AZ2250-1AT-120AF [ZETTLER]
30 AMP MINIATURE POWER RELAY;
| 型号： | AZ2250-1AT-120AF |
| 厂家： | 
ZETTLER ELECTRONICS |
| 描述： | 30 AMP MINIATURE POWER RELAY |
| 文件： | 总3页 (文件大小：51K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AZ2250
30 AMP MINIATURE
POWER RELAY
FEATURES
• 1 Form A, B and C contacts available
• AC and DC coils available
• High dielectric strength version available
• Epoxy sealed versions available
• UL Class F (155°C) standard
• UL, CUR file E44211
• VDE certificate 40027037
CONTACTS
GENERAL DATA
Arrangement SPST (1 Form A)
SPST (1 Form B)
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 30 A 250 VAC
SPDT (1 Form C)
Ratings
1 Form A
Resistive load:
Operate Time
Release Time
15 ms max. at nominal coil voltage
10 ms max. at nominal coil voltage
(with no coil suppression)
Max. switched power: 840 W or 8310 VA
Max. switched current: 30 A
Max. switched voltage: 28 VDC or 277 VAC
Dielectric Strength
2500 Vrms coil to contact
(at sea level for 1 min.)
4000 Vrms coil to contact (version “T”)
1500 Vrms between open contacts
1 Form B
1 Form C
Max. switched power: 280 W or 4155VA
Max. switched current: 15 A
Max. switched voltage: 28 VDC or 277 VAC
Insulation Resistance
Dropout
1000 megaohms min. at 20°C,
500 VDC 50% RH
Max. switched power: 560 W or 8310 VA (N.O.)
280 W or 5540 VA (N.C.)
Max. switched current: 30 A (N.O.)
20 A (N.C.)
DC: > 10% of nominal coil voltage
AC: > 20% of nominal coil voltage
Ambient Temperature
Operating
Max. switched voltage: 28 VDC or 277 VAC
-40°C (-40°F) to 85°C (185°F), DC coils
-40°C (-40°F) to 70°C (158°F), AC coils
Material
Silver cadmium oxide [1], silver tin oxide [2]
Vibration
1.5 mm DA at 10-55 Hz
10 g
Resistance
< 50 milliohm initially
(24 V, 1A voltage drop method)
Shock
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
COIL
Power
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
At Pickup Voltage
(typical)
500 mW, DC coil
1.4 VA, AC coil
5 seconds
80°C (176°F)
Max. Continuous
Dissipation
1.7 W at 20°C (68°F) ambient, DC coil
2.7 VA at 20°C (68°F) ambient, AC coil
30 seconds
36 grams
Temperature Rise
Max. Temperature
43°C (77°F) at nominal coil voltage
155°C (311°F)
Packing unit in pcs
40 per plastic tray / 280 per carton
NOTES
1. All values at 20°C (68°F)
2. Relay may pull in with less than “Must Operate” value.
3. AC coils are not VDE approved
4. 18 VDC coil is not VDE approved.
5. Specification subject to change without notice.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
fax:
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-08
AZ2250
CONTACTS
Rated load
Rated load
VDE
UL
1 Form A
1 Form A, DC coils only
30 A at 250 VAC, resistive, 30k cycles [1]
15 A at 250 VAC, cos phi = 0.4, 100k cycles [1][2]
30 A at 277 VAC, General Use, 80°C, 6k cycles [1][2]
30 A at 28 VDC, resistive, 80°C, 6k cycles [1]
28 A at 277 VAC, General Use, 80°C, 100k cycles [1]
20 FLA / 60 LRA at 277 VAC, 80°C, 30k cycles [1]
2 HP at 250 VAC [1][2]
1 Form B, DC coils only
15 A at 250 VAC, resistive, 30k cycles [1]
1 HP at 125 VAC [1][2]
1 Form C, (N.O.), DC coils only
30 A at 250 VAC, resistive, 30k cycles [1]
20 A at 250 VAC, resistive, 100k cycles [2]
1 Form B
15 A at 277 VAC, General Use, 80°C, 6k cycles [1]
10 A at 28 VDC, resistive, 80°C, 6k cycles [1]
10 FLA / 33 LRA at 277 VAC, 80°C, 30k cycles [1]
0.5 HP at 250VAC [1]
1 Form C, (N.C.), DC coils only
15 A at 250 VAC, resistive, 30k cycles [1]
10 A at 250 VAC, resistive, 100k cycles [2]
0.25 HP at 125 VAC [1]
1 Form C, (N.O.)
Note: 18 VDC coil is not VDE approved.
