SMM400PS54-C [XPPOWER]
AC-DC Power Supplies; AC- DC电源
| 型号： | SMM400PS54-C |
| 厂家： | 
XP POWER LIMITED |
| 描述： | AC-DC Power Supplies |
| 文件： | 总4页 (文件大小：198K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
400 Watts
xppower.com
SMM Series
•
•
•
•
•
•
•
Industrial, IT & Medical Approvals
Low Profile for 1U Applications
Optional Current Share & AC Fail
Output Voltages from 3.3 V to 54 V
Enclosed with Internal Fan & U-Channel Versions
Class B Conducted Emissions
Optional Molex Connectors
Specification
Input
General
Input Voltage
Input Frequency
Input Current
Inrush Current
• 90-264 VAC (120-370 VDC)
Efficiency
• 3.3 & 5.0 V single output: 70ꢀ min,
All other single output: 80ꢀ min, Dual
outputs: 75ꢀ min at 230 VAC, full load
• 47-63 Hz
• 6.35 A at 90 VAC, full load
Isolation
• 4000 VAC Input to Output, 1500 VAC Input
to Ground, 250 VDC Output to Ground
• 35 A peak max (cold start at 240 VAC
& full load)
Switching Frequency
• 25 kHz for PWM stage,
60 kHz for PFC stage
• 6.25 W/In3 based on unit without cover/fan
Power Factor
• Meets EN61000-3-2
Earth Leakage Current • <300 µA max at 264 VAC/60 Hz
Power Density
Signals
UVLO
• Shut down when 75 VAC <Vin <85 VAC
& turns on when Vin >86 VAC
• Current Share, Power Good, Current
Monitor & optional AC Fail (see note 5 -
available on single output models onlꢂ)
Input Protection
• Internal 8 A fuse in line and neutral
MTBF
• 140 kHrs at +25 °C per MIL-HDBK-217F
Output
Output Voltage
Output Voltage Trim
Initial Set Accuracy
Minimum Load
Start Up Delay
• 3.3 to 54 VDC - see tables
Environmental
•
5ꢀ on V1, adꢁustable bꢂ user
Operating Temperature • -0 °C to +70 °C, derate linearlꢂ from
• Within 1ꢀ of stated output voltage
• Single output: 1ꢀ, Dual output (V1): 10ꢀ
• 2 s max at 120 VAC
+50 °C to+ 70 °C at 2.5ꢀ/°C
Cooling
• Minimum 23 CFM airflow required for
maximum power output. ‘-C’ version has
built-in fan, others require 23 CFM air flow
to meet fan-cooled ratings
Hold Up Time
• 20 ms min at 80ꢀ full load
• 0.5ꢀ
Line Regulation
Load Regulation
Operating Humidity
Storage Temperature
Vibration
• 5-90ꢀ RH, non-condensing
• -20 °C to +85 °C
•
1ꢀ (single outputs),
3ꢀ V1, 7ꢀ V2 (dual outputs)
• 5-50 Hz, acceleration 2 g, 3 minute
sweep, 60 mins in 3 axes
Over/Undershoot
• Not to exceed 5ꢀ of nominal voltage
Transient Response
• 5ꢀ max deviation, recoverꢂ to within 1ꢀ
in 500 µs for a 50ꢀ load change
Shock
• 15 g 11 ms 1/2 sine wave, 3 times in 6
axes
Ripple & Noise
• <1ꢀ of nominal output voltage
Bump
• 15 g 6 ms 1/2 sine 4000 bumps in 3 axes
Overvoltage Protection • >130ꢀ Vnom, recꢂcle input to reset
Overtemperature
Protection
• Shuts down at +85 °C, measured internallꢂ
with auto recoverꢂ
EMC & Safety
Emissions
• EN55011/22 Level B conducted & radiated
• EN61000-3-2
Overload Protection
• 110-140ꢀ
Harmonic Currents
ESD Immunity
Radiated Immunity
EFT/Burst
Short Circuit Protection • Constant current, auto recoverꢂ
• EN61000-4-2, level 3 Perf Criteria A
• EN61000-4-3, 3 V/m Perf Criteria A
• EN61000-4-4, level 2 Perf Criteria A
