MHP650PS12 [XPPOWER]
Medical Safety Approvals;
| 型号： | MHP650PS12 |
| 厂家： | 
XP POWER LIMITED |
| 描述： | Medical Safety Approvals |
| 文件： | 总18页 (文件大小：2216K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MHP650 Series
•
•
•
•
•
•
•
•
Medical Safety Approvals
End Fan, Top Fan &U‘ ’Channel Mechanical Options
-20 ºC to +70 ºC Operation
5 V Standby
AC OK, Remote On/Off and Active Current Share
Load Dependant Variable Fan Speed
Screw Terminals
3 Year Warranty
The MHP650 AC-DC power supply provides upto 650 W of output power in three mechanical packages to provide installation
flexibility in a range of medical applications.
The unit comprises of a main output with voltages from 12-48 VDC and two peripheral outputs providing a 12 VDC fan supply and a
5 VDC standby supply which can be utilitsed with the signals and control features of the unit to provide detection of loss of AC input
and remote on/off control.
Multiple units can used in parallel via the current share facility, providing higher power solutions. Inherently low earth leakage current,
and conducted EMC compliance to Class B also simplify higher power system design.
Packaged in a compact 8” (203 mm) x 4” (102 mm) x 2.6” (65 mm) and carrying IEC60601 family safety approvals, the MHP650 has
a load dependant variable speed fan, is fully protected with overtemperature shutdown and provides full power from -20 ºC to 50 ºC
and 50% power at +70 ºC.
xppower.com
Models and Ratings
End Fan Models (-EF)
Max Output
Output Voltage V1
Fan Supply V2
Standby Supply V3
Max Output Power
Model Number
Current V1
50.0 A
40.0 A
27.0 A
23.0 A
18.0 A
12 V
15 V
24 V
28 V
36 V
48 V
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
5 V / 0.2 A
5 V / 0.2 A
5 V / 0.2 A
5 V / 0.2 A
5 V / 0.2 A
5 V / 0.2 A
607 W
607 W
657 W
651 W
657 W
657 W
MHP650PS12-EF
MHP650PS15-EF
MHP650PS24-EF
MHP650PS28-EF
MHP650PS36-EF
MHP650PS48-EF
13.5 A
Top Fan Models (-TF)
Max Output
Output Voltage V1
Fan Supply V2
Standby Supply V3
Max Output Power
Model Number
Current V1
50.0 A
40.0 A
27.0 A
23.0 A
18.0 A
12 V
15 V
24 V
28 V
36 V
48 V
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
5 V / 0.2 A
5 V / 0.2 A
5 V / 0.2 A
5 V / 0.2 A
5 V / 0.2 A
5 V / 0.2 A
607 W
607 W
657 W
651 W
657 W
657 W
MHP650PS12-TF
MHP650PS15-TF
MHP650PS24-TF
MHP650PS28-TF
MHP650PS36-TF
MHP650PS48-TF
13.5 A
U Channel Models
Max Output
Current V1
50.0 A
40.0 A
27.0 A
23.0 A
18.0 A
13.5 A
Output Voltage V1
Fan Supply V2
Standby Supply V3
Max Output Power(1)
Model Number
12 V
15 V
24 V
28 V
36 V
48 V
12 V / 0.5 A
12 V / 0.5 A
12 V / 0.5 A
12 V / 0.5 A
12 V / 0.5 A
12 V / 0.5 A
5 V / 0.2 A
5 V / 0.2 A
5 V / 0.2 A
5 V / 0.2 A
5 V / 0.2 A
5 V / 0.2 A
601 W
601 W
651 W
655 W
651 W
651 W
MHP650PS12
MHP650PS15
MHP650PS24
MHP650PS28
MHP650PS36
MHP650PS48
1. U Channel models require a minimum of 5.5 ms airflow from the system for cooling
Input Characteristics
Characteristic
Input Voltage - Operating
Input Frequency
Minimum
Typical
115/230
50/60
Maximum
Units
VAC
Hz
Notes & Conditions
Derate output power < 90 VAC. See fig. 1.
