YC124-JR-07560RE [YAGEO]
RES ARRAY 4 RES 560 OHM 0804;型号: | YC124-JR-07560RE |
厂家: | YAGEO CORPORATION |
描述: | RES ARRAY 4 RES 560 OHM 0804 |
文件: | 总12页 (文件大小:855K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ARRAY CHIP RESISTORS
YC/TC
5%, 1%
sizes
YC:102/104/122/124/162/164/248/324/158T/358L/358T
TC: 122/124/164
RoHS compliant
Product specification
2
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC
This specification describes
YC (convex, flat) and TC (concave)
series chip resistor arrays with lead-
free terminations made by thick film
process.
Both part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
YAGEO BRAND ordering code
(
)
GLOBAL PART NUMBER PREFERSRED
YC
TC
XXXX X X X X XX XXXX L/T
(1)
(2) (3) (4) (5) (6)
(7)
(8)
APPLICATIONS
Terminal for SDRAM and
(1) SIZE
YC:102/104/122/124/162/164/248/324/158T/358L/358T
TC: 122/124/164
DDRAM
Computer applications: laptop
computer, desktop computer
(2) ARRAYS OR NETWORKS
Consume electronic equipments:
PDAs, PNDs
Mobile phone, telecom…
Array YC102/104/122/124/162/164/248/324: -
Network YC158T/YC358L/YC358T: NA
(3)
TOLERANCE
F = ±1%
J = ±5% (for Jumper ordering, use code of J)
FEATURES
AEC-Q200 qualified
( )
4 PACKAGING TYPE
More efficient in pick & place
application
R = Paper taping reel
K = Embossed plastic tape reel
Low assembly costs
RoHS compliant
( )
5 TEMPERATURE COEFFICIENT OF RESISTANCE
– = Base on spec
Products with lead free
terminations meet RoHS
requirements
( )
6 TAPING REEL
07 = 7 inch dia. Reel
13 = 13 inch dia. Reel
Pb-glass contained in electrodes
Resistor element and glass are
exempted by RoHS
( )
7 RESISTANCE VALUE
There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point.
Reducing environmentally
hazardous wastes
Detailed resistance rules show in table of “Resistance rule of global part number”.
High component and equipment
reliability
(8) DEFAULT CODE
Letter L is the system default code for ordering only. (Note)
Letter T is the only default code for YC102.
Saving of PCB space
None forbidden-materials used in
products/production
Halogen Free Epoxy
Resistance rule of global part
number
ORDERING EXAMPLE
Resistance code rule
Example
The ordering code of a YC122 convex chip resistor array, value 1,000 Ω
with ±5% tolerance, supplied in 7-inch tape reel is: YC122-JR-071KL.
0R
0R = Jumper
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
XRXX
(1 to 9.76 Ω)
YC158T network, value 100,000Ω with 5% tolerance, supplied in 7-inch
tape reel is: YC158TJR-07100KL
XXRX
10R = 10 Ω
(10 to 97.6 Ω)
97R6 = 97.6 Ω
NOTE
XXXR
(100 to 976 Ω)
100R = 100 Ω
1. All our RSMD products meet RoHS compliant. "LFP" of the internal 2D reel label
mentions "Lead Free Process"
XKXX
(1 to 9.76 KΩ)
1K = 1,000 Ω
9K76 = 9760 Ω
2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of
GLOBAL PART NUMBER / 12NC can be added (both are on customer request)
XM
1M = 1,000,000 Ω
(1 MΩ)
www.yageo.com
Feb. 21, 2019 V.9
Product specification
3
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
PHYCOMP BRAND ordering codes
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp
brand products.
(
)
GLOBAL PART NUMBER PREFERRED
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
TC122 series is supplied and ordered by global part number only.
