AC0603BKNPO0BB_技术文档

85

DATA SHEET

SURFACE MOUNT MULTILAYER

CERAMIC CAPACITORS

Automotive grade

NP0/X7R

6.3 V TO 630 V

0.47 pF to 2.2 µF

RoHS compliant & Halogen Free

Product specification

2

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

SCOPE

ORDERING INFORMATION - GLOBAL PART NUMBER

This specification describes

Automotive grade NP0/X7R series

chip capacitors with lead-free

terminations and used for

All part numbers are identified by the series, size, tolerance, TC material,

packing style, voltage, process code, termination and capacitance value.

GLOBAL PART NUMBER

automotive equipments.

AC XXXX

X X XXX X B X XXX

(1) (2) (3) (4) (5)

(6) (7)

APPLICATIONS

( )

1 SIZE – INCH BASED (METRIC)

All general purpose applications

Entertainment applications

Comfort / security applications

Information applications

0402 (1005) / 0603 (1608) / 0805 (2012) / 1206 (3216)/ 1210 (3225) / 0508 (1220) /

0612 (1632)

( )

2 TOLERANCE

B = ±0.1 pF

C = ±0.25 pF

D= ±0.5 pF

F = ±1%

FEATURES

 AEC-Q200 qualified

 MSL class: MSL 1

 AC series soldering is

G= ±2%

J = ±5%

compliant with J-STD-020D

K = ±10%

M= ±20%

 Halogen free epoxy

 RoHS compliant

( )

 Reduce environmentally

3 PACKING STYLE

hazardous waste

R = Paper/PE taping reel; Reel 7 inch

K = Blister taping reel; Reel 7 inch

P = Paper/PE taping reel; Reel 13 inch

F = Blister taping reel; Reel 13 inch

 High component and

equipment reliability

 Save PCB space

 The capacitors are 100%

performed by automatic optical

inspection prior to taping.

( )

4 TC MATERIAL

NPO

X7R

( )

5 RATED VOLTAGE

5 = 6.3 V

6 = 10 V

7 = 16 V

8 = 25 V

9 = 50 V

0 = 100 V

A = 200 V

Y = 250 V

B = 500 V

Z = 630 V

(6) PROCESS

N= NP0

B = Class 2 MLCC

(7)

CAPACITANCE VALUE

2 significant digits+number of zeros

The 3rd digit signifies the multiplying factor, and letter R is decimal point

www.yageo.com

Mar. 31, 2017 V.6

Product specification

3

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

CONSTRUCTION

The capacitor consists of a

rectangular block of ceramic

dielectric in which a number of

interleaved metal electrodes are

contained. This structure gives

rise to a high capacitance per

unit volume.

The inner electrodes are

connected to the two end

terminations and finally covered

with a layer of plated tin (Matte

Sn). The terminations are lead-

free. A cross section of the

structure is shown in Fig.1.

Fig. 1 Surface mounted multilayer ceramic capacitor construction

DIMENSION

OUTLINES

Table 1 For outlines see fig. 2

L₂/ L₃(mm) L₄(mm)

TYPE

L₁(mm)

W (mm)

T (MM)

For dimension see Table 1

min.

0.15

0.20

0.25

max.

0.30

0.60

0.75

min.

0.40

1.40

2.20

0402

0603

0805

1206

1210

1812

1.0 ±0.05

1.6 ±0.10

2.0 ±0.20

3.2 ±0.30

4.5±0.40

0.5 ±0.05

0.8 ±0.10

1.25 ±0.20

1.6 ±0.20

2.5 ±0.20

3.2±0.40

Refer to

table 3 to 12

Fig. 2 Surface mounted multilayer

ceramic capacitor dimension

OUTLINES

Table 2 For outlines see fig. 3

TYPE 0508

(4 X 0402) (4 X 0603)

For dimensions see Table 2

0612

L (mm)

2.0 ±0.15

1.25 ±0.15

0.50

3.2 ±0.15

1.60 ±0.15

0.70

W (mm)

T_min.(mm)

T_max.(mm)

A (mm)

0.70

0.90

0.28 ±0.10

0.2 ±0.10

0.5 ±0.10

0.4 ±0.10

0.3 ±0.20

0.8 ±0.10

B (mm)

P (mm)

Fig. 3 Surface mounted multilayer ceramic capacitor dimension

www.yageo.com

Mar. 31, 2017 V.6

Product specification

4

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

CAPACITANCE RANGE & THICKNESS FOR NP0

Table 3 Sizes from 0402 to 0805

0402

50 V

0603

50 V

0805

CAP.