85
47
264
63
>
Power Factor
0.9
EN61000-3-2 class A compliant
115/230 VAC
115/230 VAC
230 VAC cold start, 25 °C
115/230 VAC/50 Hz (Typ.), 264 VAC/60 Hz (Max.)
Input Current - No Load
Input Current - Full Load
Inrush Current
Earth Leakage Current
Input Protection
0.15/0.3
6.5/3.2
A
A
A
40
250
90/175
μA
T16 A / 250 V internal fuse in both line and neutral
Input Derating Curve
Figure 1
100
90
80
70
60
50
40
85
90
264
Input Voltage (VAC)
2
xppower.com
Output Characteristics
Characteristic
Minimum
Typical
Maximum
Units
VDC
%
%
A
s
ms
%
%
%
Notes & Conditions
See Models and Ratings table
50% load, 115/230 VAC
Output Voltage - V1
Initial Set Accuracy
Output Voltage Adjustment
Minimum Load
Start Up Delay
Hold Up Time
Drift
Line Regulation
Load Regulation
12
48
,
(V1)
(V3)
1
5
10
V1 only. See mechanical details.
0
0.5
230 VAC full load
20
0.2
0.5
,
After 20 min warm up
90-264 VAC
0-100% load.
(V1)
(V3)
1
5
Recovery within 1% in less than 500 μs
for a 50-75% and 75-50% load step
V1: 20 MHz bandwidth
Vnom DC. Output 1 only, recycle input to reset
Output 1 only, auto reset. See fig 2.
Auto Recovery, hiccup mode
Transient Response - V1
4
1
140
145
%
Ripple & Noise
Overvoltage Protection
Overload Protection
Short Circuit Protection
Temperature Coefficient
Overtemperature Protection
% pk-pk
%
% I nom
115
110
0.02
%/˚C
°C
Protects unit from overtemperature. Auto reset.
Output Overload Characteristic
Unit enters
hiccup mode
Figure 2
Typical V1 Overload Characteristic (MHP650PS12 shown)
3
xppower.com
General Specifications
Characteristic
Minimum
Typical
84
Maximum
Units
%
Notes & Conditions
See fig 3 & 4
Efficiency
4000
1500
500
VAC
VAC
VDC
kHz
Isolation: Input to Output
Input to Ground
Output to Ground
Switching Frequency
Power Density
70/200
260
PFC converter / Main converter
3
8.2
W/in
Mean Time Between Failure
Weight
kHrs
MIL-HDBK-217F at 25 °C GB
See mechanical details
2.8 (1.25)
lb (kg)
Efficiency vs Load
MHP650PS12
Figure 3
MHP650PS48
Figure 4
Signals & Control
Characteristic
Notes & Conditions
Signals & Control
Remote Sense
Compensates for 0.5 V total voltage drop
Open collector referenced to negative sense, transistor normally off when AC is good (see fig. 5 & 8)
AC OK: Provides ≥ 5 ms warning of loss of output from AC failure
AC OK / Power Fail
Remote On/Off (Inhibit/Enable)
Uncommited isolated optocoupler diode, powered diode inhibits both V1 & V2 (fan supply) (see fig.6 & 9)
When more than one unit (with the same output voltage) is used in parallel to increase output current, the
current share pins 5/6 of one unit should be connected to pins 5/6 of the other unit(s). This will force the
current to share between the outputs. Similarly pins 2/4 of each unit should also be connected as a ground
reference. Units share current within 10% of each other at full load. See fig 7.
Current Share
Standby Supply V3
Isolated 5 V/0.2 A supply, always present when AC supplied.
4
xppower.com
Signals & Control
AC OK/Power Fail
Figure 5
POWER SUPPLY
Max 12 V 20 mA
5 V Standby
Pin 9
330R
AC OK Collector
Pin 3
Transistor On (<0.8 V):
AC NOT OK
Transistor Off (>4.5 V):
AC OK
AC OK Emitter
Pin 2 (-sense)
5 V Standby
Return Pin 10
J3 Logic Connector
Remote On/Off (Inhibit)
Figure 6
INHIBIT HI
INHIBIT LOW
800 R
POWER SUPPLY
POWER SUPPLY
800 R
5 V Standby
Pin 9
5 V Standby
Pin 9
2-5 mA
100 R
2-5 mA
100 R
Inhibit Hi
Pin 7
Inhibit Hi
Pin 7
Inhibit Lo
Pin 8
Inhibit Lo
Pin 8
5 V Standby
Return Pin 10
5 V Standby
Return Pin 10
Chassis J3 Logic Connector
Chassis J3 Logic Connector
Signal High: Power Supply OFF
Low or Floating: Power Supply ON
Signal
High: Power Supply ON
Low or Floating: Power Supply OFF
Signals - Parallel Load & Current Share Connection Example
MHP650PSXX (1)
V1 Output
MHP650PSXX (2)
V1 Output
MHP650PSXX (3)
V1 Output
-
+
-
+
-
+
Current
Share
Current
Share
Figure 7
-
+
Load
5
xppower.com
Parallel AC OK Connection
Power Supply (1)
5 V Standby
Pin 9
330R
AC OK Collector
Pin 3
AC OK Emitter
Pin 2
5 V Standby
Return Pin 10
J2 Connector
Power Supply (2)
OK Collector
Pin 3
Figure 8
OK Emitter
Pin 2
J2 Connector
Power Supply (3)
AC OK
Collector
Pin 3
Transistor On (<0.8 V): AC OR DC OK
Transistor Off (>4.5 V): AC OR DC NOT OK
AC OK Emitter
Pin 2
J2 Connector
Parallel Remote Inhibit Connection
PSU 8
PSU 1
PSU 2
Open or TTL high = PSU On
Short circuit or TTL Low = PSU Off
Pin 7
Pin 7
Pin 7
Pin 8
Figure 9
Pin 8
Pin 8
6
xppower.com
Environmental
Characteristic
Minimum
Typical
Maximum
Units
Notes & Conditions
Derate linearly from +50 °C at 2.5%/°C
to 50% at 70 °C. See fig 10.
Operating Temperature
-20
+70
°C
Some specification parameters maybe exceeded until
after 20 minutes warm up period.
Low Temperature Start Up
-40
-40
°C
°C
Storage Temperature
Cooling
+85
Integral variable speed fan load dependant.
See fig 11.
Humidity
Operating Altitude
5
95
3000
%RH
m
Non-condensing
3 x 30 g/11 ms shocks in both +ve & -ve
directions along the 3 orthogonal axis, total 18
shocks.
Shock
Vibration
Single axis 10-500 Hz at 2 g x 10 sweeps
Temperature Derating Curve
Figure 10
100
90
80
70
60
50
40
30
20
10
0
-20
0
+20
+40
+50
+60
+70
Ambient Temperature (ºC)
Fan Speed Control
100
Figure 11
50
0
0
25
50
75
100
Output Power (%)
Electromagnetic Compatibility - Immunity
Phenomenon
Harmonic Current
ESD
Radiated
EFT
Surges
Conducted
Magnetic
Standard
Test Level
Criteria
Notes & Conditions
EN61000-3-2
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
Class A
3
3
3
A
A
A
A
A
A
A
B
Installation class 3
3
3
Dip: 30% 10 ms
Dip: 60% 100 ms
EN61000-4-11
Dip: 100% 5000 ms
Dip: 30% 500 ms
B
A
Dips and Interruptions
115 VAC input requires 50% load
derating otherwise criteria B
Dip: 60% 100 ms
A
EN60601-1-2
Dip: 100% 10 ms
Dip: 100% 5000 ms
A
B
7
xppower.com
Electromagnetic Compatibility - Emissions
Phenomenon
Conducted
Radiated
Standard
Test Level
Level B
Level A
Criteria
Notes & Conditions
EN55022 / EN55011
EN55022 / EN55011
EN61000-3-3
Voltage Fluctuations
Safety Agency Approvals
Safety Agency
Safety Standard
Category
Medical
Medical
Medical
CB Report
UL
TUV
Certificate #US/17354/UL, IEC60601-1 Ed 3 Including Risk Management
UL File # E146893, ANSI/AAMI ES 60601-1:2005 & CSA C22.2 No. 60601-1:08
TUV Certificate # B11 09 57396 110, EN60601-1:2006
LVD
CE
Means of Protection
2 x MOPP (Means of Patient Protection)
1 x MOPP (Means of Patient Protection)
Category
Primary to Secondary
Primary to Earth
IEC60601-1 Ed 3
Equipment Protection Class
Safety Standard
Notes & Conditions
See safety agency conditions of
acceptibility for details
Class I
IEC60601-1 Ed 3
Mechanical Details - End Fan (Suffix -EF)
Standard Terminal Block, M4 Screw, 6 Pins, 9.5 mm Center
torque 10.62 lbs-in (1.2 Nm)
Standard Terminal
Block, M3.5 Screw 3
Pins 9.5 mm Center
torque 10.62 lbs-in (1.2 Nm)
L
E
N
2.49
(63.3)
V1 Adjustment
Output On, LED
9.18 (233.2)
2.50 (63.5)
2 x M3 THD both side faces
0.15 (3.8) max screw penetration
AIRFLOW
Pin 2
Pin 1
max torque 4.0-5.0 lbs-in (0.45-0.57 Nm)
1.95
(49.5)
Pin 10
Pin 9
J3: Logic Connector
8.00 (203.2)
J2 Logic Connector
(JST B10B-PHDSS)
2.86 (72.6)
Pin
1
Function
+ Sense
2
- Sense
3
4
AC OK/Power Fail
- Sense
4.00
(101.6)
C
L
5
6
7
Current Share
Current Share
+ Inhibit
4 x M3 THD
0.15 (3.8) max screw penetration
max torque 4.0-5.0 lbs-in (0.45-0.57 Nm)
8
9
10
- Inhibit
+5V Standby (V3)
5V Standby Return (V3)
0.87
(22.2)
6.53 (165.8)
Notes:
1. Dimensions shown in inches (mm).
2. Weight: 2.8 lb (1.25 kg).
3. J2 Mating plug: JST part no. PHDR-10VS, contact: 26-22 AWG JST part no.
SPHD-001T-P0.5.
8
xppower.com
Mechanical Details - Top Fan (Suffix -TF)
Standard Terminal Block, M3.5 Screw 3, Pins 9.5 mm Center
torque 10.62 lbs-in (1.2 Nm)
Standard Terminal Block, M4 Screw, 6 Pins, 9.5 mm Center
torque 10.62 lbs-in (1.2 Nm)
L
E
N
V1 Adjustment
Output On, LED
2.50 (63.5)
2.58 (65.5)
8.00 (203.2)
Pin 2
Pin 1
pin 9
2 x M3 THD both side faces
0.15 (3.8) max screw penetration
max torque 4.0-5.0 lbs-in (0.45-0.57 Nm)
1.95
(49.5)
Pin 10
J3: Logic Connector
2.86 (72.6)
4.00
(101.6)
4 x M3 THD
0.15 (3.8) max screw penetration
max torque 4.0-5.0 lbs-in (0.45-0.57 Nm)
0.87
(22.2)
6.53 (165.8)
J2 Logic Connector
(JST B10B-PHDSS)
Function
Pin
1
+ Sense
2
- Sense
3
4
AC OK/Power Fail
- Sense
5
6
7
Current Share
Current Share
+ Inhibit
8
- Inhibit
9
+5V Standby (V3)
10 5V Standby Return (V3)
Notes:
1. Dimensions shown in inches (mm).
2. Weight: 2.6 lb (1.2 kg).
3. J2 Mating plug: JST part no. PHDR-10VS, contact: 26-22 AWG JST part no.
SPHD-001T-P0.5.
9
xppower.com
Mechanical Details - U Channel (No Suffix)
Standard Terminal Block
Standard Terminal Block, M4 Screw 6 Pins 9.5 mm Center
torque 10.62 lbs-in (1.2 Nm)
M3.5 Screw 3 Pins 9.5 mm Center
torque 10.62 lbs-in (1.2 Nm)
L
E
N
V1 Adjustment
Output On, LED
8.00 (203.2)
2.46 (62.5)
Pin 2
Pin 1
2 x M3 THD both side faces
0.15 (3.8) max screw penetration
max torque 4.0-5.0 lbs-in (0.45-0.57 Nm)
Pin 10
Pin 9
J3: Logic Connector
System Airflow
Required
1.95
(49.5)
Pin 1
J1: Fan Connector
J2 Logic Connector
(JST B10B-PHDSS)
Function
Pin
1
+ Sense
4.00
2
3
4
- Sense
AC OK/Power Fail
- Sense
(101.6)
C
L
2.86
(72.6)
5
6
7
Current Share
Current Share
+ Inhibit
0.87
(22.2)
8
9
- Inhibit
+5V Standby (V3)
4 x M3 THD
0.15 (3.8) max screw penetration
max torque 4.0-5.0 lbs-in (0.45-0.57 Nm)
6.53 (165.80)
10 5V Standby Return (V3)
J1 Fan Connector
(JST B2B-PH-KL (LF) (SN)
Notes:
Pin
1
Function
1. Dimensions shown in inches (mm).
2. Weight: 2.4 lb (1.1 kg).
3. Requires system airflow, see thermal considerations.
4. J1 Mating plug: JST part no. PHR-2, contact: JST part no.
SPH-002T-P0.5S.
5. J2 Mating plug: JST part no. PHDR-10VS, contact: 26-22
AWG JST part no. SPHD-001T-P0.5.
+V
-V
2
Thermal Considerations (U Channel)
Temperature Measurements (Ambient ≤50 ºC)
Recommended
Temperature ºC
Maximum
Temperature ºC
In order to ensure reliable operation in the end use application the
recommended component temperatures listed should not be exceeded.
Higher temperatures up to the maximum stated can be used but
product lifetime may be reduced.
Component
C55 Capacitor
T302 Transformer
C314 Capacitor
D311 Diode
70
90
70
105
120
105
120
100
10
26-Aug-14
MHP1000 Series
•
•
•
•
•
•
•
•
1200 W High Line Output Power
Rugged Industrial Construction
Variable Speed Fan for Noise Reduction
-40 °C to +70 °C Operation
5 V Standby
AC OK, Remote On/Off and Active Current Share
Screw Terminals
3 Year Warranty
The MHP1000 AC-DC power supply provides upto 1200 W of output power in a compact rugged mechanical package, suitable for a
range of medical applications.
The unit comprises of a main output with voltages from 12-48 VDC and a 5 VDC standby supply which can be utilitsed with the
signals and control features of the unit to provide detection of loss of AC input and remote on/off control.
Multiple units can be used in parallel via the current share facility, providing higher power solutions. Inherently low earth leakage
current, and conducted EMC compliance to Class B also simplify higher power system design.
Packaged in a compact 9.5” (241 mm) x 5.9” (150 mm) x 2.4” (61 mm) and carrying IEC60601 family safety approvals, the MHP1000
has a load dependant variable speed fan is fully protected with overtemperature shutdown and provides -40 ºC start up with full
power from -20 ºC to 50 ºC and 50% power at +70 ºC.
xppower.com
Models and Ratings
Max Output Current V1
<180 VAC >180 VAC
Max Output Power
<180 VAC >180 VAC
Output Voltage V1
Standby Supply V2
Model Number
12 V
15 V
24 V
28 V
36 V
48 V
83.0 A
67.0 A
5 V / 1.0 A
5 V / 1.0 A
5 V / 1.0 A
5 V / 1.0 A
5 V / 1.0 A
5 V / 1.0 A
1001 W
1010 W
MHP1000PS12
MHP1000PS15
MHP1000PS24
MHP1000PS28
MHP1000PS36
MHP1000PS48
42.0 A
36.0 A
28.0 A
21.0 A
50.0 A
43.0 A
34.0 A
25.0 A
1013 W
1013 W
1013 W
1013 W
1200 W
1200 W
1200 W
1200 W
Input Characteristics
Characteristic
Input Voltage - Operating
Input Frequency
Minimum
Typical
115/230
50/60
Maximum
264
Units
VAC
Hz
Notes & Conditions
Derate output power < 90 VAC. See fig. 1.
85
47
63
>
Power Factor
0.9
EN61000-3-2 class A compliant
115/230 VAC
Input Current - No Load
Input Current - Full Load
(1000 W)
0.35/0.5
10.9/5.3
A
A
115/230 VAC
Inrush Current
Earth Leakage Current
Input Protection
60
250
A
μA
230 VAC cold start, 25 ºC
75/140
115/230 VAC/50 Hz (Typ.), 264 VAC/60 Hz (Max.)
T20 A/250 V internal fuse in both lines
Input Derating Curve
100
90
Figure 1
80
70
60
50
40
85
90
264
Input Voltage (VAC)
2
xppower.com
Output Characteristics
Characteristic
Minimum
Typical
Maximum
Units
VDC
%
%
A
s
ms
%
%
%
Notes & Conditions
See Models and Ratings table
50% load, 115/230 VAC
Output Voltage - V1
Initial Set Accuracy
Output Voltage Adjustment
Minimum Load
Start Up Delay
Hold Up Time
Drift
Line Regulation
Load Regulation
12
48
,
(V1)
(V2)
1
5
10
V1 only. See mechanical details.
0
0.5
230 VAC full load
20
0.2
0.5
,
After 20 min warm up
90-264 VAC
0-100% load.
(V1)
(V2)
1
5
Recovery within 1% in less than 500 μs
for a 50-75% and 75-50% load step
V1: 20 MHz bandwidth
Vnom DC. Output 1 only, recycle input to reset
Output 1 only, auto reset. See fig 2.
Auto Recovery, hiccup mode
Transient Response - V1
4
1
145
140
%
Ripple & Noise
Overvoltage Protection
Overload Protection
Short Circuit Protection
Temperature Coefficient
Overtemperature Protection
% pk-pk
%
% I nom
115
110
0.02
%/˚C
°C
Protects unit from overtemperature. Auto reset.
