概述
规格参数
数据手册
替代型号PTH03030WAS 概述
DC-DC CONVERTERS POLA Non-isolated DC-DC变换器的POLA非隔离 DC/DC转换器 电源模块
PTH03030WAS 规格参数
| 是否无铅： | 含铅 | 是否Rohs认证： | 不符合 |
| 生命周期： | Transferred | 包装说明： | , |
| Reach Compliance Code： | unknown | ECCN代码： | EAR99 |
| 风险等级： | 5.19 | Is Samacsys： | N |
| 模拟集成电路 - 其他类型： | DC-DC REGULATED POWER SUPPLY MODULE | 最大输入电压： | 3.65 V |
| 最小输入电压： | 2.95 V | 标称输入电压： | 3.3 V |
| JESD-30 代码： | R-XDMA-X13 | JESD-609代码： | e0 |
| 功能数量： | 1 | 输出次数： | 1 |
| 端子数量： | 13 | 最大输出电压： | 2.5 V |
| 最小输出电压： | 0.8 V | 封装主体材料： | UNSPECIFIED |
| 封装形状： | RECTANGULAR | 封装形式： | MICROELECTRONIC ASSEMBLY |
| 峰值回流温度（摄氏度）： | NOT SPECIFIED | 认证状态： | Not Qualified |
| 表面贴装： | NO | 技术： | HYBRID |
| 端子面层： | TIN LEAD | 端子形式： | UNSPECIFIED |
| 端子位置： | DUAL | 处于峰值回流温度下的最长时间： | NOT SPECIFIED |
| 最大总功率输出： | 75 W | 微调/可调输出： | YES |
| Base Number Matches： | 1 |
PTH03030WAS 数据手册
通过下载PTH03030WAS数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载PTH03030
3 . 3 V i n s i n g l e o u t p u t
DC-DC CONVERTERS POLA Non-isolated
1
NEW Product
• 30 A output current
• 3.3 V input voltage
• Wide-output voltage adjust (0.8 Vdc to 2.5 Vdc)
• Auto-track™ sequencing*
• Margin up/down controls
• Pre-bias start-up capability
• Efficiencies up to 93%
• Output ON/OFF inhibit
• Output voltage sense
• Point-of-Load-Alliance (POLA) compatible
• Available RoHS compliant
The PTH03030 is a next generation series of non-isolated dc-dc converters offering some
of the most advanced POL features available in the industry. The primary new feature
provides for sequencing between multiple modules, a function, which is becoming a
necessity for powering advanced silicon including DSP’s, FPGA’s and ASIC’s requiring
controlled power-up and power-down. Other industry leading features include margin
up/down controls, pre-bias start-up capability and efficiencies up to 93%. The PTH03030
has an input voltage of 2.95 Vdc to 3.65 Vdc and offers a wide 0.8 Vdc to 2.5 Vdc output
voltage range with up to 30 A output current, which allows for maximum design flexibility
and a pathway for future upgrades.
2 YEAR WARRANTY
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
SPECIFICATIONS
C
in = 1500 µF, Cout = 0 µF
OUTPUT SPECIFICATIONS
EMC CHARACTERISTICS
Voltage adjustability
Setpoint accuracy
Line regulation
(See Note 4)
0.8-2.5 Vdc
2.0% Vo
Electrostatic discharge
Conducted immunity
Radiated immunity
EN61000-4-2, IEC801-2
EN61000-4-6
EN61000-4-3
10 mV typ.
12 mV typ.
3.0% Vo
GENERAL SPECIFICATIONS
Efficiency
Load regulation
Total regulation
Minimum load
(See Efficiency Table)
93% max.
Non-isolated
Insulation voltage
0 A
Switching frequency
275 kHz to 325 kHz
Ripple and noise
20 MHz bandwidth
30 mV pk-pk
0.5% Vo
Approvals and
standards
EN60950
UL/cUL60950
Temperature co-efficient -40 ºC to +85 ºC
Transient response
70 µs recovery time
Material flammability
UL94V-0
(See Note 5)
Overshoot/undershoot 100 mV
Dimensions
(L x W x H)
34.80 x 28.45 x 9.00 mm
1.370 x 1.120 x 0.354 in
Margin adjustment
5.0% Vo
Weight
MTBF
10 g (0.35 oz)
INPUT SPECIFICATIONS
Input voltage range
Input current
Telcordia SR-332
2,821,000 hours
(See Note 3)
2.95-3.65 Vdc
10 mA typ.
Positive logic
1 V/ms
No load
ENVIRONMENTAL SPECIFICATIONS
Remote ON/OFF
Start-up time
(See Note 1)
Thermal performance
(See Note 2)
Operating ambient,
temperature
Non-operating
-40 ºC to +85 ºC
-40 ºC to +125 ºC
Level 3
Undervoltage lockout
Track input voltage
2.8-2.95 V typ.
0.3 Vin
MSL (‘Z’ suffix only)
JEDEC J-STD-020C
Auto reset
Pin 11 (See Note 6, 7)
PROTECTION
Short-circuit
Thermal
45 A typ.
Yes
International Safety Standard Approvals
UL/cUL CAN/CSA-C22.2 No. 60950-1-03/UL 60950-1,
File No. E174104
TÜV Product Service (EN60950) Certificate No. B 04 06 38572 044
CB Report and Certificate to IEC60950, Certificate No.
