AZ762P1-1AE-12D [ZETTLER]
20 AMP LATCHING POWER RELAY;
| 型号： | AZ762P1-1AE-12D |
| 厂家： | 
ZETTLER ELECTRONICS |
| 描述： | 20 AMP LATCHING POWER RELAY |
| 文件： | 总3页 (文件大小：70K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AZ762P
20 AMP LATCHING
POWER RELAY
FEATURES
• Dielectric strength 4000 Vrms
• Low height: 16 mm
• 20 Amp switching
• UL, CUR file E44211
CONTACTS
GENERAL DATA
Arrangement SPDT (1 Form C)
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 106
SPST (1 Form A)
1 x 105
Ratings
Resistive load:
Set Time (typical)
Reset Time (typical)
Min. Pulse Time
10 ms at nominal coil voltage
10 ms at nominal coil voltage
75 ms
Max. switched power: 5000 VA
Max. switched current: 20 A
Max. inrush current “1AT” version: 165 A , 20 ms
500 A, 2 ms
Max. Pulse Time
Dielectric Strength
1 min.
800 A, 200 µs
4000 Vrms coil to contact
Max. switched voltage: 125VDC* or 350 VAC
(at sea level for 1 min.) 1000 Vrms between open contacts
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Insulation
Resistance
1000 megaohms min. at 20°C
500 VDC 50% RH
Insulation
C250
Rated Load
(according to
DIN VDE 0110,
IEC 60664-1)
Overvoltage category: III
Pollution degree: 3
Nominal voltage: 250 VAC
UL, CUR 1 Form A
20 A at 250 VAC, resistive, 20k cycles, 70°C [1]
16 A at 250 VAC, resistive, 100k cycles, 85°C [1]
6 A at 277 VAC, tungsten, 6k cycles, 40°C [1]
6 A at 277 VAC, standard ballast, 6k cycles, 40°C [1]
1.5 HP at 250 VAC, 40°C [1]
Ambient Temperature
Operating
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
Vibration
0.062” (1.5 mm) DA at 10-55 Hz
10 g
3300 W at 277 VAC, electronic ballast, 20k cycles,
40°C [2]
Shock
3000 W at 220 VAC, tungsten, 6k cycles, 40°C [2]
1500 W at 347 VAC, standard ballast, 20k cycles,
40°C [2]
Enclosure
P.B.T. polyester
tinned copper alloy, P.C.
270°C (518°F)
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
1 Form C (normally open)
20 A at 250 VAC, resistive, 20k cycles, 70°C [1]
16 A at 250 VAC, resistive, 100k cycles, 85°C [1]
5 seconds
80°C (176°F)
30 seconds
1 Form C (normally closed)
16 A at 250 VAC, resistive, 50k cycles, 85°C [1]
13 grams
Material
Silver tin oxide [1], Silver tin oxide + tungsten [2]
< 20 milliohms initially
Packing unit in pcs.
50 per tray / 500 per carton box
Resistance
NOTES
COIL
Power
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Set/Reset” value.
3. Specifications subject to change without notice.
At Set/Reset Voltage 256 mW (single coil)
(typical)
384 mW (dual coil)
416 mW (dual coil 24 V)
4. Initial state of contacts may be changed during transportation or
shock!
