AA0603DR-071K [YAGEO]

ANTI-SULFURATED CHIP RESISTORS AUTOMOTIVE GRADE;


型号：	AA0603DR-071K
厂家：	YAGEO CORPORATION
描述：	ANTI-SULFURATED CHIP RESISTORS AUTOMOTIVE GRADE
文件：	总10页 (文件大小：666K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

DATA SHEET

ANTI-SULFURATED CHIP RESISTORS

AUTOMOTIVE GRADE

AA series

±5%, ±1%, ±0.5%

sizes 0201/0402/0603/0805/1206/

1210/1218/2010/2512

RoHS compliant & Halogen free

Product specification

SERIES

0201 to 2512

Chip Resistor Surface Mount

SCOPE

ORDERING INFORMATION - GLOBAL PART NUMBER

This specification describes AA0201

to AA2512 chip resistors with lead-

free terminations made by thick film

process.

Part number is identified by the series name, size, tolerance, packaging

type, temperature coefficient, taping reel and resistance value.

GLOBAL PART NUMBER

AA XXXX X X X XX XXXX L

( )

( ) ( ) ( ) ( )

( )

APPLICATIONS

 Car electronics

( )

1 SIZE

 Engine control unit

 Body control system

 Safety devices

0201 / 0402 / 0603 / 0805 / 1206 / 1210 / 1218 / 2010 / 2512

( )

2 TOLERANCE

D =±0.5%

F = ±1%

FEATURES

J = ±5% (for Jumper ordering, use code of J)

 Superior resistance against sulfur

containing atmosphere

( )

3 PACKAGING TYPE

 AEC-Q200 qualified

R = Paper/PE taping reel

K = Embossed taping reel

 Moisture sensitivity level: MSL1

( )

4 TEMPERATURE COEFFICIENT OF RESISTANCE

 AA series soldering is compliant

– = Base on spec

with J-STD-020D

 Halogen free epoxy

 RoHS compliant

( )

5 TAPING REEL

07 = 7 inch dia. Reel

13 = 13 inch dia. Reel

 Reduce environmentally

( )

6 RESISTANCE VALUE

hazardous waste

1Ω to 10 MΩ

 High component and equipment

There are 2~4 digits indicated the resistance value. Letter R/K/M is decimal point, no

need to mention the last zero after R/K/M, e.g.1K2, not 1K20.

reliability

 The resistors are 100% performed

by automatic optical inspection

(7) DEFAULT CODE

Letter L is the system default code for ordering only. ^(Note)

ORDERING EXAMPLE

The ordering code for an AA0402 chip

Resistance rule of global part

number

Resistance coding

rule

resistor, value 100 KΩ with ±1%

tolerance, supplied in 7-inch tape reel is:

AA0402FR-07100KL

Example

1R = 1 Ω

1R5 = 1.5 Ω

9R76 = 9.76 Ω

XRXX

(1 to 9.76 Ω)

NOTE

1. All our R-Chip products are RoHS

compliant and Halogen free. "LFP" of the

internal 2D reel label states "Lead-Free

Process".

XXRX

(10 to 97.6 Ω)

10R = 10 Ω

97R6 = 97.6 Ω

XXXR

(100 to 976 Ω)

100R = 100 Ω

976R = 976 Ω

2. On customized label, "LFP" or specific

symbol can be printed.

XKXX

1K = 1,000 Ω

(1 to 9.76 KΩ)

9K76 = 9760 Ω

XMXX

(1 to 9.76 MΩ)

1M = 1,000,000 Ω

9M76= 9,760,000 Ω

XXMX

(10 MΩ)

10M = 10,000,000 Ω

www.yageo.com

Dec. 08 2015 V.3

Product specification

SERIES

0201 to 2512

Chip Resistor Surface Mount

MARKING

AA0201 / AA0402

No marking

Fig. 1

AA0603 / AA0805 / AA1206 / AA1210 / AA2010 / AA2512

E-24 series: 3 digits, ±5%

First two digits for significant figure and 3rd digit for number of zeros

Fig. 2 Value=10 KΩ

AA0603

E-24 series: 3 digits, ±1%

One short bar under marking letter

Fig. 3

Value = 24 Ω

E-96 series: 3 digits, ±1%

First two digits for E-96 marking rule and 3rd letter for number of zeros

Fig. 4

Value = 12.4 KΩ

AA0805 / AA1206 / AA1210 / AA2010 / AA2512

Both E-24 and E-96 series: 4 digits, ±1%

First three digits for significant figure and 4th digit for number of zeros

Fig. 5 Value = 10 KΩ

AA1218

E-24 series: 3 digits, ±5%

First two digits for significant figure and 3rd digit for number of zeros

Fig. 6 Value = 10 KΩ

Both E-24 and E-96 series: 4 digits, ±1%

First three digits for significant figure and 4th digit for number of zeros

Fig. 7 Value = 10 KΩ

NOTE

For further marking information, please refer to data sheet “Chip resistors marking”. Marking of AA series is the same as RC series.