US/8292/UL
*Auto-track™ is a trade mark of
Texas Instruments
File Name: pth03030.pdf Rev (07): 16 Dec 2005
PTH03030
3 . 3 V i n s i n g l e o u t p u t
DC-DC CONVERTERS POLA Non-isolated
2
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
NEW Product
OUTPUT
POWER
(MAX.)
OUTPUT
CURRENT
(MIN.)
OUTPUT
CURRENT
(MAX.)
REGULATION
INPUT
OUTPUT
VOLTAGE
EFFICIENCY
(MAX.)
MODEL
VOLTAGE
NUMBER (9,10)
LINE
10 mV
LOAD
75 W
2.95-3.65 Vdc
0.8-2.5 Vdc
0 A
30 A
93%
12 mV
PTH03030
Part Number System with Options
P T H 0 3 0 3 0 W A S T
Packaging Options
No Suffix = Trays
T = Tape and Reel (8)
Product Family
Point of Load Alliance
Compatible
Mounting Option (9)
D = Horizontal Through-Hole (Matte Sn)
H = Horizontal Through-Hole (Sn/Pb)
Input Voltage
03 = 3.3 V
S = Surface-Mount (63/37 Sn/Pb
pin solder material)
Z = Surface-Mount (96.5/3.0/0.5 Sn/Ag/Cu
pin solder material)
Output Current
03 = 30 A
Pin Option
Mechanical Package
A = Through-Hole Std. Pin Length (0.140”)
A = Surface-Mount Tin/Lead Solder Balll
Always 0
Output Voltage Code
W = Wide
Output Voltage Adjustment of the PTH03030 Series
The ultra-wide output voltage trim range offers major advantages to users who
select the PTH03030. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.8 Vdc to 2.5 Vdc. When the PTH03030 converter
leaves the factory the output has been adjusted to the default voltage of 0.8 V.
Notes
EFFICIENCY TABLE (IO = 20 A)
1
Remote ON/OFF. Positive Logic
OUTPUT VOLTAGE
Vo = 1.0 V
EFFICIENCY
85%
ON:
OFF:
Pin 3 open; or V > Vin - 0.5 V
Pin 3 GND; or V < 0.8 V (min - 0.2 V)
2
3
See Figure 1 for safe operating curve.
A 1,500 µF electrolytic input capacitor is required for proper operation.
The capacitor must be rated for a minimum of 900 mA rms of ripple
current.
An external output capacitor is not required for basic operation. Adding
330 µF of distributed capacitance at the load will improve the transient
response.
Vo = 1.2 V
87%
Vo = 1.5 V
89%
4
Vo = 1.8 V
91%
5
6
7
1 A/µs load step, 50 to 100% I
If utilized Vout will track applied voltage by 0.3 V (up to Vo set point).
The pre-bias start-up feature is not compatible with Auto-Track . This is
because when the module is under Auto-Track control, it is fully active
, C
= 330 µF.
omax
out
Vo = 2.0 V
92%
™
™
Vo = 2.5 V
93%
and will sink current if the output voltage is below that of a back-feeding
source. Therefore to ensure a pre-bias hold-off, one of the following two
techniques must be followed when input power is first applied to the
™
module. The Auto-Track function must either be disabled, or the
module’s output held off using the Inhibit pin. Refer to Application Note
152 for more details.
Tape and reel packaging only available on the surface-mount versions.
To order Pb-free (RoHS compatible) surface-mount parts replace the
mounting option ‘S’ with ‘Z’, e.g. PTH03030WAZ. To order Pb-free
(RoHS compatible) through-hole parts replace the mounting option ‘H’
with ‘D’, e.g. PTH03030WAD.
8
9
10 NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool at
http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
File Name: pth03030.pdf Rev (07): 16 Dec 2005
PTH03030
3 . 3 V i n s i n g l e o u t p u t
DC-DC CONVERTERS POLA Non-isolated
3
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
NEW Product
90
80
70
60
50
40
30
20
100
90
80
70
60
50
40
Vout
2.5V
1.8V
1.5V
1.2V
0.8V
400 LFM
200 LFM
100 LFM
Nat conv
0
5
10
15
20
25
30
0
5
10
15
20
25
30
OUTPUT CURRENT (A)
OUTPUT CURRENT (A)
Figure 2 - Efficiency vs Load Current
Vin = 3.3 V (See Note B)
Figure 1 - Safe Operating Area
Vin = 3.3 V, Output Voltage = 2.5 V (See Note A)
Notes
Track
Margin Down
A
B
SOA curves represent the conditions at which internal components are
within the Artesyn derating guidelines.
Characteristic data has been developed from actual products tested at
25 °C. This data is considered typical data for the converter.