Output Overload Characteristic
14
12
10
8
6
4
Unit enters
2
hiccup mode
0
0
5
10
15
20
25
30
35
Output Current (A)
Figure 2
Typical V1 Overload Characteristic (MHP1000PS12 shown)
3
xppower.com
General Specifications
Characteristic
Minimum
Typical
84
Maximum
Units
%
Notes & Conditions
See fig 3 & 4
Efficiency
4000
1500
500
VAC
VAC
VDC
kHz
Isolation: Input to Output
Input to Ground
Output to Ground
Switching Frequency
Power Density
70/200/130
PFC converter / Main converter / Standby
3
8.9
W/in
Mean Time Between Failure
Weight
260
kHrs
lb (g)
MIL-HDBK-217F at 25 ºC GB
2.1 (940)
See mechanical details
Efficiency vs Load
MHP1000PS12
Figure 3
MHP1000PS48
Figure 4
Signals & Control
Characteristic
Notes & Conditions
Signals & Control
Remote Sense
Compensates for 0.5 V total voltage drop
Open collector referenced to negative sense, transistor normally off when AC is good (see fig. 5 & 8)
AC OK: Provides ≥ 5 ms warning of loss of output from AC failure
AC OK / Power Fail
Remote On/Off (Inhibit/Enable)
Uncommited isolated optocoupler diode, powered diode inhibits both V1 & V2 (fan supply) (see fig.6 & 9)
When more than one unit (with the same output voltage) is used in parallel to increase output current, the
current share pins 5/6 of one unit should be connected to pins 5/6 of the other unit(s). This will force the
current to share between the outputs. Similarly pins 2/4 of each unit should also be connected as a ground
reference. Units share current within 10% of each other at full load. See fig 7.
Current Share
Standby Supply V2
Isolated 5 V/1.0 A supply, always present when AC supplied.
4
xppower.com
Signals & Control
AC OK/Power Fail
Figure 5
POWER SUPPLY
Max 12 V 20 mA
5 V Standby
Pin 9
330R
AC OK Collector
Pin 3
Transistor On (<0.8 V): AC NOT OK
Transistor Off (>4.5 V): AC OK
AC OK Emitter
Pin 2 (-sense)
5 V Standby
Return Pin 10
J2 Logic Connector
Remote On/Off (Inhibit)
INHIBIT HI
INHIBIT LOW
Figure 6
800 R
POWER SUPPLY
POWER SUPPLY
800 R
5 V Standby
Pin 9
5 V Standby
Pin 9
2-5 mA
100 R
2-5 mA
100 R
Inhibit Hi
Pin 7
Inhibit Hi
Pin 7
Inhibit Lo
Pin 8
Inhibit Lo
Pin 8
5 V Standby
Return Pin 10
5 V Standby
Return Pin 10
Chassis J3 Logic Connector
Chassis J3 Logic Connector
Signal High: Power Supply OFF
Low or Floating: Power Supply ON
Signal
High: Power Supply ON
Low or Floating: Power Supply OFF
Signals - Parallel Load & Current Share Connection Example
MHP1000PSXX (1)
V1 Output
MHP1000PSXX (2)
V1 Output
MHP1000PSXX (3)
V1 Output
-
+
-
+
-
+
Current
Share
Current
Share
Figure 7
-
+
Load
5
xppower.com
Parallel AC OK Connection
Power Supply 1
5 V Standby
Pin 9
330R
AC OK Collector
Pin 3
AC OK Emitter
Pin 2
5 V Standby
Return Pin 10
J3 Connector
Power Supply 2
OK Collector
Pin 3
Figure 8
OK Emitter
Pin 2
J3 Connector
Power Supply 3
AC OK
Collector
Pin 3
Transistor On (<0.8 V): AC NOT OK
Transistor Off (>4.5 V): AC OK
AC OK Emitter
Pin 2
J3 Connector
Parallel Remote Inhibit Connection
PSU 8
PSU 1
PSU 2
Open or TTL high = PSU On
Short circuit or TTL Low = PSU Off
Pin 7
Pin 8
Pin 7
Pin 8
Pin 7
Pin 8
Figure 9
6
xppower.com
Environmental
Characteristic
Minimum
Typical
Maximum
Units
Notes & Conditions
Derate linearly from +50 ºC at 2.5%/ºC
to 50% at 70 ºC. See fig 10.
Operating Temperature
-20
+70
°C
Some specification parameters maybe
exceeded until after 20 minutes warm up
period.
Low Temperature Start Up
-40
-40
°C
°C
Storage Temperature
Cooling
+85
2 x integral variable speed fans
load dependant. See fig 11.