100 V

250 V

50 V

100 V

250V

0.47 pF

0.5±0.05

0.8±0.1

0.6±0.1

0.56 pF

0.68 pF

0.82 pF

1.0 pF

1.2 pF

1.5 pF

1.8 pF

2.2 pF

2.7 pF

3.3 pF

3.9 pF

4.7 pF

5.6 pF

6.8 pF

8.2 pF

10 pF

12 pF

15 pF

18 pF

22 pF

27 pF

33 pF

39 pF

47 pF

56 pF

68 pF

82 pF

100 pF

NOTE

1. Values in shaded cells indicate thickness class in mm

www.yageo.com

Mar. 31, 2017 V.6

Product specification

5

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

CAPACITANCE RANGE & THICKNESS FOR NP0

Table 4 Sizes from 0402 to 0805 (continued)

0402

50 V

0603

50 V

0805

CAP.

100 V

250 V

50 V

100 V

250 V

120 pF

0.5±0.05

0.8±0.1

0.6±0.1

0.85±0.1

0.6±0.1

150 pF

180 pF

220 pF

270 pF

330 pF

390 pF

470 pF

560 pF

680 pF

820 pF

1.0 nF

1.2 nF

1.5 nF

1.8 nF

2.2 nF

2.7 nF

3.3 nF

3.9 nF

4.7 nF

5.6 nF

6.8 nF

8.2 nF

10 nF

0.6±0.1

0.85±0.1

0.8±0.1

NOTE

Values in shaded cells indicate thickness class in mm

www.yageo.com

Mar. 31, 2017 V.6

Product specification

6

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

CAPACITANCE RANGE & THICKNESS FOR NP0

Table 5 Sizes from 1206 to 1210

1210

1206

50 V

CAP.

100 V

250 V

500 V

630 V

50 V

100 V

250 V

500 V

10 pF

0.6±0.1

0.85±0.1

0.6±0.1

0.85±0.1

1.25±0.2

12 pF

15 pF

18 pF

22 pF

27 pF

33 pF

39 pF

47 pF

56 pF

68 pF

82 pF

100 pF

120 pF

150 pF

180 pF

220 pF

270 pF

330 pF

390 pF

470 pF

560 pF

680 pF

820 pF

1.0 nF

1.2 nF

1.5 nF

1.8 nF

2.2 nF

2.7 nF

3.3 nF

3.9 nF

4.7 nF

5.6 nF

6.8 nF

8.2 nF

10 nF

1.25±0.2

NOTE

Values in shaded cells indicate thickness class in mm

www.yageo.com

Mar. 31, 2017 V.6

Product specification

7

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

CAPACITANCE RANGE & THICKNESS FOR X7R

Table 6 Sizes from 0402 to 0603

CAP.

0603

0402

10V

16 V

25 V

50 V

10V

16 V

25 V

50 V

100 V

100 pF

150 pF

220 pF

330 pF

470 pF

680 pF

1.0 nF

1.5 nF

2.2 nF

3.3 nF

4.7 nF

6.8 nF

10 nF

0.5±0.05

0.8±0.1

15 nF

22 nF

33 nF

47 nF

68 nF

100 nF

150 nF

220 nF

330 nF

470 nF

680 nF

1 µF

0.8±0.1

NOTE

Values in shaded cells indicate thickness class in mm

www.yageo.com

Mar. 31, 2017 V.6

Product specification

8

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

CAPACITANCE RANGE & THICKNESS FOR X7R

Table 8 Size 0805

CAP.

