JFCW48D05-10FH [WALL]
10 Watt DC/DC Power Converters;
| 型号： | JFCW48D05-10FH |
| 厂家： | 
WALL INDUSTRIES,INC. |
| 描述： | 10 Watt DC/DC Power Converters |
| 文件： | 总5页 (文件大小：583K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
JFCW10 SERIES
10 Watt DC/DC Power Converters
Rev B
FEATURES
• High Efficiency up to 91%
• Built-in EN55022 Class B Filter
• Remote On/Off Control
• 10 Watts Maximum Output Power
• 4:1 Ultra Wide Input Voltage Ranges
• Six-Sided Continuous Shielding
• Ultra Low Quiescent Current
• No Minimum Load Requirements
• Single and Dual Outputs
• Short Circuit, Over Voltage, Over Load, & Under-Voltage Protection
• Wide Operating Temperature Range: -40°C to +85°C
• Compliant to RoHS EU Directive 2011/65/EU
• UL60950-1, EN60950-1, & IEC60950-1 Safety Approvals
• CE Mark meets 2006/95/EC, 2011/95/EC, and 2004/108/EC
• Optional Heatsink Available (Suffix “HC”)
• Fixed Switching Frequency
Size:
DESCRIPTION
1.00 x 1.00 x 0.39 inches
The JFCW10 series of DC/DC power converters provides 10 Watts of output power in an industry standard 1.00” x
1.00” x 0.39” package and footprint. This series has single and dual output models with 4:1 ultra wide input voltage
ranges of 9-36VDC and 18-75VDC. Some features include high efficiency up to 91%, 1600VDC I/O isolation, six-sided
shielding, and remote on/off control. These converters are also protected against short circuit, over voltage, over
load, and under-voltage. All models are RoHS compliant and have UL60950-1, EN60950-1, and IEC60950-1 safety
approvals. This series is best suited for use in wireless networks, telecom/datacom, industry control systems,
measurement equipment, and semiconductor equipment.
(25.4 x 25.4 x 9.9 mm)
Options:
• Negative Logic Remote ON/OFF
• Without Trim pin
• Without CTRL Pin
• Heatsink
MODEL SELECTION TABLE
SINGLE OUTPUT MODELS
Output Current
Output
Voltage
3.3 VDC
5 VDC
12 VDC
15 VDC
24 VDC
3.3 VDC
5 VDC
Output
No Load
Output
Power
9.9W
10W
10W
10W
10W
9.9W
10W
10W
10W
10W
Maximum
Capacitive Load
3500µF
2500µF
430µF
Model Number Input Voltage Range
JFCW24S33-10
Efficiency
Ripple & Noise Input Current
Min Load
Max Load
3000mA
2000mA
830mA
670mA
416mA
3000mA
2000mA
830mA
670mA
416mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
40mVp-p
40mVp-p
60mVp-p
60mVp-p
60mVp-p
40mVp-p
40mVp-p
60mVp-p
60mVp-p
60mVp-p
6mA
6mA
6mA
6mA
6mA
4mA
4mA
4mA
4mA
4mA
85%
87%
90%
91%
90%
85%
87%
90%
90%
90%
JFCW24S05-10
JFCW24S12-10
JFCW24S15-10
24 VDC
(9 – 36 VDC)
350µF
125µF
3500µF
2500µF
430µF
JFCW24S24-10
JFCW48S33-10
JFCW48S05-10
JFCW48S12-10
JFCW48S15-10
48 VDC
12 VDC
15 VDC
24 VDC
(18 – 75 VDC)
350µF
125µF
JFCW48S24-10
DUAL OUTPUT MODELS
Output Current
Output
Voltage
±5 VDC
±12 VDC
±15 VDC
±5 VDC
Output
No Load
Output
Power
10W
10W
10W
10W
10W
10W
Maximum
Capacitive Load
±1440µF
±250µF
Model Number Input Voltage Range
Efficiency
Ripple & Noise Input Current
Min Load
0mA
Max Load
±1000mA
±416mA
±333mA
±1000mA
±416mA
±333mA
JFCW24D05-10
24 VDC
40mVp-p
60mVp-p
60mVp-p
40mVp-p
60mVp-p
60mVp-p
6mA
6mA
6mA
4mA
4mA
4mA
87%
89%
89%
87%
89%
89%
JFCW24D12-10
JFCW24D15-10
0mA
0mA
0mA
0mA
(9 – 36 VDC)
±180µF
±1440µF
±250µF
JFCW48D05-10
JFCW48D12-10
JFCW48D15-10
48 VDC
±12 VDC
±15 VDC
(18 – 75 VDC)
0mA
±180µF
NOTES
1. Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external resistor
between the Trim pin and either the +Vout pin or the –Vout pin.
2. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor suggested is Nippon chemi-con KY
series, 220µF/100V.
3. The JFCW10 series standard modules meet EN55022 Class A without external components and meets Class B with external components. See page 4 for more
details.
4. Both positive logic and negative logic remote on/off control is available. Positive logic remote on/off comes standard; for negative logic remote on/off add
the suffix “R” to the model number (Ex: JFCW24S05-10R).
5. There are several different options available for this series. Please see the “Model Number Setup” on page 5 for all options and ordering information.
6. Optional heatsink is available. Please call factory for more information.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
*Due to advances in technology, specifications subject to change without notice.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
10/31/2014
Page 1 of 5
website: www.wallindustries.com • e-mail: sales@wallindustries.com
JFCW10 SERIES
10 Watt DC/DC Power Converters
Rev B
TECHNICAL SPECIFICATIONS: JFCW10 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT SPECIFICATIONS
TEST CONDITIONS
Min
Typ
Max
Unit
24VDC nominal input models
48VDC nominal input models
24VDC nominal input models
48VDC nominal input models
24VDC nominal input models
48VDC nominal input models
24VDC nominal input models
48VDC nominal input models
9
18
24
48
36
75
9
Input Voltage Range
Start-Up Voltage
VDC
VDC
VDC
18
8
16
Shutdown Voltage
50
100
Input Surge Voltage (1sec, max.)
VDC
Input Reflected Ripple Current
Input Current
30
See Table
mAp-p
No Load
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
See Table
+1.0
-1.0
-0.2
-0.5
-0.2
-1.0
-0.1
-0.8
-5.0
-10
%
%
Single Output Models
Dual Output Models
Single Output Models
Dual Output Models
Single Output Models
Dual Output Models
+0.2
+0.5
+0.2
+1.0
+0.1
+0.8
+5.0
+10
+20
10
Line Regulation
Load Regulation
Low line to high line at full load
No load to full load
%
10% load to 90% load
%
%
%
Cross Regulation (Dual Output Models) Asymmetrical load 25% / 100% FL
3.3V & 12V Output Models
Others
Voltage Adjustability (See Note 1)
Single Output Models
-10
Rated
Output Power
With Trim up 10%
With Trim up 20%
11
12
See Table
W
%
Output Current
Minimum Load
0
Maximum Capacitive Load
Minimum input and constant resistive load
With 10µF/25V X7R 1206 MLCC
With 10µF/25V X7R 1206 MLCC
With 1µF/50V X7R 1206 MLCC
See Table
40
60
60
3.3V & 5V Output Models
12V & 15V Output Models
24V Output Models
Ripple & Noise (20MHz BW)
mVp-p
With 10µF/25V X7R 1206 MLCC for each output ±5V Output Models
With 10µF/25V X7R 1206 MLCC for each output ±12V & ±15V Output Models
25% load step change
Power Up
Nom. input and constant resistive load
Remote ON/OFF
40
60
250
Transient Response Recovery Time
Start-Up Time
µs
ms
30
30
Temperature Coefficient
PROTECTION
-0.02
+0.02
%/°C
Short Circuit Protection
Over Load Protection
continuous, automatic recovery
% of rated full load at nominal input
3.3V Output Models
150
5.4
7.4
%
3.7
6.3
5V Output Models
Over Voltage Protection
Zener diode clamp
12V Output Models
15V Output Models
24V Output Models
13.5
18.3
29.1
19.6
22.0
32.5
VDC
GENERAL SPECIFICATIONS
Efficiency
Switching Frequency
Nominal input voltage and full load
3.3V & 5V Output Models
See Table
297
1600
1000
1000
1
330
363
kHz
Input to Output
Input to Case
Output to Case
Isolation Voltage
1 minute
500VDC
VDC
Isolation Resistance
Isolation Capacitance
GΩ
pF
1500
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
10/31/2014
Page 2 of 5
JFCW10 SERIES
10 Watt DC/DC Power Converters
Rev B
TECHNICAL SPECIFICATIONS: JFCW10 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
REMOTE ON/OFF (See Note 4)
TEST CONDITIONS
Min
Typ
Max
Unit
DC/DC ON
Open or 3V < Vr < 15 VDC
