AZ2501P2-1A-48D [ZETTLER]

50 AMP LATCHING POWER RELAY;


型号：	AZ2501P2-1A-48D
厂家：	ZETTLER ELECTRONICS
描述：	50 AMP LATCHING POWER RELAY
文件：	总3页 (文件大小：74K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

AZ2501P

50 AMP LATCHING

POWER RELAY

FEATURES

• 50 Amp switching

• Heavy loads to 13850 VA

• 4 kV dielectric strength

• 8 mm creepage distance

• Manual switch available

• Epoxy sealed version available

• UL, CUR file E44211

GENERAL DATA

CONTACTS

Arrangement

SPDT (1 Form C),

SPST (1 Form A)

Life Expectancy

Mechanical

Electrical

Minimum operations

1 x 10⁶

1 x 10⁵at 50 A 250 VAC Res. (SPST)

Ratings

Resistive load:

Set and Reset

Pulse Duration

Max. switched power: 13850 VA

Max. switched current: 50 A

Max. switched voltage: 440 VAC

50 ms minimum at nominal coil voltage

15 ms at nominal coil voltage

4000 Vrms coil to contact

Set Time (typical)

Reset Time (typical)

Dielectric Strength

Rated Load

UL, CUR

1 Form A (SPST)

50 A at 277 VAC, resistive, 70°C, 100k cycles

20 A at 347 VAC, resistive, 70°C, 30k cycles

5000 W at 240 VAC, tungsten, 40°C, 30k cycles

120 LRA / 20 FLA, at 120 VAC, 40°C, 30k cycles

102 LRA / 17 FLA, at 240 VAC, 40°C, 30k cycles

84 LRA / 14 FLA, at 277 VAC, 40°C, 30k cycles

(at sea level for 1 min.) 1500 Vrms between open contacts

Insulation

Resistance

1000 megohms min. at 20°C, 500 VDC,

50% RH

Creepage Distance

8 mm (1 Form A), 6 mm (1 Form C)

1 Form C (SPDT)

40 A at 277 VAC, general use, 70°C, 30k cycles

Ambient Temperature At nominal coil voltage

Operating -40°C (-40°F) to 70°C (158°F)

Vibration

1.5mm DA at 10–55 Hz

Material

Silver tin oxide

Shock

Resistance

< 50 milliohms initially

(at rated current, voltage drop method)

Operating

10 g, 11 ms, ¹/ sine (no false operation)

Non-Operating 100 g, 11 ms, ¹/ sine (no damage)

COIL

Enclosure

P.B.T. polyester

Tinned copper alloy

270°C (518°F)

5 seconds

Power

Terminals

At Pickup Voltage

(typical)

.96 W single coil

1.9 W dual coil

Max. Solder Temp.

Max. Solder Time

Weight

Temperature

Max. 105°C (221°F)

32 grams

NOTES

1. All values at 20°C (68°F).

2. Relay may pull in with less than “Must Operate” value.

3. Specifications subject to change without notice.

4. Initial state of contacts may be changed during transportation or shock!

ZETTLER electronics GmbH

Junkersstr. 3, D-82178 Puchheim, Germany

A ZETTLER GROUP Company

phone: +49 89 800 97-0 office@ZETTLERelectronics.com

fax: +49 89 800 97-200 www.ZETTLERelectronics.com

This product specification to be used only together with the application notes

which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf

2014-09-08

AZ2501P

RELAY ORDERING DATA

COIL SPECIFICATIONS - STANDARD SINGLE COIL

ORDER NUMBER*

Nominal Coil

VDC

Must Operate

VDC

Max. Continuous

VDC [1]

Coil Resistance

Ohm ± 10%

1 Form A

1 Form C

AZ2501P1-1A-6D

AZ2501P1-1A-9D

AZ2501P1-1A-12D

AZ2501P1-1A-24D

AZ2501P1-1A-48D

AZ2501P1-1C-6D

AZ2501P1-1C-9D

AZ2501P1-1C-12D

AZ2501P1-1C-24D

AZ2501P1-1C-48D

4.8

7.2

7.8

11.7

15.6

31.2

62.4

9.6

19.2

38.4

384

1536

COIL SPECIFICATIONS - STANDARD DUAL COIL

ORDER NUMBER*

Nominal Coil

VDC

Must Operate

VDC

Max. Continuous

VDC [1]