0805

10 V

16 V

25 V

50 V

100 V

250 V

500 V

100 pF

150 pF

220 pF

330 pF

470 pF

680 pF

1.0 nF

1.5 nF

2.2 nF

3.3 nF

4.7 nF

6.8 nF

10 nF

0.85±0.1

1.25±0.2

0.85±0.1

1.25±0.2

0.85±0.1

15 nF

22 nF

33 nF

47 nF

68 nF

0.85±0.1

1.25±0.2

0.85±0.1

1.25±0.2

100 nF

0.85±0.1

1.25±0.2

150 nF

220 nF

330 nF

470 nF

680 nF

1 µF

0.85±0.1

1.25±0.2

0.85±0.1

1.25±0.2

0.85±0.1

1.25±0.2

0.85±0.1

1.25±0.2

2.2 µF

NOTE

Values in shaded cells indicate thickness class in mm

www.yageo.com

Mar. 31, 2017 V.6

Product specification

9

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

CAPACITANCE RANGE & THICKNESS FOR X7R

Table 9 Size 1206

1206

6.3 V

CAP.

10V

16V

25V

50 V

100 V

250 V

22 nF

33 nF

0.85±0.1

1.00±0.1

1.15±0.1

0.85±0.1

1.00±0.1

1.15±0.1

0.85±0.1

1.00±0.1

1.15±0.1

0.85±0.1

1.15±0.1

1.6±0.2

0.85±0.1

1.25±0.2

0.85±0.1

1.00±0.1

47 nF

68 nF

100 nF

150 nF

220 nF

330 nF

470 nF

680 nF

1 µF

1.6±0.2

1.15±0.1

NOTE

Values in shaded cells indicate thickness class in mm

www.yageo.com

Mar. 31, 2017 V.6

Product specification

10

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

CAPACITANCE RANGE & THICKNESS FOR X7R

Table 10 Size 1210

1812

CAP.

1210

6.3V

10 V

16 V

25 V

50V

100 V

250 V

1.25±0.2

50V

100V

100 nF

150 nF

220 nF

330 nF

470 nF

680 nF

1 µF

0.85±0.1

1.25±0.2

0.85±0.1

1.25±0.2

0.85±0.1

1.25±0.2

0.85±0.1

1.25±0.2

0.85±0.1

1.15±0.1

1.25±0.2

0.85±0.1

1.25±0.2

1.60±0.2

NOTE

Values in shaded cells indicate thickness class in mm

www.yageo.com

Mar. 31, 2017 V.6

Product specification

11

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

CAPACITANCE RANGE & THICKNESS FOR 4C-ARRAY

Table 11 Temperature characteristic material from NP0

0508 (4 x 0402)

0612 (4 x 0603)

CAPACITANCE

10 pF

50 V

0.6±0.1

0.8±0.1

15 pF

18 pF

22 pF

33 pF

39 pF

47 pF

56 pF

68 pF

82 pF

100 pF

120 pF

150 pF

180 pF

220 pF

270 pF

330 pF

390 pF

470 pF

560 pF

680 pF

820 pF

1.0 nF

NOTE

Values in shaded cells indicate thickness class in mm

www.yageo.com

Mar. 31, 2017 V.6

Product specification

12

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

CAPACITANCE RANGE & THICKNESS FOR 4C-ARRAY

Table 12 Temperature characteristic material from X7R

0508 (4 x 0402)

0612 (4 x 0603)

