首页 > S6012R56

S6012R56

更新时间：2025-07-09 12:50:11
品牌：LITTELFUSE
描述：Teccor brand Thyristors 12 Amp Standard SCRs

PDF下载

中文翻译

免费 PCB/SMT

S6012R56 概述

Teccor brand Thyristors 12 Amp Standard SCRs Teccor牌晶闸管12安培标准的SCR

S6012R56 数据手册

通过下载S6012R56数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
Teccor® brandThyristors  
12 Amp Standard SCRs  
Sxx12x Series  
Description  
Excellent unidirectional switches for phase control  
applications such as heating and motor speed controls.  
Standard phase control SCRs are triggered with few  
milliamperes of current at less than 1.5V potential.  
Features & Benefits  
• RoHS compliant  
• Voltage capability up  
to 1000 V  
• Glass – passivated  
junctions  
• Surge capability up to  
120 A  
Applications  
Main Features  
Typical applications are capacitive discharge systems for  
strobe lights, nailers, staplers and gas engine ignition. Also  
controls for power tools, home/brown goods and white  
goods appliances.  
Symbol  
Value  
12  
Unit  
A
IT(RMS)  
VDRM/VRRM  
IGT  
400 to 1000  
20  
V
mA  
Schematic Symbol  
A
K
G
Absolute Maximum Ratings  
Symbol  
Parameter  
Test Conditions  
Value  
Unit  
Sxx12R  
IT(RMS)  
RMS on-state current  
Sxx12D  
Sxx12V  
TC = 105°C  
TC =105°C  
12  
A
Sxx12R  
Sxx12D  
Sxx12V  
IT(AV)  
Average on-state current  
7. 6  
A
A
single half cycle; f = 50Hz;  
100  
120  
TJ (initial) = 25°C  
ITSM  
Peak non-repetitive surge current  
single half cycle; f = 60Hz;  
TJ (initial) = 25°C  
I2t  
I2t Value for fusing  
Critical rate of rise of on-state current  
Peak gate current  
tp = 8.3 ms  
f = 60Hz; TJ = 125°C  
TJ = 125°C  
60  
100  
A2s  
A/μs  
A
di/dt  
IGM  
2
PG(AV)  
Average gate power dissipation  
Storage temperature range  
0.5  
W
TJ = 125°C  
-40 to 150  
-40 to 125  
Tstg  
°C  
TJ  
Operating junction temperature range  
Note: xx = voltage  
Sxx12x Series  
©2011 Littelfuse, Inc  
253  
Revised: June 24, 2011 04:57 PM  
Specifications are subject to change without notice.  
Please refer to http://www.littelfuse.com for current information.  
Teccor® brandThyristors  
12 Amp Standard SCRs  
Electrical Characteristics (TJ = 25°C, unless otherwise specified)  
Symbol  
IGT  
Test Conditions  
Value  
20  
Unit  
mA  
V
MAX.  
MIN.  
MAX.  
VD = 12V RL = 60 Ω  
1
VGT  
1.5  
400V  
600V  
800V  
1000V  
400V  
600V  
800V  
350  
300  
250  
100  
250  
225  
200  
VD = VDRM; gate open;TJ = 100°C  
VD = VDRM; gate open;TJ = 125°C  
dv/dt  
MIN.  
V/μs  
VGD  
IH  
VD = VDRM RL = 3.3 kΩ TJ = 125°C  
MIN.  
MAX.  
MAX.  
TYP.  
0.2  
40  
35  
2
V
mA  
μs  
IT = 200mA (initial)  
tq  
IT = 2A; tp = 50µs; dv/dt = 5V/µs; di/dt = 30A/µs  
tgt  
IG = 2 x IGT PW = 15µs IT = 20A  
μs  
Static Characteristics  
Symbol  
Test Conditions  
IT = 24A; tp = 380 µs  
Value  
1.6  
Unit  
VTM  
MAX.  
MAX.  
V
400 – 600V  
800 – 1000V  
400 – 800V  
1000V  
10  
TJ = 25°C  
20  
I
DRM / IRRM  
VDRM = VRRM  
500  
3000  
1000  
μA  
TJ = 100°C  
TJ = 125°C  
400 – 800V  
Thermal Resistances  
Symbol  
Parameter  
Value  
1.5  
Unit  
Sxx12R  
Sxx12V  
Sxx12D  
Sxx12R  
Sxx12V  
Junction to case (AC)  
1.6  
°C/W  
Rθ(J-C)  
1.4  
40  
Junction to ambient  
°C/W  
Rθ(J-A)  
70  
Note: xx = voltage  
Sxx12x Series  
©2011 Littelfuse, Inc  
254  
Revised: June 24, 2011 04:57 PM  
Specifications are subject to change without notice.  
Please refer to http://www.littelfuse.com for current information.  
Teccor® brandThyristors  
12 Amp Standard SCRs  
Figure 1: Normalized DC GateTrigger Current  
vs. JunctionTemperature  
Figure 2: Normalized DC GateTriggerVoltage  
vs. JunctionTemperature  
2.0  
1.5  
1.0  
0.5  
0.0  
2.0  
1.5  
1.0  
0.5  
0.0  
-40  
-15  
10  
35  
60  
85  
110  
125  
-40  
-15  
10  
35  
60  
85  
100  
125  
JunctionTemperature (TJ) - (°C)  
JunctionTemperature (TJ ) - (°C)  
Figure 3: Normalized DC Holding Current  
vs. JunctionTemperature  
Figure 4: On-State Current vs. On-State  
Voltage (Typical)  
60  
2.0  
1.5  
1.0  
0.5  
0.0  
TJ = 25°C  
50  
40  
30  
20  
10  
0
0.6  
-40  
-15  
10  
35  
60  
85  
110  
125  
0.7  
0.8  
0.9  
1.0  
1.1  
1.2  
1.3  
1.4  
1.5  
1.6  
JunctionTemperature (TJ ) - (°C)  
Instantaneous On-stateVoltage (vT) –Volts  
Figure 5: Power Dissipation (Typical)  
vs. RMS On-State Current  
12  
10  
8
6
4
2
0
0
2
4
6
8
10  
12  
RMS On-State Current [I T(RMS)] - (Amps)  
Sxx12x Series  
©2011 Littelfuse, Inc  
Specifications are subject to change without notice.  
Please refer to http://www.littelfuse.com for current information.  
255  
Revised: June 24, 2011 04:57 PM  
Teccor® brandThyristors  
12 Amp Standard SCRs  
Figure 6: Maximum Allowable CaseTemperature  
Figure 7: Maximum Allowable CaseTemperature  
vs. Average On-State Current  
vs. RMS On-State Current  
130  
125  
120  
115  
110  
105  
100  
95  
130  
125  
120  
115  
110  
105  
CURRENTWAVEFORM: Sinusoidal  
LOAD: Resistive or Inductive  
CONDUCTION ANGLE: 180°  
CURRENTWAVEFORM: Sinusoidal  
100  
LOAD: Resistive or Inductive  
CONDUCTION ANGLE: 180°  
0
2
4
6
8
10  
12  
14  
95  
0
1
2
3
4
5
6
7
8
RMS On-State Current [IT(RMS)] - Amps  
Average On-State Current [IT(AVE)] - Amps  
Figure 8: Maximum Allowable AmbientTemperature  
vs. RMS On-State Current  
Figure 9: Maximum Allowable AmbientTemperature  
vs. Average On-State Current  
120  
120  
CURRENTWAVEFORM: Sinusoidal  
LOAD: Resistive or Inductive  
CONDUCTION ANGLE: 180°  
CURRENTWAVEFORM: Sinusoidal  
LOAD: Resistive or Inductive  
CONDUCTION ANGLE: 180°  
FREE AIR RATING  
100  
80  
60  
40  
20  
0
FREE AIR RATING  
100  
80  
Sxx12R  
Sxx12R  
Sxx12V  
60  
Sxx12V  
40  
20  
0
0.0  
0.5  
1.0  
1.5  
0.0  
0.5  
1.0  
1.5  
2.0  
2.5  
Average On-State Current [IT(AVE)] - Amps  
RMS On-State Current [IT(RMS)] - Amps  
Note: xx = voltage  
Figure 10: Peak Capacitor Discharge Current  
Figure 11: Peak Capacitor Discharge Current Derating  
1.2  
1.0  
0.8  
0.6  
0.4  
0.2  
0.0  
1000  
100  
ITRM  
tW  
10  
0 5.  
0
25  
50  
75  
100  
125  
150  
5.0  
25.0  
50.0  
Pulse Current Duration (tw) - ms  
CaseTemperature (TC) - °C  
Sxx12x Series  
©2011 Littelfuse, Inc  
256  
Revised: June 24, 2011 04:57 PM  
Specifications are subject to change without notice.  
Please refer to http://www.littelfuse.com for current information.  
Teccor® brandThyristors  
12 Amp Standard SCRs  
Figure 12: Surge Peak On-State Current vs. Number of Cycles  
1000  
SUPPLY FREQUENCY: 60 Hz Sinusoidal  
LOAD: Resistive  
RMS On-State Current: [IT(RMS)]: Maximum Rated  
Value at Specified Case Temperature  
100  
10  
1
Notes:  
1. Gate control may be lost during and immediately  
following surge current interval.  
2. Overload may not be repeated until junction  
temperature has returned to steady-state  
rated value.  
1
10  
100  
1000  
Surge Current Duration - Full Cycles  
Soldering Parameters  
Reflow Condition  
Pb – Free assembly  
150°C  
tP  
TP  
TL  
TS(max)  
TS(min)  
25  
-Temperature Min (Ts(min)  
)
Ramp-up  
Pre Heat -Temperature Max (Ts(max)  
)
200°C  
tL  
-Time (min to max) (ts)  
60 – 180 secs  
Ramp-down  
Preheat  
Average ramp up rate (LiquidusTemp)  
(TL) to peak  
5°C/second max  
tS  
TS(max) toTL - Ramp-up Rate  
5°C/second max  
217°C  
-Temperature (TL) (Liquidus)  
Reflow  
time to peak temperature  
-Temperature (tL)  
60 – 150 seconds  
260+0/-5 °C  
Time  
PeakTemperature (TP)  
Time within 5°C of actual peak  
Temperature (tp)  
20 – 40 seconds  
Ramp-down Rate  
5°C/second max  
8 minutes Max.  
280°C  
Time 25°C to peakTemperature (TP)  
Do not exceed  
Sxx12x Series  
©2011 Littelfuse, Inc  
Specifications are subject to change without notice.  
257  
Revised: June 24, 2011 04:57 PM  
Please refer to http://www.littelfuse.com for current information.  
Teccor® brandThyristors  
12 Amp Standard SCRs  
Physical Specifications  
Environmental Specifications  
Test  
AC Blocking  
Specifications and Conditions  
Terminal Finish  
Body Material  
Lead Material  
100% MatteTin-plated  
MIL-STD-750, M-1040, Cond A Applied  
Peak AC voltage @ 125°C for 1008 hours  
UL recognized epoxy meeting flammability  
classification 94V-0  
MIL-STD-750, M-1051,  
100 cycles; -40°C to +150°C; 15-min  
dwell-time  
Temperature Cycling  
Copper Alloy  
EIA / JEDEC, JESD22-A101  
1008 hours; 320V - DC: 85°C; 85%  
rel humidity  
Temperature/  
Humidity  
