JFCW24S15-3000G [WALL]

Up to 15 Watts DC/DC Converter Single Output;
JFCW24S15-3000G
型号: JFCW24S15-3000G
厂家: WALL INDUSTRIES,INC.    WALL INDUSTRIES,INC.
描述:

Up to 15 Watts DC/DC Converter Single Output

文件: 总11页 (文件大小:863K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
JFCW SERIES  
Up to 15 Watts  
DC/DC Converter  
Rev G  
Single and Dual Output  
Size: 1.0in x 1.0in x 0.39in (25.4mm x 25.4mm x 9.9mm)  
OPTIONS  
Negative Logic Remote On/Off  
Without Trim  
Without On/Off Pin  
Input Voltage  
FEATURES  
Six-Sided Shielding  
Small Size and Low Profile: 1” x 1” x 0.39”  
UL60950-1, EN60950-1, and IEC60950-1 Safety Approvals  
CE Marked  
Input Under Voltage, Over Current, Short Circuit, and Over  
Voltage Protection  
Single and Dual Outputs Available  
Negative logic remote On/Off Optional  
Input Voltage of 9~36VDC or 18~75VDC  
High Efficiency up to 91%  
Fixed Switching Frequency  
1600VDC Input to Output Isolation  
4:1 Ultra Wide Input Voltage Range  
ISO90001 Certified Manufacturing  
Facilities  
Output Voltage  
Compliant to RoHS II & Reach  
APPLICATIONS  
DESCRIPTION  
Measurement  
The JFCW series of single and dual output DC DC converters provide up to 15 watts output power in an  
industry standard package and footprint. These units are specifically designed to meet power needs in a low  
profile package. All models feature a 4:1 wide input voltage range of 9~36VDC or 18~75VDC. Some  
features include positive or negative remote on/off, 1600VDC I/O isolation, and trimmable output voltage. All  
models are protected against over current, over voltage, input under voltage, and short circuit conditions.  
Telecom/Datacom  
Wireless Networks  
Industry Control Systems  
Semiconductor Equipment  
MODEL SELECTION TABLE  
Single Output Models  
Input Voltage  
Model Number  
Output  
Voltage  
No Load  
Output  
Maximum  
Output Current  
Ripple & Noise  
Efficiency(3)  
Range  
Input Current(1) Power Capacitive Load(2)  
JFCW24S3.3-4000  
JFCW24S5-3000  
3.3VDC  
5VDC  
4000mA  
3000mA  
1300mA  
1000mA  
625mA  
75mVp-p  
75mVp-p  
100mVp-p  
100mVp-p  
100mVp-p  
75mVp-p  
75mVp-p  
100mVp-p  
100mVp-p  
100mVp-p  
45mA  
70mA  
20mA  
20mA  
12mA  
25mA  
35mA  
12mA  
12mA  
10mA  
12000µF  
6000µF  
1000µF  
660µF  
86%  
86%  
87%  
87%  
90%  
86%  
87%  
87%  
87%  
91%  
9~36  
JFCW24S12-1300  
(24VDC)  
Up to  
15W  
12VDC  
15VDC  
24VDC  
3.3VDC  
5VDC  
JFCW24S15-1000  
JFCW24S24-625  
JFCW48S3.3-4000  
JFCW48S5-3000  
200µF  
4000mA  
3000mA  
1300mA  
1000mA  
625mA  
12000µF  
6000µF  
1000µF  
660µF  
18~75  
(48VDC)  
Up to  
15W  
JFCW48S12-1300  
12VDC  
15VDC  
24VDC  
JFCW48S15-1000  
JFCW48S24-625  
200µF  
Dual Output Models  
JFCW24D5-1500  
±5VDC  
±12VDC  
±15VDC  
±24VDC  
±5VDC  
±1500mA  
±625mA  
±500mA  
±315mA  
±1500mA  
±625mA  
±500mA  
±315mA  
100mVp-p  
100mVp-p  
100mVp-p  
100mVp-p  
100mVp-p  
100mVp-p  
100mVp-p  
100mVp-p  
20mA  
20mA  
20mA  
15mA  
12mA  
15mA  
20mA  
10mA  
±3000µF  
±520µF  
±330µF  
±100µF  
±3000µF  
±520µF  
±330µF  
±100µF  
85%  
87%  
88%  
91%  
85%  
86%  
87%  
91%  
JFCW24D12-625  
JFCW24D15-500  
JFCW24D24-315  
JFCW48D5-1500  
JFCW48D12-625  
JFCW48D15-500  
JFCW48D24-315  
9~36  
(24VDC)  
Up to  
15W  
±12VDC  
±15VDC  
±24VDC  
18~75  
(48VDC)  
Up to  
15W  
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •  
Fax 603-778-9797  
1/9/2018  
Page 1 of 11  
website: www.wallindustries.com • e-mail: sales@wallindustries.com  
JFCW SERIES  
Up to 15 Watts  
DC/DC Converter  
Rev G  
Single and Dual Output  
SPECIFICATIONS  
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.  