www.yageo.com

Dec. 08 2015 V.3

Product specification

SERIES

0201 to 2512

Chip Resistor Surface Mount

CONSTRUCTION

The resistors are constructed on top of an automotive

grade ceramic body. Internal metal electrodes are

added at each end and connected by a resistive glaze.

The resistive glaze is covered by a lead-free glass.

The composition of the glaze is adjusted to give the

approximately required resistance value and laser

trimming of this resistive glaze achieves the value within

tolerance. The whole element is covered by a protective

overcoat. Size 0603 and bigger is marked with the

resistance value on top. Finally, the two external

OUTLINES

terminations (Ni / matte tin) are added, as shown in Fig.8.

Fig. 8 Chip resistor outlines

DIMENSIONS

Table 1 For outlines, please refer to Fig. 9

TYPE

L (mm)

W (mm)

H (mm)

I₁(mm)

I₂(mm)

AA0201

AA0402

AA0603

AA0805

AA1206

AA1210

AA1218

AA2010

AA2512

0.60 ±0.03

1.00 ±0.05

1.60 ±0.10

2.00 ±0.10

3.10 ±0.10

5.00 ±0.10

6.35 ±0.10

0.30 ±0.03

0.50 ±0.05

0.80 ±0.10

1.25 ±0.10

1.60 ±0.10

2.60 ±0.15

4.60 ±0.10

2.50 ±0.15

3.10 ±0.15

0.23 ±0.03

0.32 ±0.05

0.45 ±0.10

0.50 ±0.10

0.55 ±0.10

0.50 ±0.10

0.55 ±0.10

0.12 ±0.05

0.20 ±0.10

0.15 ±0.05

0.25 ±0.10

0.25 ±0.15

0.35 ±0.20

0.40 ±0.20

0.50 ±0.20

0.40 ±0.20

0.50 ±0.20

0.25 ±0.15

0.35 ±0.20

0.45 ±0.20

0.45 ±0.15

0.45 ±0.20

0.55 ±0.15

0.60 ±0.20

For dimension, please refer to Table 1

AA0201 / AA0402

AA0603/0805/1206/

1210/2010/2512

AA1218

Side view for all type

Fig. 9 Chip resistor dimensions

www.yageo.com

Dec. 08 2015 V.3

Product specification

SERIES

0201 to 2512

Chip Resistor Surface Mount

ELECTRICAL CHARACTERISTICS

Table 2

CHARACTERISTICS

Operating

Max.

Dielectric

Temperature

Coefficient

RESISTANCE

RANGE

TYPE

Temperature Range Working Overload Withstanding

Jumper Criteria

Voltage

of Resistance

1Ω ≤ R ≤ 10Ω ,

-100/+400 ppm/°C

Rated Current 0.5A

Max. Current 1.0A

AA0201

25V

50V

10Ω < R ≤ 10 MΩ ,

±300 ppm/°C

Rated Current 1A

Max. Current 2A

Rated Current 1A

Max. Current 2A

Rated Current 2A

Max. Current 5A

Rated Current 2A

Max. Current 10A

AA0402

AA0603

AA0805

AA1206

AA1210

AA1218

AA2010

AA2512

50 V

75V

100 V

150 V

300 V

400 V

500 V

100 V

150 V

300 V

500 V

5% (E24)

1Ω≤ R ≤ 22MΩ

(0201: Max. 10MΩ.

1218: Max. 1MΩ)

0.5%, 1% (E24/E96)

1Ω≤ R ≤10MΩ

(1218: Max. 1MΩ)

Jumper < 50mΩ

150 V

200 V

1 Ω ≤ R ≤ 10 Ω ,

±200 ppm/°C

–55 °C to +155 °C

10 Ω < R ≤ 10 MΩ ,

±150 ppm/°C Rated Current 2A

10 MΩ < R ≤ 22 M

Max. Current 10A

Rated Current 6A

Max. Current 10A

Rated Current 2A

Max. Current 10A

Rated Current 2A

Max. Current 10A

Ω , ±200 ppm/°C

www.yageo.com

Dec. 08 2015 V.3

Product specification

SERIES

0201 to 2512

Chip Resistor Surface Mount

FOOTPRINT AND SOLDERING PROFILES

Recommended footprint and soldering profiles. Please refer to data sheet “Chip resistors mounting”.

