MPS-120-24 [XPPOWER]

1~4 Output Medical Type; 1 〜 4输出医用型
MPS-120-24
型号: MPS-120-24
厂家: XP POWER LIMITED    XP POWER LIMITED
描述:

1~4 Output Medical Type
1 〜 4输出医用型

文件: 总3页 (文件大小:291K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
1~4 Output Medical Type  
120W Medical series  
Features  
Universal AC input / Full range  
Low leakage current <180 A  
Protections:Short circuit/Over load/Over voltage  
UL60601-1 medical safety approved  
With power good and fail signal output (Optional)  
100% full load burn-in test  
Fixed switching frequency at 45KHz  
3 years warranty  
IEC60601-1  
Specification  
AC INPUT VOLTAGE  
90~264 VAC, 47~440Hz / 127~370VDC.  
TEMP. COEFFICIENT  
0.04%/ on all outputs at full load between 0~50 of ambient temperature.  
AC INPUT CURRENT (Typ.)  
Maximum input current 2.9A at 115VAC, 60Hz or  
1.7A at 230VAC, 60Hz with 100% output load.  
VIBRATION  
2G of acceleration, vibrating frequency adjust from 10Hz ~500Hz within a  
10-minute cycle. 6 testing cycles (60 minutes) each along X, Y, Z axes.  
INRUSH CURRENT (Typ.)  
SAFETY STANDARDS  
Medical : UL60601-1, TUV EN60601-1 approved  
Commercial : Also design refer to UL60950-1, TUV EN60950-1  
Inrush current is less than 22A at 115VAC or less than  
45A at 230VAC under cold start conditions. Limiting  
provided by internal thermistors.  
WITHSTAND VOLTAGE  
SETUP, RISE TIME  
MPS-120:  
4000VAC between input and output  
1500VAC between input and F.G.  
500VAC between output and F.G.  
800ms, 20ms / 230VAC at full load  
2000ms, 50ms / 115VAC at full load  
MPD,T,Q-120:500ms, 20ms / 230VAC at full load  
1200ms, 50ms / 115VAC at full load  
ISOLATION RESISTANCE  
>100M Ohms for I/P-O/P, I/P-FG, O/P-FG by using 500VDC test voltage.  
HOLD-UP TIME (Typ.)  
80ms / 230VAC at full load  
14ms / 115VAC at full load  
EMI COMPLIANCE  
EMI Specifications  
Conducted & Radiation  
Compliance Level  
EN55011, Class B  
EN55022, Class B  
EN61000-3-2  
LEAKAGE CURRENT  
Leakage current is less than 180 A at 264VAC  
Harmonic distortion  
Voltage flicker  
EN61000-3-3  
DC OUTPUT ADJ. RANGE  
DC output voltage (or Ch1 of multiple output models)  
can be adjusted between -5%~+10% rated output  
voltage by potential meter.  
EMS COMPLIANCE  
EMS Specification  
ESD air  
ESD contact  
RF field susceptibility  
Compliance Level  
EN61000-4-2, Level 3, 8KV  
EN61000-4-2, Level 2, 4KV  
EN61000-4-3, Level 2, 3V/m  
Level 3, 10V/m  
EN61000-4-4, Level 2, 1KV/5KHz  
Level 3, 2KV/5KHz  