12NC CODE
2350
(1)
XXX XXXXX L
Last digit of 12NC
Resistance decade (3)
Last digit
( )
(2)
(3)
4
PAPER / PE TAPE ON REEL (units) (2)
0.01 to 0.0976
0
7
8
9
1
2
3
4
5
6
Ω
TYPE/ START TOL. RESISTANCE
2×0402 IN (1)
(%) RANGE
0.1 to 0.976
Ω
10,000
50,000
013 12xxx
013 3xxxx
-
1 to 9.76
Ω
ARV321
2350
2350
2350
±5% 1 to 1 MΩ
±1% 10 to 1 MΩ
013 11xxx
013 2xxxx
013 91001
10 to 97.6
100 to 976
Ω
ARV322
Jumper
Ω
-
0 Ω
1 to 9.76 K
Ω
(1) The resistors have a 12-digit ordering code starting with 2350.
10 to 97.6 K
Ω
(2) The subsequent 4 or 5 digits indicate the resistor tolerance and
packaging.
100 to 976 K
Ω
1 to 9.76 M
Ω
(3) The remaining 4 or 3 digits represent the resistance value with the
last digit indicating the multiplier as shown in the table of
“Last digit of 12NC”.
10 to 97.6 M
Ω
Example:
0.02
0.3
=
=
=
=
=
0200 or 200
3007 or 307
1008 or 108
3303 or 333
1006 or 106
Ω
Ω
(4) "L" is optional symbol (Note)
.
Ω
ORDERING EXAMPLE
1
Ω
33 K
10 M
The ordering code of a ARV321 resistor, value 1,000Ω with ±5%
tolerance, supplied in tape of 10,000 units per reel is: 235001311102(L)
or YC122-JR-071KL.
Ω
NOTE
1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART
NUMBER / 12NC can be added (both are on customer request)
www.yageo.com
Feb. 21, 2019 V.9
Product specification
4
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
MARKING
YC102
No marking
No marking
Fig. 1
YC122
Fig. 2
YC104
No marking
Fig. 3
YC124 / 162 / 164 / 324
0
1-Digit marking
Fig. 4 Jumper=0Ω
E-24 series: 3 digits, 5%
First two digits for significant figure and 3rd digit for number of zeros
2
Fig. 4-1 Value=240KΩ
YC248
1-Digit marking
0
Fig. 5 Jumper=0Ω
E-24 series: 3 digits, 5%
2
First two digits for significant figure and 3rd digit for number of zeros
Fig. 5-1 Value=240KΩ
YC158T/358L/358T
E-24 series: 3 digits
2
First two digits for significant figure and 3rd
digit for number of zeros
Fig. 6 Value=24Ω
Fig. 6-1 Value=240KΩ
TC122
No marking
Fig. 7
TC124
No marking
Fig. 8
www.yageo.com
Feb. 21, 2019 V.9
Product specification
5
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
TC164
0
1-Digit marking
Fig. 9 Jumper=0Ω
E-24 series: 3 digits, 5%
First two digits for significant figure and 3rd digit for number of zeros
2
Fig. 9-1 Value=240KΩ
For further marking information, please refer to data sheet “Chip resistors marking”.
CONSTRUCTION
The resistor is constructed on top
OUTLINES
of a high-grade ceramic body.
Internal metal electrodes are added
on each end to make the contacts to
the thick film resistive element. The
composition of the resistive element
is a noble metal imbedded into a
glass and covered by a second glass
to prevent environment influences.
The resistor is laser trimmed to the
rated resistance value. The resistor
Fig. 10 Chip resistor outlines
is covered with a protective epoxy
coat, finally the two external
terminations (matte tin on Ni-
barrier) are added as shown in Fig.9.
