RFBPF2012080A88D1T [WALSIN]
2.4 GHz ISM Band Working Frequency;型号: | RFBPF2012080A88D1T |
厂家: | Walsin Technology |
描述: | 2.4 GHz ISM Band Working Frequency ISM频段 |
文件: | 总7页 (文件大小:1183K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Approval sheet
RFBPF Series – 2012(0805)- RoHS Compliance
MULTILAYER CERAMIC BAND PASS FILTER
Halogens Free Product
2.4 GHz ISM Band Working Frequency
P/N: RFBPF2012080A88D1T
*Contents in this sheet are subject to change without prior notice.
Page 1 of 7
ASC_RFBPF2012080A88D1T_V01
Mar. 2012
Approval sheet
FEATURES
1.
2.
3.
4.
5.
Miniature footprint: 2.0 X 1.2 X 0.8 mm3
Low Insertion Loss
High Rejection on GSM Bands
High attenuation on 2170 MHz & 2nd harmonic suppressed
LTCC process
APPLICATIONS
1.
2.
2.4GHz ISM band RF applications
Bluetooth, Wireless LAN 802.11b/g/n, HomeRF
CONSTRUCTION
PIN
1
Connection
Input port
GND
2
3
Output port
P3
P2
P1
DIMENSIONS
Figure
Symbol
Dimension (mm)
L
2.00 ± 0.15
W
T
1.25 ± 0.10
0.80 ± 0.10
A
B
C
0.95 ± 0.10
0.275 ± 0.10
0.25 ± 0.10
D
E
F
0.60 ± 0.10
0.175 ± 0.10
0.15 ± 0.10
Page 2 of 7
ASC_RFBPF2012080A88D1T_V01
Mar. 2012
Approval sheet
ELECTRICAL CHARACTERISTICS
RFBPF2012080A88D1T
Frequency range
Specification
2450± 50 MHz
1.8 dB max at +25°C
Insertion Loss
2.0 dB max at -40°C ~ +85°C
VSWR
2.0 max
50 Ω
Impedance
30@ 860~ 960MHz
30@ 1545~ 1605MHz
35@ 1710~ 1990MHz
30@ 2170MHz
Attenuation (min.)
30@ 4800~ 5000MHz
-40°C ~ +85°C
Operation Temperature Range
Typical Electrical Chart
SOLDER LAND PATTERN
Figure
Unit : mm
Line width to be designed to match 50 Ω characteristic impedance, depending on PCB material and thickness.
Page 3 of 7 ASC_RFBPF2012080A88D1T_V01 Mar. 2012
Approval sheet
RELIABILITY TEST
Test item
Test condition / Test method
Specification
Solderability
JIS C 0050-4.6
*Solder bath temperature:235 ± 5°C
*Immersion time:2 ± 0.5 sec
At least 95% of a surface of each terminal
electrode must be covered by fresh solder.
JESD22-B102D
Solder:Sn3Ag0.5Cu for lead-free
Leaching
*Solder bath temperature:260 ± 5°C
*Leaching immersion time:30 ± 0.5 sec
Solder : SN63A
Loss of metallization on the edges of each
electrode shall not exceed 25%.
(Resistance to dissolution
of metallization)
IEC 60068-2-58
Resistance to soldering heat
JIS C 0050-5.4
*Preheating temperature:120~150℃,
1 minute.
No mechanical damage.
Samples shall satisfy electrical specification
after test.
*Solder temperature:270±5°C
*Immersion time:10±1 sec
Loss of metallization on the edges of each
electrode shall not exceed 25%.
Solder:Sn3Ag0.5Cu for lead-free
Measurement to be made after keeping at
room temperature for 24±2 hrs
Drop Test
JIS C 0044
*Height:75 cm
No mechanical damage.
Samples shall satisfy electrical specification
after test.
*Test Surface:Rigid surface of concrete
Customer’s specification.
or steel.
*Times:6 surfaces for each units;2
times for each side.
Adhesive Strength
of Termination
*Pressurizing force:
No remarkable damage or removal of the
termination.
5N(≦0603);10N(>0603)
JIS C 0051- 7.4.3
*Test time:10±1 sec
Bending test
The middle part of substrate shall be
pressurized by means of the pressurizing
rod at a rate of about 1 mm/s per second
until the deflection becomes 1mm/s and
then pressure shall be maintained for 5±1
sec.
No mechanical damage.
Samples shall satisfy electrical specification
after test.
