RFBPF2012060AAT [WALSIN]
2.4 GHz ISM Band RF Application;型号: | RFBPF2012060AAT |
厂家: | Walsin Technology |
描述: | 2.4 GHz ISM Band RF Application ISM频段 |
文件: | 总7页 (文件大小:507K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Approval sheet
RFBPF Series – 2012(0805)- RoHS Compliance
MULTILAYER CERAMIC BAND PASS FILTER
Halogens Free Product
2.4 GHz ISM Band RF Application
P/N: RFBPF2012060AAT
*Contents in this sheet are subject to change without prior notice.
Page 1 of 7
ASC_RFBPF2012060AAT_V06
Dec. 2015
Approval sheet
FEATURES
1.
2.
3.
4.
5.
6.
Miniature footprint: 2.0 X 1.2 X 0.6 mm3
Low Profile Thickness
Low Insertion loss (Typical -1.5dB)
High Rejection Rate
High attenuation on 3nd harmonic suppressed
LTCC process
APPLICATIONS
1.
2.
2.4GHz ISM band RF applications
Bluetooth, Wireless LAN 802.11b/g, HomeRF
CONSTRUCTION
P3
P2
P1
PIN
P1
P2
P3
Connection
GND
PIN
P4
P5
P6
Connection
GND
INPUT port
GND
OUTPUT port
GND
P4
P5
P6
DIMENSIONS
Figure
Symbol
Dimension (mm)
L
W
T
2.0 ± 0.2
1.2 ± 0.2
0.6 ± 0.1
0.4 ± 0.2
0.4 ± 0.2
0.4 ± 0.2
0.2 ± 0.1
Top view
Bottom view
Side view
A
B
C
D
Page 2 of 7
ASC_RFBPF2012060AAT_V06
Dec. 2015
Approval sheet
ELECTRICAL CHARACTERISTICS
RFBPF2012060AAT
Specification
Frequency range
2450 ± 50 MHz
1.5 dB typ at +25C
Insertion Loss
Attenuation
1.8 dB max at -40C ~ +85C
30 dB min. @ 880~960 MHz
25 dB min. @ 1710~1910 MHz
25 dB min. @ 4800~5000 MHz
30 dB min. @ 7200~7500 MHz
VSWR
2.0 max
50 Ω
Impedance
Operation Temperature Range
Moisture sensitivity levels
Typical Electrical Chart
-45C ~ +85C
LEVEL 1 (Refer to : IPC/JEDEC J-STD-020)
SOLDER LAND PATTERN
Figure
Symbol
L1
Dimension (mm)
1.38 ± 0.10
0.45 ± 0.05
0.63 ± 0.05
0.51 ± 0.05
1.05 ± 0.10
1.08 ± 0.10
0.68 ± 0.05
0.43 ± 0.05
0.60 ± 0.05
0.25 ± 0.05
0.40 ± 0.05
0.23 ± 0.05
L2
L3
L4
W1
W2
W3
W4
W5
D1
D2
S
Line width to de designed to match 50 Ω characteristic impedance, depending on PCB material and thickness.
D1 and D2 are the grounding through holes.
Page 3 of 7
ASC_RFBPF2012060AAT_V06
Dec. 2015
Approval sheet
RELIABILITY TEST
Test condition / Test method
Test item
Specification
Solderability
At least 95% of a surface of each terminal
*Solder bath temperature:235 5C
JIS C 0050-4.6
JESD22-B102D
electrode must be covered by fresh solder.
*Immersion time:2 0.5 sec
Solder:Sn3Ag0.5Cu for lead-free
*Solder bath temperature:260 5C
*Leaching immersion time:30 0.5 sec
Solder : SN63A
Leaching
Loss of metallization on the edges of each
electrode shall not exceed 25%.
(Resistance to
dissolution of
metallization)
IEC 60068-2-58
Resistance to soldering
heat
*Preheating temperature:120~150℃,
1 minute.
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40
~ 85°C.
JIS C 0050-5.4
*Solder temperature:2705C
*Immersion time:101 sec
Solder:Sn3Ag0.5Cu for lead-free
Loss of metallization on the edges of each
electrode shall not exceed 25%.
Measurement to be made after keeping at
room temperature for 242 hrs
Drop Test
*Height:75 cm
No mechanical damage.
JIS C 0044
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40
~ 85°C.
*Test Surface:Rigid surface of concrete or
Customer’s specification.
steel.
*Times:6 surfaces for each units;2 times
for each side.
Vibration
*Frequency:10Hz~55Hz~10Hz(1min)
*Total amplitude:1.5mm
No mechanical damage.
JIS C 0040
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40
~ 85°C.
