P6SMAL36A [WEEN]

600W Transient Voltage Suppressor;


型号：	P6SMAL36A
厂家：	WeEn Semiconductors
描述：	600W Transient Voltage Suppressor
文件：	总7页 (文件大小：557K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

P6SMAL Series

600W Transient Voltage Suppressor

Rev.01 - 08 February 2021

Product data sheet

1. General description

600W transient voltage suppressor (TVS) in SMA package, designed

to protect electronic circuit which induced by lightning surge or other

transient voltage situation.

2. Features and beneﬁts

•

Peak pulse power 600W @ 10/1000μs waveform

SMA low proﬁle package: less than 1.1 mm

Excellent clamping capability

Low incremental surge resistance

Surface mount package for easy assembly and board space saving

Typical I_R< 1μA When V_R> 12V

Fast response time: Typically less than 1.0ps from 0V to BV min

IEC 61000-4-2 ESD 30kV (Air), 30kV (Contact)

EFT protection of data lines in accordance with IEC 61000-4-4

High temperature to reﬂow soldering guaranteed: 260°C/10sec

Meet UL94V-0 ﬂammability classiﬁcation which guaranteed by

mold compound

Cathode

Anode

Uni-directional

alogen-Free

RoHS

•

Meet MSL level1, per J-STD-020

Lead free lead ﬁnish

Halogen free and RoHS compliant

3. Applications

•

Power supply protection

Industrial application

Power management

I/O interface protection

4. Ordering information

Type number

Package

name

Orderable part number Packing

method

Small packing Package

Package

issue date

quantity

version

P6SMALxxxXX

SMAL

P6SMALxxxXX

Tape and reel

3000

SMALH

18-Oct-2020

eg. P6SMAL5.0A

SMAL

P6SMAL5.0AX

Tape and reel

3000

SMALH

18-Oct-2020

5. Absolute maximum ratings

In accordance with the Absolute Maximum Rating System (IEC 60134).

T_j= 25 °C unless otherwise speciﬁed.

Symbol Parameter

Conditions

Values

Unit

Absolute maximum rating

P_PPM

P_M(AV)

I_FSM

peak pulse power

[1]

600

steady state power dissipation on inﬁnite heatsink at T = 50 °C

peak forward surge current

t_p= 8.3 ms; single half sine-wave pulse;

duty cycle = 4 pulses per minute

maximum; unidirectional units only

V_F

forward on-state voltage

storage temperature range

operating temperature range

I_F= 25 A; unidirectional units only

3.5

stg

-65 to 150

°C

T_j

[1] In accordance with IEC 61643-321 (10/1000 μs current waveform).

WeEn Semiconductors

P6SMAL series

600W Transient Voltage Suppressor

6. Characteristics

T_j= 25 °C unless otherwise speciﬁed.

Reverse

Stand oﬀ

Voltage

V_R

Breakdown

Test

current

I_T

Max.

Clamping

Voltage V_C@

I_pp

Max. Peak

Pulse

Current

I_pp

Maximum

Reverse

Leakage

I_R@ V_R

(μA)

Marking

Voltage V_BR

I_T

(V)

(mA)

(V)

(A)

