PSRL5017R8-N [WALL]
Up to 800 Watts Single Output with Active PFC AC/DC Switching Power Supply; 高达800瓦单路输出带主动式PFC的AC / DC开关电源
| 型号： | PSRL5017R8-N |
| 厂家： | 
WALL INDUSTRIES,INC. |
| 描述： | Up to 800 Watts Single Output with Active PFC AC/DC Switching Power Supply |
| 文件： | 总4页 (文件大小：417K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PSRL5017R8-N Series
Up to 800 Watts
Single Output with Active PFC
FEATURES
● 2 Year Warranty
● Optional Top Cover Available
● Universal AC Input / Full Range
● Optional N+1 Active Current Sharing
● Peak Power 900W within 500uS duty duration
● Power Factor Corrected to EN61000-3-2 Class D
● High Power Density (Max. 9.1 Watts per cubic inch)
● Approved to UL/CUL/TUV/CB/CE & Class B Emissions
U Type
E Type
● U-Chassis & Enclosed with Built-in Fan Mechanical Options
F Type
SPECIFICATIONS: PSRL5017R8-N Series
All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage
90 - 264 VAC Full Range
Input Current
Input Frequency
Inrush Current
12A at 90VAC and full load.
47 to 63Hz
70A max. @ 230VAC with full load cold start.
3.5mA max. @ 240VAC.
Designated as RSW on CN3, requires a low signal to inhibit output.
Leakage Current
Remote ON/OFF
OUTPUT SPECIFICATIONS
Output Voltage
Output Power Range
Output Adjustability
Total Regulation
Output Current
See Table
800 Watts max with airflow. (See Note 3)
Output user adjustable ±5% minimum.
±1%
See Table
Ripple & Noise (peak to peak)
Transient Response
Hold-Up Time
±1%
Returns to within 1% in less than 2.5ms for a 50% load change and the peak transient does not excess 5%.
20ms min. at 80% of full load.
Turn-On & Off overshoot < 5% over nominal voltage.
Overshoot
Turn On Delay
1.5 seconds maximum at 230VAC.
Designated as RS+ and RS- on CN3, total voltage compensation for cable losses with respect to the main
Remote Sense
output. (Not available for current sharing models).
PROTECTION
Over Voltage Protection
Short Circuit Protection
Over-Temperature Protection
Over-Power Protection
Input Voltage Protection
Input Fusing Protection
GENERAL SPECIFICATIONS
Efficiency
Unit latching down when output voltage exceeds 130% and recycle AC input to reset.
Trip without damage and auto-recovery.
Unit protected of excessive operating ambient 85°C and automatic recovery.
Fold back mode 110-140% and auto-recovery.
Power shut down under 80 ±5VAC, and recovered over 86VAC
A T12A/250V fuse is inserted in primary.
80% for 12V, and 83% minimum for other outputs @ 230VAC and full load.
1500 VAC input line to chassis (10mA DC cut off current); 3000VAC between primary and secondary
windings. Primary to core 1500VAC. All for 3 seconds.
Withstand Voltage
Burn In
PFC
45 ±5°C for one hour @ 230VAC with full load.
Active power factor correction meets EN61000-3-2 class D.
Designated as PG on the CN3 and TTL high 100-500ms after regulation. It goes low at least 1ms before loss
Power Good
of regulation for Power on Reset signal.
Grounding Test
Apply 25A from ground pin of the three prong plug to the far most earth. Max allowable resistance is 0.1 ohm.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSRL5017R8-N Series
Up to 800 Watts
Single Output with Active PFC
SPECIFICATIONS (CONTINUED)
GENERAL SPECIFICATIONS (CONTINUED)
Designated as CSH on the CN3, optional single wired for forced current sharing function and parallel up to 4
units within 10% accuracy at full load.
Current Sharing
Current Monitor
LED Display
Designated as CMN on the CN3 is a 0.5V to 3VDC output voltage to represent 0% to 100% output current.
Bi-color LED1 emit Green for Power On and emit Orange when protection is enabled or RSW is applied a low
signal.
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Operating Humidity
0°C to +70°C ambient, de-rating at 2.5% per degree from 50°C to 70°C.
-20°C to +85°C
5% to 90% RH, non-condensing
5% to 95% RH, non-condensing
Storage Humidity
Vibration
5 ~ 50Hz, acceleration 7.35 m/(s x s) on X, Y, and Z axis.
U Type (U-Chassis): 25CFM to achieve maximum power
Cooling
E & F Type (Enclosed with built-in fan): Self cooled by built-in fan.
MTBF
150,000 hours (according to MIL-HBK-217F) at 30°C.
PHYSICAL SPECIFICATIONS
U Type (U-Chassis): 1350 grams
Weight
E & F Type (Enclosed with built-in fan): 1450 grams
U Type (U-Chassis): 8(L) x 4.33(W) x 2.5(H) inches.
E Type (Enclosed with built-in fan): 9.17(L) x 4.25(W) x 2.5(H) inches.
F Type (Enclosed with top built-in fan): 8(L) x 4.33(W) X 3.4(H) inches.
