JFCW24S15-30GHC [WALL]
30 Watt DC/DC Power Converter Single and Dual Output;
| 型号： | JFCW24S15-30GHC |
| 厂家： | 
WALL INDUSTRIES,INC. |
| 描述： | 30 Watt DC/DC Power Converter Single and Dual Output |
| 文件： | 总9页 (文件大小：630K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
JFCW30 SERIES
30 Watt
DC/DC Power Converter
Single and Dual Output
Rev C
FEATURES
• High Efficiency up to 92%
• Remote ON/OFF Control
• 30 Watts Maximum Output Power
• 1600VDC I/O Isolation
• 4:1 Wide Input Voltage Ranges • Short Circuit, Over Voltage, Over Load, & Over Temp.
• Six-Sided Continuous Shielding
• Ultra Low Quiescent Current
Protection
• Wide Operating Temperature Range: -40°C to +100°C
• No Minimum Load Requirements • Compliant to RoHS & Reach
• Single and Dual Outputs
• UL60950-1, EN60950-1, & IEC60950-1 Safety Approvals
• Optional Heatsink Available (Suffix “HC”)
Size:
1.00 x 1.00 x 0.39 inches
(25.4 x 25.4 x 9.9 mm)
DESCRIPTION
The JFCW30 series of DC/DC power converters provides 30 Watts of output power in an industry
standard 1.00” x 1.00” x 0.39” package and footprint. This series has single and dual output models
with 4:1 wide input voltage ranges of 9-36VDC and 18-75VDC. Some features include high efficiency
up to 92%, 1600VDC I/O isolation, six-sided shielding, and remote ON/OFF control. These
converters are also protected against short circuit, over load, over voltage, and over temperature
conditions. All models are RoHS compliant and have UL60950-1, EN60950-1, and IEC60950-1
safety approvals. This series is best suited for use in wireless networks, industry control systems,
telecom/datacom, and semiconductor equipment.
Options
• Negative Logic Remote ON/OFF
• Without Trim pin
• Without CTRL Pin
• Heatsink
MODEL SELECTION TABLE
SINGLE OUTPUT MODELS
Input Voltage
Model Number
Output
Voltage
Output Current
Output
No Load
Output
Power
Maximum
Capacitive Load
Efficiency
Range
Min Load
Max Load Ripple & Noise Input Current
JFCW24S33-30
JFCW24S05-30
3.3 VDC
5 VDC
0mA
7A
6A
75mVp-p
75mVp-p
75mVp-p
75mVp-p
75mVp-p
75mVp-p
75mVp-p
75mVp-p
75mVp-p
75mVp-p
10mA
10mA
10mA
10mA
10mA
10mA
10mA
8mA
23.1W
30W
30W
30W
30W
23.1W
30W
30W
30W
30W
88%
89%
89%
89%
90%
88%
90%
90%
91%
92%
10000µF
7200µF
1200µF
1000µF
375µF
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
24 VDC
JFCW24S12-30
12 VDC
15 VDC
24 VDC
3.3 VDC
5 VDC
2.5A
2A
(9 - 36 VDC)
JFCW24S15-30
JFCW24S24-30
JFCW48S33-30
JFCW48S05-30
1.25A
7A
10000µF
7200µF
1200µF
1000µF
375µF
6A
48 VDC
JFCW48S12-30
12 VDC
15 VDC
24 VDC
2.5A
2A
(18 - 75 VDC)
JFCW48S15-30
JFCW48S24-30
8mA
1.25A
8mA
DUAL OUTPUT MODELS
Output Current
Output
Input Voltage
Model Number
Output
Voltage
No Load
Output
Power
Maximum
Capacitive Load
Efficiency
Range
Ripple & Noise Input Current
Min Load
0mA
Max Load
±1.25A
±1.0A
JFCW24D12-30
±12 VDC
±15 VDC
±24 VDC
±12 VDC
±15 VDC
±24 VDC
60mVp-p
60mVp-p
75mVp-p
60mVp-p
60mVp-p
75mVp-p
10mA
10mA
12mA
8mA
30W
30W
30W
30W
30W
30W
89%
91%
91%
91%
92%
92%
±750µF
±500µF
±180µF
±750µF
±500µF
±180µF
24 VDC
JFCW24D15-30
0mA
(9 - 36 VDC)
JFCW24D24-30
JFCW48D12-30
0mA
±0.625A
±1.25A
±1.0A
0mA
48 VDC
JFCW48D15-30
0mA
8mA
(18 - 75 VDC)
JFCW48D24-30
0mA
±0.625A
10mA
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
02/27/2017
Page 1 of 9
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFCW30 SERIES
30 Watt
DC/DC Power Converter
Single and Dual Output
Rev C
SPECIFICATIONS: JFCW30 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT SPECIFICATIONS
TEST CONDITIONS
Min
Typ
Max Unit
24VDC nominal input models
9
18
24
48
36
75
9
Input Voltage Range
Start-Up Voltage
VDC
48VDC nominal input models
24VDC nominal input models
48VDC nominal input models
24VDC nominal input models
48VDC nominal input models
24VDC nominal input models
48VDC nominal input models
Nominal Input and Full Load
No Load
VDC
18
8
16
Shutdown Voltage
VDC
50
100
Input Surge Voltage (1sec, max.)
