SIP90 [XPPOWER]
REGULATED, LOW RIPPLE HIGH VOLTAGE DC TO DC CONVERTERS;
| 型号： | SIP90 |
| 厂家： | 
XP POWER LIMITED |
| 描述： | REGULATED, LOW RIPPLE HIGH VOLTAGE DC TO DC CONVERTERS 高压 |
| 文件： | 总4页 (文件大小：646K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SIP SERIES
REGULATED, LOW RIPPLE HIGH VOLTAGE DC TO DC CONVERTERS
90V @ 0.1W and 100V @ 1W
PRODUCT SELECTION TABLE
MAXIMUM
OUTPUT
MODEL
OUTPUT
VOLTAGE
CURRENT
SIP 90 – 0.1W
SIP 100 – 1W
<25 – 90V
0 to 1 mA
<25 – 100V
0 to 10 mA
PRODUCT DESCRIPTION
FEATURES
• Low Ripple
• Well Regulated
Ideal for APD biasing and MEMS driver applications, the SIP Series
provides high performance in an ultra-thin, miniature single in-line
package. Designed for low cost, high quantity applications, these
DC to DC converters deliver high stability with very low ripple. The
output voltage is programmable via a 0 to 5 volt analog voltage.
The output voltage is inversely related to the programming voltage,
i.e. applying 5 volts to the programming sets the output voltage to
the minimum level. Conversely, 0 volts on the programming sets the
output voltage to the maximum level. The supply is linearly program-
mable through this range*2. An enable/disable function is included.
Applying a TTL Low (open collector compatible) disables the output
voltage to less than 10 volts.
• Analog Programming Voltage
• Ultra-Thin, 0.16 inches (4mm)
• High Performance Low Cost
• MTBF: >2.03 million hours per Bellcore TR-332
• Packaging: Epoxy Coated
• RoHS Compliant
APPLICATIONS
•
•
•
•
•
•
•
Photomultiplier Tubes
Mass Spectrometers
Avalanche Photodiode
Microchannel Plates
Piezo Materials
Igniters
Capacitor Charging
BLOCK DIAGRAM
WWW.XPPOWER.COM
4760W02
PAGE 1
SIP SERIES
ELECTRICAL SPECIFICATIONS*2 (25 to 100VDC)
MODEL
SIP90
SIP100
Output Voltage
Max Output Current*1
<25 to 90VDC
0 to 1mA
<5mV
<25 to 100VDC
0 to 10mA
<10mV
Ripple P-P
Input Voltage
3 to 6.7VDC
<125mA
<150mA
0.05%
4 to 6.7VDC
<75mA
Input Current [No load]
Input Current [Full load]
Line Regulation
Load Regulation
Programming Voltage
Programming Accuracy
Frequency
<350mA
0.20%
0.03%
0.10%
See Below
91 +/-1
—
2MHz +/- 5%
< 0.01%/hr [1hr warm up]
<100ppm / deg C
Stability
Tempco
Operating Temperature
Storage Temperature
-20 to +70C°*3 (Case)
-20 to +105C
VOLTAGE PROGRAMMING
91 - Vout
14.1
SIP90 Programming Voltage =
SIP100 Programming Voltage =
OUTPUT VOLTAGE (Pin 4) vs. PROGRAMMING VOLTAGE (Pin 1)
100 - Vout
15.8
100
90
80
70
60
50
40
30
20
Ripple Measurements:
1. Ripple specified at maximum output power
2. Set scope bandwidth limit to 20MHz
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
Programming pin (#1):
Programming Voltage
1. Pin should be left open for min Vout.
2. Pin must be grounded for max Vout.
3. Pin Can be modeled in the following way:
(Please refer to the programming voltage chart)
WWW.XPPOWER.COM
4760W02
PAGE 2
SIP SERIES
MECHANICAL SPECIFICATIONS SIP
SIP90
SIP100
.16 .05
.16 .05
(4.06)
1.45 (36.8)
1.15 (29.2)
(4.06)
www.emcohighvoltage.com
www.emcohighvoltage.com
.55
High Voltage Corporation
.75
High Voltage Corporation
Model Mfg. Code
(13.97)
(19.05)
Model
Mfg. Code
SIP90
SIP100
5
4
3 2 1
.20 (5.08)
5
4
3 2 1
.20
.06 .05
(5.08)
.020 (0.51)
5X
(1.52 1.27)
.06 .05
.020 (0.51)
5X
(1.52 1.27)
.010 (.25)
5X
.010 (.25)
5X
.10 (2.54)
.12 (3.05)
DIMENSIONS ARE IN INCHES (METRIC EQUIVALENTS ARE IN PARENTHESIS)
+
DIMENSIONAL TOLERANCES: .XX = 0.03 (0.76)
-
PARAMETER
VALUE
PIN #
FUNCTION
PROGRAMMING INPUT
GROUND
1
SIP 90
SIP 100
WEIGHT
VOLUME
<0.2 OZ (5 GRAMS)
<0.25 OZ (7.1 GRAMS)
2
0.101 CUBIC INCHES
(1,656 CUBIC MILLIMETERS)
0.174 CUBIC INCHES
(2,850 CUBIC MILLIMETERS)
DISABLE: TTL, LOW, OPEN
COLLECTOR COMPATIBLE
3
DIMENSIONS
1.15 x 0.55 x 0.16 (29.2 x 13.97 x 4.06)
1.45 x 0.75 x 0.16 (36.83 x 19.05 x 4.06)
4
5
SUPPLY VOLTAGE
OUTPUT VOLTAGE
WWW.XPPOWER.COM
4760W02
PAGE 3
SIP SERIES
APPLICATION NOTES
*Notes:
1. At Maximum Rated Output Voltage.
2. Specifications after 1 hour warm-up, full load, at 25°C unless otherwise indicated.
3. Proper thermal management techniques are required to maintain safe case temperature at maximum power output.
XP EMCO reserves the right to make changes on products and literature, including specifications, without notice. XP EMCO standard product models are not recommended for “copy-exact” applications or any other application restricting product
changes. “Copy-exact” options are available. Please contact an XP EMCO sales representative for more details.
WWW.XPPOWER.COM
4760W02
PAGE 4
相关型号：
SIPC05AN06
Power Field-Effect Transistor, 60V, 0.15ohm, N-Channel, Silicon, Metal-oxide Semiconductor FET, DIE
INFINEON
SIPC05AN06L
Power Field-Effect Transistor, 60V, 0.15ohm, N-Channel, Silicon, Metal-oxide Semiconductor FET, DIE
INFINEON
SIPC05N60S5
Power Field-Effect Transistor, 3A I(D), 600V, 1.74ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, DIE-3
INFINEON
SIPC06AN05
Power Field-Effect Transistor, 50V, 0.1ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, DIE-2
INFINEON
SIPC06AN05L
Power Field-Effect Transistor, 50V, 0.1ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, DIE-2
INFINEON
SIPC06AN05LZ
Power Field-Effect Transistor, 50V, 0.125ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, DIE-2
INFINEON
SIPC06AN05Z
Power Field-Effect Transistor, 50V, 0.1ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, DIE-2
INFINEON
SIPC06AN06
Power Field-Effect Transistor, 60V, 0.12ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, DIE-2
INFINEON
SIPC06N60C2
Power Field-Effect Transistor, 4A I(D), 600V, 1.2ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, DIE-2
INFINEON
SIPC06N60S5
Power Field-Effect Transistor, 4A I(D), 600V, 1.2ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, DIE-3
INFINEON
SIPC08AN05
Power Field-Effect Transistor, 50V, 0.07ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, DIE-2
INFINEON
©2020 ICPDF网 联系我们和版权申明