Short or 0V < Vr < 1.2 VDC
Short or 0V <Vr < 1.2 VDC
Open or 3V < Vr < 15 VDC
1.0
Positive Logic (standard)
Negative Logic (optional)
The CTRL pin is referenced to –Input pin
The CTRL pin is referenced to –Input pin
DC/DC OFF
DC/DC ON
DC/DC OFF
Input Current of Remote Control Pin
Remote OFF State Input Current
ENVIRONMENTAL SPECIFICATIONS
Operating Ambient Temperature
Maximum Case Temperature
Storage Temperature
Nominal Vin
Nominal Vin
-0.5
mA
mA
2.5
With derating
-40
-55
+85
+105
+125
°C
°C
°C
Without Heatsink
With Heatsink
16.18
15.13
Thermal Impedance (See Note 6)
Natural Convection
°C/W
% RH
Relative Humidity
Thermal Shock
Vibration
5
95
MIL-STD-810F
MIL-STD-810F
3,376,000 hours
MTBF
MIL-HDBK-217F Ta=25°C, full load
PHYSICAL SPECIFICATIONS
Weight
0.58oz (16.5g)
Dimensions (L x W x H)
Case Material
Base Material
1.00x1.00x0.39 inch (25.4x25.4x9.9 mm)
Copper
FR4 PCB
Potting Material
Shielding
Silicon (UL94-V0)
Six-sided
SAFETY & EMC CHARACTERISTICS
Safety Approvals
EMI (See Note 3)
UL60950-1, IEC60950-1, EN60950-1
Class A, Class B
EN55022
Air ±8kV
ESD
EN61000-4-2
Perf. Criteria A
Contact ±6kV
10 V/m
±2kV
±1kV
3 Vrms
Radiated Immunity
Fast Transient (See Note 2)
Surge (See Note 2)
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Conducted Immunity
MECHANICAL DRAWING
PIN CONNECTIONS
PRODUCT OPTIONS
PIN
1
SINGLE
+INPUT
-INPUT
CTRL
DUAL
+INPUT
-INPUT
OPTION
SUFFIX
Positive Logic Remote On/Off
Negative Logic Remote On/Off
Without CTRL Pin
None
R
2
3
CTRL
D
4
+OUTPUT
TRIM
+OUTPUT
COMMON
-OUTPUT
Without CTRL and TRIM Pins
Positive Logic without TRIM Pin
Negative Logic without TRIM Pin
Heatsink
G
5
F
6
-OUTPUT
RF
HC
EXTERNAL OUTPUT TRIMMING
Output can be externally trimmed by using the
method shown below
NOTES
1. Unit: inches (mm)
2. Tolerance: X.XX±0.02 (X.X±0.5)
X.XXX±0.01 (X.XX±0.25)
3. Pin Pitch Tolerance: ±0.01 (±0.25)
4. Pin Dimension Tolerance: ±0.004 (±0.1)
5. All dimensions are for reference only
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
10/31/2014
Page 3 of 5
JFCW10 SERIES
10 Watt DC/DC Power Converters
Rev B
DERATING CURVES
JFCW48S05-10 Derating Curve
JFCW48S05-10 Derating Curve with Heatsink
EFFICIENCY CURVES
JFCW48S05-10 Efficiency vs Input Voltage
JFCW48S05-10 Efficiency vs Output Load
EMI CONSIDERATIONS
Recommended External EMI Filter for EN55022 Class B
Single Output
Dual Output
Model
C1
Model
C1
JFCW24SXX-10
JFCW48SXX-10
6.8µF/50V 1812 MLCC
4.7µF/100V 1812 MLCC
JFCW24DXX-10
JFCW48DXX-10
6.8µF/50V 1812 MLCC
4.7µF/100V 1812 MLCC
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
10/31/2014
Page 4 of 5
JFCW10 SERIES
10 Watt DC/DC Power Converters
Rev B
MODEL NUMBER SETUP
JFCW
24
S
05
-
10
R
H
Series Name
Input Voltage
Output Quantity
Ouptut Voltage
Output Power
Remote ON/OFF, CTRL, and TRIM Pins
Heatsink
24: 9-36 VDC
48: 18-75 VDC
S: Single Output
33: 3.3 VDC
05: 5 VDC
10: 10 Watts
None: Positive Logic Remote On/Off
R: Negative Logic Remote On/Off
D: Without CTRL Pin
None: No Heatsink
HC: Heatsink
12: 12 VDC
15: 15 VDC
24: 24 VDC
05: ±5 VDC
12: ±12 VDC
15: ±15 VDC
G: Without CTRL and TRIM Pins
F: Positive Logic without TRIM Pin
RF: Negative Logic without TRIM Pin
D: Dual Output
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution
that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to
producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to
ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and
beyond the design and production phases. Give us a call today to discuss your future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
(603)778-2300
(888)597-9255
(603)778-9797
sales@wallindustries.com
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
Address:
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
10/31/2014
Page 5 of 5
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明