16 V

CAPACITANCE

16 V

25 V

50 V

25 V

50 V

220 pF

330 pF

470 pF

680 pF

1.0 nF

1.5 nF

2.2 nF

3.3 nF

4.7 nF

6.8 nF

10 nF

15 nF

22 nF

33 nF

47 nF

68 nF

100 nF

0.8±0.1

0.6±0.1

NOTE

Values in shaded cells indicate thickness class in mm

www.yageo.com

Mar. 31, 2017 V.6

Product specification

13

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

THICKNESS CLASSES AND PACKING QUANTITY

Table 13

Ø 180 MM / 7 INCH

Ø 330 MM / 13 INCH

SIZE

CODE

THICKNESS

CLASSIFICATION

TAPE WIDTH

QUANTITY PER REEL

Paper

Blister

Paper

Blister

0402

0603

0.5 ±0.05 mm

0.8 ±0.1 mm

8 mm

12 mm

10,000

4,000

---

50,000

15,000

20,000

15,000

---

0.6 ±0.1 mm

---

0805/0508

1206/0612

0.85 ±0.1 mm

1.25 ±0.2 mm

0.6 ±0.1 mm

---

3,000

---

10,000

---

4,000

---

20,000

15,000

---

0.85 ±0.1 mm

1.0/1.15 ±0.1 mm

1.25 ±0.2 mm

1.6 ±0.2 mm

---

3,000

2,000

4,000

3,000

2,000

1,000

10,000

---

0.85 ±0.1 mm

1.15 ±0.1 mm

1.25 ±0.2 mm

0.6 / 0.85±0.1 mm

1.15±0.1 mm

1.25±0.2 mm

---

1210

1812

---

www.yageo.com

Mar. 31, 2017 V.6

Product specification

14

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

ELECTRICAL CHARACTERISTICS

NP0/X7R DIELECTRIC CAPACITORS; NI/SIN TERMINATIONS

Unless otherwise specified, all test and measurements shall be made under standard atmospheric conditions

for testing as given in 5.3 of IEC 60068-1:

- Temperature: 15 °C to 35 °C

- Relative humidity: 25% to 75%

- Air pressure: 86 kPa to 106 kPa

Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time

sufficient to allow the entire capacitor to reach this temperature.

The period as prescribed for recovery at the end of a test is normally sufficient for this purpose.

Table 14

VALUE

DESCRIPTION

Capacitance range

Capacitance tolerance

0.47 pF to 1 µF

NP0

C < 10 pF

±0.25 pF, ±0.5 pF

±2%, ±5%

C ≥ 10 pF

±5% ⁽¹⁾, ±10%, ± 20%

X7R

Dissipation factor (D.F.)

NP0

C < 30 pF

C ≥ 30 pF

0402

≤ 1 / ( 400 + 20C )

≤ 0.1 %

X7R

0603

0805

1206

1210

1812

0508 (Array) 0612 (Array)

≤10V 220pF to 100nF

1nF to 1uF

1nF to 2.2uF

22nF to 1uF 100nF to 1uF

≤5%

16V

220pF to 22nF 1nF to 220nF 1nF to 470nF

1nF to 10nF 220pF to 47nF ≤3.5%

27nF to 100nF

220pF to 10nF

470nF 680nF to 1uF

1nF to 39nF 1nF to 180nF 22nF to 680nF 100nF to 1uF

15nF to 100nF

≤5%

25V

1nF to 10nF 220pF to 47nF ≤2.5%

12nF to 47nF 47nF to 220nF 220nF to 470nF

680nF to 1uF

1uF

≤3.5%

≤5%

50V

220pF to 10nF

1nF to 39nF 1nF to 100nF 22nF to 470nF 100nF to 1uF 470nF to 1uF

47nF to 100nF 220nF

1nF 220pF to 10nF ≤2.5%

≤3.5%

≤2.5%

≤5%

100V

1nF to 10nF 1nF to 100nF 22nF to 220nF 100nF to 220nF 470nF to 1uF

12nF to 47nF

250V

500V

1nF to 22nF

1nF to 4.7nF

22nF

100nF

≤2.5%

Insulation resistance after 1 minute at U_r(DC)

IR ≥ 10 GΩ or I.R × C ≥ 500 seconds whichever is less

Maximum capacitance change as a function of temperature

(temperature characteristic/coefficient):

NP0

X7R

±30 ppm/°C

±15%

Operating temperature range:

NP0/X7R

–55 °C to +125 °C

NOTE

1. Capacitance tolerance ±5% doesn't available for X7R full product range, please contact local sales force before order

www.yageo.com

Mar. 31, 2017 V.6

Product specification

15

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

SOLDERING RECOMMENDATION

Table 15

SOLDERING

METHOD

SIZE

0402

0603

≥ 1.0 µF

< 1.0 µF

0805

≥ 2.2 µF

< 2.2 µF

1206

≥ 4.7 µF

< 4.7 µF

≥ 1210

Reflow only

---

Reflow

≥ 0.1 µF

Reflow/Wave

< 0.1 µF

SOLDERING CONDITIONS

The lead free MLCCs are able to stand the reflow soldering conditions as below:



Temperature: above 220 °C

Endurance: 95 to 120 seconds

Cycles: 3 times

The test of "soldering heat resistance" is carried out in accordance with the schedule of "MIL-STD-202F-method 210F", "The robust

construction of chip capacitors allows them to be completely immersed in a solder bath of 270 °C for 10 seconds". Therefore, it is possible

to mount MLCCs on one side of a PCB and other discrete components on the reverse (mixed PCBs). Surface Mount Capacitors are tested

for solderability at 245 °C during 2 seconds. The test condition for no leaching is 260°C for 30 seconds.