Temperature
Max. 155°C (311°F) Class F
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
2013-07-18
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
AZ762P
RELAY ORDERING DATA
SINGLE COIL LATCHING
COIL SPECIFICATION
ORDER NUMBER*
Nominal Coil
VDC
Set/Reset
VDC
Max. Continuous
VDC
Coil Resistance
Ohm ± 10%
1 Form A
1 Form C
3
5
2.4
3.9
6.5
22.5
62.5
90
AZ762P1-1AE-3D
AZ762P1-1AE-5D
AZ762P1-1AE-6D
AZ762P1-1AE-9D
AZ762P1-1AE-12D
AZ762P1-1AE-24D
AZ762P1-1CE-3D
AZ762P1-1CE-5D
AZ762P1-1CE-6D
AZ762P1-1CE-9D
AZ762P1-1CE-12D
AZ762P1-1CE-24D
4.0
6
4.8
7.8
9
7.2
11.7
15.6
31.2
202
12
24
9.6
360
19.2
1,440
DUAL COIL LATCHING
COIL SPECIFICATION
ORDER NUMBER*
Nominal Coil
VDC
Set/Reset
VDC
Max. Continuous
VDC
Coil Resistance
Ohm ± 10%
1 Form A
1 Form C
3
5
2.4
4.0
3.9
6.5
15
42
AZ762P2-1AE-3D
AZ762P2-1AE-5D
AZ762P2-1AE-6D
AZ762P2-1AE-9D
AZ762P2-1AE-12D
AZ762P2-1AE-24D
AZ762P2-1CE-3D
AZ762P2-1CE-5D
AZ762P2-1CE-6D
AZ762P2-1CE-9D
AZ762P2-1CE-12D
AZ762P2-1CE-24D
6
4.8
7.8
60
9
7.2
11.7
15.6
31.2
135
240
886
12
24
9.6
19.2
* “1AE” or “1CE” denote silver tin oxide contacts.
Substitute “1AT” in place of “1AE” for silver tin oxide contacts with tungsten premake contact.
Add suffix “E” at the end of the order number for sealed version.
Add suffix “K” at the end of the order number for 3.5 mm pin spacing version. (not available for “1AT” version)
Add suffix “R” at the end of the order number for reversed polarity coil.
WIRING DIAGRAM
Standard Polarity
1 FORM A
Single coil latching Dual coil latching
1 FORM C
Single coil latching
Dual coil latching
4
4
4
4
4
6
4
6
4
6
4
3
3
3
3
3
3
3
3
6
1(+)
2(-) 1(-)
2(+)
1(-) 5(+)
SET
5(+) 2(-)
RESET
1(+)
2(-) 1(-)
2(+)
1(-) 5(+)
SET
5(+) 2(-)
RESET
SET
RESET
SET
RESET
Reversed Polarity
4
4
4
4
4
6
4
4
6
4
6
3
3
3
3
3
3
3
3
6
1(-)
2(+) 1(+)
2(-)
1(+) 5(-)
SET
5(-) 2(+)
RESET
1(-)
2(+) 1(+)
2(-)
1(+) 5(-)
SET
5(-) 2(+)
RESET
SET
RESET
SET
RESET
Viewed toward terminals
Contact positions are shown in energized coil state.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
fax: +49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2013-07-18
AZ762P
MECHANICAL DATA
PC BOARD LAYOUT
5.0 mm Spacing - Standard version
20.3
0.4
0.3
1.55
5
5
29.4
12.7
2.15
2.75
* Not used on single coil version
*
7.5
0.3
15.7
3.5
3 x ø 1.5
3 x ø 1.0
Not used on 1 Form A version
0.3
0.2
0.3
0.1
7.5
Viewed toward terminals
0.3
20.3
0.1
0.1
5
5
terminal not used on single coil version
0.04
3 x 0.5
*
0.04
3 x 1
0.04
0.04
3 x 0.5
3 x 0.5
* Terminal not used on 1 Form A version
3.5 mm Spacing - "K" version
20.3
0.4
0.3
29.4
12.7
3.05
3.5 3.5
2.15
2.75
* Not used on single coil version
*
7.5
0.3
15.7
3.5
3 x ø 1.5
3 x ø 1.0
Not used on 1 Form A version
0.3
0.2
0.3
0.1
7.5
Viewed toward terminals
0.3
20.3
0.1
0.1
3.5
3.5
terminal not used on single coil version
0.04
3 x 0.5
*
0.04
3 x 1
0.04
0.04
3 x 0.5
3 x 0.5
* Terminal not used on 1 Form A version
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
2013-07-18
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
相关型号：
©2020 ICPDF网 联系我们和版权申明