Min

6.4

Max

P6SMAL5.0A

P6SMAL6.0A

P6SMAL6.5A

P6SMAL7.0A

P6SMAL8.0A

P6SMAL9.0A

P6SMAL10A

P6SMAL11A

P6SMAL12A

P6SMAL13A

P6SMAL14A

P6SMAL15A

P6SMAL16A

P6SMAL17A

P6SMAL18A

P6SMAL20A

P6SMAL22A

P6SMAL24A

P6SMAL26A

P6SMAL28A

P6SMAL30A

P6SMAL33A

P6SMAL36A

P6SMAL40A

P6SMAL43A

P6SMAL45A

P6SMAL48A

P6SMAL51A

P6SMAL54A

P6SMAL58A

P6SMAL60A

P6SMAL64A

P6SMAL70A

P6SMAL75A

P6SMAL78A

P6SMAL85A

9.2

10.3

11.2

65.3

58.3

53.6

400

250

100

6A005H

6A006H

6A06FH

6A007H

6A008H

6A009H

6A010H

6A011H

6A012H

6A013H

6A014H

6A015H

6A016H

6A017H

6A018H

6A020H

6A022H

6A024H

6A026H

6A028H

6A030H

6A033H

6A036H

6A040H

6A043H

6A045H

6A048H

6A051H

6A054H

6A058H

6A060H

6A064H

6A070H

6A075H

6A078H

6A085H

6.67

7.22

7.78

8.89

7.37

7.98

8.6

6.5

9.83

11.1

12.3

13.5

14.7

15.9

17.2

18.5

19.7

20.9

22.1

24.5

26.9

29.5

31.9

34.4

36.8

40.6

44.2

49.1

52.8

55.3

58.9

62.7

66.3

71.2

73.7

78.6

13.6

15.4

44.2

11.1

12.2

13.3

14.4

15.6

16.7

17.8

18.9

35.3

18.2

19.9

21.5

23.2

24.4

30.2

25.9

24.6

23.1

21.8

20.6

18.6

16.9

15.5

14.3

13.3

12.4

11.3

10.4

9.3

27.6

29.2

32.4

35.5

38.9

42.1

45.4

48.4

53.3

58.1

64.5

69.4

72.7

77.4

82.4

87.1

93.6

96.8

103

113

22.2

24.4

26.7

28.9

31.1

33.3

36.7

44.4

47.8

8.7

8.3

53.3

56.7

7.8

7.3

6.9

64.4

66.7

71.1

77.8

83.3

86.7

94.4

6.5

6.2

5.9

5.3

92.1

95.8

104

121

126

137

4.8

4.4

P6SMAL series

All information provided in this document is subject to legal disclaimers.

Product data sheet

08 February 2021

2 / 7

WeEn Semiconductors

P6SMAL series

600W Transient Voltage Suppressor

Uni-directional

Vc VBR

Ipp

Fig. 1. I-V curve characteristics; Uni-directional

Fig. 2. Peak pulse power derating curve

100

T_j= 25°C

(^P%^P)

(k^PW^PM)

Non-repetitive pulse waveform

shown in pulse waveform graph

t_r= 10 μs

Peak Value I_PP

100

Half Value I_PP/2

1.0

0.1

t_p

10 x 1000 Waveform

as defined be R.E.A

0.1

1.0

100

1000

10000

t_p(ms)

t_p(μs)

Fig. 3. Pulse waveform

Fig. 4. Pulse rating curve

I_FSM

(A)

Pulse width 8.3ms

single half sine-wave

Uni-directional V=0V

number of cycles at 60Hz

Fig. 5. Maximum non-repetitive surge current

Fig. 6. Typical junction capacitance

P6SMAL series

All information provided in this document is subject to legal disclaimers.

Product data sheet

08 February 2021

3 / 7

WeEn Semiconductors

P6SMAL series

600W Transient Voltage Suppressor

P6 SMAL xx xx

A: Uni-directional

CA: Bi-directional

Reverse Standard off Voltage V_R

SMA Package (L-lead)

Power rating 600W

Fig. 7. Part numbering

Product Type Marking Code

XXXXXH

YWWDXX

Trace Code Marking

Cathode band

(for uni-directional products only)

Y: Year Code

WW: Week Code

XX: Assembly Lot Code

Fig. 8. Part marking

P6SMAL series

All information provided in this document is subject to legal disclaimers.

Product data sheet

08 February 2021

4 / 7

WeEn Semiconductors

P6SMAL series

600W Transient Voltage Suppressor

7. Package outline

SMAL

P6SMAL series

All information provided in this document is subject to legal disclaimers.

Product data sheet

08 February 2021

5 / 7

WeEn Semiconductors

P6SMAL series

600W Transient Voltage Suppressor

Right to make changes — WeEn Semiconductors reserves the right to

make changes to information published in this document, including without

limitation specifications and product descriptions, at any time and without

notice. This document supersedes and replaces all information supplied prior

to the publication hereof.

8. Legal information

Suitability for use — WeEn Semiconductors products are not designed,

authorized or warranted to be suitable for use in life support, life-critical

or safety-critical systems or equipment, nor in applications where failure

or malfunction of an WeEn Semiconductors product can reasonably

be expected to result in personal injury, death or severe property or

environmental damage. WeEn Semiconductors and its suppliers accept no

liability for inclusion and/or use of WeEn Semiconductors products in such

equipment or applications and therefore such inclusion and/or use is at the

customer’s own risk.

Data sheet status

Document

Product

Definition

status [1][2] status [3]

Objective

[short] data

sheet

Development This document contains data from

the objective specification for product

development.

Preliminary

[short] data

sheet

Qualification This document contains data from the

Quick reference data — The Quick reference data is an extract of the

product data given in the Limiting values and Characteristics sections of this

document, and as such is not complete, exhaustive or legally binding.

preliminary specification.