PACKING STYLE AND PACKAGING QUANTITY

Table 3 Packing style and packaging quantity

PACKING STYLE

REEL AA0201 AA0402 AA0603 AA0805 AA1206 AA1210 AA1218 AA2010 AA2512

DIMENSION

Paper/PE taping reel

(R)

7" (178 mm)

10,000

5,000

---

13" (330 mm)

taping

7" (178 mm)

50,000

---

50,000

---

20,000

---

20,000

---

20,000

---

20,000

---

Embossed

reel (K)

4,000

NOTE

1. For paper/PE/embossed tape and reel specifications/dimensions, please refer to data sheet “Chip resistors packing”.

FUNCTIONAL DESCRIPTION

OPERATING TEMPERATURE RANGE

Range: -55 °C to +155 °C

POWER RATING

Each type rated power at 70 °C:

AA0201=1/20W (0.05W)

AA0402=1/16 W (0.0625W)

AA0603=1/10 W (0.1W)

AA0805=1/8 W (0.125W)

AA1206=1/4 W (0.25W)

AA1210=1/2 W (0.5W)

AA1218=1 W

Fig. 10 Maximum dissipation (P ) in percentage of rated power

AA2010=3/4 W (0.75W)

AA2512=1 W

max

as a function of the operating ambient temperature (T

)

amb

RATED VOLTAGE

The DC or AA (rms) continuous working voltage

corresponding to the rated power is determined by

the following formula:

(

)

V = √ P X R

Or Maximum working voltage whichever is less

Where

(

)

( )

V = Continuous rated DC or AA rms working voltage V

(

)

P = Rated power W

( )

R = Resistance value Ω

www.yageo.com

Dec. 08 2015 V.3

Product specification

SERIES

0201 to 2512

Chip Resistor Surface Mount

TESTS AND REQUIREMENTS

Table 4 Test condition, procedure and requirements

TEST

TEST METHOD

PROCEDURE

REQUIREMENTS

AEC-Q200 Test 3

High Temperature

Exposure

1,000 hours at T_A= 155 °C, unpowered

±(1.0%+0.05Ω)

MIL-STD-202 Method 108

<50 mΩ for Jumper

AEC-Q200 Test 6

Moisture

Resistance

Each temperature / humidity cycle is defined at

8 hours (method 106F), 3 cycles / 24 hours for

10d. with 25 °C / 65 °C 95% R.H, without steps

7a & 7b, unpowered

±(0.5%+0.05Ω) for D/F tol.

±(2.0%+0.05Ω) for J tol.

<100 mΩ for Jumper

MIL-STD-202 Method 106

Parts mounted on test-boards, without

condensation on parts

AEC-Q200 Test 7

Biased

Humidity

1,000 hours; 85 °C / 85% RH

10% of operating power

±(3.0%+0.05Ω)

MIL-STD-202 Method 103

<100 mΩ for Jumper

Measurement at 24±4 hours after test conclusion.

AEC-Q200 Test 8

Operational Life

1,000 hours at 125 °C, derated voltage applied for ±(1.0%+0.05Ω)

1.5 hours on, 0.5 hour off, still-air required

MIL-STD-202 Method 108

<100 mΩ for Jumper

AEC-Q200 Test 15

Resistance to

Soldering Heat

Condition B, no pre-heat of samples

±(0.5%+0.05Ω) for D/F tol.

±(1.0%+0.05Ω) for J tol.

<50 mΩ for Jumper

MIL-STD-202 Method 210

Lead-free solder, 260± 5 °C, 10±1 seconds

immersion time

Procedure 2 for SMD: devices fluxed and

cleaned with isopropanol

No visible damage

AEC-Q200 Test 16

Thermal Shock

-55/+125 °C

±(1.0%+0.05Ω)

MIL-STD-202 Method 107

Number of cycles is 300. Devices mounted

<50 mΩ for Jumper

Maximum transfer time is 20 seconds.