OVER LOAD PROTECTION  
Fully protected against short circuit and output overload.  
The hiccup type protection will be activated at 110~150%  
(For MPD,T,Q-120),120~160%(For MPS-120) rated load  
and recovers automatically after fault condition is removed.  
EFT(Electrical Fast Transient)/Burst  
Lightning/Surge  
EN61000-4-5, Level 4, 2KV/Line-Line  
4KV/Line-Earth  
OVER VOLTAGE PROTECTION  
EN61000-4-6, Level 2, 3Vrms/m  
Level 3, 10Vrms/m  
EN61000-4-8, Level 2, 3A/m  
Level 3, 10A/m  
Conducted RF susceptibility  
Magnetic field immunity  
Provided on output channel 1 only at 115%~135%  
rated output voltage. (120%~140% for MPS-120-15/24/48).  
Output will be shut down when this protection is activated.  
EN61000-4-11,Compliance  
ENV50204, Level 2, 3V/m, 900MHz  
Level 3, 10A/m, 900MHz  
Voltage dip, interruption  
Digital phone carrier immunity  
POWER GOOD / FAIL SIGNAL (OPTIONAL)  
TTL logic high for power good and TTL low for  
power fail. When the output voltage reaches 90% of  
rated value, a +5V TTL signal will be sent out with a  
10~500ms delay; At least 1ms before the output  
voltage goes below 90% of the rated value, the TTL  
signal will be turned off.  
MTBF  
262,100 hours min. at full load and 25 of ambient temperature,  
calculated per MIL-HDBK-217F.  
DIMENSION (L*W*H)  
177.8x107.95x35.5mm or 7"x4.25"x1.4"  
* MPS-120-3.3 does not have this optional function.  
WORKING TEMP.  
Whole series can operate from -20~70 . Please refer  
to the derating curves.  
PACKING  
0.55Kg; 24pcs/14.5Kg/1.04CUFT  
WORKING HUMIDITY  
20~90% RH non-condensing.  
STORAGE TEMP., HUMIDITY  
-40~+85 , 10~90% RH  
File Name:120W MEDICAL-SPEC 2006-04-13  
1~4 Output Medical Type  
120W Medical series  
Output Chart  
OUTPUT CURRENT  
RIPPLE & NOISE  
(Max.)  
VOLTAGE  
TOLERANCE  
(Note 3)  
OUTPUT RATED  
VOLTAGE CURRENT  
LINE  
LOAD  
PEAK LOAD  
WITH 25CFM FAN  
(Note 4)  
MODEL  
EFFICIENCY  
MINIMUM  
LOAD  
WITH FAN  
(25CFM)  
REGULATION REGULATION  
CONVECTION  
(max.)  
(Note 2)  
MPS-120-3.3 3.3V  
24A  
22A  
10A  
8A  
0A  
0A  
0A  
0A  
0A  
0A  
16A  
24A  
22A  
10A  
8A  
26A  
26A  
11A  
80mVp-p  
80mVp-p  
100mVp-p  
100mVp-p  
120mVp-p  
120mVp-p  
3.0%  
3.0%  
2.0%  
2.0%  
2.0%  
2.0%  
1.0%  
1.0%  
1.0%  
1.0%  
1.0%  
1.0%  
3.0%  
3.0%  
2.0%  
2.0%  
2.0%  
2.0%  
68%  
73%  
77%  
79%  
81%  
82%  
MPS-120-5  
MPS-120-12  
MPS-120-15  
MPS-120-24  
MPS-120-48  
5V  
14.7A  
6.7A  
5.3A  
3.3A  
1.7A  
12V  
15V  
24V  