TESTS AND REQUIREMENTS

Table 16 Test procedures and requirements

TEST

TEST METHOD

PROCEDURE

REQUIREMENTS

Mounting

IEC 60384-

21/22

4.3

The capacitors may be mounted on printed-circuit boards or

ceramic substrates

No visible damage

Capacitance

IEC 60384-

21/22

4.5.1 Class 1:

At 20 °C, 24 hours after annealing

Within specified tolerance

f = 1 MHz for C ≤ 1nF, measuring at voltage 1 V_rmsat 20 °C

f = 1 KHz for C > 1nF, measuring at voltage 1 V_rmsat 20 °C

Class 2:

At 20 °C, 24 hours after annealing

f = 1 KHz, measuring at voltage 1 V_rmsat 20 °C

Dissipation

Factor (D.F.)

IEC 60384-

21/22

4.5.2 Class 1:

In accordance with

specification

At 20 °C, 24 hours after annealing

f = 1 MHz for C ≤ 1nF, measuring at voltage 1 V_rmsat 20 °C

f = 1 KHz for C > 1nF, measuring at voltage 1 V_rmsat 20 °C

Class 2:

At 20 °C, 24 hours after annealing

f = 1 KHz, measuring at voltage 1 V_rmsat 20 °C

Insulation

Resistance

IEC 60384-

21/22

4.5.3

At U_r(DC) for 1 minute

In accordance with

specification

www.yageo.com

Mar. 31, 2017 V.6

Product specification

16

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

TEST

TEST METHOD

4.6

PROCEDURE

REQUIREMENTS

Class1:

Capacitance shall be measured by the steps shown in the

following table.

Temperature

coefficient

∆ C/C: ±30ppm

The capacitance change should be measured after 5 min at

each specified temperature stage.

Class2:

X7R: ∆ C/C: ±15%

Step

Temperature(℃)

25±2

Class2:

X7R/X5R: ∆ C/C: ±15%

a

b

c

Lower temperature±3℃

25±2

d

Upper Temperature± 2℃

25±2

e

(1) Class I

Temperature Coefficient shall be calculated from the formula

as below

C2 - C1

Temp, Coefficient =

10⁶[ppm/℃]

C1xΔT

C1: Capacitance at step c

C2: Capacitance at 125℃

∆T: 100℃(=125℃-25℃)

(2) Class II

Capacitance Change shall be calculated from the formula as

below

C2 - C1

∆C =

x 100%

C1

C1: Capacitance at step c

C2: Capacitance at step b or d

High

Temperature

Exposure

AEC-Q200

3

No visual damage

Δ C/C：

Unpowered ; 1000hours @ T=150℃

Measurement at 24±2 hours after test conclusion.

Class1:

NP0: within ±0.5% or 0.5 pF

whichever is greater

Class2:

X7R: ±10%

D.F.:

within initial specified value

IR:

within initial specified value

www.yageo.com

Mar. 31, 2017 V.6

Product specification

17

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

TEST

TEST METHOD

PROCEDURE

REQUIREMENTS

Temperature

Cycling

AEC-Q200

4

Preconditioning;

150 +0/–10 °C for 1 hour, then keep for

No visual damage

24 ±1 hours at room temperature

∆C/C

Class1:

1000 cycles with following detail:

30 minutes at lower category temperature

30 minutes at upper category temperature

NP0: Within ±1% or 0.5pF,

whichever is greater.

Class2:

X7R: ±10%

Recovery time 24 ±2 hours

D.F. meet initial specified value

IR meet initial specified value

Destructive

Physical Analysis

AEC-Q200

5

6

10ea X 3 lots.

Note: Only applies to SMD ceramics.

Electrical test not required.

Moisture

Resistance

No visual damage

T=24 hrs/per cycle; 10 continuous cycles unpowered.

Measurement at 24 ±2 hours after test condition.

∆C/C

NP0: Within ±3% or 3 pF,

whichever is greater

X7R: ±10%

D.F.

