AMDIP1606L16T [WALSIN]
Low Insertion Loss;型号: | AMDIP1606L16T |
厂家: | Walsin Technology |
描述: | Low Insertion Loss |
文件: | 总6页 (文件大小:559K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Approval sheet
AMDIP Series – 1608(0603)- RoHS Compliance
MULTILAYER CERAMIC DIPLEXER
Halogens Free Product
2.4 GHz & 5 GHz ISM Band RF Application
Automotive
Qualified to AEC-Q200
Preliminary
P/N: AMDIP1606L16T
*Contents in this sheet are subject to change without prior notice.
Page 1 of 6
ASC_AMDIP1606L16T_V01
Dec. 2017
Approval sheet
FEATURES
1.
2.
3.
4.
Miniature footprint: 1.6 X 0.8X 0.7 mm3
Low Insertion Loss
High attenuation on 2nd harmonic suppressed
LTCC process
APPLICATIONS
1.
2.
ISM 2.4/ 5GHz band RF application
Wi-Fi 802.11a/b/g/n application
CONSTRUCTION
Top view
P3
P2
P1
PIN
1
Connection
GND
PIN
4
Connection
High Band
GND
2
Common
GND
5
3
Low Band
6
P4
P5
P6
DIMENSIONS
Figure
Symbol
Dimension (mm)
L
W
T
1.60 ± 0.15
0.80 ± 0.15
0.70 max.
A
B
C
D
L
0.175 ± 0.15
0.25 ± 0.15
0.25 ± 0.15
0.50 ± 0.15
1.60 ± 0.15
Bottom view
Top view
Side view
Page 2 of 6
ASC_AMDIP1606L16T_V01
Dec. 2017
Approval sheet
ELECTRICAL CHARACTERISTICS
AMDIP16060L16T
Specification
Frequency range
2400~2500 MHz
4900~5950 MHz
0.55 dB max. at 25℃
0.80 dB max. at 25℃
Insertion Loss
Attenuation
Isolation
0.85 dB max. at -55℃~ +125℃
1.10 dB max. at -55℃~ +125℃
32 dB min. @ 30~2700MHz
15 dB min. @ 9800~11900 MHz
11 dB min. @ 14700~17850 MHz
26 dB min. @ 4800~5000MHz
24 dB min. @ 7200~7500 MHz
32 dB min. @ 30~2700 MHz
26 dB min. @ 4900~5950 MHz
VSWR
1.8 max.
Impedance
50Ω
Moisture sensitivity levels
MSL is LEVEL 1 (Refer to : IPC/JEDEC J-STD-020)
Operating & Storage Condition (Component)
Operation Temperature Range: -55C ~ +125C
Storage Temperature Range: -55C ~ +125C
Storage Condition before Soldering (Included packaging material)
Storage Temperature Range: +5 ~ +40 ℃
Humidity: 30 to 70% relative humidity
Typical Electrical Chart
SOLDER LAND PATTERN
Figure
Unit: mm
Line width to be designed to match 50 Ω characteristic impedance, depending on PCB material and thickness.
Page 3 of 6
ASC_AMDIP1606L16T_V01
Dec. 2017
Approval sheet
RELIABILITY TEST
TEST
PROCEDURE / TEST METHOD
REQUIREMENT
Resistance to soldering heat
(R.S.H)
MIL-STD-202
Un-mounted chips completely immersed No mechanical damage.
for 10±1second in a SAC solder bath at
270℃±5ºC
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
method 210
Loss of metallization on the edges of each
electrode shall not exceed 25
Solderability
J-STD-002
95% coverage min., good tinning and no
visible damage
a)4hrs / 155℃*dry then solder dipping 235
℃/5sec
b)Steam 8 hrs then 215℃ / 5sec solder
dipping
c)Steam 8 hrs then 260℃ / 7sec solder
dipping
Temperature cycling
JESD22
method JA-104
No mechanical damage.
1000 cycles, -55℃ ~ +125℃, dwell time
30min
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
Humidity
MIL-STD-202
method 103
No mechanical damage.
1000+48/-0 hours; 85C, 85% RH
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
High Temperature Exposure
MIL-STD-202
method 108
1000+48/-0 hours; without load in a
No mechanical damage.
temperature chamber controlled 125±3°C Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
Mechanical Shock
MIL-STD-202
method 213
1/2 Sine Pulse / 100g Peak / Velocity
12.3ft/sec
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
Board Flex
RF component mounted on a 90mm glass No mechanical damage.
epoxy resin PCB(FR4), bending once
2mm for 60sec
Electrical specification shall satisfy the
AEC-Q200-005
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
Terminal strength
AEC-Q200-006
Pressurizing force: 1.8Kg, Test time:
60±1sec.
No remarkable damage or removal of the
terminations
Only 0402 for 1.0kg/60sec
Vibration
MIL-STD-202
method 204
Test 5g’s for 20min., 12 cycles each of 3 No mechanical damage.
orientations Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
ESD
AEC-Q200-002
Test contact 1.0KV ( 0.5KV for 1005 only) No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
Page 4 of 6
ASC_AMDIP1606L16T_V01
Dec. 2017
Approval sheet
SOLDERING CONDITION
Typical examples of soldering processes that provide reliable joints without any damage are given in Fig 2,
Fig 2. Infrared soldering profile
ORDERING CODE
AM
Walsin
DIP
1606
L
16
T
Product Code
DIP : Diplexer
Dimension code
Application
L :2.4GHz/5GHz
Specification
Design code
Packing
T : Reeled
Automotive
device
Per 2 digits of Length, Width,
Thickness :
e.g. :
1606 =
Length 16, Width 08,
Thickness 06
Minimum Ordering Quantity: 4000 pcs per reel.
PACKAGING
Paper Tape specifications (unit :mm)
Index
Ao
Bo
T
W
D
Dimension (mm)
Index
1.55 + 0.05
Po
0.975 0.10
E
1.76 0.10
F
0.75 0.10
8.0 0.10
P2
P1
Dimension (mm)
1.75 0.10
3.50 0.05
4.00 0.10
4.00 0.10
2.00 0.05
Page 5 of 6
ASC_AMDIP1606L16T_V01
Dec. 2017
Approval sheet
Reel dimensions
B
A
C
Index
A
B
C
Φ178.0
Φ60.0
Φ13.0
Dimension (mm)
Taping Quantity:4000 pieces per 7” reel
CAUTION OF HANDLING
Limitation of Applications
Please contact us before using our products for the applications listed below which require especially high reliability for
the prevention of defects, which might directly cause damage to the third party’s life, body or property.
(1) Aircraft equipment
(2) Aerospace equipment
(3) Undersea equipment
(4) Medical equipment
(5) Disaster prevention / crime prevention equipment
(6) Traffic signal equipment
(7) Transportation equipment (vehicles, trains, ships, etc.)
(8) Applications of similar complexity and /or reliability requirements to the applications listed in the above.
Storage condition
(1) Products should be used in 6 months from the day of WALSIN outgoing inspection.
(2) Storage environment condition.
Products should be storage in the warehouse on the following conditions.
Temperature
Humidity
: +5 to +40℃
: 30 to 70% relative humidity
Don’t keep products in corrosive gases such as sulfur. Chlorine gas or acid or it may cause oxidization of
electrode, resulting in poor solderability.
Products should be storage on the palette for the prevention of the influence from humidity, dust and son on.
Products should be storage in the warehouse without heat shock, vibration, direct sunlight and so on.
Products should be storage under the airtight packaged condition.
Page 6 of 6
ASC_AMDIP1606L16T_V01
Dec. 2017
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明