Dwell time is 15 minutes. Air – Air

AEC-Q200 Test 17

AEC-Q200-002

ESD

1 pos. + 1 neg. discharges

0201: 500V

±(3.0%+0.05Ω)

<50 mΩ for Jumper

0402/0603: 1KV

0805 and above: 2KV

www.yageo.com

Dec. 08 2015 V.3

Product specification

SERIES

0201 to 2512

Chip Resistor Surface Mount

TEST

TEST METHOD

PROCEDURE

REQUIREMENTS

Solderability

- Wetting

Well tinned (≥95% covered)

AEC-Q200 Test 18

J-STD-002

Electrical Test not required Magnification 50X

SMD conditions:

No visible damage

(a) Method B, aging 4 hours at 155 °C dry heat,

dipping at 235±3 °C for 5±0.5 seconds.

(b) Method B, steam aging 8 hours, dipping at

215±3 °C for 5±0.5 seconds.

260±3 °C for 7±0.5 seconds.

AEC-Q200 Test 21

AEC-Q200-005

Board Flex

Chips mounted on a 90mm glass epoxy resin

PCB (FR4)

±(1.0%+0.05Ω )

<50 mΩ for Jumper

Bending for 0201/0402: 5 mm

0603/0805: 3 mm

1206 and above: 2 mm

Holding time: minimum 60 seconds

IEC 60115-1 4.8

MIL-STD-202 Method 304

Temperature

Coefficient of

At +25/–55 °C and +25/+125 °C

Refer to table 2

Resistance (T.C.R.)

Formula:

R₂–R₁

T.C.R= ------------------------- ×10⁶(ppm/°C)

R₁(t₂–t₁)

Where

t₁=+25 °C or specified room temperature

t₂=–55 °C or +125 °C test temperature

R₁=resistance at reference temperature in ohms

R₂=resistance at test temperature in ohms

IEC60115-1 4.13

ASTM-B-809-95

Short Time

Overload

2.5 times of rated voltage or maximum

overload voltage whichever is less for 5 sec

at room temperature

±(1.0%+0.05Ω )

<50 mΩ for Jumper

- Sulfur (saturated vapor) 1000 hours,

90±2 °C unpowered

FOS

±(1.0%+0.05Ω)

±(4.0%+0.05Ω)

- Sulfur 750 hours, 105 °C. unpowered

ASTM-B-809-95*

*Modified

www.yageo.com

Dec. 08 2015 V.3

Product specification

SERIES

0201 to 2512

Chip Resistor Surface Mount

REVISION HISTORY

REVISION DATE

CHANGE NOTIFICATION DESCRIPTION

Version 3

Version 2

Version 1

Version 0

Dec. 08, 2015

Apr. 09, 2015

Jan. 27, 2015

Feb. 27, 2014

- Update Dielectric Withstanding Voltage

- Modified FOS test procedure

- Dimensions update

- First issue of this specification

www.yageo.com

Dec. 08 2015 V.3

Product specification

SERIES

0201 to 2512

Chip Resistor Surface Mount

LEGAL DISCLAIMER

Yageo, its distributors and agents (collectively, “Yageo”), hereby disclaims any and all liabilities for any errors,

inaccuracies or incompleteness contained in any product related information, including but not limited to

product specifications, datasheets, pictures and/or graphics. Yageo may make changes, modifications and/or

improvements to product related information at any time and without notice.

Yageo makes no representation, warranty, and/or guarantee about the fitness of its products for any particular

purpose or the continuing production of any of its products. To the maximum extent permitted by law, Yageo

disclaims (i) any and all liability arising out of the application or use of any Yageo product, (ii) any and all

liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied

warranties, including warranties of fitness for a particular purpose, non-infringement and merchantability.

Yageo statements regarding the suitability of products for certain types of applications are based on Yageo’s

knowledge of typical operating conditions for such types of applications in a generic nature. Such statements

are neither binding statements of Yageo nor intended to constitute any warranty concerning the suitability for a

specific customer application or use. They are intended for use only by customers with requisite knowledge and

experience for determining whether Yageo products are the correct products for their application or use. In

addition, unpredicatable and isolated cases of product failure may still occur, therefore, customer application or

use of Yageo products which requires higher degree of reliability or safety, shall employ additional protective

safeguard measures to ensure that product failure would not result in personal injury or property damage.

Yageo products are not designed for application or use in medical, life-saving, or life-sustaining devices or for

any other application or use in which the failure of Yageo products could result in personal injury or death.

Customers using or selling Yageo products not expressly indicated for above-mentioned purposes shall do so at

their own risk and agree to fully indemnify Yageo and hold Yageo harmless.

Information provided here is intended to indicate product specifications only. Yageo reserves all the rights for

revising this content without further notification, as long as products are unchanged. Any product change will

be announced by PCN.

www.yageo.com

Dec. 08 2015 V.3

AA0603DR-071K [YAGEO]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E