Within initial specified value

IR

NP0: ≥ 10,000 MΩ

X7R: Meet initial specified

value

Fig. 4 Moisture resistant

www.yageo.com

Mar. 31, 2017 V.6

Product specification

18

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

TEST

TEST METHOD

AEC-Q200

PROCEDURE

REQUIREMENTS

Biased Humidity

7

1. Preconditioning, class 2 only:

150 +0/-10 °C /1 hour, then keep for

24 ±1 hour at room temp

No visual damage after

recovery

2. Initial measure:

Parameter: IR

Measuring voltage: 1.5V ± 0.1 VDC

Note: Series with 100 KΩ & 6.8 KΩ

Initial requirement:

Class1:

- Connected to 100 KΩ:

C ≤ 10 nF: I.R ≥ 10,000 MΩ

or

3. Test condition:

85 °C, 85% R.H. connected with 100 KΩ resistor, applied

1.5V/U_rfor 1,000 hours.

C > 10 nF: (I.R-100 KΩ) x C

≥ 100s.

4. Recovery:

Class1: 6 to 24 hours

Class2: 24 ±2 hours

- Connected to 6.8 KΩ:

C ≤ 10 nF: I.R ≥ 10,000 MΩ

or

5. Final measure: IR

C > 10 nF: (I.R-6.8 KΩ) x C

≥ 100s.

Class2:

- Connected to 100 KΩ:

C ≤ 25 nF: I.R ≥ 4,000 MΩ or

C > 25 nF: (I.R-100 KΩ) x C

≥ 100s.

- Connected to 6.8 KΩ:

C ≤ 25 nF: I.R ≥ 10,000 MΩ

or

C > 25 nF: (I.R-6.8 KΩ) x C

≥ 100s.

Final measurement:

The insulation resistance shall

be greater than 0.1 time initial

value.

www.yageo.com

Mar. 31, 2017 V.6

Product specification

19

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

TEST

TEST METHOD

PROCEDURE

REQUIREMENTS

Operational Life

AEC-Q200

8

No visual damage

1. Preconditioning, class 2 only:

150 +0/-10 °C /1 hour, then keep for

24 ±1 hour at room temp

∆C/C

NP0: Within ±2% or 1 pF,

whichever is greater

X7R: ±15%

2. Initial measure:

Spec: refer to initial spec C, D, IR

3. Endurance test:

Temperature: X7R: 125 °C

D.F.

Specified stress voltage applied for 1,000 hours:

Applied 2.0 x U_rfor general products

Applied 1.5 x U_rfor high cap. Products

NP0: ≤ 2 x specified value.

X7R: ≤ 16V: ≤ 7%

≥ 25V: ≤ 5%

High voltage series follows with below

stress condition:

IR

NP0: ≥ 4,000 MΩ or IR x C_r≥

Applied 1.5 x Ur for 200V, 250V series

Applied 1.3 x Ur for 500V, 630V series

Applied 1.2 x Ur for 1KV, 2KV, 3KV series

4. Recovery time: 24 ±2 hours

5. Final measure: C, D, IR

40s whichever is less

X7R: ≥ 1,000 MΩ or IRx C_r≥

50s whichever is less

Note: If the capacitance value is less than the minimum value

permitted, then after the other measurements have been

made the capacitor shall be preconditioned according to “IEC

60384 4.1” and then the requirement shall be met.

External Visual

AEC-Q200

9

Any applicable method using × 10 magnification

In accordance with

specification

Physical

Dimension

10

Verify physical dimensions to the applicable device

specification.

In accordance with

specification

Mechanical

Shock

AEC-Q200

13

∆C/C

Three shocks in each direction shall be applied along the three

mutually perpendicular axes of the test specimen (18 shocks)

NP0: Within ±0.5% or 0.5 pF,

whichever is greater

Peak value: 1,500 g’s

Duration: 0.5 ms

X7R: ±10%

Velocity change: 15.4 ft/s

Waveform: Half-sin

D.F.

Within initial specified value

IR

Within initial specified value

Vibration

AEC-Q200

14

∆C/C

5 g’s for 20 minutes, 12 cycles each of 3 orientations.

NP0: Within ±0.5% or 0.5 pF,

whichever is greater

Note:

Use 8” x 5” PCB. 0.31” thick 7 secure points on one long side

and 2 secure points at corners of opposite sides. Parts

mounted within 2” from any secure point. Test from

10-2000 Hz.