• EN61000-4-5, level 3 Perf Criteria A
• EN61000-4-6, 3 V, Perf Criteria A
Remote Sense
• Compensates for up to 0.5 V drop
(not available with current share)
Remote On/Off
Current Share
Fan Drive
• On = TTL Logic High or Open
Off = TTL Logic Low or Short
Surge
Conducted Immunity
Dips & Interruptions
• Option ‘-I’ available on single output
models onlꢂ - see note 4
T
• EN61000-4-11 70ꢀ U for 10 ms,
T
T
40ꢀ U for 100 ms, <5ꢀ U for 5000 ms
Perf Crit A, B, B (Perf Crit A, A, B with
85ꢀ load)
• 12 V at 500 mA
Safety Approvals
• UL60601-1, EN60601-1, EN60950-1:2001,
UL60950, CSA C22.2 No. 60950-1-03,
CSA C22.2 No. 601.1-M90
SMM-C
Models and Ratings
Maximum Output Current
Output
Voltage(1)
3.3 V
Total
Output Power
198 W
Model
Number(2,3,4,5)
V1
V2
60.00 A
60.00 A
33.34 A
26.60 A
22.20 A
16.70 A
14.80 A
11.10 A
8.30 A
SMM400PS03-C†
SMM400PS05-C†
SMM400PS12-C†
SMM400PS15-C†
SMM400PS18-C
SMM400PS24-C†
SMM400PS27-C
SMM400PS36-C
SMM400PS48-C†
SMM400PS54-C
SMM400PD21-C
SMM400PD22-C
SMM400PD23-C
SMM400PD24-C
SMM400PD25-C
5.0 V
300 W
12.0 V
400 W
15.0 V
400 W
18.0 V
400 W
24.0 V
400 W
27.0 V
400 W
36.0 V
400 W
48.0 V
400 W
54.0 V
400 W
7.40 A
3.3 V/12.0 V
3.3 V/24.0 V
5.0 V/12.0 V
5.0 V/24.0 V
12.0 V/24.0 V
300 W
40.00 A
40.00 A
40.00 A
40.00 A
25.00 A
25.00 A
12.50 A
25.00 A
12.50 A
12.50 A
300 W
300 W
300 W
400 W
Notes
1. Other output voltages available. Contact sales.
2. Standard input is screw terminal. For optional IEC320 input and on/off switch, add suffix ‘-D’ to model number.
3. Standard output is screw terminal. For optional Molex output connector, add suffix ‘-G’ to model number.
4. For current share option, add suffix ‘-I’ to model number (remote sense not available). This option also adds internal block diodes.
5. For AC fail option, add suffix ‘-L’ to model number (single output only). UVLO function is disabled. Output is low when input is <80 VAC, high (5 V) if input is >86 VAC.
6. When ordering place option suffixes in alphabetical order, e.g. SMM400PS24-CDI.
† Available from Farnell. See pages 204-206.
Mechanical Details
All dimensions in inches (mm).
Weight: 2.20 lbs (1.0 kg).
Max Screw Penetration: 0.15 (3.81) on bottom, 0.25 (6.35) on sides.
0.80 (20.3)
9.01 (228.6)
1.25 (31.8)
Single
Dual
C
B
C
B
+
-
RS
RS
AC Inlet
REM ON/OFF
PG
1.50 (38.1)
+
-
RS
RS
ACF*
RTN
STANDARD
‘-D’ OPTION
REM ON/OFF
CSH
PG
RTN
CMN
B
B
C
C
‘-G’
‘-G’
OPTION
OPTION
0.50 (12.7)
0.88 (22.2)
V2
V2
RTN
RTN
C
C
B
B
V1
V1
7.01 (177.8)
TERMINAL BLOCK
M3.5 SCREW 6PINS
9.5mm CENTER
TERMINAL BLOCK
M3.5 SCREW 6PINS
9.5mm CENTER
1.60 (40.6)
1.25 (31.8)
B
C
B
C
TERMINAL BLOCK
M3 SCREW
3PINS 8.25mm CENTER
0.80 (20.3)
7.01 (177.8)
1.50 (38.1)
Mating Connectors
Signal Connector (Single): JST XHP-9
Signal Connector (Dual): JST XHP-5
Fan Connector: JST XHP-2
Crimp Terminals: SXH-002-P0.6
‘-G’ Optional Output: Molex No. 09-91-1600
Crimps: Molex Series 6838
SMM
Models and Ratings
Maximum Output Current
Total Output Power
Output Voltage
Range(1)
Model
Number(2,3,4,5,6)
