WQAC292BZ0GT10PB [WALSIN]

SMD Air Wound Coil Inductors;


型号：	WQAC292BZ0GT10PB
厂家：	Walsin Technology
描述：	SMD Air Wound Coil Inductors 射频感应器电感器
文件：	总6页 (文件大小：283K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

WQAC292 Series

SMD Air Wound Coil Inductors

AEC-Q200

*Contents in this sheet are subject to change without prior notice.

Page 1 of 6

ASC_WQAC292 Series_V1.0_Auto

Nov. Y2017

Features

Acrylic jacket(WQAC292) provides a flat top for pick and place

Acrylic cap provides a flat top for pick and place mechine for high productive manufacture.

Excellent Q and SRF characteristics for RF application, escipally in subGHz band.

Narrow tolerance available for precise design requirements.

AEC-Q200

Applications

Communication system front-end circuit: GSM/3G/LTE, Wi-Fi, GPS.

Cabel/Terrestrial/BS Tuner, Bluetooth, Wireless Audio, Remote control.

M2M: ZigBee, Proprietary wilreless.

EMI solustion in high frequency circuits.

Automotive

Shape and Dimension

Recommend Patterns

Measure Line 0°

TINNED LENGTH BETWEEN 30°AND 180°

※CO-PLANE≦0.10mm

WQAC292A Series

Unit: mm

WQAC292B Series

WQAC

Series

1.42±0.13

1.37±0.15

0.89±0.25

2.21±0.25

4.04±0.30

1.83±0.25

3.66±0.30

292A

292B

Page 2 of 6

ASC_WQAC292 Series_V1.0_Auto

Nov. Y2017

Ordering Information

292A

T02

Product

Code

Series

Dimension

Series

Extension

Tolerance

Value

Packing Code

WQ:

Inductor

Air wound

coil

inductor.

292A

292B

Z0:STD

T02 = 2Turns

T10 =10Turns

P=7” Reeled

(Embossed reel)

B:STD

G: ± 2%

J: ± 5%

K: ± 10%

AEC-Q200

Electrical Characteristics

● WQAC292 series

RDC

Maximum

(mΩ)

Typical Q @

Frequency

(MHz)

SRF

Maximum

(GHz)

Rated Current

Maximum

(A)

Walsin Part Number

Turns

L(nH)

Tolerance Q Min

WQAC292AZ0□T02PB

WQAC292AZ0□T03PB

WQAC292AZ0□T04PB

WQAC292AZ0□T05PB

WQAC292BZ0□T06PB

WQAC292BZ0□T07PB

WQAC292BZ0□T08PB

WQAC292BZ0□T09PB

WQAC292BZ0□T10PB

1.65

2.55

3.85

5.4

J、K

100

800

8.2

7.5

1.6

G、J、K

G、J

5.6

6.5

7.15

8.8

9.85

12.55

5.2

4.6

TOLERANCE： G=±2%, J=±5%, K=±10%

※TEST INSTRUMENT: HP4291B、FIXTURE HP16193A、HP8753E、CHROMA16502

NOTE : 1. Inductance & Q measured on the HP4291B. With HP16193A test fixture.

2. SRF measured using the HP8753E

3. Operating temperature range: -40℃ to +125℃.

4. Electrical specifications at 25℃.

5. MSL：LEVEL 1

Page 3 of 6

ASC_WQAC292 Series_V1.0_Auto

Nov. Y2017

RELIABILITY PERFORMANCE

Test Item

Standard

Source

Test Condition

1000 hrs. at rated operating temperature (e.g. 125°C

part can be stored for 1000 hrs. @ 125°C. Same

applies for 105°C and 85°C. Unpowered.

High Temperature

Exposure (Storage)

MIL-STD-202

Method 108

Measurement at 24±4 hours after test conclusion.