We reserve the right to change specifications based on technological advances.  
SPECIFICATION  
TEST CONDITIONS  
Min  
Typ  
Max  
Unit  
INPUT SPECIFICATIONS  
24Vin(nom)  
48Vin(nom)  
9
18  
24  
48  
36  
75  
Operating Input Voltage Range  
Input Reflected Ripple Current  
Start-Up Voltage  
VDC  
mAp-p  
VDC  
Nominal Input and Full Load  
30  
24Vin(nom)  
48Vin(nom)  
24Vin(nom)  
48Vin(nom)  
9
18  
8
12  
Shutdown Voltage  
Input Surge Voltage  
VDC  
VDC  
24Vin(nom)  
48Vin(nom)  
50  
100  
100ms, max.  
Input Filter  
Pi Type  
OUTPUT SPECIFICATIONS  
Output Voltage  
Voltage Accuracy  
See Table  
+1.0  
-1.0  
-0.2  
-0.5  
-0.2  
-1.0  
-10  
%
%
Single  
Dual  
Single  
Dual  
24Vout  
All Others  
+0.2  
+0.5  
+0.2  
+1.0  
+20  
Line Regulation  
Low Line to High Line at Full Load  
No Load to Full Load  
Load Regulation  
Voltage Adjustability(4)  
%
Single Output  
%
%
-10  
+10  
Cross Regulation  
Output Power  
Asymmetrical load 25%/100% FL, Dual  
-5.0  
+5.0  
See Table  
Output Current  
Maximum Capacitive Load  
See Table  
See Table  
Single  
With a 1µF M/C X7R and a 10µF T/C  
With a 1µF M/C X7R and a 10µF T/C  
With a 6.8µF/50V X7R MLCC  
3.3Vout, 5Vout  
12Vout, 15Vout  
24Vout  
75  
100  
100  
Ripple & Noise (20MHz bandwidth)  
mVp-p  
Dual  
With a 4.7µF/50V X7R MLCC for each output  
With a 1µF M/C X7R and a 10µF T/C for each output Others  
25% Load Step Change  
24Vout  
100  
100  
250  
Transient Response Recovery Time  
Start-Up Time  
µS  
ms  
Power Up  
Remote On/Off  
30  
30  
Constant Resistive Load  
Temperature Coefficient  
REMOTE ON/OFF CONTROL  
-0.02  
-0.5  
+0.02  
%/ºC  
DC-DC On  
DC-DC Off  
DC-DC On  
DC-DC Off  
Open or 3~15VDC  
Short or 0~1.2VDC  
Short or 0~1.2VDC  
Open or 3~15VDC  
1.0  
Positive Logic (Standard)  
Negative Logic (Option)  
Referred to –Vin pin  
Referred to –Vin pin  
Input Current of CTRL Pin  
Remote OFF Input Current  
PROTECTION  
mA  
mA  
2.5  
Short Circuit Protection  
Over Load Protection  
Continuous, Automatic Recovery  
150  
% of lout rated; Hiccup mode  
%
3.3Vout  
5Vout  
3.7  
5.6  
5.4  
7.0  
Over Voltage Protection  
12Vout  
15Vout  
24Vout  
13.5  
16.8  
29.1  
19.6  
20.5  
32.1  
VDC  
ENVIRONMENTAL SPECIFICATIONS  
Operating Ambient Temperature  
Without Derating  
With Derating  
-40  
+60  
+60  
+105  
ºC  
Maximum Case Temperature  
Storage Temperature Range  
Relative Humidity  
105  
+125  
95  
ºC  
ºC  
%RH  
-55  
5
Thermal Shock  
MIL-STD-810F  
18.2  
15.8  
Without Heat-Sink  
With Heat-Sink  
Thermal Impedance(5)  
Natural Convention (20LFM)  
MIL-HDBK-217F, Full Load  
ºC/W  
Vibration  
MTBF  
MIL-STD-810F  
1.459 x 106 hrs  
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •  
Fax 603-778-9797  
1/9/2018  
Page 2 of 11  
website: www.wallindustries.com • e-mail: sales@wallindustries.com  
JFCW SERIES  
Up to 15 Watts  
DC/DC Converter  
Rev G  
Single and Dual Output  
SPECIFICATIONS  
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.  
