1773900000 [WEIDMULLER]

Feed-through terminal, 6 mmÂ², Screw connection, PA 66, TS 35 TS 32; 直通式接线端子， 6 mmÂ² ，螺钉连接， PA 66 ， TS 35 TS 32


型号：	1773900000
厂家：	WEIDMULLER
描述：	Feed-through terminal, 6 mmÂ², Screw connection, PA 66, TS 35 TS 32 直通式接线端子， 6 mmÂ² ，螺钉连接， PA 66 ， TS 35 TS 32 端子和端子排
文件：	总4页 (文件大小：75K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 / TS 35 EN combination foot

| Modular feed-through terminals

General ordering data

Order No.

0212840000

Part designation

Version

SAK 6/EN RT

Feed-through terminal, 6 mm², Screw connection,

PA 66, TS 35 + TS 32

4008190205928

EAN

Qty.

100 pc(s).

Product notes

Note, ordering data

With AWG 6 and H07V-R10 conductors, an

increased MD torque of 1.4 to1.6 Nm should be

used.

Note, technical data

Note, accessories

For AWG 8-7 and AWG 8-19, tightening torque is

1.21.4 Nm

When used with twin ferrules ZH 0.5 - ZH 4, the

rated voltage is 690 V.

PT OKIECEx/ATEX rating data

EU-type examination certificate

IECEx Certificate of Conformity

ATEX voltage

KEMA97ATEX1798U

IECEXKEM06.0014U

690 V

ATEX current

36 A

ATEX conductor cross-section

IECEx voltage

6 mm²

690 V

IECEx current

36 A

IECEx conductor cross-section

Marking EN 60079-7

6 mm²

Ex e II

Marking ATEX Directive 94/9/EC

Ex II 2 G D

Additional technical data

Connection direction

on side

End plate required

Yes

Explosion-tested version "Ex e"

Installation advice

TS 35 + TS 32

Insulating material

PA 66

Levels cross-connected internally

No. of levels

Operating temperature range

Type of connection

- 50 °C, + 100 °C

Screwed

UL 94 flammability rating of insulation material

Version

Feed-through terminal

CSA rating data

Voltage (CSA)

600 V

CSA current

47 A

Min. cross-section (CSA)

Max. cross-section (CSA)

AWG 26

AWG 6

Conductors for clamping (rated connection)

Clamping range, min.

0.33 mm²

Clamping range, max.

10 mm²

Type of connection

Screw connection

- 1 -

Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 / TS 35 EN combination foot

| Modular feed-through terminals

Conductors for clamping (rated connection)

2nd type of connection

Connection direction

Stripping length

screwed

on side

12 mm

M 3.5

Clamping screw

Blade size

4.0 x 0.8 mm

0.8...1.6 Nm

Tightening torque range

Torque level with DMS electric screwdriver

Gauge to IEC 60947-1

Solid, min.

Solid, max.

Stranded, min.

Flexible, min.

Flexible, max.

Flexible with ferrule, min. (DIN 46228/1)

Flexible with ferrule, max. (DIN 46228/1)

Flexible, min., ferrule with plastic collar (DIN

46228 pt 4)

0.5 mm²

10 mm²

0.5 mm²

10 mm²

0.5 mm²

6 mm²

0.5 mm²

Flexible, max., ferrule with plastic collar (DIN

46228 pt 4)

6 mm²

Twin wire-end ferrule, min.

Twin wire end ferrule, max.

AWG conductor size, min.

AWG conductor size, max.

0.5 mm²

4 mm²

AWG 22

8.37 mm²

Dimensions

Width

8 mm

Height of lowest version

Length

47.5 mm

40 mm

Disconnect terminals

Torque level with DMS electric screwdriver

Rating data

Rated cross-section

Rated voltage

Rated impulse voltage

Rated current

6 mm²

800 V

8 kV

41 A

Standards

Current with max. conductor

Pollution severity

IEC 60947-7-1

57 A

UL rating data

Voltage (UL)

600 V

Current (UL)

40 A

Min. cross-section (UL)

Max. cross-section (UL)

AWG 22

AWG 8

- 2 -

Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 / TS 35 EN combination foot

| Modular feed-through terminals

Approvals

Approvals institutes

Classifications

eClass 5.1

27-14-11-20

相关型号：