Output 1
Convection
Output 2
Convection
148.5 W
225.0 W
250.0 W
250.0 W
250.0 W
250.0 W
250.0 W
250.0 W
250.0 W
250.0 W
200.0 W
200.0 W
200.0 W
200.0 W
250.0 W
Fan-Cooled
198 W
300 W
400 W
400 W
400 W
400 W
400 W
400 W
400 W
400 W
300 W
300 W
300 W
300 W
400 W
Fan-Cooled
60.00 A
60.00 A
33.34 A
26.60 A
22.20 A
16.70 A
14.80 A
11.10 A
8.30 A
Convection
Fan-Cooled
3.3 V
5.0 V
45.00 A
45.00 A
20.80 A
16.60 A
13.90 A
10.40 A
9.20 A
SMM400PS03
SMM400PS05
SMM400PS12
SMM400PS15
SMM400PS18
SMM400PS24
SMM400PS27
SMM400PS36
SMM400PS48
SMM400PS54
SMM400PD21
SMM400PD22
SMM400PD23
SMM400PD24
SMM400PD25
12.0 V
15.0 V
18.0 V
24.0 V
27.0 V
36.0 V
6.90 A
48.0 V
5.20 A
54.0 V
4.60 A
7.40 A
3.3 V/12.0 V
3.3 V/24.0 V
5.0 V/12.0 V
5.0 V/24.0 V
12.0 V/24.0 V
30.00 A
30.00 A
30.00 A
30.00 A
16.70 A
40.00 A
40.00 A
40.00 A
40.00 A
25.00 A
16.70 A
8.30 A
16.70 A
8.30 A
8.30 A
25.00 A
12.50 A
25.00 A
12.50 A
12.50 A
Notes
1. Other output voltages available. Contact sales.
2. For optional solid cover, add suffix ‘-A’ to the model number (external dimensions remain the same).
3. Standard input is screw terminal. For optional Molex input connector, add suffix ‘-F’ to model number.
4. Standard output is screw terminal. For optional Molex output connector, add suffix ‘-G’ to model number.
5. For current share option, add suffix ‘-I’ to model number (remote sense not available). This option also adds internal block diodes.
6. For AC fail option, add suffix ‘-L’ to model number (single output only). UVLO function is disabled. Output is low when input is <80 VAC, high (5 V) if input is >86 VAC.
7. When ordering place option suffixes in alphabetical order, e.g. SMM400PS24-GI.
Mechanical Details
All dimensions in inches (mm).
Weight: 2.20 lbs (1.0 kg).
Max Screw Penetration: 0.15 (3.81) on bottom, 0.25 (6.35) on sides.
0.80
(20.3)
1.25
(31.8)
C
B
C
B
Single
Dual
7.00 (177.8)
+
RS
-
RS
REM ON/OFF
PG
ACF*
0.50
(12.7)
0.50
(12.7)
+
-
RS
RS
RTN
REM ON/OFF
CSH
PG
CMN
RTN
B
C
B
C
‘-G’
‘-G’
OPTION
OPTION
V2
5.00 0.012
(127.0 0.3)
4.00
(101.6)
V2
RTN
RTN
3.25
(82.6)
‘-F’ OPTION
V1
L
V1
L
N
G
N
G
C
C
TERMINAL BLOCK
M3.5 SCREW 6PINS
9.5mm CENTER
TERMINAL BLOCK
M3.5 SCREW 6PINS
9.5mm CENTER
B
B
8.00 (203.2)
7.00 (177.8)
0.5
(12.7)
Mounting holes B: 6-32
Mounting holes C: M4
B
B
1.60
(40.6)
C
C
1.25
(31.8)
0.80
(20.3)
Mating Connectors
Signal Connector (Single): JST XHP-9
Signal Connector (Dual): JST XHP-5
Fan Connector: JST XHP-2
Crimp Terminals: SXH-002-P0.6
‘-F’ optional input: Molex No. 09-91-0700
‘-G’ optional output: Molex No. 09-91-1600
Crimps: Molex Series 6838
SMM
Application Notes
Remote On/Off
Current Monitor
Single Output Only
ON/OFF
CN3 Pin 3, control connector
CMN
CN3 Pin 8, control connector
PSU
PSU
Return
CN3 Pin 6, control connector (single output)
CN3 Pin 5, control connector (dual output)
Return
CN3 Pin 6, control connector
Note:
1. Applꢂing <0.3 V or short between
pins 5(6) and 3 turns the output OFF.
2. Applꢂing >4.5 V or open circuit between
pins 5(6) and 3 turns output ON.
Note:
1. 0.5 V to 3.0 V represents 0ꢀ to 100ꢀ full load.
Remote Sense
Optional AC Fail
Single Output Only
+
Output
+12 V
1 K
CD
Twisted Pair
+
CN3 Pin 1 Sense
+
-
LOAD
-
CL
Supply
CN3 Pin 5, control connector
AC Fail
Sense
CN3 Pin 2
CD
5 V
Output
-
CN3 Pin 6, control connector
Return
Note:
1. CL is 47 µF electrolꢂtic capacitor.
2. CD is 0.1 µF ceramic capacitor.
Parallel Connection with Current Share Option
Single Output Only
Output
Return
Supply 1
AC GOOD
V1
CN3 Pin 7 Current Share
LOAD
Comm
Output
Supply 2
AC FAIL
Return
CN3 Pin 7 Current Share
Sink current = 250 mA
Source current = 7 mA
Note: Current share option includes internal blocking diodes.
Power Good
+5 V
1 K
POWER GOOD
CN3 Pin 4, control connector
PG
Sink current = 5 mA
Source current = 1 mA
POWER NOT GOOD
CN3 Pin 6, control connector (single output)
CN3 Pin 5, control connector (dual output)
Return
18-Dec-07
相关型号：
©2020 ICPDF网 联系我们和版权申明