RV0603JR-07976KL [YAGEO]
HIGH VOLTAGE CHIP RESISTORS;型号: | RV0603JR-07976KL |
厂家: | YAGEO CORPORATION |
描述: | HIGH VOLTAGE CHIP RESISTORS 高压 |
文件: | 总9页 (文件大小:928K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HIGH VOLTAGE CHIP RESISTORS
RV series
0.5%, 1%, 5%
sizes 0603/0805/1206/2010/2512
RoHS compliant
Product specification
2
9
SERIES
0603/0805/1206/2010/2512 (RoHS Compliant)
RV
Chip Resistor Surface Mount
ji3
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC
This specification describes
RV0603/0805/1206/2010/2512
high voltage chip resistors with
lead-free terminations made by
thick film process.
Both part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
YAGEO BRAND ordering code
(
)
GLOBAL PART NUMBER PREFERRED
RV XXXX X X X XX XXXX L
( )
1
( ) ( ) ( ) ( )
( )
6
( )
7
2
3
4
5
APPLICATIONS
Converter
Printer equipment
Battery charger
Computer
( )
1 SIZE
0603/0805/1206/2010/2512
( )
2 TOLERANCE
D = ±0.5%
Power supply
F = ±1%
J = ±5%
FEATURES
RoHS compliant
( )
3 PACKAGING TYPE
R = Paper/PE taping reel
K = Embossed taping reel
Reducing environmentally
hazardous wastes
High component and equipment
( )
4 TEMPERATURE COEFFICIENT OF RESISTANCE
reliability
– = Base on spec
Non-forbidden materials used in
products/production
( )
5 TAPING REEL
Halogen Free Epoxy
07= 7 inch dia. Reel
Moisture sensitivity level: MSL 1
( )
6 RESISTANCE VALUE
There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need
to mention the last zero after R/K/M, e.g.1K2, not 1K20.
Detailed resistance rules show in table of “Resistance rule of global part number”.
(7) DEFAULT CODE
Letter L is system default code for ordering only (Note)
Resistance rule of global part
number
ORDERING EXAMPLE
The ordering code of a RV1206
chip resistor, value 1 MΩ with
±5% tolerance, supplied in 7-inch
tape reel is: RV1206JR-071ML.
Resistance code rule
Example
XXKX
(10 to 97.6 KΩ)
10K = 10,000 Ω
97K6 = 97,600 Ω
XXXK
(100 to 976 KΩ)
100K = 10,000Ω
976K = 976,000Ω
NOTE
1. All our R-Chip products meet RoHS
compliant. "LFP" of the internal 2D reel
label mentions "Lead Free Process"
XMXX
(1 to 9.76 MΩ)
1M = 1,000,000 Ω
9M76 = 9,760,000 Ω
2. On customized label, "LFP" or specific
symbol printed and the optional "L" at
the end of GLOBAL PART NUMBER /
12NC can be added (both are on
customer request)
XXMX
(10 to 16 MΩ)
10M = 10,000,000 Ω
27M = 27,000,000 Ω
www.yageo.com
Dec. 05, 2016 V.6
Product specification
3
9
SERIES
0603/0805/1206/2010/2512 (RoHS Compliant)
RV
Chip Resistor Surface Mount
PHYCOMP BRAND ordering codes
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp
brand products.
(
)
GLOBAL PART NUMBER PREFERRED
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC CODE
2322
XXX XXXXX L
Last digit of 12NC
Resistance decade (3)
Last digit
( )
(1)
(2)
(3)
4
0.01 to 0.0976
Ω
EMBOSSED (2) PAPER/PE (2)
TAPE ON REEL TAPE ON REEL (units)
4,000
0
7
8
9
1
2
3
4
5
6
START
IN (1)
TOL. RESISTANCE
(%) RANGE
0.1 to 0.976
Ω
SIZE TYPE
5,000
1 to 9.76
Ω
0805 VRC11
VRC12
2322 ±5% 47 to 10M Ω
2322 ±1% 47 to 10M Ω
2322 ±5% 47 to 27M Ω
2322 ±1% 47 to 10M Ω
2322 ±5% 47 to 16M Ω
-
792 61xxx
793 6xxxx
790 61xxx
791 6xxxx
-
10 to 97.6
100 to 976
Ω
-
Ω
1206 VRC01
VRC02
-
1 to 9.76 K
Ω
-
10 to 97.6 K
Ω
2512 VPRC221
762 98xxx
100 to 976 K
Ω
(1) The resistors have a 12-digit ordering code starting with 2322.
1 to 9.76 M
Ω
(2) The subsequent 4 or 5 digits indicate the resistor tolerance and
packaging.
10 to 97.6 M
Ω
Example:
0.02
0.3
=
=
=
=
=
0200 or 200
3007 or 307
1008 or 108
3303 or 333
1006 or 106
Ω
Ω
(3) The remaining 4 or 3 digits represent the resistance value with the
last digit indicating the multiplier as shown in the table of
“Last digit of 12NC”.
Ω
1
Ω
(4) "L" is optional symbol (Note)
.