We reserve the right to change specifications based on technological advances.  
SPECIFICATION  
GENERAL SPECIFICATIONS  
Efficiency  
TEST CONDITIONS  
Min  
Typ  
Max  
440  
Unit  
See Table  
Switching Frequency  
360  
400  
kHz  
Input to Output  
Input (Output) to Case  
1600  
1000  
1
Isolation Voltage  
1 minute  
500VDC  
VDC  
Isolation Resistance  
Isolation Capacitance  
PHYSICAL SPECIFICATIONS  
Weight  
GΩ  
pF  
1000  
0.53oz (15g)  
1in x 1in x 0.39in  
(25.4mm x 25.4mm x 9.9mm)  
Dimensions (L x W x H)  
Case Material  
Nickel-Coated Copper  
Base Material  
FR4 PCB  
Potting Material  
Epoxy (UL94 V-0)  
SAFETY & EMC CHARACTERISTICS  
UL60950-1  
EN60950-1  
IEC60950-1  
Safety Approvals  
EMI(6)  
Pending: JFCWxxS24-xxxx, JFCWxxD24-xxxx  
EN55022  
Class A, Class B  
ESD  
EN61000-4-2  
EN61000-4-3  
EN61000-4-4  
EN61000-4-5  
EN61000-4-6  
EN61000-4-8  
Air ±8kV and Contact ±6kV  
10 V/m  
±2kV  
±1kV  
Perf. Criteria A  
Perf. Criteria A  
Perf. Criteria A  
Perf. Criteria A  
Perf. Criteria A  
Perf. Criteria A  
Radiated Immunity  
Fast Transient(7)  
Surge(7)  
Conducted Immunity  
Power Frequency Magnetic Field  
3 Vr.m.s  
100A/m continuous; 1000A/m 1 second  
NOTES  
(1) Typical value at nominal input voltage and no load.  
(2) Test by minimum input and constant resistive load.  
(3) Typical value at nominal input voltage and full load.  
(4) Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external  
resistor between the Trim pin and either +Vout pin or –Vout pin.  
(5) For Heat Sink option add the suffix “HS” to part number (Ex: JFCW48S5-3000HS) (P/N: 7G-0047C-F).  
See attached drawings for more details (pg 5-7).  
(6) The standard module meets EN55022 Class A and Class B with external capacitors connected in parallel to the input pins.  
Recommended: 24Vin: 6.8µF/50V * 2 pcs 1812 MLCC  
48Vin: 2.2µF/100 * 2 pcs 1812 MLCC  
(7) An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.  
The filter capacitor suggested is Nippon chemi-con KY Series, 220µF/100V, ESR 48mΩ  
Caution: This power module is not internally fused. An input line fuse must always be used.  
*Due to advances in technology, specifications subject to change without notice.  
