232273569532L [YAGEO]
Fixed Resistor, Metal Glaze/thick Film, 1W, 9530ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218, CHIP, ROHS COMPLIANT;型号: | 232273569532L |
厂家: | YAGEO CORPORATION |
描述: | Fixed Resistor, Metal Glaze/thick Film, 1W, 9530ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218, CHIP, ROHS COMPLIANT 电阻器 |
文件: | 总8页 (文件大小:293K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
GENERAL PURPOSE CHIP RESISTORS
RC1218
5%, 1%
RoHS compliant
Product specification
2
8
SERIES
1218 (RoHS Compliant)
RC
Chip Resistor Surface Mount
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC
This specification describes
RC1218 series chip resistors
with lead-free terminations made
by thick film process.
Both part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
YAGEO BRAND ordering code
(
)
GLOBAL PART NUMBER PREFERRED
RC1218 X K - XX XXXX L
APPLICATIONS
( ) ( ) ( ) ( )
( )
5
( )
6
1
2
3
4
ꢀ All general purpose application
( )
1 TOLERANCE
F = ±1%
FEATURES
J = ±5% (for Jumper ordering, use code of J)
ꢀ RoHS compliant
( )
2 PACKAGING TYPE
- Products with lead free
terminations meet RoHS
requirements
K = Embossed taping reel
( )
3 TEMPERATURE COEFFICIENT OF RESISTANCE
- Pb-glass contained in electrodes
– = Base on spec
- Resistor element and glass are
exempted by RoHS
( )
4 TAPING REEL
ꢀ Reducing environmentally
07 = 7 inch dia. Reel
hazardous wastes
( )
5 RESISTANCE VALUE
ꢀ High component and equipment
There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need
to mention the last zero after R/K/M, e.g.1K2, not 1K20.
reliability
ꢀ Saving of PCB space
Detailed resistance rules show in table of “Resistance rule of global part number”.
ꢀ None forbidden-materials used
in products/production
(6) OPTIONAL CODE
ꢀ Halogen Free Epoxy
L = optional symbol (Note)
Resistance rule of global part
number
ORDERING EXAMPLE
The ordering code of a RC1218
chip resistor, value 56 X with
±1% tolerance, supplied in 7-inch
tape reel is: RC1218FK-0756R(L).
Resistance code rule
Example
0R
0R = Jumper
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
XRXX
(1 to 9.76 Ω)
NOTE
1. All our RSMD products meet RoHS
compliant. "LFP" of the internal 2D reel
label mentions "Lead Free Process"
XXRX
10R = 10 Ω
(10 to 97.6 Ω)
97R6 = 97.6 Ω
XXXR
(100 to 976 Ω)
2. On customized label, "LFP" or specific
symbol printed and the optional "L" at
the end of GLOBAL PART NUMBER /
12NC can be added (both are on
customer request)
100R = 100 Ω
XKXX
(1 to 9.76 KΩ)
1K = 1,000 Ω
9K76 = 9760 Ω
XMXX
1M = 1,000,000 Ω
(1 to 9.76 MΩ)
9M76= 9,760,000 Ω
www.yageo.com
Jul 15, 2008 V.2
Product specification
3
8
SERIES
1218 (RoHS Compliant)
RC
Chip Resistor Surface Mount
PHYCOMP BRAND ordering codes
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp
brand products.
(
)
GLOBAL PART NUMBER PREFERRED
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC CODE
2322
(1)
XXX XXXXX L
Last digit of 12NC
Resistance decade (3)
( )
(2)
(3)
4
Last digit
EMBOSSED TAPE ON REEL (units) (2)
4,000
X
0.01 to 0.0976
0
7
8
9
1
2
3
4
5
6
TYPE/ START TOL.
RESISTANCE
RANGE
1218 IN (1)
(%)
X
0.1 to 0.976
X
1 to 9.76
PRC201
2322
±5%
±1%
-
1 to 1 MΩ
1 to 1 MΩ
0 Ω
735 64xxx
735 7xxxx
735 90007
X
10 to 97.6
100 to 976
1 to 9.76 K
PRC201 2322
Jumper 2322
X
X
(1) The resistors have a 12-digit ordering code starting with 2322.
X
10 to 97.6 K
X
(2) The subsequent 4 or 5 digits indicate the resistor tolerance and
packaging.
100 to 976 K
X
1 to 9.76 M
(3) The remaining 4 or 3 digits represent the resistance value with the
last digit indicating the multiplier as shown in the table of
“Last digit of 12NC”.
X
10 to 97.6 M
X
X
Example: 0.02
=
=
=
=
=
0200 or 200
3007 or 307
1008 or 108
3303 or 333
1006 or 106
X
0.3
(4) "L" is optional symbol (Note)
.
