°C
°C
°C
+125
Without Heatsink
With Heatsink
16.18
Thermal Impedance (See Note 6)
Natural Convection
°C/W
15.13
Relative Humidity
Thermal Shock
Vibration
5
95
% RH
MIL-STD-810F
MIL-STD-810F
3,308,000 hours
MTBF
MIL-HDBK-217F Ta=25°C, full load
PHYSICAL SPECIFICATIONS
Weight
0.58oz (16.5g)
Dimensions (L x W x H)
Case Material
1.00x1.00x0.39 inch (25.4x25.4x9.9 mm)
Copper
Base Material
FR4 PCB
Potting Material
Silicon (UL94-V0)
Six-sided
Shielding
SAFETY & EMC CHARACTERISTICS
Safety Approvals
UL60950-1, IEC60950-1, EN60950-1
Class A, Class B
EMI (See Note 3)
EN55022
Air ±8kV
Contact ±6kV
ESD
EN61000-4-2
Perf. Criteria A
Radiated Immunity
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
10 V/m
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Fast Transient (See Note 2)
Surge (See Note 2)
±2kV
±1kV
Conducted Immunity
3 Vrms
NOTES
1.Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external
resistor between the Trim pin and either the +Vout pin or the –Vout pin.
2.An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor suggested is Nippon
chemi-con KY
series, 220µF/100V.
3.The JFC10 series standard modules meet EN55022 Class A without external components and meet Class B with external components. For
more details please call factory.
4.Both positive logic and negative logic remote on/off control is available. Positive logic remote on/off comes standard; for negative logic remote
on/off add the suffix “R” to the model number (Ex: JFC24S05-10R).
5.There are several different options available for this series. Please see the “Model Number Setup” on page 5 for all options and ordering
information.
6.Optional heatsink is available. Please call factory for more information.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
*Due to advances in technology, specifications subject to change without notice.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
02/03/2014
Fax 603-778-9797
Page 3 of 5
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFC10 SERIES
10 Watt DC/DC Power Converters
Rev B
DERATING & EFFICIENCY CURVES
JFC48S05-10 Derating Curve
JFC48S05-10 Derating Curve with Heatsink
JFC48S05-10 Efficiency vs Input Voltage
JFC48S05-10 Efficiency vs Output Load
MECHANICAL DRAWING
PIN CONNECTIONS
PRODUCT OPTIONS
OPTION
PIN
1
SINGLE
+INPUT
-INPUT
CTRL
DUAL
+INPUT
SUFFIX
Positive Logic Remote On/Off
Negative Logic Remote On/Off
Without CTRL Pin
None
R
2
-INPUT
CTRL
3
D
4
+OUTPUT
TRIM
+OUTPUT
COMMON
Without CTRL and TRIM Pins
Positive Logic without TRIM Pin
G
5
F
Negative Logic without TRIM
Pin
Heatsink
6
-OUTPUT
-OUTPUT
RF
HC
EXTERNAL OUTPUT TRIMMING
Output can be externally trimmed by using
the method shown below
NOTES
1. Unit: inches (mm)
2. Tolerance: X.XX±0.02 (X.X±0.5)
X.XXX±0.01 (X.XX±0.25)
3. Pin Pitch Tolerance: ±0.01 (±0.25)
Pin Dimension Tolerance: ±0.004
(±0.1)
4.
5. All dimensions are for reference only
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
02/03/2014
Page 4 of 5
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFC10 SERIES
10 Watt DC/DC Power Converters
Rev B
EMI CONSIDERATIONS
Suggested Schematic for EN55022 Conducted & Radiated Emissions
Recommended Layout with Input Filter
Component
C1
Value
10µF
Voltage
25V
Reference
1812 MLCC
MODEL NUMBER SETUP
JFC
24
S
05 - 10
R
H
Remote ON/OFF, CTRL, and TRIM
Pins
Series Name
Input Voltage
Output Quantity Ouptut Voltage
Output Power
Heatsink
None
:
12: 9-18 VDC
S: Single Output 33: 3.3 VDC
05: 5 VDC
10: 10 Watts None: Positive Logic Remote On/Off
R: Negative Logic Remote On/Off
No Heatsink
18-36
24:
HC: Heatsink
VDC
36-75
VDC
48:
12: 12 VDC
15: 15 VDC
24: 24 VDC
D: Without CTRL Pin
G: Without CTRL and TRIM Pins
Positive Logic without TRIM
Pin
F:
Negative Logic without TRIM
Pin
D: Dual Output
05: ±5 VDC
RF:
12: ±12 VDC
15: ±15 VDC
COMPANY
INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will
provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example
of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its
customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for
your project above and beyond the design and production phases. Give us a call today to discuss your future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
(603)778-2300
(888)597-9255
(603)778-9797
E-mail:
Web:
Address:
sales@wallindustries.com
www.wallindustries.com
5 Watson Brook Road
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
02/03/2014
Page 5 of 5
website: www.wallindustries.com • e-mail: sales@wallindustries.com
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明