Coil Resistance

Ohm ± 10%

1 Form A

1 Form C

AZ2501P2-1A-6D

AZ2501P2-1A-9D

AZ2501P2-1A-12D

AZ2501P2-1A-24D

AZ2501P2-1A-48D

AZ2501P2-1C-6D

AZ2501P2-1C-9D

AZ2501P2-1C-12D

AZ2501P2-1C-24D

AZ2501P2-1C-48D

4.8

7.2

7.8

11.7

15.6

31.2

62.4

9.6

19.2

38.4

192

768

* For epoxy sealed version (not allowed with manual switch) add suffix “E”.

For manual switch add suffix “W”.

For PCB retaining stud add suffix “K”.

For reverse polarity coil add suffix “R”.

NOTE: [1] Max. continuous voltage should not be applied for more then 60 seconds.

MECHANICAL DATA

PC BOARD LAYOUT

Suffix “W” only

.376

[9.6]

1.083

[27.5]

.601MAX

[15.3]

1.547MAX

[39.3]

.472

[12.0]

0.177

[4.5]

.041

[1.04]

.266

[6.8]

.167

[4.3]

.118

[3.0]

1.201MAX

[30.5]

.078

[1.98]

.205

[5.2]

.143

[3.63]

Suffix “K” only

.083

[2.1]

Viewed toward terminals

.376

[9.6]

1.083

[27.5]

.472

.295

[7.5]

.132

[3.35]

[12.0]

.024

.094

[2.4]

[0.60]

.266

[6.8]

.167

[4.3]

.031

[0.8]

.394

[10.0]

Terminal 5 omitted (single coil)

.024

[0.60]

.059

[1.5]

.094

[2.4]

Suffix “K” only

Terminal 6 omitted (form A)

.063

[1.6]

Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"

ZETTLER electronics GmbH

Junkersstr. 3, D-82178 Puchheim, Germany

A ZETTLER GROUP Company

phone: +49 89 800 97-0 office@ZETTLERelectronics.com

fax: +49 89 800 97-200 www.ZETTLERelectronics.com

This product specification to be used only together with the application notes

which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf

2014-09-08

AZ2501P

WIRING DIAGRAMS

1 5

SPST&Single Coil

SPDT&Single Coil

SPST&Double Coil

SPDT&Double Coil

NOTE:

Standard Polarity type:

1. “Single Coil Latching Version”

(1) After energizing 1 (+) and 2 (-), 50ms pulse, terminal 3 and 4 is connected.

(2) After energizing 2 (+) and 1 (-), 50ms pulse, terminal 3 and 4 is disconnected.

2. “Double Coil Latching Version”

(1) After energizing 5 (+) and 1 (-), 50ms pulse, terminal 3 and 4 is connected.

(2) After energizing 5 (+) and 2 (-), 50ms pulse, terminal 3 and 4 is disconnected.

Reverse Polarity type:

1. “Single Coil Latching Version”

(1) After energizing 1 (-) and 2 (+), 50ms pulse, terminal 3 and 4 is connected.

(2) After energizing 1 (+) and 2 (-), 50ms pulse, terminal 3 and 4 is disconnected.

2. “Double Coil Latching Version”

(1) After energizing 5 (-) and 1 (+), 50ms pulse, terminal 3 and 4 is connected.

(2) After energizing 5 (-) and 2 (+), 50ms pulse, terminal 3 and 4 is disconnected.

ZETTLER electronics GmbH

Junkersstr. 3, D-82178 Puchheim, Germany

fax:

A ZETTLER GROUP Company

phone: +49 89 800 97-0 office@ZETTLERelectronics.com

+49 89 800 97-200 www.ZETTLERelectronics.com

This product specification to be used only together with the application notes

which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf

2014-09-08

相关型号：