48V  
8.8A  
5.5A  
2.8A  
5A  
5A  
2.5A  
2.5A  
MPD-120A  
MPD-120B  
5V  
10A  
5A  
2A  
7.3A  
3.6A  
7A  
10A  
5A  
12A  
6A  
80mVp-p  
120mVp-p  
80mVp-p  
250mVp-p  
2.0%  
7.0%  
2.0%  
8.0%  
0.5%  
2.0%  
0.5%  
2.0%  
0.5%  
3.5%  
0.5%  
4.0%  
75%  
76%  
12V  
5V  
0.5A  
2A  
10A  
2.9A  
10A  
2.9A  
12A  
3.2A  
24V  
0.3A  
1.9A  
MPT-120A  
MPT-120B  
MPT-120C  
MPT-120D  
5V  
10A  
4.8A  
0.6A  
10A  
4.4A  
0.6A  
10A  
4A  
2A  
7.3A  
3.5A  
0.3A  
7.3A  
3.2A  
0.4A  
7A  
10A  
4.8A  
0.6A  
10A  
4.4A  
0.6A  
10A  
4A  
12A  
5.8A  
1A  
80mVp-p  
120mVp-p  
80mVp-p  
80mVp-p  
120mVp-p  
80mVp-p  
80mVp-p  
150mVp-p  
80mVp-p  
80mVp-p  
300mVp-p  
120mVp-p  
2.0%  
+8,-6%  
5.0%  
0.5%  
1.5%  
0.5%  
0.5%  
1.5%  
0.5%  
0.5%  
2.0%  
0.5%  
0.5%  
3.0%  
0.5%  
1.0%  
3.5%  
1.0%  
1.0%  
3.5%  
1.0%  
1.0%  
3.5%  
1.0%  
1.0%  
+4,-3%  
1.0%  
12V  
-5V  
5V  
0.4A  
0A  
72%  
73%  
72%  
74%  
2A  
12A  
5.3A  
1A  
2.0%  
12V  
-12V  
5V  
0.4A  
0A  
6.0%  
5.0%  
2A  
11A  
4.4A  
1A  
2.0%  
15V  
-15V  
5V  
0.4A  
0A  
2.6A  
0.4A  
7.3A  
1.6A  
0.4A  
+6,-7%  
5.0%  
0.6A  
10A  
2.2A  
0.6A  
0.6A  
10A  
2.2A  
0.6A  
2A  
12A  
2.64A  
1A  
2.0%  
24V  
12V  
0.4A  
0A  
+8,-6%  
5.0%  
MPQ-120B  
MPQ-120C  
MPQ-120D  
MPQ-120E  
5V  
10A  
4.2A  
0.6A  
0.6A  
10A  
3.2A  
0.6A  
0.6A  
10A  
1A  
2A  
7.3A  
3.1A  
0.4A  
0.4A  
7.3A  
2.4A  
0.4A  
0.4A  
7A  
10A  
4.2A  
0.6A  
0.6A  
10A  
3.2A  
0.6A  
0.6A  
10A  
1A  
11A  
5A  
80mVp-p  
120mVp-p  
80mVp-p  
80mVp-p  
80mVp-p  
150mVp-p  
80mVp-p  
80mVp-p  
80mVp-p  
150mVp-p  
300mVp-p  
80mVp-p  
80mVp-p  
120mVp-p  
80mVp-p  
80mVp-p  
2.0%  
6.0%  
5.0%  
5.0%  
2.0%  
+6,-7%  
5.0%  
5.0%  
2.0%  
+8,-6%  
8.0%  
5.0%  
2.0%  
6.0%  
8.0%  
5.0%  
0.5%  
1.5%  
0.5%  
0.5%  
0.5%  
2.0%  
0.5%  
0.5%  
0.5%  
2.0%  
2.0%  
0.5%  
0.5%  
2.0%  
2.0%  
0.5%  
0.5%  
3.5%  
1.0%  
1.0%  
0.5%  
3.5%  
1.0%  
1.0%  
0.5%  
3.5%  
3.5%  
1.0%  
0.5%  
3.0%  
3.0%  
1.0%  
12V  
-5V  
-12V  
5V  
0.5A  
0A  
71%  
71%  
74%  
73%  
1A  
0A  
1A  
2A  
11A  
3.8A  
1A  
15V  
-5V  
-15V  
5V  
0.5A  
0A  
0A  
1A  
2A  
11A  
1.1A  
2.3A  
1A  
12V  
24V  
-12V  
5V  
0.2A  
0.3A  
0A  
0.7A  
1.4A  
0.3A  
7.3A  
2.3A  
0.4A  
0.4A  
2.1A  
0.6A  
10A  
3A  
2.1A  
0.6A  
10A  
3A  
2A  
11A  
3.3A  
1A  
12V  
15V  
24V  
0.5A  
0A  
0.6A  
0.6A  
0.6A  
0.6A  
0A  
1A  
Notes :  
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.  