X
1
ORDERING EXAMPLE
33 K
10 M
The ordering code of a PRC201 resistor, value 56 X with ±1% tolerance,
supplied in tape of 4,000 units per reel is: 232273575609(L) or
RC1218FK-0756R(L).
X
NOTE
1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART
NUMBER / 12NC can be added (both are on customer request)
www.yageo.com
Jul 15, 2008 V.2
Product specification
4
8
SERIES
1218 (RoHS Compliant)
RC
Chip Resistor Surface Mount
MARKING
RC1218
E-24 series: 3 digits
First two digits for significant figure and 3rd digit for number of zeros
YNSC023
Fig. 1 Value=100 Ω
Both E-24 and E-96 series: 4 digits
First three digits for significant figure and 4th digit for number of zeros
YNSC024
Fig. 2 Value=10 KΩ
For further marking information, please see special data sheet “Chip resistors marking”.
CONSTRUCTION
The resistor is constructed on top
of a high-grade ceramic body.
OUTLINES
For dimension see Table 1
Internal metal electrodes are added
on each end to make the contacts to
the thick film resistive element. The
composition of the resistive element
is a noble metal imbedded into a
glass and covered by a second glass
to prevent environment influences.
The resistor is laser trimmed to the
rated resistance value. The resistor
is covered with a protective epoxy
coat, finally the two external
marking layer
overcoat
Primary glass layer
resistive layer
(Jumper chip is a conductor)
inner electrode
H
termination(Ni/matte tin)
ceramic substrate
I
2
overcoat
I
1
terminations (matte tin on Ni-
barrier) are added. See fig.3
W
DIMENSIONS
YNSC066
Table 1
L
TYPE
RC1218
Fig. 3 Chip resistor outlines
L (mm)
W (mm)
H (mm)
I1 (mm)
I2 (mm)
3.10 ± 0.10
4.60 ± 0.10
0.55 ± 0.10
0.45 ± 0.20
0.40 ± 0.20
www.yageo.com
Jul 15, 2008 V.2
Product specification
5
8
SERIES
1218 (RoHS Compliant)
RC
Chip Resistor Surface Mount
ELECTRICAL CHARACTERISTICS
FOOTPRINT AND SOLDERING
PROFILES
Table 2
For recommended footprint and
soldering profiles, please see the
special data sheet “Chip resistors
mounting”.
RC1218 1 W
CHARACTERISTICS
Operating Temperature Range
Maximum Working Voltage
Maximum Overload Voltage
Dielectric Withstanding Voltage
–55 °C to +155 °C
200 V
500 V
500 V
5% (E24) 1 Ω to 1 MΩ
Resistance Range
1% (E24/E96) 1 Ω to 1 MΩ
Zero Ohm Jumper < 0.02 Ω
1 Ω ≤ R ≤ 10 Ω
±200 ppm/°C
±100 ppm/°C
6 A
Temperature Coefficient
Jumper Criteria
10 Ω < R ≤ 1 MΩ
Rated Current
Maximum Current
10 A
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PRODUCT TYPE
RC1218
PACKING STYLE
REEL DIMENSION
QUANTITY PER REEL
Embossed taping reel (K)
7" (178 mm)
