MBPL1217B-R30-KS [YAGEO]

General Purpose Inductor, 0.3uH, 10%, 1 Element,;


型号：	MBPL1217B-R30-KS
厂家：	YAGEO CORPORATION
描述：	General Purpose Inductor, 0.3uH, 10%, 1 Element, 测试功率感应器电感器
文件：	总3页 (文件大小：61K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

YAGEO CORPORATION SMD INDUCTOR/BEADS

DIP Power Inductors

MBPL Series

Features

• Magnetic shielded construction for high density board assembly

• High performance execllent DC current characteristics

• Large energy storage capacity

• Up to 40 amps continuous

• Custom designs available

PRODUCT IDENTIFICATION

MBPL

Internal No.

Tolerance

Inductance

Packaging(B:bulk)

Dimensions

Product Symbol

ELECTRICAL CHARACTERISTICS MBPL SERIES

PART

NO.

INDUCTANCE TOLERANCE

TEST

SER

RATED

SHAPEAND DIMENSIONS

MBPL1319

(r%)

FREQUENCY

(KHZ)

MIN.

RESISTANCE

(m:)MAX

CURRENT

(A)MIN

(PH)

MBPL1319B-R30M-S 0.30

MBPL1319B-R60M-S 0.60

MBPL1319B-R90M-S 0.90

MBPL1319B-1R2M-S 1.20

MBPL1220B-1R2M-S 1.20

MBPL1220B-1R5M-S 1.50

MBPL1217B-R30M-S 0.30

MBPL1217B-R60M-S 0.60

MBPL1217B-R90M-S 0.90

20%

100

0.5

1.0

1.8

0.7

1.5

MBPL1220

MBPL1217

Note: * at 25MHZ ** at 7.9MHZ

When ordering please specify tolerance and packaging code.

Ex : PMC129- R60M-S Tolerance: Mr20%, Lr15%, Kr10% Packaging: ClearTape and Reel (Standard)

L Q :HP4287A SRF :HP8753D/E4991A RDC: Digital Multimeter SC-7401

OperatingTemperature ºC Range -40qC to +125qC

Dimensions : mm

TAPE DIMENSIONS

TAPE MATERIAL

Dimensions : mm

CarrierTape : Polystyrene

CoverType : Polyethylene

160mm MIN

Blank Part

Blank

330mm MIN

Leader

Chip Mounting

Part

Coover Tape

REEL DIMENSIONS

RECOMMENDED PATTERN

Land Pattern

Dimensions : mm

TYPE

TAPE

DIMENSIONS

REEL

DIMENSIONS

RECOMMENDED

PATTERN

QUANTITY

/REEL

PMC129

PMC127

PMC125

13.9

14.2

11.5

330

100

32.5

6.2

250

300

PMC SERIES RELIABILITY TEST

1-1 MECHANICAL PERFORMANCE

NO. ITEM

SPECIFICATION

Appearance :No Damage

L Change :withinr10%

Q Change :withinr30%

RDC:within Specificadion

Appearance :No Damage

TEST CONDITIONS

Test device shall solderd on the substrate

Oscillation frequency:10 to 50 to 10HZ for IMin

Amplitude : 1.5mm

1-1-1

1-1-2

1-1-3

Vibration

Time :2Hrs,for each Axis (X,Y&Z),Total 6Hrs

Pre-heating: 150ºC , lMin.

Resistance to

Soldering Heat

Solder Composition: Sn/Pb=63/37

Solder Temperature: 260r5ºC

lmmersion Time: 10r lSec.

Solderability

The electrodes shall be at least 90% covered

with new solder coating.

Pre-heating: 150ºC , lMin.

Solder Composition: Sn/Pb=63/37

Solder Temperature: 230r5ºC

lmmersion Time: 4r lSec.

1-2 ENVIRONMENTAL PERFORMANCE

ITEM

SPECIFICATION

Appearance: No Damage

L Change: within r 10%

L Change: within r 30%

RDC: within Speciflcation

TEST CONDITIONS

1-2-1

Temperature Shock

10 Cycles (Air to Air) l Cycles shall Consist of:

30Min.Exposure to -55ºC

30Min.Exposure to -125ºC

15Sec.Max.Transition between Temperatures

Measured after Exposure in the Room Condition for 24Hrs.

One Cycle

1-2-2

Temperature Cycle

Step

Temperature(ºC) Time (Min.)

-25r3

25r2

85r3

25r2

Total: 100Cycles

Measured after Exposure in the Room Condition for 24Hrs.

Temperature: 40r2ºC

1-2-3

1-2-4

Humidity Resistance

Relative Humidity: 90~95%

Time: 1000Hrs.

Measured after Exposure in the Room Condition for 24Hrs.

Temperature: 85r3ºC

High Temperature

Resistance

Relative Humidity: 20%

Applied Current: Rated Current

Time: 1000Hrs.

Measured after Exposure in the Room Condition for 24Hrs.

Temperature: -25r3ºC

1-2-5

Low Temperature

Resistance

Relative Humidity: 0%

Time: 1000Hrs.

Measured after Exposure in the Room Condition for 24Hrs.

相关型号：