Dimensions
Warranty
SAFETY
Emissions
2 years
FCC part15, CISPR 22 Class B, Conducted.
Approved to UL60950-1, CSA C22.2 No. 60950-1-03, TUV EN60950-1, CE Mark (LVD) EN61000-3-2,3, and
IEC61000-4 Series Regulations and CB.
Safety Regulations
OUTPUT VOLTAGE / CURRENT RATING CHART
Output Voltage
Range
Preset
Output
Model
Regulation Ripple & Noise Output Power
Voltage
Current
12 – 14 VDC
15 – 19 VDC
20 – 26 VDC
27 – 36 VDC
37 – 47 VDC
48 – 60 VDC
12 VDC
15 VDC
24 VDC
36 VDC
40 VDC
48 VDC
62.5A
50A
40A
29.63A
21.62A
16.67A
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
750W
750W
800W
800W
800W
800W
PSRL5017Rx8-12N(I)
PSRL5017Rx8-15N(I)
PSRL5017Rx8-24N(I)
PSRL5017Rx8-36N(I)
PSRL5017Rx8-40N(I)
PSRL5017Rx8-48N(I)
NOTES
1. PSRL5017R8-N Series is designated as PSRL5017Rxw-yz where x can be E (enclosed with end side built-in fan), U (U-Chassis with
optional cover), or F (enclosed with top built-in fan), w = 8 for output power from 750W to 800W, y can be 12N, 15N, 24N, 36N, 40N, or
48N for output voltage, and z can be blank or I where I denote forced current sharing option (output with internal OR-ring diode). See
PSRL5017R-NI Series for forced current sharing.
2. All output ranges are covered in agency certifications and preset voltage will be set as standard models. If any request is not preset
output, then please contact us in advance.
3. U-Chassis type needs external forced airflow min. 25CFM to achieve maximum power.
4. Ripple & noise are measured from 10KHZ to 20MHz bandwidth at output with parallel 0.1uF ceramic and 22uF electrolytic capacitors.
5. Providing peak power to 900W within 500uS for all models, longer duty duration need contact manufacturer.
6. 1% minimum load is required to maintain the ripple and regulation.
7. Cover is optional for U-Chassis Type. Please call factory for ordering details.
8. Output is fully isolated.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSRL5017R8-N Series
Up to 800 Watts
Single Output with Active PFC
MECHANICAL DRAWINGS
PSRL5017RU8-N Series (U-Chassis Type): 8(L) x 4.33(W) x 2.5(H) inches; Weight: 1350g; Option: Top Cover.
PSRL5017RE8-N Series (Enclosed with Built-in Fan Type): 9.17(L) x 4.25(W) x 2.5(H) inches; Weight: 1450g.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSRL5017R8-N Series
Up to 800 Watts
Single Output with Active PFC
PSRL5017RF8-N Series (Enclosed with Top Built-in Fan Type): 8(L) x 4.33(W) x 3.4(H) inches; Weight: 1450g.
OUTPUT PIN CONNECTION
Howder
Molex
Vo+
Vo-
Pins 1 – 4
Pins 1 – 10
Pins 5 – 8 Pins 11 – 20
I/O CONNECTOR PIN ASSIGNMENT
AC Input Connector (CN1):
E Type: IEC320 or equivalent Snap-in mounting type or DINKLE Terminal block Part No. DT-35-A02W-03 (3 pin).
U & F Type: Mating Molex Part No. 09-91-0700 or equivalent (7 pin. 5 used) or Howder Terminal block Part No. HD-121-3P.
Output Connector (CN2):
Mating Molex Part No. 09-91-2000 (20 pin) or Howder Terminal block Part No. HD-121-8P (8 pin).
Output Pin Assignment:
Optional two type - Molex: VO+ (Pins 1-10 ), VO- (Pins 11-20) ; Howder: VO+ (Pins 1-4 ), VO- (Pins 5-8).
Logic signal connectors (CN3):
Mating JST XHP-7 or equivalent (CHYAO SHIUNN JS-2001-07).
Fan Drive:
12VDC/400mA Mating JST XHP-2 or equivalent (CHYAO SHIUNN JS-2001-02).
Mounting Inserts:
6-32, M4 4 Places individually with maximum penetration 0.2 inch on bottom side and 0.25 inch on both sides.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
相关型号：
PSRL5017R8-NI
Up to 800 Watts Single Output with Active PFC Forced Current Sharing Series AC/DC Switching Power Supply
WALL
PSRL5017RU3-03I
Up to 300 Watts Single Output with Active PFC Forced Current Sharing Series AC/DC Switching Power Supply
WALL
PSRL5017RU3-05I
Up to 300 Watts Single Output with Active PFC Forced Current Sharing Series AC/DC Switching Power Supply
WALL
PSRL5017RU3-12I
Up to 300 Watts Single Output with Active PFC Forced Current Sharing Series AC/DC Switching Power Supply
WALL
PSRL5017RU3-16I
Up to 300 Watts Single Output with Active PFC Forced Current Sharing Series AC/DC Switching Power Supply
WALL
©2020 ICPDF网 联系我们和版权申明