4,000 units
NOTE
1. For embossed tape and reel specification/dimensions, please see the special data sheet “Packing” document.
FUNCTIONAL DESCRIPTION
POWER RATING
handbook, halfpage
RC1218 rated power at 70°C is 1 W
P
MLB206_2
(%P
rated
)
RATED VOLTAGE
100
50
0
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V=√(P X R)
55
0
50 70
100
155
o
(
C)
T
amb
or max. working voltage whichever is less
Where
Fig. 4 Maximum dissipation (P) in percentage of rated power as a
function of the operating ambient temperature (T
V=Continuous rated DC or
AC (rms) working voltage (V)
)
amb
P=Rated power (W)
R=Resistance value (X)
www.yageo.com
Jul 15, 2008 V.2
Product specification
6
8
SERIES
1218 (RoHS Compliant)
RC
Chip Resistor Surface Mount
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
MIL-STD-202G-method 108A
IEC 60115-1 4.25.1
JIS C 5202-7.10
Life/
1,000 hours at 70±5 °C applied RCWV
1.5 hours on, 0.5 hour off, still air required
±(2%+0.05 Ω)
Operational Life/
Endurance
<100 mΩ for Jumper
MIL-STD-202G-method 108A
IEC 60115-1 4.25.3
High
Temperature
Exposure/
Endurance at
upper category
temperature
1,000 hours at maximum operating temperature
depending on specification, unpowered
±(1%+0.05 Ω)
<50 mΩ for Jumper
No direct impingement of forced air to the parts
Tolerances: 125±3 °C
JIS C 5202-7.11
MIL-STD-202G-method 106F
IEC 60115-1 4.24.2
Moisture
Resistance
Each temperature / humidity cycle is defined at 8
hours (method 106F), 3 cycles / 24 hours for 10d
with 25 °C / 65 °C 95% R.H, without steps 7a &
7b, unpowered
±(2%+0.05 Ω)
<100 mΩ for Jumper
Parts mounted on test-boards, without
condensation on parts
Measurement at 24±2 hours after
test conclusion
MIL-STD-202G-method 107G
Thermal Shock
-55/+125 °C
±(0.5%+0.05 Ω) for 10 KΩ to
10 MΩ
Note: Number of cycles required is 300. Devices
unmounted
±(1%+0.05 Ω) for others
<50 mΩ for Jumper
Maximum transfer time is 20 seconds. Dwell time
is 15 minutes. Air – Air
MIL-R-55342D-para 4.7.5
IEC60115-1 4.13
Short time
overload
2.5 times RCWV or maximum overload voltage
whichever is less for 5 sec at room temperature
±(2%+0.05 Ω)
<50 mΩ for Jumper
No visible damage
IEC60115-1 4.33
Board Flex/
Bending
Device mounted on PCB test board as described,
only 1 board bending required
±(1%+0.05 Ω)
<50 mΩ for Jumper
No visible damage
3 mm bending
Bending time: 60±5 seconds
Ohmic value checked during bending
www.yageo.com
Jul 15, 2008 V.2
Product specification
7
8
SERIES
1218 (RoHS Compliant)
RC
Chip Resistor Surface Mount
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Solderability
- Wetting
Well tinned (≥95% covered)
IPC/JEDECJ-STD-002B test B
IEC 60068-2-58
Electrical Test not required
Magnification 50X
No visible damage
SMD conditions:
1st step: method B, aging 4 hours at 155 °C
dry heat
2nd step: leadfree solder bath at 245±3 °C
Dipping time: 3±0.5 seconds
IPC/JEDECJ-STD-002B test D
IEC 60068-2-58
- Leaching
Leadfree solder, 260 °C, 30 seconds
immersion time
No visible damage
MIL-STD-202G-method 210F
IEC 60068-2-58
- Resistance to
Soldering Heat
Condition B, no pre-heat of samples
±(1%+0.05 Ω)
Leadfree solder, 270 °C, 10 seconds
immersion time
<50 mΩ for Jumper
No visible damage
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
www.yageo.com
Jul 15, 2008 V.2
Product specification
8
8
SERIES
1218 (RoHS Compliant)
RC
Chip Resistor Surface Mount
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION DESCRIPTION
Version 2
Jul 15, 2008
-
- Change to dual brand datasheet that describe RC1218 with RoHS compliant
- Description of "Halogen Free Epoxy" added
- Define global part number
Version 1
Oct 13, 2004 -
- New datasheet for 1218 thick film 1% and 5% with lead-free terminations
- Replace the 1218 part of pdf files: PRC201_51_17
- Test method and procedure updated
- Taping reel changed from 11" to 7" and quantity per reel from 5K to 4K
as well
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
Jul 15, 2008 V.2
相关型号:
232273571001L
Fixed Resistor, Metal Glaze/thick Film, 1W, 100ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
232273571004L
Fixed Resistor, Metal Glaze/thick Film, 1W, 100000ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218, CHIP
YAGEO
232273571005L
Fixed Resistor, Metal Glaze/thick Film, 1W, 1000000ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
232273571007L
Fixed Resistor, Metal Glaze/thick Film, 1W, 0.1ohm, 1% +/-Tol, -700,700ppm/Cel, 1218
YAGEO
232273571028L
Fixed Resistor, Metal Glaze/thick Film, 1W, 1.02ohm, 200V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
232273571072L
Fixed Resistor, Metal Glaze/thick Film, 1W, 1070ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218, CHIP
YAGEO
232273571079L
Fixed Resistor, Metal Glaze/thick Film, 1W, 10.7ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
232273571101L
Fixed Resistor, Metal Glaze/thick Film, 1W, 110ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
232273571104L
Fixed Resistor, Metal Glaze/thick Film, 1W, 110000ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
232273571108L
Fixed Resistor, Metal Glaze/thick Film, 1W, 1.1ohm, 200V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
232273571109L
Fixed Resistor, Metal Glaze/thick Film, 1W, 11ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
23227357119L
Fixed Resistor, Metal Glaze/thick Film, 1W, 11ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218, CHIP, HALOGEN FREE AND ROHS COMPLIANT
YAGEO
©2020 ICPDF网 联系我们和版权申明