ZL60301_07 [ZARLINK]
Parallel Fiber Optic Transceiver (4 + 4) x 2.72 Gbps; 并行光纤收发器( 4 + 4 )× 2.72 Gbps的型号: | ZL60301_07 |
厂家: | ZARLINK SEMICONDUCTOR INC |
描述: | Parallel Fiber Optic Transceiver (4 + 4) x 2.72 Gbps |
文件: | 总6页 (文件大小:273K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ZL60301
Parallel Fiber Optic Transceiver
(4 + 4) x 2.72 Gbps
Shortform Data Sheet
March 2007
A full Data Sheet is available to qualified customers. To
register, please send an email to opto@zarlink.com.
Ordering Information
ZL60301MLDC
Transceiver
ZL60301MMDC Transceiver with EMI-clip
0°C to +80°C
.
•
Link reach 300-m with 50/125 µm 500 MHz km
fiber at 2.5 Gbps
Channel BER better than 10-12
Features
•
•
•
•
•
•
•
Compatible with POP4 MSA usage
4 Transmit channels and 4 Receive channels
Data rate up to 2.72 Gbps per channel
850 nm VCSEL array
Industry standard MPO/MTP ribbon fiber
connector interface
•
•
•
•
Pluggable MegArray® connector
Laser class 1 M IEC 60825-1:2001 compliant
Low power consumption, < 1 W
Power supply 3.3 V
Data I/O is CML compatible
VCCA Rx VCCB Rx VEE Rx
Rx_EN Rx_SD SQ_EN
RX0
Trans-
Impedance
and
DOUT0+
DOUT0-
RX1
PIN Array
RX2
Limiting
Amplifier
DOUT3+
DOUT3-
RX3
DIN3+
DIN3-
TX3
TX2
VCSEL
Driver
VCSEL
Array
TX1
DIN0+
DIN0-
TX0
VCSEL Driver Controller
VCC Tx
Tx_EN
Tx_DIS
RESET
FAULT
VEE TX
Figure 1 - Transceiver Block Diagram
1
Zarlink Semiconductor Inc.
Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc.
Copyright 2007, Zarlink Semiconductor Inc. All Rights Reserved.
ZL60301
Shortform Data Sheet
Applications
•
•
•
•
•
•
High-speed interconnects within and between switches, routers and transport equipment
Server-Server Clusters, Super-computing interconnections
InfiniBand 4x-SX compliant
Fibre Channel connections
Proprietary backplanes
Interconnects rack-to-rack, shelf-to-shelf, board-to-board, board-to-optical backplane
Description
The ZL60301 is high-speed transceiver for parallel fiber applications. This transceiver performs E/O and O/E
conversions for data transmission over multimode fiber ribbon.
The ZL60301 provides advantages in terms of power consumption, edge and board density over competing
solutions.
The transmit section converts parallel electrical input signals via a laser driver and a VCSEL array into parallel
optical output signals at a wavelength of 850 nm.
The receive section converts parallel optical input signals via a PIN photodiode array and a transimpedance and
limiting amplifier, into electrical output signals.
The module is fitted with two pluggable industry-standard connectors. For the electrical interface, a 100 position
FCI MegArray® receptacle is used. For the optical interface, an industry-standard MTPTM(MPO) connector is used,
which is compliant with IEC 61754-7. This provides ease of assembly on the host board and enables provisioning of
bandwidth on demand.
Reliability assurance is based on Telcordia GR-468-CORE and the parts are compliant to the EU directive
2002/95/EC issued 27 January 2003 [RoHS].
Exemption 6 & 7
2
Zarlink Semiconductor Inc.
ZL60301
Shortform Data Sheet
Classified in accordance with IEC 60825-1/A2:2001, IEC 60825-2: 2000
Class 1 M Laser Product
Emitted wavelength: 840 nm
Module front view - MTP key up
Tx0
Tx1
Tx2
Tx3
−
−
−
−
Rx3
Rx2
Rx1
Rx0
Host printed circuit board
Table 1 - Transceiver Optical Channel Assignment
3
Zarlink Semiconductor Inc.