33 K
10 M
ORDERING EXAMPLE
Ω
The ordering code of a VRC01 resistor, value 1 MΩ with ±5% tolerance,
supplied in tape of 5,000 units per reel is: 232279061105L or
RV1206JR-071ML.
NOTE
1. All our R-Chip products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART
NUMBER / 12NC can be added (both are on customer request)
www.yageo.com
Dec. 05, 2016 V.6
Product specification
4
9
SERIES
0603/0805/1206/2010/2512 (RoHS Compliant)
RV
Chip Resistor Surface Mount
MARKING
RV0603/0805/1206/2010/2512
E-24 series: 3 digits, ±5%
03
First two digits for significant figure and 3rd digit for number of zeros
Fig. 1 Value=10 KΩ
RV0603
E-24 series: 3 digits, ±0.5% & ±1%
0
One short bar under marking letter
Fig. 2 Value=24Ω
E-96 series: 3 digits, ±0.5% & ±1%
First two digits for E-96 marking rule and 3rd letter for number of zeros
Fig. 3 Value=12.4 KΩ
RV0805/1206/2010/2512
Both E-24 and E-96 series: 4 digits, ±0.5% & ±1%
00
First three digits for significant figure and 4th digit for number of zeros
Fig. 4 Value=10 KΩ
For further marking information, please refer to data sheet “Chip resistors marking”.
CONSTRUCTION
The resistor is constructed on top of a high-grade
OUTLINES
ceramic body. Internal metal electrodes are added on
For dimension see Table 1
each end to make the contacts to the thick film resistive
element. The composition of the resistive element is a
noble metal imbedded into a glass and covered by a
second glass to prevent environment influences. The
resistor is laser trimmed to the rated resistance value.
The resistor is covered with a protective epoxy coat,
finally the two external terminations (matte tin on Ni-
barrier) are added. See fig.5
DIMENSIONS
Table 1 For outlines see fig. 5
TYPE
L (mm) W (mm) H (mm) I1 (mm) I2 (mm)
1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15
2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20
3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.40 ±0.20 0.45 ±0.20
5.00±0.10 2.50±0.15 0.55±0.10 0.45±0.15 0.50±0.20
6.35 ±0.10 3.10 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
RV0603
RV0805
RV1206
RV2010
RV2512
Fig. 5 Chip resistor outlines
www.yageo.com
Dec. 05, 2016 V.6
Product specification
5
9
SERIES
0603/0805/1206/2010/2512 (RoHS Compliant)
RV
Chip Resistor Surface Mount
ELECTRICAL CHARACTERISTICS
Table 2
CHARACTERISTICS
Rated
Power Temperature
Range
Operating
Max.
Working
Voltage
Max.
Overload
Voltage
Dielectric Temperature
RESISTANCE
RANGE
TYPE
Withstanding
Coefficient
Voltage of Resistance
5% (E-24) 47Ω to 10MΩ
RV0603
RV0805
RV1206
RV2010
RV2512
1% (E-24/E-96) 47Ω to 10MΩ
0.5% (E-24/E-96) 47Ω to 10MΩ
1/10W
1/8 W
350V
400 V
500 V
500 V
500 V
500V
800 V
500V
5% (E-24) 47Ω to 22MΩ
1% (E-24/E-96) 47Ω to 22MΩ
0.5% (E-24/E-96) 47Ω to 10MΩ
800 V
5% (E-24) 47Ω to 27MΩ
1% (E-24/E-96) 47Ω to 27MΩ
0.5% (E-24/E-96) 47Ω to 15MΩ
–55 °C to
+155 °C
1/4 W
1,000 V
1,000 V
1,000 V
1,000 V
1,000 V
1,000 V
±200 ppm/°C
5% (E-24) 47Ω to 22MΩ
3/4W
1% (E-24/E-96) 47Ω to 22MΩ
0.5% (E-24/E-96) 47Ω to 10MΩ
5% (E-24) 47Ω to 16MΩ
1% (E-24/E-96) 47Ω to 16MΩ
1 W
0.5% (E-24/E-96) 47Ω to 10MΩ
FOOTPRINT AND SOLDERING PROFILES
For recommended footprint and soldering profiles, please refer to data sheet “Chip resistors mounting”.
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PACKING STYLE
REEL
RV0603
RV0805
RV1206
RV2010
RV2512
DIMENSION
Paper/PE taping reel (R)
Embossed taping reel (K)
---
7" (178 mm)
7" (178 mm)
5,000
---
5,000
---
5,000
---
---
4,000
4,000
NOTE
1. For Paper/PE/Embossed tape and reel specification/dimensions, please refer to data sheet “Chip resistors packing”.
www.yageo.com
Dec. 05, 2016 V.6
Product specification
6
9
SERIES
0603/0805/1206/2010/2512 (RoHS Compliant)
RV
Chip Resistor Surface Mount
FUNCTIONAL DESCRIPTION
OPERATING TEMPERATURE RANGE
Range: –55 °C to +155 °C
POWER RATING
Each type rated power at 70 °C:
RV0603=1/10W; RV0805=1/8W; RV1206=1/4W;
RV2010=3/4W; RV2512=1W
RATED VOLTAGE
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
Fig. 6 Maximum dissipation (P ) in percentage of rated power
max
ꢀ
ꢄ
V = ꢁ ꢂ ꢃ
as a function of the operating ambient temperature (T
)
amb
or max. working voltage whichever is less
Where
(
)
( )
V = Continuous rated DC or AC rms working voltage V
(
)
P = Rated power W
( )
R = Resistance value Ω
Maximum working voltage can be applicable to resistors only if the resistance value is equal to or higher than
the critical resistance value.
www.yageo.com
Dec. 05, 2016 V.6
Product specification
7
9
SERIES
0603/0805/1206/2010/2512 (RoHS Compliant)
RV
Chip Resistor Surface Mount
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Life/
Operational Life/
Endurance
MIL-STD-202G-method 108A
IEC 60115-1 4.25.1
1,000 hours at 70±5 °C applied RCWV
1.5 hours on, 0.5 hour off, still air required
±(2%+0.05 Ω)
JIS C 5202-7.10
High
Temperature
Exposure/
Endurance at
upper category
temperature
MIL-STD-202G-method 108A
IEC 60115-1 4.25.3
1,000 hours at maximum operating temperature
depending on specification, unpowered
±(1%+0.05 Ω)
No direct impingement of forced air to the parts
Tolerances: 155±3 °C
JIS C 5202-7.11
Moisture
Resistance
MIL-STD-202G-method 106F
IEC 60115-1 4.24.2
Each temperature / humidity cycle is defined at 8
hours (method 106F), 3 cycles / 24 hours for 10d
with 25 °C / 65 °C 95% R.H, without steps 7a &
7b, unpowered
±(2%+0.05 Ω)
Parts mounted on test-boards, without
condensation on parts
Measurement at 24±2 hours after
test conclusion
Thermal Shock
MIL-STD-202G-method 107G
-55/+125 °C
±(0.5%+0.05 Ω) for 10 KΩ to
10 MΩ
Note: Number of cycles required is 300.
Maximum transfer time is 20 seconds. Dwell time
is 15 minutes. Air – Air
±(1%+0.05 Ω) for others
Short time
overload
MIL-R-55342D-para 4.7.5
IEC60115-1 4.13
2.5 times RCWV or maximum overload voltage
whichever is less for 5 sec at room temperature
±(2%+0.05 Ω)
No visible damage
Board Flex/
Bending
IEC60115-1 4.33
Device mounted on PCB test board as described,
only 1 board bending required
±(1%+0.05 Ω)
No visible damage
Bending for 0603 & 0805: 3mm
1206 & above: 2mm
Holding time: minimum 60 seconds
Ohmic value checked during bending
Humidity
IEC 60115-1 4.24.8
±(3.0%+0.05Ω )
Steady state for 1,000 hours at 40℃ / 95% R.H.
RCWV applied for 1.5 hours on and 0.5 hour off
www.yageo.com
Dec. 05, 2016 V.6
Product specification
8
9
SERIES
0603/0805/1206/2010/2512 (RoHS Compliant)
RV
Chip Resistor Surface Mount
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Solderability
- Wetting
Well tinned (≥95% covered)
IPC/JEDECJ-STD-002B test B
IEC 60068-2-58
Electrical Test not required
Magnification 50X
No visible damage
SMD conditions:
1st step: method B, aging 4 hours at 155 °C
dry heat
2nd step: leadfree solder bath at 245±3 °C
Dipping time: 3±0.5 seconds
- Leaching
IPC/JEDECJ-STD-002B test D
IEC 60068-2-58
Leadfree solder, 260 °C, 30 seconds
immersion time
No visible damage
- Resistance to
Soldering Heat
MIL-STD-202G-method 210F
IEC 60068-2-58
Condition B, no pre-heat of samples
±(1%+0.05 Ω)
Leadfree solder, 260 °C, 10 seconds
immersion time
No visible damage
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
www.yageo.com
Dec. 05, 2016 V.6
Product specification
9
9
SERIES
0603/0805/1206/2010/2512 (RoHS Compliant)
RV
Chip Resistor Surface Mount
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION DESCRIPTION
Version 6
Dec. 01, 2016
- Extend resistor value of RV1206 0.5%
-
Version 5
Version 4
Aug. 27, 2015
Jan. 27, 2014
- Extend resistor range and add 0.5%
-
-
- RV0603 resistance range extend to 10MΩ
- Add RV2010
Version 3
Version 2
Version 1
Aug. 26, 2013
Sep 29, 2011
Nov 19, 2008
-
-
-
- Add RV0603
- Type error correction
- Change to dual brand datasheet that describes RV0805/1206/2512 with
RoHS compliant
- Description of "Halogen Free Epoxy" added
- Define global part number
Version 0
Feb 14, 2006
-
- New datasheet for high voltage chip resistors sizes of 0805/1206/2512,
5%, 1% tolerance with lead-free terminations
- Replace the 0805/1206/2512 parts of pdf files:
VRC01_02_11_12_51_3.pdf, VPRC221_5_3.pdf, and combine into a
document.
- Test method and procedure updated
- PE tape added (paper tape will be replaced by PE tape)
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
Dec. 05, 2016 V.6
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明