JIS C 0051- 7.4.1
Measurement to be made after keeping at
room temperature for 24±2 hours
Page 4 of 7
ASC_RFBPF2012080A88D1T_V01
Mar. 2012
Approval sheet
Temperature cycle
JIS C 0025
1. 30±3 minutes at -40°C±3°C,
2. 10~15 minutes at room temperature,
3. 30±3 minutes at +85°C±3°C,
No mechanical damage.
Samples shall satisfy electrical
specification after test.
4. 10~15 minutes at room temperature,
Total 100 continuous cycles
Measurement to be made after keeping at
room temperature for 24±2 hrs
Vibration
*Frequency:10Hz~55Hz~10Hz(1min)
*Total amplitude:1.5mm
No mechanical damage.
Samples shall satisfy electrical specification
after test.
JIS C 0040
*Test times:6hrs.(Two hrs each in three
mutually perpendicular directions)
High temperature
JIS C 0021
*Temperature:85°C±2°C
No mechanical damage.
Samples shall satisfy electrical specification
after test.
*Test duration:1000+24/-0 hours
Measurement to be made after keeping at
room temperature for 24±2 hrs
Humidity
*Humidity:90% to 95% R.H.
*Temperature:40±2°C
*Time:1000+24/-0 hrs.
No mechanical damage.
Samples shall satisfy electrical specification
after test.
(steady conditions)
JIS C 0022
Measurement to be made after keeping at
room temperature for 24±2 hrs
※500hrs measuring the first data then
1000hrs data
Low temperature
JIS C 0020
*Temperature:-40°C±2°C
No mechanical damage.
Samples shall satisfy electrical specification
after test.
*Test duration:1000+24/-0 hours
Measurement to be made after keeping at
room temperature for 24±2 hrs
Page 5 of 7
ASC_RFBPF2012080A88D1T_V01
Mar. 2012
Approval sheet
SOLDERING CONDITION
Typical examples of soldering processes that provide reliable joints without any damage are given in Fig 2,
Fig 2. Infrared soldering profile
ORDERING CODE
RF
Walsin
BPF
Product Code
BPF :
201208
0
A
88D1T
Specification
Design code
Dimension code
Unit of
Application
dimension
0 : 0.1 mm
1 : 1.0 mm
RF device
Per 2 digits of Length,
Width, Thickness :
A : 2.4GHZ ISM
Band
Band Pass Filter
e.g. :
201208 =
Length 20,
Width 12,
Thickness 08
Minimum Ordering Quantity: 2000 pcs per reel.
PACKAGING
Plastic Tape specifications (unit :mm)
Index
Ao
Bo
T
W
ΦD
Dimension (mm)
Index
1.55 + 0.10
1.45 ± 0.10
E
2.25 ± 0.10
F
1.10 ± 0.10
P1
8.0 ± 0.10
P2
Po
Dimension (mm)
1.75 ± 0.10
3.50 ± 0.05
4.00 ± 0.10
4.00 ± 0.10
2.00 ± 0.10
Page 6 of 7
ASC_RFBPF2012080A88D1T_V01
Mar. 2012
Approval sheet
Reel dimensions
B
A
C
Index
A
B
C
Φ178.0
Φ60.0
Φ13.0
Dimension (mm)
Taping Quantity: 2000 pieces per 7” reel
CAUTION OF HANDLING
Limitation of Applications
Please contact us before using our products for the applications listed below which require especially high reliability for
the prevention of defects, which might directly cause damage to the third party’s life, body or property.
(1) Aircraft equipment
(2) Aerospace equipment
(3) Undersea equipment
(4) Medical equipment
(5) Disaster prevention / crime prevention equipment
(6) Traffic signal equipment
(7) Transportation equipment (vehicles, trains, ships, etc.)
(8) Applications of similar complexity and /or reliability requirements to the applications listed in the above.
Storage condition
(1) Products should be used in 6 months from the day of WALSIN outgoing inspection, which can be
confirmed.
(2) Storage environment condition.
¢
¢
¢
¢
Products should be storage in the warehouse on the following conditions.
Temperature
Humidity
: -10 to +40℃
: 30 to 70% relative humidity
Don’t keep products in corrosive gases such as sulfur. Chlorine gas or acid or it may cause oxidization of
electrode, resulting in poor solderability.
¢
¢
¢
Products should be storage on the palette for the prevention of the influence from humidity, dust and son on.
Products should be storage in the warehouse without heat shock, vibration, direct sunlight and so on.
Products should be storage under the airtight packaged condition.
Page 7 of 7
ASC_RFBPF2012080A88D1T_V01
Mar. 2012
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明