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •  
1/9/2018  
Fax 603-778-9797  
Page 3 of 11  
website: www.wallindustries.com • e-mail: sales@wallindustries.com  
JFCW SERIES  
Up to 15 Watts  
DC/DC Converter  
Rev G  
Single and Dual Output  
DERATING CURVES  
JFCW48S5-3000 Derating Curve  
JFCW48S5-3000 Derating Curve with Heat-Sink  
EFFICIENCY GRAPHS  
JFCW48S5-3000 Efficiency vs. Input Voltage  
JFCW48S5-3000 Efficiency vs. Output Load  
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •  
Fax 603-778-9797  
1/9/2018  
Page 4 of 11  
website: www.wallindustries.com • e-mail: sales@wallindustries.com  
JFCW SERIES  
Up to 15 Watts  
DC/DC Converter  
Rev G  
Single and Dual Output  
MECHANICAL DRAWINGS  
PIN Connection  
PIN  
1
SINGLE  
+Vin  
DUAL  
+Vin  
2
-Vin  
-Vin  
3
Ctrl  
Ctrl  
4
5
6
+Vout  
Trim  
-Vout  
+Vout  
Common  
-Vout  
External Output Trimming  
Output can be externally trimmed by  
using the method shown below  
Product Standard Table  
Option  
Negative Remote ON/OFF  
Positive Remove ON/OFF  
Without ON/OFF Pin  
Suffix  
R
Blank  
D
Without ON/OFF & Trim Pin  
Negative Remote ON/OFF without TRIM pin  
Positive Remote ON/OFF without TRIM pin  
Heatsink  
G
RE  
F
1. All dimensions in inch (mm)  
2. Tolerance: x.xx±0.02 (x.xx±0.5)  
x.xxx±0.01 (x.xx±0.25)  
3. Pin pitch tolerance ±0.01 (0.25)  
HS  
4. Pin dimension tolerance ±0.004 (0.1)  
HEATSINK OPTIONS  
Equip heat-sink for lower temperature and higher reliability of the module. There are two types to choose from.  
1” x 1” Heat-Sink  
Dimensions in inch (mm)  
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •  
Fax 603-778-9797  
1/9/2018  
Page 5 of 11  
website: www.wallindustries.com • e-mail: sales@wallindustries.com  
JFCW SERIES  
Up to 15 Watts  
DC/DC Converter  
Rev G  
Single and Dual Output  
2” x 1” Heat Sink  
Dimensions in inch (mm)  
2” x 1.6” Heat-Sink  
Dimensions in inch (mm)  
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •  
Fax 603-778-9797  
1/9/2018  
Page 6 of 11  
website: www.wallindustries.com • e-mail: sales@wallindustries.com  
JFCW SERIES  
Up to 15 Watts  
DC/DC Converter  
Rev G  
Single and Dual Output  
2” x 2” Heat Sink  
OUTPUT VOLTAGE ADJUSTMENT  
Output Voltage Adjustment  
Output voltage set point adjustment allows the user to increase or decrease the output voltage set point of the module. This is  
accomplished by connecting an external resistor between the TRIM pin and either the +OUTPUT or –OUTPUT pins. With an external  
resistor between the TRIM and –OUTPUT pin, the output voltage set point increases. With an external resistor between the TRIM and  
+OUTPUT pin, the output voltage set point decreases. The external TRIM resistor needs to be at least 1/16W of rated power.  
Trim Up Equation  
Trim Down Equation  
Trim Constants  
Module  
G
H
K
L
JFCWxxS3.3-xxxx  
JFCWxxS5-xxxx  
JFCWxxS12-xxxx  
JFCWxxS15-xxxx  
JFCWxxS24-xxxx  
5110  
5110  
10000  
10000  
56000  
2050  
2050  
5110  
5110  
13000  
0.8  
2.5  
9.5  
12.5  
21.5  
2.5  
2.5  
2.5  
2.5  
2.5  
Output Voltage Adjustment Configurations  
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •  
Fax 603-778-9797  
1/9/2018  
Page 7 of 11  
website: www.wallindustries.com • e-mail: sales@wallindustries.com  