Margin Up
13
12 11
1
2
10
9
8
Vin
PTH03030
(Top View)
Vout
7
3
L
4
5
6
O
A
D
Inhibit
Vo Sense
+
+
C
in 1,500µF
C
out 330µF
R
SET 0.5%, 0.1W
(Required)
(Optional)
(Required)
GND
GND
Figure 3 - Standard Application
File Name: pth03030.pdf Rev (07): 16 Dec 2005
PTH03030
3 . 3 V i n s i n g l e o u t p u t
DC-DC CONVERTERS POLA Non-isolated
4
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
NEW Product
1.370 (34.80)
0.125 (3.18)
0.125 (3.18)
0.140
(3.55)
0.060
(1.52)
0.060
(1.52)
0.500
0.500
(12.70)
(12.70)
ø
0.040 (1.02)
13 Places
10
0.125 (3.18)
13 12 11
1
0.500
(12.70)
0.375
(9.52)
Lowest Component
0.010 min. (0.25)
Bottom side Clearance
1.120
(28.45)
2
3
9
8
0.125 (3.18)
0.375
(9.52)
PIN CONNECTIONS
0.375
(9.52)
(0.070 (1.78)
PIN NO.
FUNCTION
Ground
Vin
(Standoff Shoulder)
5
6
4
1
2
7
TOP VIEW
Host Board
3
Ground
Inhibit*
0.354 (9.00)
max.
Dimensions in Inches (mm)
Tolerances (unless otherwise specified)
2 Places 0.030 ( 0.76)
4
SIDE VIEW
3 Places 0.010 ( 0.25)
5
Vo adjust
Vo sense
Ground
Vout
Figure 4 - Plated Through-Hole Mechanical Drawing
6
7
8
9
Vout
1.370 (34.80)
10
11
12
13
Ground
Track
0.125 (3.18)
0.125 (3.18)
0.354 (9.00)
max.*
*After solder reflow
on customer board
0.060
(1.52)
0.060
(1.52)
0.500
(12.70)
0.500
(12.70)
Margin down*
Margin up*
10
Solder Ball
0.125 (3.18)
13 12 11
1
ø
0.040 (1.02)
13 Places
0.500
*Denotes negative logic:
Open = Normal operation
Ground = Function active
0.375
(9.52)
(12.70)
1.120
(28.45)
2
3
9
8
0.125 (3.18)
0.375
(9.52)
0.375
(9.52)
4
5
6
7
TOP VIEW
SIDE VIEW
Dimensions in Inches (mm)
Tolerances (unless otherwise specified)
2 Places 0.030 ( 0.76)
3 Places 0.010 ( 0.25)
Figure 5 - Surface-Mount Mechanical Drawing
Datasheet © Artesyn Technologies
® 2005
The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent
accompany the sale of any such product(s) or information contained herein.
Please consult our website for the following items: ꢀ Application Note
www.artesyn.com
File Name: pth03030.pdf Rev (07): 16 Dec 2005
PTH03030WAS 替代型号
| 型号 | 制造商 | 描述 | 替代类型 | 文档 |
| PTH03030WAZT | ARTESYN | DC-DC CONVERTERS POLA Non-isolated | 完全替代 |
|
| PTH03030WAZ | ARTESYN | DC-DC CONVERTERS POLA Non-isolated | 完全替代 |
|
| PTH03030WAST | TI | 30-A, 3.3-V Input Non-Isolated Wide-Output Adjust Power Module | 类似代替 |
|
PTH03030WAS 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| PTH03030WAST | ARTESYN | DC-DC CONVERTERS POLA Non-isolated | 获取价格 |
|
| PTH03030WAST | TI | 30-A, 3.3-V Input Non-Isolated Wide-Output Adjust Power Module | 获取价格 |
|
| PTH03030WAST | EMERSON-NETWORKPOWER | DC-DC CONVERTERS POLA Non-isolated | 获取价格 |
|
| PTH03030WAZ | ARTESYN | DC-DC CONVERTERS POLA Non-isolated | 获取价格 |
|
| PTH03030WAZ | TI | 30-A, 3.3-V Input Non-Isolated Wide-Output Adjust Power Module | 获取价格 |
|
| PTH03030WAZT | ARTESYN | DC-DC CONVERTERS POLA Non-isolated | 获取价格 |
|
| PTH03030WAZT | TI | 30-A, 3.3-V Input Non-Isolated Wide-Output Adjust Power Module | 获取价格 |
|
| PTH03050 | ARTESYN | DC-DC CONVERTERS POLA Non-isolated | 获取价格 |
|
| PTH03050 | EMERSON-NETWORKPOWER | DC-DC CONVERTERS POLA Non-isolated | 获取价格 |
|
| PTH03050W | TI | 6-A, 5-V Input Non-Isolated Wide-Output Adjust Power Module | 获取价格 |
|
PTH03030WAS 相关文章
6 月上海@AutoSEMI 与 AutoPEPS 2025 峰会，双核驱动汽车「芯」与「无感」未来
- 2025-04-29
- 14
EMC 设计：滤波、接地、屏蔽及 PCB 布局的专业解析
- 2025-04-29
- 14
芯片高温危机：探寻高效散热的新路径
- 2025-04-29
- 16
拆解小米充电器，国产芯方案高性价比揭秘
- 2025-04-29
- 15
