RFBPF2009A12T [WALSIN]

ISM 2.4GHz Band RF Application;


型号：	RFBPF2009A12T
厂家：	Walsin Technology
描述：	ISM 2.4GHz Band RF Application ISM频段
文件：	总7页 (文件大小：579K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Approval sheet

RFBPF Series – 2012(0805)- RoHS Compliance

MULTILAYER CERAMIC BAND PASS FILTER

Halogens Free Product

ISM 2.4GHz Band RF Application

P/N: RFBPF2009A12T

*Contents in this sheet are subject to change without prior notice.

Page 1 of 7

ASC_RFBPF2009A12T_V01

Nov. 2015

Approval sheet

FEATURES

Miniature footprint: 2.0 X 1.2 X 0.9 mm³

Ultra Low Insertion Loss

Special Pin definition

LTCC process

APPLICATIONS

2.4GHz working frequency

Bluetooth , Wireless LAN 802.11b/g/ n, HomeRF

CONSTRUCTION

Top View

Connection

Input Port

GND

Output Port

GND

DIMENSIONS

Figure

Symbol

Dimension (mm)

2.00 ± 0.15

1.25 ± 0.15

0.90 ± 0.10

0.15 ± 0.10

0.40 ± 0.10

0.30 ± 0.10

0.15 ± 0.10

0.95 ± 0.10

0.30 ± 0.10

0.35 ± 0.10

Top view

Side view

Bottom view

Page 2 of 7

ASC_RFBPF2009A12T_V01

Nov. 2015

Approval sheet

ELECTRICAL CHARACTERISTICS

RFBPF2009A12T

Specification

Frequency Range

2450 ± 50 MHz

1.0 dB max. at 25 °C

Insertion Loss

1.2 dB max. at -40 ~ +85 °C

28 dB min. @ 824 ~ 960MHz

28 dB min. @ 1570 ~ 1580MHz

23 dB min. @ 1710 ~ 1910MHz

17 dB min. @ 1920~ 1990MHz

4 dB min. @ 2100~ 2170MHz

25 dB min. @ 4800 ~ 5000MHz

Attenuation

25 dB min. @ 7200 ~ 7500MHz

VSWR

2.0 max

50 Ω

Impedance

Operation Temperature Range

Moisture sensitivity levels

Typical Electrical Chart

-40°C ~ +85°C

MSL is LEVEL 1 (Refer to : IPC/JEDEC J-STD-020)

SOLDER LAND PATTERN

Figure

Unit : mm

Line width to be designed to match 50 Ω characteristic impedance, depending on PCB material and thickness.

Page 3 of 7

ASC_RFBPF2009A12T_V01

Nov. 2015

Approval sheet

RELIABILITY TEST

Test condition / Test method

Test item

Specification

Solderability

At least 95% of a surface of each terminal

*Solder bath temperature：235 ± 5°C

JIS C 0050-4.6

JESD22-B102D

electrode must be covered by fresh solder.

*Immersion time：2 ± 0.5 sec

Solder：Sn3Ag0.5Cu for lead-free

*Solder bath temperature：260 ± 5°C

*Leaching immersion time：30 ± 0.5 sec

Solder : SN63A

Leaching

Loss of metallization on the edges of each

electrode shall not exceed 25%.

(Resistance to

dissolution of

metallization)

IEC 60068-2-58

Resistance to soldering

heat

*Preheating temperature：120~150℃,

1 minute.

No mechanical damage.

Electrical specification shall satisfy the

descriptions in electrical characteristics under

the operational temperature range within -40

~ 85°C.

JIS C 0050-5.4

*Solder temperature：270±5°C

*Immersion time：10±1 sec

Solder：Sn3Ag0.5Cu for lead-free

Loss of metallization on the edges of each

electrode shall not exceed 25%.

Measurement to be made after keeping at

room temperature for 24±2 hrs

Drop Test

*Height：75 cm

No mechanical damage.

JIS C 0044

Electrical specification shall satisfy the

descriptions in electrical characteristics under

the operational temperature range within -40

~ 85°C.

*Test Surface：Rigid surface of concrete or

Customer’s specification.

steel.

*Times：6 surfaces for each units；2 times

for each side.

Vibration

*Frequency：10Hz~55Hz~10Hz(1min)

*Total amplitude：1.5mm

No mechanical damage.

JIS C 0040

Electrical specification shall satisfy the

descriptions in electrical characteristics under

the operational temperature range within -40

~ 85°C.

*Test times：6hrs.(Two hrs each in three

mutually perpendicular directions)

Adhesive Strength

of Termination

*Pressurizing force：

No remarkable damage or removal of the

termination.