JFCW SERIES  
Up to 15 Watts  
DC/DC Converter  
Rev G  
Single and Dual Output  
Trim Table  
JFCWxxS3.3-xxxx TRIM-UP  
Trim-Up (%)  
Vout (V)  
RU (kΩ)  
1
2
3
4
5
6
7
8
9
10  
3.630  
3.333  
3.366  
3.399  
3.432  
94.730  
3.465  
75.374  
3.498  
62.470  
3.531  
3.564  
3.597  
385.071 191.511 126.990  
53.253 46.963 40.963 36.662  
TRIM-DOWN  
Trim-Down (%)  
Vout (V)  
1
2
3
4
5
6
7
8
9
10  
2.970  
5.228  
3.267  
116.719 54.779  
3.234  
3.201  
34.133  
3.168  
23.810  
3.135  
17.616  
3.102  
13.486  
3.069  
10.537  
3.036  
8.325  
3.003  
6.604  
RD (kΩ)  
JFCWxxS5-xxxx TRIM-UP  
Trim-Up (%)  
Vout (V)  
RU (kΩ)  
1
2
3
4
5
6
7
8
9
10  
5.500  
5.050  
253.450 125.700  
5.100  
5.150  
83.117  
5.200  
61.825  
5.250  
49.050  
5.300  
40.533  
5.350  
5.400  
5.450  
34.450 29.888 26.339 23.500  
TRIM-DOWN  
Trim-Down (%)  
Vout (V)  
1
2
3
4
5
6
7
8
9
10  
4.500  
4.950  
248.340 120.590  
4.900  
4.850  
78.007  
4.800  
56.715  
4.750  
43.940  
4.700  
35.423  
4.650  
4.600  
4.550  
RD (kΩ)  
29.340 24.778 21.229 18.390  
JFCWxxS12-xxxx TRIM-UP  
Trim-Up (%)  
Vout (V)  
RU (kΩ)  
1
2
3
4
5
6
7
8
9
10  
12.120  
203.223 99.057  
12.240  
12.360  
64.334  
12.480  
46.973  
12.600  
36.557  
12.720  
29.612  
12.840 12.960 13.080 13.200  
24.652 20.932 18.038 15.723  
TRIM-DOWN  
Trim-Up (%)  
Vout (V)  
1
2
3
4
5
6
7
8
9
10  
11.880  
11.760  
11.640  
11.520  
11.400  
11.280  
11.160 11.040 10.920 10.800  
RD (kΩ)  
776.557 308.723 248.779 182.807 143.223 116.834 97.985 83.848 72.853 64.057  
JFCWxxS15-xxxx TRIM-UP  
Trim-Up (%)  
Vout (V)  
RU (kΩ)  
1
2
3
4
5
6
7
8
9
10  
15.150  
161.557 78.223  
15.300  
15.450  
50.446  
15.600  
36.557  
15.750  
28.223  
15.900  
22.668  
16.050 16.200 16.350 16.500  
18.700 15.723 13.409 11.557  
TRIM-DOWN  
Trim-Up (%)  
Vout (V)  
1
2
3
4
5
6
7
8
9
10  
14.850  
14.700  
14.550  
14.400  
14.250  
14.000  
13.750 13.500 13.250 13.000  
RD (kΩ)  
818.223 401.557 262.668 193.223 151.557 123.779 103.938 89.057 77.483 68.223  
JFCWxxS24-xxxx TRIM-UP  
Trim-Up (%)  
Vout (V)  
RU (kΩ)  
1
2
3
4
5
6
7
8
9
10  
24.240  
24.480  
24.720  
24.960  
25.200  
13.667  
25.440  
84.222  
25.680 25.920 26.160 26.400  
70.333 59.917 51.815 45.333  
570.333 278.667 181.444 132.833  
Trim-Up (%)  
Vout (V)  
RU (kΩ)  
11  
26.640  
40.030  
12  
26.880  
35.611  
13  
27.120  
31.872  
14  
27.360  
28.667  
15  
27.600  
25.889  
16  
27.840  
23.458  
17  
18  
19  
20  
28.080 28.320 28.560 28.800  
21.314 19.407 17.702 16.167  
TRIM-DOWN  
Trim-Up (%)  
Vout (V)  
1
2
3
4
5
6
7
8
9
10  
21.600  
432.667  
23.760  
4947.667 2439.333  
23.520  
23.280  
1603.222  
23.040  
1185.167  
22.800  
934.333  
22.560  
767.111  
22.320  
647.667  
22.080  
558.083  
21.840  
488.407  
RD (kΩ)  
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •  
Fax 603-778-9797  
1/9/2018  
Page 8 of 11  
website: www.wallindustries.com • e-mail: sales@wallindustries.com  
JFCW SERIES  
Up to 15 Watts  
DC/DC Converter  
Rev G  
Single and Dual Output  
Input Source Impedance  
The power module should be connected to a low impedance input source. Highly inductive source impedance can affect the stability of  
the power module.  