MIL-STD-750, M-1031,  
1008 hours; 150°C  
HighTemp Storage  
Low-Temp Storage  
Design Considerations  
1008 hours; -40°C  
Careful selection of the correct device for the application’s  
operating parameters and environment will go a long way  
toward extending the operating life of theThyristor. Good  
design practice should limit the maximum continuous  
current through the main terminals to 75% of the device  
rating. Other ways to ensure long life for a power discrete  
semiconductor are proper heat sinking and selection of  
voltage ratings for worst case conditions. Overheating,  
overvoltage (including dv/dt), and surge currents are  
the main killers of semiconductors. Correct mounting,  
soldering, and forming of the leads also help protect  
against component damage.  
MIL-STD-750, M-1056  
10 cycles; 0°C to 100°C; 5-min dwell-  
time at each temperature; 10 sec (max)  
transfer time between temperature  
Thermal Shock  
Autoclave  
EIA / JEDEC, JESD22-A102  
168 hours (121°C at 2 ATMs) and  
100% R/H  
Resistance to  
Solder Heat  
MIL-STD-750 Method 2031  
Solderability  
Lead Bend  
ANSI/J-STD-002, category 3, Test A  
MIL-STD-750, M-2036 Cond E  
Dimensions —TO-220AB (R-Package) — Non-Isolated MountingTab Common with Center Lead  
T
C MEASURING POINT  
AREA (REF.) 0.17 IN2  
Inches  
Millimeters  
Min  
O
Dimension  
8.13  
.320  
A
E
Min  
Max  
0.420  
0.115  
0.250  
0.620  
0.147  
0.130  
0.575  
0.035  
0.205  
0.105  
0.075  
0.095  
0.024  
0.188  
0.060  
0.048  
Max  
10.67  
2.92  
6.35  
15.75  
3.73  
3.30  
14.61  
0.89  
5.21  
2.67  
1.91  
P
ANODE  
A
B
C
D
E
0.380  
0.105  
0.230  
0.590  
0.142  
0.110  
0.540  
0.025  
0.195  
0.095  
0.060  
0.085  
0.018  
0.178  
0.045  
0.038  
9.65  
2.67  
5.84  
14.99  
3.61  
2.79  
13.72  
0.64  
4.95  
2.41  
1.52  
B
C
13.36  
.526  
D
7. 01  
.276  
NOTCH IN  
GATE LEAD  
TO ID.  
NON-ISOLATED  
TAB  
F
F
G
H
J
R
G
L
H
K
CATHODE ANODE GATE  
N
K
J
L
Note: Maximum torque to  
be applied to mounting tab  
is 8 in-lbs. (0.904 Nm).  
M
M
N
O
P
2.16  
0.46  
4.52  
1.14  
2.41  
0.61  
4.78  
1.52  
R
0.97  
1.22  
Sxx12x Series  
©2011 Littelfuse, Inc  
Specifications are subject to change without notice.  
258  
Revised: June 24, 2011 04:57 PM  
Please refer to http://www.littelfuse.com for current information.  
Teccor® brandThyristors  
12 Amp Standard SCRs  
Dimensions —TO-251AA (V/I-Package) —V/I-PAKThrough Hole  
TC MEASURING POINT  
AREA: 0.040 IN2  
Inches  
Typ  
Millimeters  
Typ  
Dimension  
Min  
Max  
0.050  
0.245  
0.375  
0.213  
0.265  
0.033  
0.093  
0.095  
0.184  
0.023  
0.044  
0.023  
0.052  
0.044  
0.044  
0.084  
Min  
1.02  
5.97  
8.89  
5.21  
6.48  
0.69  
2.21  
2.16  
4.47  
0.46  
0.97  
0.46  
1.06  
0.86  
0.86  
1.86  
Max  
1.27  