VDC
Input Reflected Ripple Current
Input Current
30
mAp-p
See Table
Input Filter
Pi type
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Voltage Accuracy
-1.0
-0.2
-0.5
-0.2
-1.0
-0.1
-0.8
-5.0
-10
+1.0
%
%
Single Output Models
Dual Output Models
Single Output Models
Dual Output Models
Single Output Models
Dual Output Models
+0.2
+0.5
+0.2
+1.0
+0.1
+0.8
+5.0
+20
Line Regulation
Load Regulation
Low line to high line at full load
No load to full load
%
10% load to 90% load
%
%
%
Cross Regulation
Asymmetrical load 25% / 100% FL, Dual Outputs
Single Output Models
15V & 24V Output Models
Others
Voltage Adjustability (See Note 1)
-10
+10
Output Power
See Table
Output Current
See Table
Minimum Load
0
%
Maximum Capacitive Load
Minimum input and constant resistive load
With 22µF/25V X7R 1812 MLCC
With two 22µF/25V X7R 1812 MLCC
With two 6.8µF/50V X7R 1812 MLCC
See Table
75
75
3.3V & 5V Output Models
12V & 15V Output Models
24V Output Models
Ripple & Noise (20MHz BW)
mVp-p
75
With 10µF/25V X7R 1812 MLCC for each output ±12V & ±15V Output Models
With 6.8µF/50V X7R 1812 MLCC for each output ±24V Output Models
60
75
Transient Response Recovery Time 25% load step change
250
µs
ms
Power Up
Remote ON/OFF
30
30
Start-Up Time
Constant resistive load
Temperature Coefficient
PROTECTION
-0.02
+0.02
%/°C
Short Circuit Protection
Over Load Protection
Continuous, automatic recovery
% of rated full load at nominal input
Zener diode clamp
170
%
VDC
°C
3.3V Output Models
5V Output Models
12V Output Models
15V Output Models
24V Output Models
3.7
5.6
13.5
18.3
29.1
5.4
7.0
19.6
22.0
32.5
Over Voltage Protection
Over Temperature Protection
GENERAL SPECIFICATIONS
Efficiency
+115
Nominal input voltage and full load
3.3V & 5V Output Models
Others
See Table
248
297
1600
1000
1000
1
275
330
303
363
Switching Frequency
kHz
Input to Output
Input to Case
Output to Case
Isolation Voltage
1 minute
500VDC
VDC
Isolation Resistance
Isolation Capacitance
GΩ
1500
pF
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
02/27/2017
Page 2 of 9
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFCW30 SERIES
30 Watt
DC/DC Power Converter
Single and Dual Output
Rev C
SPECIFICATIONS: JFCW30 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
REMOTE ON/OFF (See Note 4)
TEST CONDITIONS
Min
Typ
Max
Unit
DC/DC ON
DC/DC OFF
DC/DC ON
DC/DC OFF
Open or 3 ~ 15 VDC
Short or 0 ~ 1.2 VDC
Short or 0 ~ 1.2 VDC
Open or 3 ~ 15 VDC
1.0
Positive Logic (standard)
Negative Logic (optional)
Referenced to –Input pin
Referenced to –Input pin
Input Current of Remote Control Pin Nominal Vin
-0.5
mA
mA
Remote OFF State Input Current
Nominal Vin
2.0
ENVIRONMENTAL SPECIFICATIONS
Without derating
With derating
-40
+50
+100
+105
Operating Ambient Temperature
Vertical direction by natural convection (20LFM)
Natural Convection (20LFM)
°C
+50
Maximum Case Temperature
Storage Temperature
°C
°C
-55
5
+125
Without Heatsink
With Heatsink
15.0
13.8
95
Thermal Impedance (See Note 6)
°C/W
Relative Humidity
Thermal Shock
Vibration
% RH
MIL-STD-810F
MIL-STD-810F
1,259,000 Hours
MTBF
MIL-HDBK0217F, Full Load
PHYSICAL SPECIFICATIONS
Weight
0.58oz (16.5g)
Dimensions (L x W x H)
Case Material
Base Material
1.00x1.00x0.39 inch (25.4x25.4x9.9 mm)
Copper
FR4 PCB
Potting Material
Silicon (UL94-V0)
Shielding
Six-sided
SAFETY & EMC CHARACTERISTICS
Safety Approvals
UL: E193009
CB: UL (Demko)
Class A, Class B
IEC60950-1, UL60950-1, EN60950-1
EMI (See Note 2)
EN55022
ESD
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
Air ±8kV, Contact ±6kV
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Radiated Immunity
Fast Transient (See Note 3)
Surge (See Note 3)
Conducted Immunity
Power Frequency Magnetic Field
10 V/m
±2kV
±2kV
10 Vrms
100A/m continuous; 1000A/m 1 second
NOTES
1.Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an
external resistor between the TRIM pin and either the +Vout pin or the –Vout pin.
2.The JFCW30 series can only meet EMI Class A or Class B with external components added. See page 5 for more details.
3.An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.
-For 24VDC nominal input models we recommend connecting an aluminum electrolytic capacitor (Nippon chemi-con KY series,
220µF/100V) and a TVS (SMDJ58A, 58V, 3000 Watt peak pulse power) diode in parallel.
- For 48VDC nominal input models we recommend an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V).
4.Both positive logic and negative logic remote ON/OFF control is available. Positive logic remote ON/OFF comes standard; for negative
logic remote ON/OFF add the suffix “R” to the model number (Ex: JFCW24S05-30R).
5.There are several different options available for this series. Please see the “Model Number Setup” on page 5 for all options and ordering
information.
6.Optional heatsink is available. Please call factory for more information.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
Due to advances in technology, specifications subject to change without notice.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
02/27/2017
Fax 603-778-9797
Page 3 of 9
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFCW30 SERIES
30 Watt
DC/DC Power Converter
Single and Dual Output
Rev C
DERATING CURVES
JFCW48S05-30 Derating Curve
JFCW48S05-30 Derating Curve with Heatsink
EFFICIENCY CURVES
JFCW48S05-30 Efficiency vs Input Voltage
JFCW48S05-30 Efficiency vs Output Load
MECHANICAL DRAWING
PIN CONNECTIONS
PRODUCT OPTIONS
OPTION
Positive Logic
PIN
1
SINGLE
+INPUT
-INPUT
CTRL
DUAL
SUFFIX
+INPUT
-INPUT
None
R
2
Negative Logic
3
CTRL
Without CTRL Pin
D
4
+OUTPUT
TRIM
+OUTPUT
COMMON
-OUTPUT
Without CTRL and TRIM Pins
Positive Logic without TRIM Pin
Negative Logic without TRIM Pin
Heatsink
G
5
F
6
-OUTPUT
RF
HC
Heat Sink with Clamps (“-HC” Suffix)
NOTES
1. Unit: inches (mm)
2. Tolerance: X.XX±0.02 (X.X±0.5)
X.XXX±0.01 (X.XX±0.25)
3. Pin Pitch Tolerance: ±0.01 (±0.25)
Pin Dimension Tolerance: ±0.004
(±0.1)
4.
5. All dimensions are for reference only
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
02/27/2017
Page 4 of 9
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFCW30 SERIES
30 Watt
DC/DC Power Converter
Single and Dual Output
Rev C
RECOMMENDED PAD LAYOUT
Standard
Heat Sink Option
Notes: All dimensions in inch [mm]
Pad Size (lead free recommended
Through Hole 1.2.3.4.5.6: Φ0.051 [Φ1.30]
Top View Pad 1.2.3.4.5.6: Φ0.064 [Φ1.63]
Bottom View Pad 1.2.3.4.5.6: Φ0.102 [2.60]
EMI CONSIDERATIONS
Recommended Filter for EN55022 Class A Compliance
Recommended Filter for EN55022 Class B Compliance
Model
C1
L1
Model
C1
C2
C3
C4 & C5
L1
2.2µF
SMD Inductor
PMT-097
4.7µF/50V
1812
MLCC
2.2µF
SMD Inductor
PMT-097
4.7µF/50V
1812 MLCC
JFCW24SXX-
30
4.7µF/50V
1812 MLCC 1812 MLCC
4.7µF/50V
1000pF/2kV
1206 MLCC
JFCW24SXX-30
4.7µF/100V
1812
MLCC
10µF
SMD Inductor
PMT-070
10µF
SMD Inductor
PMT-070
JFCW48SXX- 4.7µF/100V 4.7µF/100V
30 1812 MLCC 1812 MLCC
2200pF/2kV
1206 MLCC
4.7µF/100V
1812 MLCC
JFCW48SXX-30
Recommended EN55022 Class A Filter Circuit Layout
Recommended EN55022 Class B Filter Circuit Layout
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
02/27/2017
Page 5 of 9
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFCW30 SERIES
30 Watt
DC/DC Power Converter
Single and Dual Output
Rev C
COMMON MODE CHOKES
PMT-070
PMT-097
Inductance: 10µH±20%
Impedance: 40mΩ
Inductance: 2.2µH±20%
Impedance: 12mΩ
Rated Current: 2.6A
Rated Current: 11A
FUSE CONSIDERATIONS
This power module is not internally fused. An input line fuse must always be used.
This encapsulated power module can be used in a wide variety of applications, ranging from simple stand-alone operations to an
integrated part of sophisticated power architecture.
To maximum flexibility, internal fusing is not included; however to achieve maximum safety and system protection, always use an
input line fuse.
The suggested input line fuse is:
Model
Fuse Rating (A)
Fuse Type
Slow-Blow
Slow-Blow
24VDC Nominal Input Models
48VDC Nominal Input Models
6A
2A
The table is based on information provided in the data sheet on inrush energy and maximum DC input current at low Vin.
THERMAL CONSIDERATIONS
This power module operates in a variety of thermal environments.
However, sufficient cooling should be provided to help ensure reliable operation of the unit.
Heat is removed by conduction, convection, and radiation to the surrounding environment.
Proper cooling can be verified by measuring the point as shown in the figure below.
The temperature at this location should not exceed 105ºC.
When operating, adequate cooling must be provided to maintain the test point temperature at or below 105ºC.
Although the maximum point temperature of the power modules is 105ºF, you can limit this temperature to a lower value for
extremely high reliability.
Thermal test condition with vertical direction by natural convection (20LFM).
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
02/27/2017
Fax 603-778-9797
Page 6 of 9
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFCW30 SERIES
30 Watt
DC/DC Power Converter
Single and Dual Output
Rev C
OUTPUT VOLTAGE ADJUSTMENT
Output voltage set point adjustment allows the user to increase or decrease the output voltage set point of the module. This is
accomplished by connecting an external resistor between the Trim pin and either the +Output or –Output pins.
With external resistor between the Trim and –Output pin, the output voltage set increases.
With an external resistor between the Trim and +Output pin, the output voltage set point decreases.
The external Trim resistor needs to be at least 1/16W of rated power.
Trim Up Equation
Trim Constants
Module
G
H
K
L
JFCWxxS33-30
JFCWxxS05-30
JFCWxxS12-30
JFCWxxS15-30
JFCWxxS24-30
5110
5110
10000
10000
56000
2050
2050
5110
5110
13000
0.8
2.5
9.5
12.5
21.5
2.5
2.5
2.5
2.5
2.5
Trim Down Equation