Install CSIM and LSIM to stimulate the impedance of power source. External input capacitors CFILTER serve primarily as energy-storage  
elements, minimizing line voltage variations caused by transient IR drops in conductors from backplane to the DC/DC. The capacitor  
must as close as possible to the input terminals of the power module for lower impedance. For the input reflected-ripple current  
measurement configuration is shown below:  
Input reflected-ripple current measurement setup  
JFCWxxSxx-xxxx  
Component  
LSIM  
CSIM~CFILTER  
Value  
12µH  
10µF  
Voltage  
----  
100V  
Reference  
Inductor  
Nippon chemi-con KY-series  
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •  
Fax 603-778-9797  
1/9/2018  
Page 9 of 11  
website: www.wallindustries.com • e-mail: sales@wallindustries.com  
JFCW SERIES  
Up to 15 Watts  
DC/DC Converter  
Rev G  
Single and Dual Output  
RECOMMENDED FILTERS  
Recommended External Filter for EN55022 Class A  
MODEL  
C1  
C2  
C3  
C4  
6.8µF/50V  
1812 MLCC  
2.2µF/100V  
1812 MLCC  
6.8µF/50V  
1812 MLCC  
2.2µF/100V  
1812 MLCC  
470pF/2kV  
1808 MLCC  
470pF/2kV  
1808 MLCC  
470pF/2kV  
1808 MLCC  
470pF/2kV  
1808 MLCC  
JFCW24xx-xxx  
JFCW48xx-xxx  
Recommended External Filter for EN55022 Class B  
MODEL  
C1  
C2  
C3  
C4  
C5  
L1  
6.8µF/50V  
1812 MLCC  
6.8µF/50V  
470pF/2kV  
470pF/2kV  
325µH  
JFCW24xx-xxxx  
JFCW48xx-xxxx  
N/A  
1812 MLCC 1808 MLCC 1808 MLCC Common Choke PMT-050  
2.2µF/100V 2.2µF/100V 2.2µF/100V 1000pF/2kV 1000pF/2kV  
1812 MLCC 1812 MLCC 1812 MLCC 1808 MLCC 1808 MLCC Common Choke PMT-050  
325µH  
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •  
1/9/2018  
Fax 603-778-9797  
Page 10 of 11  
website: www.wallindustries.com • e-mail: sales@wallindustries.com  
JFCW SERIES  
Up to 15 Watts  
DC/DC Converter  
Rev G  
Single and Dual Output  
MODEL NUMBER SETUP  
R
Suffix  
JFCW  
24  
S
12  
Output Voltage  
-
1300  
Ouptut Current  
Series Name Input Voltage Range Output Quantity  
24: 9~36VDC  
48: 18~75VDC  
S: Single  
D: Double  
3.3: 3.3VDC  
4000: 4000mA  
3000: 3000mA  
Blank: Pos. Remote ON/OFF  
R: Neg. Remote ON/OFF  
5: 5VDC/±5VDC  
12: 12VDC/±12VDC  
15: 15VDC/±15VDC  
24: 24VDC/±24VDC  
1300: 1300mA  
D: Without ON/OFF Pin  
1000: 1000mA  
G: Without ON/OFF & TRIM Pin  
RE: Neg. Remote ON/OFF without TRIM Pin  
625: 625mA/±625mA  
1500: ±1500mA  
F: Pos. Remote ON/OFF without TRIM Pin  
HS: Heatsink  
500: ±625mA  
315: ±315mA  
COMPANY INFORMATION  
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development  
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008  
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.  
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely  
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide  
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your  
future projects.  
Contact Wall Industries for further information:  
Phone:  
(603)778-2300  
Toll Free: (888)597-9255  
Fax:  
(603)778-9797  
E-mail:  
Web:  
sales@wallindustries.com  
www.wallindustries.com  
Address: 37 Industrial Drive  
Exeter, NH 03833  
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •  
Fax 603-778-9797  
1/9/2018  
Page 11 of 11  
website: www.wallindustries.com • e-mail: sales@wallindustries.com  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY