ATV321GR-7H5DBL [YAGEO]
CHIP RESISTORS RF ATTENUATORS;型号: | ATV321GR-7H5DBL |
厂家: | YAGEO CORPORATION |
描述: | CHIP RESISTORS RF ATTENUATORS 衰减器 |
文件: | 总7页 (文件大小:217K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CHIP RESISTORS RF ATTENUATORS
ATV321 (Pb Free)
SIZE 0404
Product specification
2
7
SERIES
V321 (0404) / Pb Free
AT
Chip Resistors RF Attenuators
SCOPE
This specification describes ATV321 series chip attenuators with lead-free terminations made by thick film process.
ORDERING INFORMATION
Part number is identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and
resistance value.
YAGEO ORDERING CODE
CTC CODE
ATV321 X X X XX XXXX L
( ) ( ) ( ) ( )
( )
5
( )
6
1
2
3
4
Attenuation value, tolerance v.s. 12 NC code
( )
1 TOLERANCE
Attenuation Standard
Optional
B = ±0.2 dB
C = ±0.3 dB
D = ±0.5 dB
F = ±1 dB
value (dB)
Tol.(dB) 12 NC
Tol.(dB) 12 NC
±0.3 2350 703 11012 L ±0.2 2350 703 11011 L
±0.3 2350 703 11022 L ±0.2 2350 703 11021 L
±0.3 2350 703 11032 L ±0.2 2350 703 11031 L
±0.3 2350 703 11042 L ±0.2 2350 703 11041 L
±0.3 2350 703 11052 L ±0.2 2350 703 11051 L
±0.5 2350 703 11063 L ±0.3 2350 703 11062 L
±0.5 2350 703 11073 L ±0.3 2350 703 11072 L
±0.5 2350 703 11083 L ±0.3 2350 703 11082 L
±0.5 2350 703 11093 L ±0.3 2350 703 11092 L
±0.5 2350 703 11103 L ±0.3 2350 703 11102 L
±1.0 2350 703 11154 L ±0.5 2350 703 11153 L
±2.0 2350 703 11205 L ±1.0 2350 703 11204 L
1
2
3
4
5
6
7
8
9
G = ±2 dB
( )
2 PACKAGING TYPE
R = Paper/PE taping reel
( )
3 TEMPERATURE COEFFICIENT OF RESISTANCE
– = Not applicable
( )
4 TAPING REEL
10
15
20
07 = 7 inch dia. Reel
7H = Half quality packing on 7"reel
(non preferrend)
ORDERING EXAMPLE
( )
5 ATTENUATION VALUE
The ordering code of an ATV321 attenuator with
2±0.3 dB attenuation, supplied in 7-inch tape reel is:
ATV321CR-072dBL.
1 dB to 20 dB shown in the table of “Attenuation value,
tolerance v.s. 12 NC code”.
(6) RESISTOR TERMINATIONS
NOTE
L = Lead free terminations (pure Tin)
1. The “L” at the end of the code is only for ordering. On the reel
label, the standard CTC will be mentioned an additional stamp
“LFP”= lead free production.
2. Products with lead in terminations fulfil the same requirements
as mentioned in this datasheet.
3. Products with lead in terminations will be phased out in the
coming months (before July 1st, 2006)
www.yageo.com
Oct 12, 2004 V.0
Product specification
3
7
SERIES
V321 (0404) / Pb Free
AT
Chip Resistors RF Attenuators
MARKING
No marking.
CONSTRUCTION
The attenuators are constructed on a high-grade
ceramic body (aluminium oxide). The internal
The rectangular marker designates input pin 1.
circuit is applied to the top surface of the substrate,
and its design determines the required attenuation
value. The attenuation layer is covered with a
protective coating and a marking dot indicates input
pin 1 as shown in the connection diagram of Fig.1.
1
3
input
signal
attenuated
output signal
Finally, the four external end terminations are
added. To guarantee optimum solderability the
outer layer of the terminations are lead free (pure
Tin).
2
4
HBK077
Fig. 1 Connection diagram
DIMENSIONS
Table 1
L
TYPE
ATV321
P
A
T
L (mm)
W (mm)
T (mm)
A (mm)
B (mm)
P (mm)
D (mm)
1.0 ±0.10
1.0 ±0.10
B
D
W
0.35 ±0.05
0.33 ±0.10
0.15 ±0.10
0.65 ±0.10
0.25 ±0.10
SCR019
For dimension see Table 1
Fig. 2 Attenuator dimensions
www.yageo.com
Oct 12, 2004 V.0
Product specification
4
7
SERIES
V321 (0404) / Pb Free
AT
Chip Resistors RF Attenuators
ELECTRICAL CHARACTERISTICS
FOOTPRINT AND SOLDERING
PROFILES
Table 2
For recommended footprint and
soldering profiles, please see the
special data sheet “Chip resistors
mounting”.
ATV321 / 40 mW
1 dB to 20 dB
CHARACTERISTICS
Attenuation Range
1 dB to 5 dB ±0.3 dB (optional: ±0.2 dB)
6 dB and 10 dB ±0.5 dB (optional: ±0.3 dB)
15 dB ±1.0 dB (optional: ±0.5 dB)
20 dB ±2.0 dB (optional: ±1.0 dB)
50 Ω
Attenuation tolerance
ENVIRONMENTAL DATA
For material declaration
information (IMDS-data) of the
products, please see the
separated info “Environmental
data”.