www.yageo.com
Feb. 21, 2019 V.9
Product specification
6
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
SCHEMATIC
Fig. 11 Equivalent circuit diagram
Note: 1. YC102/104 is flat type
For dimension, please refer to Table 1
Side viewfor all types
YC102_ T
YC 122/162
YC 104/124/164/324
158/358/248
TC 122
TC 124/164
unit: mm
Fig. 12 YC/TC122 series chip resistors dimension
Note: (1) YC102/104 is flat type
www.yageo.com
Feb. 21, 2019 V.9
Product specification
7
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
DIMENSIONS
Table 1
TYPE
H / H1 / HW
B
0.15 ±0.10
0.15 ±0.05
P
L
T
0.35 ±0.10
0.35 ±0.10
W1
W2
YC102
YC104
0.55 ±0.10
0.80 ±0.10
0.15 ±0.10
0.60 ±0.10
H : 0.25 ± 0.10
H : 0.20 ± 0.10
0.40 ±0.10
1.40 ±0.10
1.00 ±0.10
0.15 ±0.10
0.60 ±0.10
H : 0.21+0.10 / -0.05
HW : 0.35 ±0.10
H: 0.40 ± 0.15
YC122
YC124
YC162
0.20 ±0.10
0.20 ±0.15
0.30 ±0.10
0.67 ±0.05
0.50 ±0.05
0.80 ±0.05
0.30 ±0.10
0.45 ±0.10
0.40 ±0.10
0.25 ±0.10
0.30 ±0.15
0.30 ±0.10
1.00 ±0.10
1.00 ±0.10
1.60 ±0.10
2.00 ±0.10
1.60 ±0.10
H1: 0.30 ± 0.05
H : 0.30 ±0.10
HW : 0.65 ±0.15
H : 0.65 ±0.05
H1: 0.50 ±0.15
H : 0.45 ±0.05
H1: 0.30 ±0.05
H : 1.10 ±0.15
H1: 0.90 ±0.15
H : 0.30 ±0.05
H : 0.30 ±0.10
H : 0.50 ±0.15
YC164
YC248
YC324
0.30 ±0.15
0.30 ±0.15
0.50 ±0.20
0.80 ±0.05
0.50 ±0.05
1.27 ±0.05
3.20 ±0.15
4.00 ±0.20
5.08 ±0.20
0.60 ±0.10
0.45 ±0.10
0.60 ±0.10
0.30 ±0.15
0.40 ±0.15
0.50 ±0.15
1.60 ±0.15
1.60 ±0.15
3.20 ±0.20
TC122
TC124
TC164
0.25 ±0.15
0.20 ±0.10
0.30 ±0.15
0.50 ±0.05
0.50 ±0.05
0.80 ±0.05
1.00 ±0.10
2.00 ±0.10
3.20 ±0.15
0.30 ±0.10
0.40 ±0.10
0.60 ±0.10
0.25 ±0.15
0.25 ±0.10
0.30 ±0.15
1.00 ±0.10
1.00 ±0.10
1.60 ±0.15
H : 0.45±0.05
H1: 0.32± 0.05
H : 1.10±0.15
YC158T
0.30 ±0.15
0.50 ±0.15
0.64 ±0.05
1.27 ±0.05
3.20 ±0.20
6.40 ±0.20
0.60 ±0.10
0.60 ±0.10
0.35 ±0.15
0.50 ±0.15
1.60 ±0.15
3.20 ±0.20
YC358L
YC358T
H1: 0.90±0.15
www.yageo.com
Feb. 21, 2019 V.9
Product specification
8
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
ELECTRICAL CHARACTERISTICS
Table 2
POWER
P70
Jumper criteria
(unit: A)