NOTES:-
A1
A10
n0,58
`0,05
n0,05
A B-C
j
1. All dimensions in mm.
A
C
2. Tolerancing per ASME Y14.5M-1994.
18,16
7,48
2-56 UNC-2B
n2,5
n0,15m
n0,15m
A B-C
A B-C
j
n3,63
n1,3
n0,15m
n0,15m
A
j
j
j
2-56 UNC-2B
B
3,50 Deep MIN
A B-C
36,87
27,64
FRONT VIEW ( 2 : 1 )
14,4
30,23
31,75
Projection Method
© Zarlink Semiconductor 2002. All rights reserved.
ISSUE
Package code
Drawing type
MJ
3
JS004296 rev.3
1
2
Previous package codes
JS004296R1A JS004296 rev.2
ACN
Package Drawing - Module Layout
12-JUN-03
DATE
APPRD.
24-JAN-04 24-JAN-05
Title
TD/BE MD/MA MD/MA
JS004296
17,5
14,4
(n2,69 `0,12 Hole)
n0,1 A B-C
j
Max product outline
Component keep-out area.
n1,70 `0,12 Holes
n0,1
A B-C
j
n3,00 MIN pads, Keep Out
n0,1 A B-C
j
K1
A1
n0,58 `0,05 Pads
n0,05
A B-C
j
A10
K10
n2,69 `0,12 Hole
n0,1 A
j
n4,30 MIN pads (3x), Keep Out
n0,1
A B-C
j
C
B
A
1,145
13,72
NOTES:-
1. All dimensions in mm.
2. Tolerancing per ASME Y14.5M-1994.
Projection Method
© Zarlink Semiconductor 2002. All rights reserved.
Package code
Drawing type
MJ
2
ISSUE
ACN
3
1
Previous package codes
Package Drawing,
JS004296R1A JS004296 rev.2
JS004296 rev.3
14-FEB-05
MD/MA
Host Circuit Board Footprint Layout
24-JAN-05
DATE
APPRD.
12-JUN-03
Title
TD/BE
MD/MA
JS004296
For more information about all Zarlink products
visit our Web Site at
www.zarlink.com
Information relating to products and services furnished herein by Zarlink Semiconductor Inc. or its subsidiaries (collectively “Zarlink”) is believed to be reliable.
However, Zarlink assumes no liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such
information, product or service or for any infringement of patents or other intellectual property rights owned by third parties which may result from such application or
use. Neither the supply of such information or purchase of product or service conveys any license, either express or implied, under patents or other intellectual
property rights owned by Zarlink or licensed from third parties by Zarlink, whatsoever. Purchasers of products are also hereby notified that the use of product in
certain ways or in combination with Zarlink, or non-Zarlink furnished goods or services may infringe patents or other intellectual property rights owned by Zarlink.
This publication is issued to provide information only and (unless agreed by Zarlink in writing) may not be used, applied or reproduced for any purpose nor form part
of any order or contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other
information appearing in this publication are subject to change by Zarlink without notice. No warranty or guarantee express or implied is made regarding the
capability, performance or suitability of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute
any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user’s responsibility to fully determine the performance and
suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. Manufacturing does
not necessarily include testing of all functions or parameters. These products are not suitable for use in any medical products whose failure to perform may result in
significant injury or death to the user. All products and materials are sold and services provided subject to Zarlink’s conditions of sale which are available on request.
Purchase of Zarlink’s I2C components conveys a licence under the Philips I2C Patent rights to use these components in and I2C System, provided that the system
conforms to the I2C Standard Specification as defined by Philips.
Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc.
Copyright Zarlink Semiconductor Inc. All Rights Reserved.
TECHNICAL DOCUMENTATION - NOT FOR RESALE
相关型号:
ZL60304MLDC
FIBER OPTIC TRANSCEIVER PARALLEL INTERFACE, 3125Mbps(Tx), 3125Mbps(Rx), BOARD MOUNT, RIBBON FIBER CONNECTOR, ROHS COMPLIANT PACKAGE
MICROSEMI
ZL60304MMDC
FIBER OPTIC TRANSCEIVER PARALLEL INTERFACE, 3125Mbps(Tx), 3125Mbps(Rx), BOARD MOUNT, RIBBON FIBER CONNECTOR, ROHS COMPLIANT PACKAGE
MICROSEMI
©2020 ICPDF网 联系我们和版权申明