Consumer Aftermarket Catalog
Glass & Ceramic Tube Fuses
1
Automotive
Fast-Acting /
4” Diameter Fuses
Used in older-model cars, glass tube fuses today are found primarily in
automotive accessory applications. The expansive Cooper Bussmann line of
glass fuses includes many types and sizes in addition to those listed in this
catalog. Call Cooper Bussmann for more product details if you have
requirements which are not covered here.
AGA - 1/
4
” x 5/
8” Fast-Acting Glass Tube Fuses
Part No.
(Amps)*
Appliances and Consumer Electronics
AGA-1/
4
Glass and ceramic tube uses are often used to protect appliances and
consumer electronics. As electronic equipment becomes smaller, the circuits
and components become more delicate and easily damaged. Fuses are the
preferred method of protection due to their accuracy, small size and
reliability. Fuses are available in a wide variety of amp ratings to provide
precise protection. Generally, two sizes of user-replaceable fuses are found:
AGA-1
AGA-11/
AGA-2
2
AGA-21/
AGA-3
AGA-5
AGA-6
AGA-15
2
the 1/
ratings.
Fuse Types
4
”x11/
” and 5 x 20mm. Each is available in a variety of volt and amp
4
*See Price Sheet
for all available
ratings.
There are two basic types of fuses available for appliances and consumer
electronics: fast-acting or time-delay. Any replacement fuse must match the
one it’s replacing. In general, fast-acting fuses are a single strand of wire or
strip of metal. Time-delay fuses usually have a coiled wire, a thick element
wrapped in wire, or a spring. Most electronic fuses will have the voltage and
amp rating stamped on the end cap. The type of fuse can generally be
visually identified. Also, owner’s manuals will have the correct replacement
fuse generically identified. For example: “Use a 2 amp, time-delay, 250 volt
fuse.”
AGW - 1/
4
” x 7/
” Fast-Acting Glass Tube Fuses
8
Part No.
(Amps)*
Blister
Pack
Tri-Lingual
Blister
AGW-1
AGW-21/
2
AGW-3
AGW-4
AGW-5
AGW-6
Glass and ceramic tube fuses vary by diameter and length:
• AGU fuses: 13/32”x11/
”
2
AGW-71/
AGW-10
AGW-15
AGW-20
AGW-30
2
• ABC, AGC, GBB, MDA, MDL and MDQ fuses: 1/
• AGX fuses: 1/
”x1”
• GBC fuses: 1/
• AGW fuses: 1/
• AGA fuses: 1/ ”x5/
• SFE fuses are 1/
” diameter and change in length as amp ratings increase
4
”x11/
4”
4
X
X
X
X
4
”x31/32
”
4
”x7/
"
8
*See Price Sheet for all available ratings.
4
8”
4
• GDA, GDB, GDC, GMA, GMC and GMD fuses: 5 x 20mm
AGX - 1/
” x 1” Fast-Acting Glass Tube Fuses
4
Fuse Selection Criteria
• For electronic/electrical applications, fuse must be rated at 125V or better.
Part No.
(Amps)*
Blister
Pack
Poly-
bag
Tri-Lingual
Blister
• Voltage must match or exceed the fuse being replaced (125V for
household current; 12V for auto; 24V for heavy duty).
AGX-1
AGX-2
• Fuse must match required fuse characteristic – either fast-acting or
time-delay.
AGX-21/
AGX-3
2
• Amp rating must match that of the original fuse.
AGX-5
AGX-7
A Note on Voltage Rating
X
All fuses have a voltage rating. To maintain safety, this voltage rating should
not be exceeded in application, although it is acceptable to use a higher
rated fuse in a lower voltage application. For example: A fuse rated for 125
volts is appropriate in household (110V) or automotive (12V), while a fuse
rated for 32 volts is appropriate for automotive (12V), but not for household
(125V). Always replace a fuse with one of the same or higher voltage rating.
AGX-10
AGX-15
AGX-20
AGX-30
X
X
*See Price Sheet for all available ratings.
See page 4 for technical specifications.
For product information and Data Sheets, visit www.cooperbussmann.com
34
小米 AI 眼镜技术亮点：双芯架构助力智能穿戴跨越发展
AI 芯片风云：台积电能否超越英伟达成新霸主？
锁存型霍尔 IC：原理、应用大揭秘
HBM 角逐：定制化、混合键合等技术成竞争关键
概述
数据手册
替代型号