1000 cycles (-40°C to +125°C). Note: If 85°C part o r

105°C part the 1000 cycles will be at that

temperature. Measurement at 24±4 hours after test

conclusion. 30min maximum dwell time at each

temperature extreme. 1 min. maximum transition

time.

JESD22

Method JA-104

Temperature Cycling

1000 hours 85°C/85%RH. Unpowered.

Measurement at 24±4 hours after test conclusion.

MIL-STD-202

Method 103

Biased Humidity

Operational Life

Mechanical Shock

1000 hrs. @ 105°C. If 85°C or 125°C part will be

tested at that temperature.

Measurement at 24±4 hours after test conclusion.

MIL-PRF-27

Method

213.

Condition

Peak Value: 100g’s, Duration: 6ms, Waveform: Half- MIL-STD-202

sine

Method 213

Velocity Change: 12.3ft/sec

5g's for 20 minutes, 12 cycles each of 3 orientations.

Note: Use 8"X5" PCB, .031" thick, 7 secure points on

one long side and 2 secure points at corners of

opposite sides. Parts mounted within 2" from any

secure point. Test from 10-2000 Hz.

MIL-STD-202

Method 204

Vibration

Condition B No pre-heat of samples. Note: Single

Resistance to Soldering Heat Wave Solder - Procedure 2 for SMD and Procedure 1

for Leaded with solder within 1.5mm of device body.

MIL-STD-202

Method 210

Passive Component Human Body Model (HBM)

Electrostatic Discharge (ESD) Test.

Only direct contact discharge, record the voltage

value what the sample can pass.

AEC-Q200-002

ISO/DIS10605

ESD

For both Leaded & SMD. Electrical Test not required.

Magnification 50X. Conditions:

Leaded: Method A @ 235°C, category 3. SMD:

a) Method B, 4 hrs @ 155°C dry heat @ 235°C

Solderability

J-STD-002

b) Method B @ 215°C category 3.

c) Method D category 3 @ 260°C.

Flammability

Board Flex

V-0 or V-1 Acceptable

UL-94

60 sec minimum holding time.

AEC-Q200-005

Terminal Strength (SMD)

Page 4 of 6

Force of 1.8kg for 60 seconds.

AEC-Q200-006

ASC_WQAC292 Series_V1.0_Auto

Nov. Y2017

Typical RoHS Reflow Profile

Page 5 of 6

ASC_WQAC292 Series_V1.0_Auto

Nov. Y2017

Packaging Specification

THE FORCE FOR TEARING OFF COVER TAPE IS 10 TO

100 GRAMS IN THE ARROW DIRECTION.

THICKNESS (t)

0.10 MAX

165 TO 180°

TOP COVER TAPE

EMBOSSED CAVITY

BASE TAPE

EMBOSSED CARRIER

START

END

NO COMPONENTS

160 (mm) MIN

COMPONENTS

NO COMPONENTS

MIN. 390 (mm)

MAX. 560 (mm)

COVER TAPE

USER DIRECTION OF FEED

CARRIER TAPE REELS (mm)

DIMENSIONS OF CARRIER TAPE (mm)

MATERIAL:

PLASTIC

Unit：mm

292A

DIM.

±0.8

±2.0

178

8.4

12.5 1.75 3.50

0.23

8.0

1.50 4.00 4.00 2.00

+1.5

-0

+1.5

-0

+0.10

-0

TOL. ±2.0

±0.10 ±0.10

±0.05 ±0.20

±0.10 ±0.10 ±0.10

292B

DIM.

1.50

4.00

2.00

180

12.4

16.8

1.75

3.50

0.35

+0.5

-0.2

-0

+0.10

-0

TOL. MAX.

MAX. ±0.10 ±0.10 MIN. ±0.05 ±0.30

±0.10 ±0.10 ±0.10

Quantity per reel：2K pcs

Page 6 of 6

ASC_WQAC292 Series_V1.0_Auto

Nov. Y2017

相关型号：