X7R: ±10%

D.F: meet initial specified value

IR meet initial specified value

www.yageo.com

Mar. 31, 2017 V.6

Product specification

20

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

TEST

TEST METHOD

AEC-Q200 15

PROCEDURE

REQUIREMENTS

Resistance to

Precondition: 150 +0/–10 °C for 1 hour, then keep for 24 ±1 Dissolution of the end face

Soldering Heat

hours at room temperature

plating shall not exceed 25% of

the length of the edge

concerned

Preheating: for size ≤ 1206: 120 °C to 150 °C for 1 minute

Preheating: for size >1206: 100 °C to 120 °C for 1 minute

and 170 °C to 200 °C for 1 minute

∆C/C

Class1:

Solder bath temperature: 260 ±5 °C

Dipping time: 10 ±0.5 seconds

Recovery time: 24 ±2 hours

NP0: Within ±1% or 0.5 pF,

whichever is greater.

Class2:

X7R: ±10%

D.F. within initial specified

value

IR within initial specified value

No visual damage

Thermal Shock

AEC-Q200

16

1. Preconditioning, class 2 only:

150 +0/-10 °C /1 hour, then keep for 24 ±1 hour at room

temp

∆C/C

NP0: Within ±1% or 1 pF,

whichever is greater

X7R: ±15%

2. Initial measure:

Spec: refer to initial spec C, D, IR

3. Rapid change of temperature test:

NP0/X7R: -55 °C to +125 °C; 300 cycles

15 minutes at lower category temperature; 15 minutes at

upper category temperature.

D.F: meet initial specified value

IR meet initial specified value

4. Recovery time:

Class1: 6 to 24 hours

Class2: 24 ±2 hours

5. Final measure: C, D, IR

ESD

AEC-Q200

17

18

A component passes a voltage

level if all components stressed

at that voltage level pass.

Per AEC-Q200-004

Solderability

Preheated to a temperature of 80 °C to 140 °C and

maintained for 30 seconds to 60 seconds.

The solder should cover over

95% of the critical area of each

termination.

Test conditions for lead containing solder alloy

Temperature: 235 ±5 °C

Dipping time: 2 ±0.2 seconds

Depth of immersion: 10 mm

Alloy Composition: 60/40 Sn/Pb

Number of immersions: 1

Test conditions for lead-free containing solder alloy

Temperature: 245 ±5 °C

Dipping time: 3 ±0.3 seconds

Depth of immersion: 10 mm

Alloy Composition: SAC305

Number of immersions: 1

www.yageo.com

Mar. 31, 2017 V.6

Product specification

21

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

TEST

TEST METHOD

AEC-Q200 19

PROCEDURE

REQUIREMENTS

Electrical

Characterization

Parametrically test per lot and sample size requirements,

summary to show Min, Max, Mean and Standard deviation at

room as well as Min and Max operating temperatures.

∆C/C

Class 1:

NP0: ±30 ppm/°C

Class2:

Class 1:

NP0: -55 °C to +125 °C

Normal temperature: 20 °C

X7R: ±15%

Class 2:

X7R: -55 °C to +125 °C

Normal temperature: 20 °C

Board Flex

AEC-Q200

21

Part mounted on a 100 mm X 40 mm FR4 PCB board, which No visible damage

is 1.6 ±0.2 mm thick and has a layer-thickness 35 µm ± 10

µm.

∆C/C

Class1:

Part should be mounted using the following soldering reflow

profile.

NP0: Within ±1% or 0.5 pF,

whichever is greater

Conditions:

Class2:

Class1:

X7R: ±10%

Bending 3 mm at a rate of 1 mm/s, radius jig 340 mm

Class2:

Bending 2 mm at a rate of 1 mm/s, radius jig 340 mm

Test Substrate:

b

YNSC147

4.5

Dimension(mm)

Type

0201

0402

0603

0805

1206

1210

1808

a

b

c

0.3

0.4

1.0

1.2

2.2

3.5

0.9

1.5

3.0

0.3

0.5

1.2

C

40

a

4.0 1.65

5.0 1.65

100

unit: mm

5.0

7.0

2.0

3.7

Terminal

Strength

AEC-Q200

22

With the component mounted on a PCB obtained with the

device to be tested, apply a 17.7N (1.8Kg) force to the side of may be employed for

Magnification of 20X or greater

a device being tested.

inspection of the mechanical

integrity of the device body,

terminals and body/terminal

junction.