TYPE
OPERATING
TEMP. RANGE
MWV RCOV DWV
RESISTANCE RANGE &
TOLERANCE
T. C. R.
E24 ±5% 10Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 10Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Rated current 0.5
Max. current 1.0
YC102
YC104
YC122
YC124
YC162
YC164
1/32W
1/32W
1/16W
1/16W
1/16W
1/16W
-55°C to +125°C
-55°C to +125°C
-55°C to +155°C
-55°C to +155°C
-55°C to +155°C
-55°C to +155°C
15V
12.5V
50V
30V
25V
30V
25V
±200 ppm/°C
E24 ±5% 10Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 10Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Rated current 0.5
Max. current 1.0
E24 ±5% 1Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 1Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Rated current 0.5
Max. current 1.0
100V
50V
100V
100V
100V
100V
1Ω ≤ R ≤ 10Ω
E24 ±5% 1Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 1Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
±250 ppm/°C Rated current 1.0
10Ω ≤ R ≤ 1MΩ Max. current 2.0
±200 ppm/°C
25V
E24 ±5% 1Ω ≤ R ≤ 1MΩ
E/24/E96 ±1% 1Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Rated current 1.0
Max. current 2.0
50V
100V
100V
E24 ±5% 1Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 1Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Rated current 1.0
Max. current 2.0
50V
E24 ±5% 10Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 10Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Rated current 2.0
Max. current 10.0
YC248
YC324
TC122
1/16W
1/8W
-55°C to +155°C
-55°C to +155°C
-55°C to +125°C
50V
200V
50V
100V
500V
100V
100V
500V
100V
E24 ±5% 10Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 10Ω ≤ R ≤ 1MΩ
--- ---
E24 ±5% 10Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 10Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Rated current 1.0
Max. current 1.5
1/16W
±200 ppm/°C
E24 ±5% 10Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 10Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Rated current 1.0
Max. current 1.5
TC124
1/16W
1/16W
-55°C to +125°C
-55°C to +155°C
50V
50V
100V
100V
100V
100V
E24 ±5% 10Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 10Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Rated current 1.0
Max. current 2.0
TC164
10Ω ≤ R ≤
E24 ±5%
YC158T
1/16W
1/16W
-55°C to +155°C
-55°C to +155°C
25V
50V
50V
50V
--- ---
--- ---
100KΩ
YC358L
YC358T
10Ω ≤ R ≤
E24 ±5%
100V
100V
330KΩ
FOOTPRINT AND SOLDERING PROFILES
For recommended footprint and soldering profiles, please refer to data sheet “Chip resistors mounting”.
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
YC102/ YC/TC
YC/TC YC162
124
YC/TC YC248 YC324 YC158T YC358L
PACKING STYLE
PACKING STYLE
104
10,000
50,000
122
10,000
50,000
164
YC358T
7" (178mm)
10,000
40,000
5,000
---
5,000
5,000
---
---
---
5,000
---
---
Paper taping reel ( R )
13" (254mm)
20,000
20,000
7" (178mm)
---
---
---
---
---
4,000
4,000
---
4,000
Embossed taping reel ( K)
NOTE
1. For tape and reel specification/dimensions, please refer to data sheet “Chip resistors packing”.
www.yageo.com
Feb. 21, 2019 V.9
Product specification
9
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
FUNCTIONAL DESCRIPTION
OPERATING TEMPERATURE RANGE
YC102/104/122/162, TC122/124 Range:
-55℃ to +125℃ (Fig.13)
YC124/164/248/324/158T/358L/358T, TC164 Range:
-55℃ to +155℃(Fig.14)
POWER RATING
Each type rated power at 70℃
YC102/104 = 1/32 W
YC122/124/162/164/248/158T/358L/358T = 1/16 W
YC324 = 1/8 W
TC122/124/164 = 1/16 W
Fig. 13 Maximum dissipation (P) in percentage of rated power as a
function of the operating ambient temperature (T
)
amb
RATED VOLTAGE
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V= (PxR)
or max. working voltage whichever is less
Where
V=Continuous rated DC or
AC (rms) working voltage (V)
P=Rated power (W)
Fig. 14 Maximum dissipation (P) in percentage of rated power as a
function of the operating ambient temperature (T
R=Resistance value (Ω )
)
amb
www.yageo.com
Feb. 21, 2019 V.9
Product specification
10
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
MIL-STD-202-method 108
IEC 60115-1 4.25.1
JIS C 5202-7.10
PROCEDURE
REQUIREMENTS
Life/
Operational Life/
Endurance
1,000 hours at 70±5 °C applied RCWV
1.5 hours on, 0.5 hour off, still air required
±(2%+0.05 Ω)
<100 mΩ for Jumper
High Temperature
Exposure/
Endurance at
Upper Category
Temperature
MIL-STD-202-method 108
IEC 60115-1 4.25.3
JIS C 5202-7.11
1,000 hours at maximum operating
temperature depending on specification,
unpowered
± (1%+0.05 Ω)
<50 mΩ for Jumper
No direct impingement of forced air to the
parts
Tolerances: 125±3 °C
Moisture
Resistance
MIL-STD-202-method 106
IEC 60115-1 4.24.2
Each temperature / humidity cycle is defined at ± (2%+0.05 Ω)
8 hours (method 106F), 3 cycles / 24 hours for
<100 mΩ for Jumper
10d with 25 °C / 65 °C 95% R.H, without
steps 7a & 7b, unpowered
Parts mounted on test-boards, without
condensation on parts
Measurement at 24±2 hours after
test conclusion
Thermal Shock
MIL-STD-202-method 107
-55/+125 °C
± (1%+0.05 Ω)
Note: Number of cycles required is 300.