External Output Trimming
Output can be externally trimmed using the method shown below
Trim Up
3.3VDC Single Output Models
ΔV (%)
Vout (V)
RU (kΩ)
1
2
3
4
5
6
7
8
9
10
3.630
3.333
385.071
3.366
191.511
3.399
3.432
3.465
3.498
3.531
3.564
3.597
126.990 94.730 75.374 62.470 53.253 46.340 40.963 36.662
5VDC Single Output Models
ΔV (%)
Vout (V)
RU (kΩ)
1
2
3
4
5
6
7
8
9
10
5.500
5.050
253.450
5.100
5.150
5.200
5.250
5.300
5.350
5.400
5.450
125.700 83.117 61.825 49.050 40.533 34.450 29.888 26.339 23.500
12VDC Single Outputs Models
ΔV (%)
Vout (V)
RU (kΩ)
1
2
3
4
5
6
7
8
9
10
12.120
203.223
12.240 12.360 12.480 12.600 12.720 12.840 12.960 13.080 13.200
99.057 64.334 46.973 36.557 29.612 24.652 20.932 18.038 15.723
15VDC Single Output Models
ΔV (%)
Vout (V)
RU (kΩ)
1
2
3
4
5
6
7
8
9
10
15.150
161.557
15.300 15.450 15.600 15.750 15.900 16.050 16.200 16.350 16.500
78.223 50.446 36.557 28.223 22.668 18.700 15.723 13.409 11.557
ΔV (%)
Vout (V)
RU (kΩ)
11
16.650
10.042
12
13
14
15
19
17
18
19
20
18.00
3.223
16.800 16.950 17.100 17.250 17.400 17.550 17.700 17.850
8.779
7.711
6.795
6.001
5.307
4.694
4.149
3.662
24VDC Single Output Models
ΔV (%)
1
2
3
4
5
6
7
8
9
10
Vout (V)
24.240
24.480
24.720
24.960
25.200
25.440 25.680 25.920 26.160 26.400
RU (kΩ) 570.333 278.667 181.444 132.833 103.667 84.222 70.333 59.917 51.815 45.333
ΔV (%)
Vout (V)
RU (kΩ)
11
26.640
40.030
12
13
14
15
19
17
18
19
20
26.880 27.120 27.360 27.600 27.840 28.080 28.320 28.560 28.800
35.611 31.872 28.667 25.889 23.458 21.314 19.407 17.702 16.167
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
02/27/2017
Page 7 of 9
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFCW30 SERIES
30 Watt
DC/DC Power Converter
Single and Dual Output
Rev C
Trim Down
3.3VDC Single Output Models
ΔV (%)
Vout (V)
RU (kΩ)
1
2
3
4
5
6
7
8
9
10
2.970
5.228
3.267
116.719
3.234
54.779
3.201
34.133
3.168
3.135
3.102
3.069
3.036
8.325
3.003
6.604
23.810 17.616 13.486 10.537
5VDC Single Output Models
ΔV (%)
Vout (V)
RU (kΩ)
1
2
3
4
5
6
7
8
9
10
4.500
4.950
248.340
4.900
120.590
4.850
78.007
4.800
4.750
4.700
4.650
4.600
4.550
56.715 43.940 35.423 29.340 24.778 21.229 18.390
12VDC Single Output Models
ΔV (%)
1
2
3
4
5
6
7
8
9
10
Vout (V)
11.880
11.760
11.640
11.520
11.400
11.280
11.160 11.040 10.920 10.800
RU (kΩ) 776.557 380.723 248.779 182.807 143.223 116.834 97.985 83.848 72.853 64.057
15VDC Single Output Models
ΔV (%)
1
2
3
4
5
6
7
8
9
10
Vout (V)
14.850
14.700
14.550
14.400
14.250
14.100
13.950
13.800 13.650 13.500
RU (kΩ) 818.223 401.557 262.668 193.223 151.557 123.779 103.938 89.057 77.483 68.223
24VDC Single Output Models
ΔV (%)
Vout (V)
RU (kΩ)
1
2
3
4
5
6
7
8
9
10
21.600
23.760
23.520
23.280
23.040
22.800
22.560
22.320
22.080
21.840
49473667
2439.333
1603.222
1185.167
934.333
767.111
647.667
558.083
488.407
432.667
MODEL NUMBER SETUP
JFCW
24
S
05
- 30
R
H
Series Name Input Voltage
Output Quantity
Ouptut Voltage
Output Power Remote ON/OFF, CTRL, and TRIM Pins
Heatsink
24: 9-36V
S: Single Output 33: 3.3VDC
05: 5VDC
30: 30W
None: Positive Logic
None: No Heatsink
HC: Heatsink
48: 18-75V
R: Negative Logic
12: 12VDC
D: Without CTRL Pin
15: 15VDC
G: Without CTRL and TRIM Pins
F: Positive Logic w/out TRIM Pin
RF: Negative Logic w/out TRIM Pin
24: 24VDC
D: Dual Output
12: ±12VDC
15: ±15VDC
24: ±24VDC
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
02/27/2017
Page 8 of 9
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFCW30 SERIES
30 Watt
DC/DC Power Converter
Single and Dual Output
Rev C
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
(603)778-2300
Toll Free: (888)597-9255
Fax:
(603)778-9797
E-mail:
Web:
sales@wallindustries.com
www.wallindustries.com
Address: 37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
02/27/2017
Page 9 of 9
website: www.wallindustries.com • e-mail: sales@wallindustries.com
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明