This force shall be applied for 60+1 seconds.

Also the force shall be applied gradually as not to apply a

shock to the component being tested.

Before, during and after the

test, the device shall comply

with all electrical requirements

stated in this specification.

* Apply 2N force for 0402 size.

www.yageo.com

Mar. 31, 2017 V.6

Product specification

22

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

TEST

TEST METHOD

AEC-Q200 23

PROCEDURE

REQUIREMENTS

Beam Load Test

≤ 0805

Place the part in the beam load fixture. Apply a force until the

part breaks or the minimum acceptable force level required in

the user specification(s) is attained.

Thickness > 0.5mm: 20N

Thickness ≤ 0.5mm: 8N

≥ 1206

Thickness ≥1.25 mm: 54N

Thickness < 1.25 mm: 15N

Note: Classify the components according to the highest ESD voltage level survived during

ESD testing.

Fig. 5 Passive component HBM ESD test flow diagram (DC = Direct Contact Discharge, AD = Air Discharge)

www.yageo.com

Mar. 31, 2017 V.6

Product specification

23

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

REVISION HISTORY

REVISION DATE

CHANGE NOTIFICATION DESCRIPTION

Version 6

Mar.31, 2017

-

- Add NPO/0603/1nF/50V, X7R/0603/1uF/10V, X7R/0603/470nF/16V,

X7R/0603/220nF/25V

Version 5

Version 4

Version 3

Version 2

Version 1

Version 0

Nov. 15, 2016

Jun. 14, 2016

Jul. 21, 2015

Jul. 17, 2014

Apr. 19, 2013

Dec. 25, 2012

-

- Add Soldering Condition

- Add X7R/0805/2.2uF/10V and NPO/1206/1.2nF to 1.5nF/250V

- Tests and Requirements update

- Capacitance range update

- New

www.yageo.com

Mar. 31, 2017 V.6

Product specification

24

NP0/X7R 6.3 V to 630 V

Automotive grade

Surface-Mount Ceramic Multilayer Capacitors

LEGAL DISCLAIMER

Yageo, its distributors and agents (collectively, “Yageo”), hereby disclaims any and all liabilities for any errors,

inaccuracies or incompleteness contained in any product related information, including but not limited to

product specifications, datasheets, pictures and/or graphics. Yageo may make changes, modifications and/or

improvements to product related information at any time and without notice.

Yageo makes no representation, warranty, and/or guarantee about the fitness of its products for any particular

purpose or the continuing production of any of its products. To the maximum extent permitted by law, Yageo

disclaims (i) any and all liability arising out of the application or use of any Yageo product, (ii) any and all

liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied

warranties, including warranties of fitness for a particular purpose, non-infringement and merchantability.

Yageo statements regarding the suitability of products for certain types of applications are based on Yageo’s

knowledge of typical operating conditions for such types of applications in a generic nature. Such statements

are neither binding statements of Yageo nor intended to constitute any warranty concerning the suitability for a

specific customer application or use. They are intended for use only by customers with requisite knowledge and

experience for determining whether Yageo products are the correct products for their application or use. In

addition, unpredicatable and isolated cases of product failure may still occur, therefore, customer application or

use of Yageo products which requires higher degree of reliability or safety, shall employ additional protective

safeguard measures to ensure that product failure would not result in personal injury or property damage.

Yageo products are not designed for application or use in medical, life-saving, or life-sustaining devices or for

any other application or use in which the failure of Yageo products could result in personal injury or death.

Customers using or selling Yageo products not expressly indicated for above-mentioned purposes shall do so at

their own risk and agree to fully indemnify Yageo and hold Yageo harmless.

Information provided here is intended to indicate product specifications only. Yageo reserves all the rights for

revising this content without further notification, as long as products are unchanged. Any product change will

be announced by PCN.

www.yageo.com

Mar. 31, 2017 V.6


型号：	AC0603BKNPO0BB
厂家：	YAGEO CORPORATION
描述：	SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS
文件：	总24页 (文件大小：1763K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

AC0603BKNPO0BB [YAGEO]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E