AC coils are not VDE approved.
30 A at 277 VAC, General Use, 80°C, 6k cycles [1][2]
20 A at 277 VAC, General Use, 80°C, 6k cycles [1]
20 A at 28 VDC, resistive, 80°C, 6k cycles [1]
20 FLA / 60 LRA at 277 VAC, 80°C, 30k cycles [1]
2 HP at 250 VAC [1][2]
1 HP at 125 VAC [1][2]
1 Form C, (N.C.)
20 A at 277 VAC, General Use, 80°C, 6k cycles [1][2]
10 A at 28 VDC, resistive, 80°C, 6k cycles [1]
10 FLA / 33 LRA at 277 VAC, 80°C, 30k cycles [1]
0.5 HP at 250 VAC [1][2]
0.25 HP at 125 VAC [1][2]
RELAY ORDERING DATA
COIL SPECIFICATIONS – DC Coil
ORDER NUMBER*
Nominal Coil
VDC
Must Operate
VDC
Max. Continuous
VDC
Coil Resistance
Ohm ± 10%
1 Form A
1 Form C
5
6
3.75
4.5
6.5
7.8
27
40
AZ2250-1AT-5DF
AZ2250-1AT-6DF
AZ2250-1AT-9DF
AZ2250-1AT-12DF
AZ2250-1AT-15DF
AZ2250-1AT-18DF
AZ2250-1AT-24DF
AZ2250-1AT-48DF
AZ2250-1AT-110DF
AZ2250-1CT-5DF
AZ2250-1CT-6DF
AZ2250-1CT-9DF
AZ2250-1CT-12DF
AZ2250-1CT-15DF
AZ2250-1CT-18DF
AZ2250-1CT-24DF
AZ2250-1CT-48DF
AZ2250-1CT-110DF
9
6.75
9.0
11.7
15.6
19.5
23.4
31.2
62.4
143.0
97
12
15
18
24
48
110
155
11.25
13.5
18.0
36.0
82.5
256
380
660
2,560
13,450
COIL SPECIFICATIONS – AC Coil 50/60 Hz
ORDER NUMBER*
Nominal Coil
VDC
Must Operate
VDC
Max. Continuous
VDC
Nominal Coil
Power VA
1 Form A
1 Form C
12
24
9.6
19.2
13.8
27.6
2.3
2.1
2.3
2.2
2.6
2.2
AZ2250-1AT-12AF
AZ2250-1AT-24AF
AZ2250-1AT-120AF
AZ2250-1AT-220AF
AZ2250-1AT-240AF
AZ2250-1AT-277AF
AZ2250-1CT-12AF
AZ2250-1CT-24AF
AZ2250-1CT-120AF
AZ2250-1CT-220AF
AZ2250-1CT-240AF
AZ2250-1CT-277AF
120
220
240
277
96.0
138.0
286.0
286.0
318.5
176.0
192.0
220.0
* “1AT” or “1CT” denote silver cadmium oxide contacts.
Substitute “1BT” in place of “1AT” or “1CT” for 1 Form B relay.
Substitute “1AET” or “1CET” in place of “1AT” or “1CT” for silver tin oxide contacts.
Substitute “DEF” or “AEF” at the end of order number for epoxy sealed version.
Add “T” before “F” at the end of order number for 4000Vrms dielectric strength.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
fax:
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-08
AZ2250
MECHANICAL DATA
PC BOARD LAYOUT
.130
(3.3)
.400 .300
(10.16) (7.62)
3 x ø .079
[ø 2.0]
.504
(12.8)
.693
(17.6)
.900
(22.86)
1.268
(32.2)
2 x ø .044
[ø 1.0]
.150
(3.8)
.791
(20.1)
.094
(2.4)
.181
(4.6)
.550
(14.0)
1.063
(27.0)
.700
(17.8)
.197
(5.0)
Viewed toward terminals
WIRING DIAGRAMS
.098
(2.5)
Form A
Form B
Form C
.045 x .045
(1.14 x 1.14)
.032 x .062
(0.81 x 1.57)
.025 x .025
(0.63 x 0.63)
Viewed toward terminals
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
fax:
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-08
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明