V585ME60-LF [ZCOMM]
VOLTAGE CONTROLLED OSCILLATOR; 压控振荡器
| 型号： | V585ME60-LF |
| 厂家： | 
Z-COMMUNICATIONS, INC |
| 描述： | VOLTAGE CONTROLLED OSCILLATOR |
| 文件： | 总2页 (文件大小：46K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
V585ME60-LF
9939 Via Pasar • San Diego, CA 92126
TEL (858) 621-2700 FAX (858) 621-2722
VOLTAGE CONTROLLED OSCILLATOR
Rev A1
PHASE NOISE (1 Hz BW, typical)
FEATURES
• Frequency Range:
• Tuning Voltage:
• MINI-14S- - Style Package
950 -
MHz
2150
0.5-22 Vdc
APPLICATIONS
• Earthstations
• Satellite Communications
•
OFFSET (Hz)
VALUE
UNITS
PERFORMANCE SPECIFICATIONS
Oscillation Frequency Range
Phase Noise @ 10 kHz offset (1 Hz BW, typ.)
Harmonic Suppression (2nd, typ.)
Tuning Voltage
-
950 2150
MHz
dBc/Hz
dBc
-98
-7
0.5-22
65
Vdc
Tuning Sensitivity (avg.)
MHz/V
Power Output
7±2
dBm
Load Impedance
50
Input Capacitance (max.)
100
<2
p
Pushing
Mz/V
MHz
°C
Pulling ( 14dB Return Loss, Any Phase)
<9
Operating Temperature Range
Package Style
-40 to 85
MINI-14S-LOW
POWER SUPPLY REQUIREMENTS
Supply Voltage (Vcc, nom.)
Supply Current (Icc, typ.)
12
17
Vdc
mA
All specifications are typical unless otherwise noted and subject to change without notice.
APPLICATION NOTES
• AN-100/1 : Mounting and Grounding of VCOs
• AN-102 : Proper Output Loading of VCOs
• AN-107 : How to Solder Z-COMM VCOs
NOTES:
© Z-Communications, Inc.
Page 1
All rights reserved
LOW COST - HIGH PERFORMANCE
V585ME60-LF
VOLTAGE CONTROLLED OSCILLATOR
PAGE 2
TUNING CURVE, typ.
2300
2220
2140
2060
1980
1900
1820
1740
1660
1580
1500
1420
1340
1260
1180
1100
1020
940
85 °c
°c
25
-40 °c
860
780
0
2
4
6
8
10
12
14
16
18
20
22
TUNING VOLTAGE (Vdc)
POWER CURVE, typ.
10
9
8
7
85 °c
6
°c
25
5
-40 °c
4
3
813 1019 1159 1280 1395 1512 1635 1767 1903 2031 2143 2240
FREQUENCY (MHz)
PHYSICAL DIMENSIONS
TYPICAL OF ALL PADS
SEE NOTE 3
MINI-14S-LOW
415-0067 REV. D
(DRAWING NOT TO SCALE)
.065
NOTES:
.030
1. THE INSIDE RADIUS OF ALL 14 HALF HOLES
.031
AT THE PERIMETER OF THE BOARD ARE
PLATED TO PROVIDE A SURFACE FOR THE
ATTACHMENT OF THE VCO TO A PCB
.026
.052
.114
IN 11 LOCATIONS, WITH 3 PADS BEING
USED FOR ELECTROMECHANICAL INTERFACE.
14 SOLDER LOCATIONS REQUIRED.
TABS RANGE:
SEE NOTE 5.
(4 PLACES)
2. THE SURFACE OF THE SHIELD IS TIN PLATED
AND MAY BE SOLDERED TO. THE SHIELD'S
BASE METAL IS COLD ROLLED STEEL.
3. THE GROUND PLANE IS GROUND AND ATTACHES
TO A GROUND TRACK ON THE UPPER SIDE OF
THE BOARD AS WELL AS THE SHIELD BY PTH.
4. UNLESS OTHERWISE NOTED ALL DIMENSIONS
ARE IN INCHES.
5. UNLESS OTHERWISE NOTED ALL TOLERANCES
ARE AS FOLLOWS:
DETAIL A
0.500
0.475
P2
0.415
0.315
0.415
0.315
0.215
0.090
P1=VT
P2=RF OUT
P3=Vcc
P3
0.215
0.090
TOLERANCES
.XXX= ± .010
BOTTOM VIEW
P1
.160
SEE DETAIL 'A'
.070 TYP
.034
0.000
0.025
0.000
.150
TYP
GROUND PLANE SOLDER PLATED
Page 2
© Z-Communications, Inc.
Printed in the U.S.A.
相关型号：
©2020 ICPDF网 联系我们和版权申明