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 f & 47 f parallel capacitor.  
3. Tolerance : includes set up tolerance, line regulation and load regulation.  
4. 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power.  
5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets  
EMC directives.  
File Name:120W MEDICAL-SPEC 2006-04-13  
1~4 Output Medical Type  
120W Medical series  
Mechanical Specification  
Unit:mm  
177.8[7"]  
165.1 [6.5"]  
CN1  
5
4
3
2
1
13  
12  
11  
10  
9
8
7
6
5
4
3
2
1
+V ADJ  
CN2  
4- 3.96[0.156"]  
FAN  
Pin Assignment  
AC Intput Connector (CN1) : Molex 5273-05 or equivalent  
Pin No.  
MPS-120  
FG  
MPD-120  
FG  
MPT-120  
FG  
MPQ-120  
FG  
Mating Housing  
Terminal  
1
2,4  
3
No Pin  
AC/N  
No Pin  
AC/N  
No Pin  
AC/N  
AC/L  
No Pin  
AC/N  
Molex 5195  
or equivalent  
Molex 5194  
or equivalent  
5
AC/L  
AC/L  
AC/L  
DC Output Connector (CN2) : Molex 5273-13 or equivalent  
Pin No.  
MPS-120  
+V  
MPD-120  
V1  
MPT-120  
V1  
MPQ-120  
V1  
Mating Housing  
Terminal  
1
2
+V  
V1  
V1  
V1  
3
+V  
V1  
V1  
V1  
4
-V  
COM  
COM  
COM  
COM  
V2  
COM  
COM  
COM  
COM  
V2  
COM  
COM  
COM  
COM  
V2  
5
-V  
6
-V  
Molex 5195  
or equivalent  
Molex 5194  
or equivalent  
7
-V  
8
+V  
9
+V  
V2  
V2  
V2  
10  
11  
12  
13  
P.F.D.  
NC  
P.F.D.  
NC  
P.F.D.  
V3  
P.F.D.  
V3  
No Pin  
NC  
No Pin  
NC  
No Pin  
NC  
No Pin  
V4  
Derating Curve  
Static Characteristics  
100  
90  
80  
70  
60  
50  
40  
100  
25CFM forced air cooling  
80  
MPS/D-120  
Convection cooling  
53W MPS-120-3.3 only  
73.7W MPS-120-5 only  
80W others  
60  
40  
MPT/Q-120  
20  
-20  
0
10  
20  
30  
40  
50 55 60  
70 (HORIZONTAL)  
90  
100  
115  
135  
155  
230 264  
AMBIENT TEMPERATURE (  
)
INPUT VOLTAGE (V) 60Hz  
File Name:120W MEDICAL-SPEC 2006-04-13  

相关型号:

MPS-120-3.3

120W 1~4 Output for Medical Type
ASTRODYNE

MPS-120-3.3

1~4 Output Medical Type
XPPOWER

MPS-120-3.3

1~4 Output Medical Type
MEANWELL

MPS-120-48

120W 1~4 Output for Medical Type
ASTRODYNE

MPS-120-48

1~4 Output Medical Type
XPPOWER

MPS-120-48

1~4 Output Medical Type
MEANWELL

MPS-120-5

120W 1~4 Output for Medical Type
ASTRODYNE

MPS-120-5

1~4 Output Medical Type
XPPOWER

MPS-120-5

1~4 Output Medical Type
MEANWELL

MPS-150A

Uncompensated, Absolute Pressure Sensor
JLWORLD

MPS-160TSNP0

POSITION SENSORS
SICK

MPS-172208-82

Narrow Band Medium Power Amplifier, 1900MHz Min, 2000MHz Max, 1 Func, GAAS, 10 PIN
IXYS