Humidity
Operating Altitude
5
95
3000
%RH
m
Non-condensing
3 x 30 g/11 ms shocks in both +ve & -ve
directions along the 3 orthogonal axis,
total 18 shocks.
Shock
Vibration
Single axis 10-500 Hz at 2 g x 10 sweeps
100
90
80
70
60
50
40
Temperature Derating Curve
Figure 10
30
20
10
0
-20
0
+20
+40
+50
+60
+70
Ambient Temperature (ºC)
Fan Speed Control
Figure 11
100
50
0
0
25
50
75
100
Output Power (%)
Electromagnetic Compatibility - Immunity
Phenomenon
Low Voltage PSU EMC
Harmonic Current
ESD
Radiated
EFT
Standard
Test Level
Criteria
Notes & Conditions
EN61204-3
High severity level
as below
EN61000-3-2
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Class A
3
3
3
A
A
A
A
A
A
A
A
B
Surges
Conducted
Installation class 3
3
Dip: 30% 25 AC Cycles
Dip: 60% 5 AC Cycles
Dip: 100% 0.5 AC Cyles
Int: >95% 5000 ms
230 VAC 100% load, 100 VAC 50% load
Dips and Interruptions
EN60601-1-2
7
xppower.com
Electromagnetic Compatibility - Emissions
Phenomenon
Conducted
Radiated
Standard
EN55011/22
EN55011/22
EN61000-3-3
Test Level
Class B
Class A
Criteria
Notes & Conditions
Voltage Fluctuations
Safety Agency Approvals
Safety Agency
CB Report
UL
Safety Standard
Category
Medical
Medical
Medical
Certificate #US/18260/UL, IEC60601-1 Ed 3 Including Risk Management
UL File # E146893, ANSI/AAMI ES 60601-1:2005 & CSA C22.2 No. 60601-1:08
TUV EN60601-1:2006
TUV
Means of Protection
Category
Primary to Secondary
Primary to Earth
2 x MOPP (Means of Patient Protection)
1 x MOPP (Means of Patient Protection)
IEC60601-1 Ed 3
Equipment Protection Class
Safety Standard
Notes & Conditions
See safety agency conditions of
acceptability for details
Class I
IEC60601-1 Ed 3
Mechanical Details
Standard Terminal Block, M6 Screw, 4 Pins 0.62 (16.0) center
Torque 26.0 lbs-in (2.94 Nm)
5.90
(149.8)
2.91
(73.9)
Output On, LED
V1 Adjustment
A
N
L
1.47
(37.4)
2.40 (61.0)
9.48 (240.9)
1.20 (30.5)
9.55 (242.64)
Standard Terminal Block, M4 Screw
3 Pins 0.37 (9.5) center
Torque 10.62 lbs-in (1.2 Nm)
9.41 (238.9)
4 x M4-0.7 THD both side faces
0.15 (3.8) max screw penetration
max torque 10.62 lbs-in (1.2 Nm)
J3 Logic Connector
(JST B10B-PHDSS)
B
B
Airflow
Pin
1
Function
+ Sense
1.20 (30.5)
2
- Sense
3
4
5
6
AC OK/Power Fail
- Sense
Current Share
Current Share
+ Inhibit
4 x M4-0.7 THD both side faces
0.15 (3.8) max screw penetration
max torque 10.62 lbs-in (1.2 Nm)
7
B
B
8
- Inhibit
9
10
+5 V Standby
-5 V Standby
4.50
(114.3)
C
L
Pin 1
Pin 9
Pin 2
Pin 10
B
B
Detail A J3: Logic Connector
6.70 (170.2)
1.33 (33.8)
Notes:
1. Dimensions shown in inches (mm).
2. Weight: 2.8 lb (1.25 kg).
3. J3 Mating plug: JST part no. PHDR-10VS, contact: 26-22 AWG JST part no.
SPHD-001T-P0.5.
8
22-Feb-13
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明