5N(≦0603)；10N(>0603)

JIS C 0051- 7.4.3

*Test time：10±1 sec

Bending test

The middle part of substrate shall be

pressurized by means of the pressurizing rod

at a rate of about 1 mm/s per second until the

deflection becomes 1mm/s and then pressure

shall be maintained for 5±1 sec.

No mechanical damage.

JIS C 0051- 7.4.1

Electrical specification shall satisfy the

descriptions in electrical characteristics under

the operational temperature range within -40

~ 85°C.

Measurement to be made after keeping at

room temperature for 24±2 hours

Page 4 of 7

ASC_RFBPF2009A12T_V01

Nov. 2015

Approval sheet

Temperature cycle

JIS C 0025

1. 30±3 minutes at -40°C±3°C,

2. 10~15 minutes at room temperature,

3. 30±3 minutes at +85°C±3°C,

No mechanical damage.

Electrical specification shall satisfy the

descriptions in electrical characteristics

under the operational temperature range

within -40 ~ 85°C.

4. 10~15 minutes at room temperature,

Total 100 continuous cycles

Measurement to be made after keeping at

room temperature for 24±2 hrs

High temperature

JIS C 0021

*Temperature：85°C±2°C

No mechanical damage.

Electrical specification shall satisfy the

descriptions in electrical characteristics under

the operational temperature range within -40

~ 85°C.

*Test duration：1000+24/-0 hours

Measurement to be made after keeping at

room temperature for 24±2 hrs

Humidity

*Humidity：90% to 95% R.H.

*Temperature：40±2°C

*Time：1000+24/-0 hrs.

No mechanical damage.

(steady conditions)

JIS C 0022

Electrical specification shall satisfy the

descriptions in electrical characteristics under

the operational temperature range within -40

~ 85°C.

Measurement to be made after keeping at

room temperature for 24±2 hrs

※500hrs measuring the first data then

1000hrs data

Low temperature

JIS C 0020

*Temperature：-40°C±2°C

No mechanical damage.

Electrical specification shall satisfy the

descriptions in electrical characteristics under

the operational temperature range within -40

~ 85°C.

*Test duration：1000+24/-0 hours

Measurement to be made after keeping at

room temperature for 24±2 hrs

Page 5 of 7

ASC_RFBPF2009A12T_V01

Nov. 2015

Approval sheet

SOLDERING CONDITION

Typical examples of soldering processes that provide reliable joints without any damage are given in Fig 2,

Fig 2. Infrared soldering profile

ORDERING CODE

BPF

Product Code

BPF :

2009

Walsin

RF device

Dimension code

Application

Specification

Design code

Packing

T : Reeled

Per 2 digits of Length,

Width, Thickness :

A : 2.4GHz ISM Band

Band Pass Filter

e.g. :

2009 =

Length 20,

Width 12,

Thickness 09

Minimum Ordering Quantity: 2000 pcs per reel.

PACKAGING

Plastic Tape specifications (unit :mm)

Index

ΦD

Dimension (mm)

Index

1.55 + 0.10

1.40 ± 0.10

2.30 ± 0.10

1.1 ± 0.10

8.0 ± 0.10

Dimension (mm)

1.75 ± 0.10

3.50 ± 0.05

4.00 ± 0.10

2.00 ± 0.10

Page 6 of 7

ASC_RFBPF2009A12T_V01

Nov. 2015

Approval sheet

Reel dimensions

Index

Φ178.0

Φ60.0

Φ13.0

Dimension (mm)

Taping Quantity: 2000 pieces per 7” reel

CAUTION OF HANDLING

Limitation of Applications

Please contact us before using our products for the applications listed below which require especially high reliability for

the prevention of defects, which might directly cause damage to the third party’s life, body or property.

(1) Aircraft equipment

(2) Aerospace equipment

(3) Undersea equipment

(4) Medical equipment

(5) Disaster prevention / crime prevention equipment

(6) Traffic signal equipment

(7) Transportation equipment (vehicles, trains, ships, etc.)

(8) Applications of similar complexity and /or reliability requirements to the applications listed in the above.

Storage condition

(1) Products should be used in 6 months from the day of WALSIN outgoing inspection, which can be

confirmed.

(2) Storage environment condition.

Products should be storage in the warehouse on the following conditions.

Temperature

Humidity

: -10 to +40℃

: 30 to 70% relative humidity

Don’t keep products in corrosive gases such as sulfur. Chlorine gas or acid or it may cause oxidization of

electrode, resulting in poor solderability.

Products should be storage on the palette for the prevention of the influence from humidity, dust and son on.

Products should be storage in the warehouse without heat shock, vibration, direct sunlight and so on.

Products should be storage under the airtight packaged condition.

Page 7 of 7

ASC_RFBPF2009A12T_V01

Nov. 2015

相关型号：