Devices mounted
<50 mΩ for Jumper
Maximum transfer time is 20 seconds. Dwell
time is 15 minutes. Air – Air
Short Time
Overload
MIL-R-55342-para 4.7.5
IEC60115-1 4.13
2.5 times RCWV or maximum overload
voltage whichever is less for 5 sec at room
temperature
± (2%+0.05 Ω)
<50 mΩ for Jumper
No visible damage
Board Flex/
Bending
IEC60115-1 4.33
Device mounted on PCB test board as
described, only 1 board bending required
± (1%+0.05 Ω)
<50 mΩ for Jumper
No visible damage
3 mm bending
Bending time: 60±5 seconds
Ohmic value checked during bending
www.yageo.com
Feb. 21, 2019 V.9
Product specification
11
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
TEST
TEST METHOD
J-STD-002 test
PROCEDURE
REQUIREMENTS
Solderability
- Wetting
Electrical Test not required
Magnification 50X
Well tinned (≥95% covered)
No visible damage
SMD conditions:
1st step: method B, aging 4 hours at 155 °C
dry heat
2nd step: leadfree solder bath at 245±3 °C
Dipping time: 3±0.5 seconds
- Leaching
J-STD-002 test
Leadfree solder, 260 °C, 30 seconds
immersion time
No visible damage
- Resistance to
Soldering Heat
MIL-STD-202-method 210
Condition B, no pre-heat of samples
±(1%+0.05 Ω)
Leadfree solder, 260 °C, 10 seconds
immersion time
<50 mΩ for Jumper
No visible damage
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
Biased Humidity
AEC-Q200 Test 7
1,000 hours; 85 °C / 85% RH
10% of operating power
± (5.0%+0.05 Ω)
MIL-STD-202-Method 103
Measurement at 24± 4 hours after test
conclusion.
www.yageo.com
Feb. 21, 2019 V.9
Product specification
12
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
REVISION HISTORY
REVISION DATE
CHANGE
DESCRIPTION
NOTIFICATION
Feb.19, 2019
Version 9
Version 8
Version 7
Version 6
-
-
-
-
- Update H dimension for YC124
- Update AEC-Q200 qualified
Dec. 24. 2018
Aug. 22, 2017
Jun. 1, 2017
- Correct the typo for YC158T/358L/358T, Marking, "240" is 24ohm
- Update ordering information for networks YC158T/YC358L/YC358T
- Update YC158 and 358 part number to YC158T , YC358L and YC358T
- Delete YC102 default code L type
Version 5
Version 4
Version 3
Version 2
Version 1
Version 0
Feb. 14, 2017
Dec. 22, 2016
Apr. 29, 2016
Dec. 11, 2015
Feb. 04, 2015
Nov. 14, 2014
-
-
-
-
-
-
- Update YC series and TC164 dimension
- Update Operating Temperature
- Update YC102 to flat type
- First issue of this specification
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
Feb. 21, 2019 V.9
相关型号:
YC124-JR-0756K0L
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 50V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 0408, CHIP, LEAD FREE
YAGEO
YC124-JR-0756R
Array/Network Resistor, Isolated, 0.0625W, 56ohm, 25V, 5% +/-Tol, -200,200ppm/Cel, 0408
YAGEO
YC124-JR-0756RL
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 56ohm, 25V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 0408, CHIP
YAGEO
YC124-JR-07620K
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 620000ohm, 50V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 0408, CHIP
YAGEO
YC124-JR-07620R
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 620ohm, 50V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 0408, CHIP
YAGEO
©2020 ICPDF网 联系我们和版权申明