Product

[short] data

sheet

Production

This document contains the product

specification.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. WeEn Semiconductors makes

no representation or warranty that such applications will be suitable for the

specified use without further testing or modification.

lease consult the most recently issued document before initiating or

completing a design.

]

Customers are responsible for the design and operation of their applications

and products using WeEn Semiconductors products, and WeEn

Semiconductors accepts no liability for any assistance with applications or

customer product design. It is customer’s sole responsibility to determine

whether the WeEn Semiconductors product is suitable and fit for the

customer’s applications and products planned, as well as for the planned

application and use of customer’s third party customer(s). Customers should

provide appropriate design and operating safeguards to minimize the risks

associated with their applications and products.

[2] The term 'short data sheet' is explained in section "Definitions".

[3] The product status of device(s) described in this document may have

changed since this document was published and may differ in case of

multiple devices. The latest product status information is available on

the Internet at URL http://www.ween-semi.com.

Definitions

WeEn Semiconductors does not accept any liability related to any default,

damage, costs or problem which is based on any weakness or default

in the customer’s applications or products, or the application or use by

customer’s third party customer(s). Customer is responsible for doing all

necessary testing for the customer’s applications and products using WeEn

Semiconductors products in order to avoid a default of the applications

and the products or of the application or use by customer’s third party

customer(s). WeEn does not accept any liability in this respect.

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. WeEn Semiconductors does not give any

representations or warranties as to the accuracy or completeness of

information included herein and shall have no liability for the consequences

of use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is

intended for quick reference only and should not be relied upon to contain

detailed and full information. For detailed and full information see the

relevant full data sheet, which is available on request via the local WeEn

Semiconductors sales office. In case of any inconsistency or conflict with the

short data sheet, the full data sheet shall prevail.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those

given in the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

WeEn Semiconductors and its customer, unless WeEn Semiconductors and

customer have explicitly agreed otherwise in writing. In no event however,

shall an agreement be valid in which the WeEn Semiconductors product

is deemed to offer functions and qualities beyond those described in the

Product data sheet.

No offer to sell or license — Nothing in this document may be interpreted

or construed as an offer to sell products that is open for acceptance or the

grant, conveyance or implication of any license under any copyrights, patents

or other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

Disclaimers

Non-automotive qualified products — Unless this data sheet expressly

states that this specific WeEn Semiconductors product is automotive

qualified, the product is not suitable for automotive use. It is neither qualified

nor tested in accordance with automotive testing or application requirements.

WeEn Semiconductors accepts no liability for inclusion and/or use of non-

automotive qualified products in automotive equipment or applications.

Limited warranty and liability — Information in this document is believed

to be accurate and reliable. However, WeEn Semiconductors does not

give any representations or warranties, expressed or implied, as to the

accuracy or completeness of such information and shall have no liability for

the consequences of use of such information. WeEn Semiconductors takes

no responsibility for the content in this document if provided by an information

source outside of WeEn Semiconductors.

In the event that customer uses the product for design-in and use in

automotive applications to automotive specifications and standards,

customer (a) shall use the product without WeEn Semiconductors’ warranty

of the product for such automotive applications, use and specifications, and

(b) whenever customer uses the product for automotive applications beyond

WeEn Semiconductors’ specifications such use shall be solely at customer’s

own risk, and (c) customer fully indemnifies WeEn Semiconductors for

any liability, damages or failed product claims resulting from customer

design and use of the product for automotive applications beyond WeEn

Semiconductors’ standard warranty and WeEn Semiconductors’ product

specifications.

In no event shall WeEn Semiconductors be liable for any indirect, incidental,

punitive, special or consequential damages (including - without limitation -

lost profits, lost savings, business interruption, costs related to the removal

or replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason

whatsoever, WeEn Semiconductors’ aggregate and cumulative liability

towards customer for the products described herein shall be limited in

accordance with the Terms and conditions of commercial sale of WeEn

Semiconductors.

P6SMAL series

All information provided in this document is subject to legal disclaimers.

Product data sheet

08 February 2021

6 / 7

WeEn Semiconductors

P6SMAL series

600W Transient Voltage Suppressor

Translations — A non-English (translated) version of a document is for

reference only. The English version shall prevail in case of any discrepancy

between the translated and English versions.

Trademarks

Notice: All referenced brands, product names, service names and

trademarks are the property of their respective owners.

P6SMAL series

All information provided in this document is subject to legal disclaimers.

Product data sheet

08 February 2021

7 / 7

P6SMAL36A [WEEN]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E