VEH60US30 [XPPOWER]
Energy Efficiency Level V, â¥15 V, CEC 2008 & EISA 2007 Compliant;
| 型号： | VEH60US30 |
| 厂家： | 
XP POWER LIMITED |
| 描述： | Energy Efficiency Level V, â¥15 V, CEC 2008 & EISA 2007 Compliant |
| 文件： | 总2页 (文件大小：365K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
xppower.com
60 Watts
VEH Series
•
•
•
•
•
•
•
Energy Efficiency Level V, ≥15 V
CEC 2008 & EISA 2007 Compliant
China Compulsory Certfication (CCC) Qualified
Single Outputs from 12 V to 30 V
Optional Inlet Connectors
No Load Input Power <0.5 W
High Power Density
B R A N D
Specification
Input
General
Input Voltage
Input Frequency
Input Current
Inrush Current
• 90-264 VAC
• 47-63 Hz
• 1.7 A max
• 50 A max at 230 VAC, cold start at 25 °C
Efficiency
• See table
• Level V ≥15 V
• 3000 VAC Input to Output,
1500 VAC Input to Ground.
Energy Efficiency
Isolation
Switching Frequency
MTBF
• 60 kHz 10 kHz
• >700 kHrs to Bell Core iss. 6
Earth Leakage Current • <1 mA at 240 VAC/50 Hz
Power Factor • EN61000-3-2, class A
No Load Input Power • <0.5 W
Input Protection
• Internal T3.15A/250 V fuse in line
Environmental
Operating Temperature • 0 ˚C to +60 ˚C derate linearly from 100%
load at +40 ˚C to 50% load at +60 ˚C
Storage Temperature • -20 ˚C to +85 ˚C
Output
Output Voltage
• See table
Initial Set Accuracy
Minimum Load
•
5% at 50% load
Operating Humidity
Storage Humidity
Shock
• 5% to 90% RH non-condensing
• 5% to 95% RH non-condensing
• 6 random drops from 0.7 m with no
• No minimum load requirement
• 8 ms min at 115 VAC, full load
• 3 s max
Hold Up Time
Start Up Delay
damage, 50 g for 20 ms in each of 3 axes
Start Up Rise Time
Transient Response
• 8 ms typical
Vibration
• 2 g variable frequency from 20 Hz to 30 Hz
• 4% maxiumum deviation, recovering to
less than 1% within 500 µs for a 50%
step load change
EMC & Safety
Line Regulation
Load Regulation
Ripple & Noise
•
•
0.5% max
5% max
Emissions
• EN55022, level B conducted & radiated
• EN61000-3-2 class A
• EN61000-3-3
• EN61000-4-2, level 3 Perf Criteria A
• EN61000-4-3, 3 V/m Perf Criteria A
• EN61000-4-4, level 3 Perf Criteria A
Harmonic Currents
Voltage Flicker
ESD Immunity
Radiated Immunity
EFT/Burst
• 200 mv pk-pk max, 20 MHz bandwidth
(see note 1)
Overvoltage Protection • See table
Overload Protection • 110 -180%
Short Circuit Protection • Continuous (hiccup/trip & restart mode
with auto recovery)
0.04%/˚C
Surge
• EN61000-4-5, installation class 3,
Perf Criteria B
Temperature
Coefficient
•
Conducted Immunity
Magnetic Field
• EN61000-4-6, level 2 Perf Criteria A
• EN61000-4-8, 3 A/m Perf Criteria A
Dips & Interruptions
• EN61000-4-11, 30% 10 ms, 60% 100 ms,
100% 5000 ms Perf Criteria A, B, B
Safety Approvals
• IEC60950-1, EN60950-1, UL/cUL60950-1,
China Compulsory Certification (CCC)
qualified, Approved as Limited Power
Source
VEH60
Models and Ratings
Output Power
Output Voltage(5)
Output Current
OVP Setting(2)
Efficiency(3)
Model Number(4)
60 W
60 W
60 W
60 W
60 W
12.0 V
15.0 V
19.0 V
24.0 V
30.0 V
5.00 A
4.00 A
3.16 A
2.50 A
2.00 A
16.0 V
18.0 V
25.0 V
30.0 V
36.0 V
85%
87%
87%
87%
87%
VEH60US12†^
VEH60US15 †^
(6)
(6)
VEH60US19
(6)
VEH60US24 †^
(6)
VEH60US30
Notes
1. Measured at the output connector with a 0.1 µF ceramic capacitor and a 10 µF electrolytic capacitor.
2. Typical values.
3. Average of efficiencies measured at 25%, 50%, 75% and 100% load and 230 VAC input.
4. For optional IEC320-C6 input connector, add suffix ‘C6’ to end of the part number, e.g. VEH60US24C6. Contact sales for details.
5. Other voltages between 12 V and 30 V available on request, contact sales for details.
6. Energy Efficiency Level V.
† Available from Farnell & element14. See page 28.
^ Available from Newark. See page 28.
Mechanical Details
Cable length: 48” 2” (1220 mm 50 mm)
IEC320-C14
2.09
1.57 1.18 0.2
0.43
(11.0)
(53.0)
(40.0)
(30.0,
5.0)
0.91
(23.0)
0.4
(10.0)
4.62
(117.4)
Optional IEC320-C6
1.26
(32.0)
0.91
(23.0)
Power Cord for C14 inlet, Order Part:
UK - UK-MAINS-IEC
European - EU-MAINS-IEC
US - US-MAINS-IEC
Power Cord for C6 inlet, Order Part:
UK - UK-MAINS-5
European - EU-MAINS-5
US - US-MAINS-5
Notes
1. All dimensions are shown in inches (mm), Tolerance is 0.04” ( 1.0) max except output lead.
2. Weight: 0.76 lbs (345 g) approx.
3. Output connector is barrel type with 11 mm length, 5.5 mm dia. outer, 2.5 mm dia. inner with center + and outer shell - polarity.
4. Optional output connectors available.
04-Oct-11
相关型号：
©2020 ICPDF网 联系我们和版权申明