Characteristic impedance
Frequency Range
1 dB to 10 dB DC to 2.5 GHz
15 dB and 20 dB DC to 2.0 GHz
1.3 max.
VSWR
Maximum permissible voltage
Power rating
50 V (DC or RMS)
40 mW
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PRODUCT TYPE
ATV321
PACKING STYLE
REEL DIMENSION
QUANTITY PER REEL
Paper / PE Taping Reel (R)
7" (178 mm)
10,000 units
7" (half quality packing)
5,000 units / not preferred
NOTE
1. For Paper/PE tape and reel specification/dimensions, please see the special data sheet “Packing” document.
FUNCTIONAL DESCRIPTION
POWER RATING
MLB206
ndbook, halfpage
P
max
ATV321rated power at 70°C is 40 mW
(%P
rated
)
100
50
0
RATED VOLTAGES
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V=√(P X R)
55
0
50 70
100
T
125
( C)
o
Where
amb
V=Continuous rated DC or
AC (rms) working voltage (V)
Fig. 3 Maximum dissipation (P ) in percentage of rated power
max
as a function of the operating ambient temperature (T
)
amb
P=Rated power (W)
R=Resistance value (X)
www.yageo.com
Oct 12, 2004 V.0
Product specification
5
7
SERIES
V321 (0404) / Pb Free
AT
Chip Resistors RF Attenuators
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
MIL-STD-202F-method 107G;
IEC 60115-1 4.19
Thermal Shock
At –65 (+0/–10) °C for 2 minutes and at +125
(+10/–0) °C for 2 minutes; 25 cycles
Max.: ±0.3 dB
No visible damage
MIL-R-55342D-Para 4.7.5;
IEC 60115-1 4.13
Short Time
Overload
2.5 × RCWV applied for 5 seconds at room
temperature
Max.: ±0.3 dB
No visible damage
MIL-STD-202F-method 302;
IEC 60115-1 4.6.1.1
Insulation
Resistance
RCOV for 1 minute
≥10 GΩ
ATV321
Type
Voltage (DC)
50 V
MIL-STD-202F-method 210C;
IEC 60115-1 4.18
Resistance to
Soldering
Heat
Unmounted chips; 260 ±5 °C for 10 ±1
seconds
Max.: ±0.1 dB
No visible damage
MIL-STD-202F-method 108A;
IEC 60115-1 4.25.1
Life
At 70±2 °C for 1,000 hours; RCWV applied for
1.5 hours on and 0.5 hour off
Max.: ±0.3 dB
MIL-STD-202F-method 208A;
IEC 60115-1 4.17
Solderability
Solder bath at 245±3 °C
Well tinned (≥95% covered)
Dipping time: 2±0.5 seconds
No visible damage
JIS C 5202.6.14;
Bending
Strength
Max.: ±0.3 dB
Resistors mounted on a 90 mm glass epoxy
resin PCB (FR4)
IEC 60115-1 4.15
No visible damage
Bending: 5 mm
JIS C 5202 7.5;
Humidity
1,000 hours; 40±2 °C; 93(+2/–3)% RH
Max.: ±0.3 dB
(steady state)
IEC 60115-8 4.24.8
RCWV applied for 1.5 hours on and 0.5 hour off
EIA/IS 4.13B;
Leaching
Solder bath at 260±5 °C
No visible damage
IEC 60115-8 4.18
Dipping time: 30±1 seconds
MIL-STD-202F-method 106F;
IEC 60115-1 4.24.2
Moisture
Resistance
Heat
42 cycles; total 1,000 hours
Shown as Fig. 4
Max.: ±0.3 dB
No visible damage
www.yageo.com
Oct 12, 2004 V.0
Product specification
6
7
SERIES
V321 (0404) / Pb Free
AT
Chip Resistors RF Attenuators
80 − 98%
RH
80 − 98%
RH
75
90 − 98% RH
90 − 98% RH
90 − 98% RH
temperature
[°C]
initial drying
24 hours
rate of change of temperature is unspecified,
however, specimens shall not be subjected to
radiant heating from chamber conditioning processes
50
25
0
end of final cycle;
measurements
as specified in 237
+10 °C (+18 °F)
−2 °C (−±36 °F)
initial measurements
as specified in 232
circulation of conditioning air shall be at a
minimum cubic rate per minute equivalent to
10 times the volume of the chamber
optional sub-cycle if specified
(23±); sub-cycle performed during
any 5 of the first 9 cycles; humidity
uncontrolled during sub-cycle
temperature
tolerance
±2 °C (±±36 °F)
unless otherwise
specified
voltage applied as specified in 234
STEP1
STEP2 STEP±
one cycle 24 hours; repeat as specified in 235
10 15
STEP4
STEP5 STEP6
STEP7
prior to first
cycle only
0
5
20
25
HBK07±
time [h]
Fig. 4 Moisture resistance test requirements
www.yageo.com
Oct 12, 2004 V.0
Product specification
7
7
SERIES
V321 (0404) / Pb Free
AT
Chip Resistors RF Attenuators
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION DESCRIPTION
Version 0
Oct 12, 2004
-
- First issue of this specification for ATV321 series with lead-free
terminations
www.yageo.com
Oct 12, 2004 V.0
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明