*Test times:6hrs.(Two hrs each in three
mutually perpendicular directions)
Adhesive Strength
of Termination
*Pressurizing force:
No remarkable damage or removal of the
termination.
5N(≦0603);10N(>0603)
JIS C 0051- 7.4.3
*Test time:10±1 sec
Bending test
The middle part of substrate shall be
pressurized by means of the pressurizing rod
at a rate of about 1 mm/s per second until the
deflection becomes 1mm/s and then pressure
shall be maintained for 51 sec.
No mechanical damage.
JIS C 0051- 7.4.1
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40
~ 85°C.
Measurement to be made after keeping at
room temperature for 242 hours
Page 4 of 7
ASC_RFBPF2012060AAT_V06
Dec. 2015
Approval sheet
Temperature cycle
JIS C 0025
1. 303 minutes at -40C3C,
2. 10~15 minutes at room temperature,
3. 303 minutes at +85C3C,
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics
under the operational temperature range
within -40 ~ 85°C.
4. 10~15 minutes at room temperature,
Total 100 continuous cycles
Measurement to be made after keeping at
room temperature for 242 hrs
High temperature
JIS C 0021
*Temperature:85C2C
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40
~ 85°C.
*Test duration:1000+24/-0 hours
Measurement to be made after keeping at
room temperature for 242 hrs
Humidity
*Humidity:90% to 95% R.H.
*Temperature:402C
*Time:1000+24/-0 hrs.
No mechanical damage.
(steady conditions)
JIS C 0022
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40
~ 85°C.
Measurement to be made after keeping at
room temperature for 242 hrs
※ 500hrs measuring the first data then
1000hrs data
Low temperature
JIS C 0020
*Temperature:-40C2C
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40
~ 85°C.
*Test duration:1000+24/-0 hours
Measurement to be made after keeping at
room temperature for 242 hrs
Page 5 of 7
ASC_RFBPF2012060AAT_V06
Dec. 2015
Approval sheet
SOLDERING CONDITION
Typical examples of soldering processes that provide reliable joints without any damage are given in Fig 2,
Fig 2. Infrared soldering profile
ORDERING CODE
RF
Walsin
BPF
201206
0
A
A
T
Product Code
BPF :
Dimension code
Unit of
dimension
Application
Specification
Design Code
Packing
T : Reeled
RF Pb free
device
Per 2 digits of
Length, Width,
Thickness :
A : 2.4GHz ISM
Band
0 : 0.1 mm
1 : 1.0 mm
Band Pass Filter
e.g. :
201206 =
Length 20,
Width 12,
Thickness 06
Minimum Ordering Quantity: 2000 pcs per reel.
PACKAGING
Plastic Tape specifications (unit :mm)
ΦD
Index
Ao
1.32 ± 0.10
E
Bo
2.25 ± 0.10
F
T
W
Dimension (mm)
Index
1.50 ± 0.10
Po
0.80 ± 0.10
P1
8.00 ± 0.10
P2
Dimension (mm)
1.75 ± 0.10
3.50± 0.05
4.00 ± 0.10
4.00 ± 0.10
2.00 ± 0.10
Page 6 of 7
ASC_RFBPF2012060AAT_V06
Dec. 2015
Approval sheet
Reel dimensions
B
A
C
Index
A
B
C
Dimension (mm)
178
60.0
13.5
Taping Quantity:2000 pieces per 7” reel
CAUTION OF HANDLING
Limitation of Applications
Please contact us before using our products for the applications listed below which require especially high reliability for
the prevention of defects, which might directly cause damage to the third party’s life, body or property.
(1) Aircraft equipment
(2) Aerospace equipment
(3) Undersea equipment
(4) Medical equipment
(5) Disaster prevention / crime prevention equipment
(6) Traffic signal equipment
(7) Transportation equipment (vehicles, trains, ships, etc.)
(8) Applications of similar complexity and /or reliability requirements to the applications listed in the above.
Storage condition
(1) Products should be used in 6 months from the day of WALSIN outgoing inspection, which can be
confirmed.
(2) Storage environment condition.
Products should be storage in the warehouse on the following conditions.
Temperature
Humidity
: -10 to +40℃
: 30 to 70% relative humidity
Don’t keep products in corrosive gases such as sulfur. Chlorine gas or acid or it may cause oxidization of
electrode, resulting in poor solderability.
Products should be storage on the palette for the prevention of the influence from humidity, dust and son on.
Products should be storage in the warehouse without heat shock, vibration, direct sunlight and so on.
Products should be storage under the airtight packaged condition.
Page 7 of 7
ASC_RFBPF2012060AAT_V06
Dec. 2015
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明