6.22  
9.53  
5.41  
6.73  
0.84  
2.36  
2.41  
4.67  
0.58  
1.12  
0.58  
1.32  
1.11  
E
H
J
5.28  
.208  
Anode  
A
D
A
B
C
D
E
F
0.040  
0.235  
0.350  
0.205  
0.255  
0.027  
0.087  
0.085  
0.176  
0.018  
0.038  
0.018  
0.042  
0.034  
0.034  
0.074  
0.044  
0.242  
0.361  
0.208  
0.262  
0.031  
0.090  
0.092  
0.180  
0.020  
0.040  
0.020  
0.047  
0.039  
0.039  
0.079  
1.11  
6.15  
9.18  
5.29  
6.66  
0.80  
2.28  
2.34  
4.57  
0.51  
1.01  
5.34  
.210  
B
R
P
Q
S
G
H
I
K
C
J
K
L
Cathode  
L
F
0.52  
1.20  
Anode  
GATE  
G
P
Q
R
S
I
1.00  
1.00  
1.11  
2.00  
2.11  
Dimensions —TO-252AA (D-Package) — D-PAK Surface Mount  
E
6.71  
.264  
Anode  
5.28  
.208  
TC MEASURING POINT  
Inches  
Typ  
Millimeters  
Typ  
D
Dimension  
Min  
0.040  
0.235  
0.106  
0.205  
0.255  
0.027  
0.087  
0.085  
0.176  
0.018  
0.038  
0.018  
0.000  
0.021  
0°  
Max  
0.050  
0.245  
0.113  
0.213  
0.265  
0.033  
0.093  
0.095  
0.184  
0.023  
0.044  
0.023  
0.004  
0.027  
5°  
Min  
1.02  
5.97  
2.69  
5.21  
6.48  
0.69  
2.21  
2.16  
4.47  
0.46  
0.97  
0.46  
0.00  
0.53  
0°  
Max  
1.27  
6.22  
2.87  
5.41  
6.73  
0.84  
2.36  
2.41  
4.67  
0.58  
1.12  
0.58  
0.10  
0.69  
5°  
A
B
6.71  
.264  
5.34  
.210  
A
B
C
D
E
F
0.043  
0.243  
0.108  
0.208  
0.262  
0.031  
0.090  
0.092  
0.179  
0.020  
0.040  
0.020  
0.000  
0.026  
0°  
1.09  
6.16  
2.74  
1.60  
.063  
P
Q
C
1.80  
.071  
5.29  
6.65  
0.80  
2.28  
2.33  
4.55  
0.51  
1.02  
GATE  
F
AREA: 0.040 IN2  
Cathode  
Anode  
3
.118  
4.60  
.181  
G
I
G
H
I
L
O
H
K
J
M
N
J
K
L
0.51  
0.00  
0.67  
0°  
M
N
O
P
Q
0.042  
0.034  
0.047  
0.039  
0.052  
0.044  
1.06  
0.86  
1.20  
1.32  
1.11  
1.00  
Sxx12x Series  
©2011 Littelfuse, Inc  
Specifications are subject to change without notice.  
Please refer to http://www.littelfuse.com for current information.  
259  
Revised: June 24, 2011 04:57 PM  
Teccor® brandThyristors  
12 Amp Standard SCRs  
Product Selector  
Voltage  
Part Number  
Gate Sensitivity  
Type  
Package  
400V  
600V  
800V  
1000V  
Sxx12R  
Sxx12V  
X
X
X
X
X
X
X
X
X
X
X
X
20mA  
20mA  
20mA  
Sensitive SCR  
Standard SCR  
Standard SCR  
TO-220R  
TO-251  
TO-252  
Sxx12D  
Note: xx = voltage  
Packing Options  
Part Number  
Sxx12R  
Marking  
Weight  
Packing Mode  
Base Quantity  
Sxx12R  
Sxx12R  
Sxx12D  
Sxx12D  
Sxx12V  
2.2 g  
2.2 g  
0.3 g  
0.3 g  
0.4 g  
Bulk  
Tube  
500  
Sxx12RTP  
Sxx12DTP  
Sxx12DRP  
500 (50 per tube)  
750 (75 per tube)  
2500  
Tube  
Embossed Carrier  
Tube  
Sxx12VTP  
750 (75 per tube)  
Note: xx = Voltage  
TO-252 Embossed Carrier Reel Pack (RP) Specifications  
Meets all EIA-481-2 Standards  
Part Marking System  
TO-251AA – (V Package)  
TO-252AA – (D Package)  
0.059  
(1.5)  
0.157  
(4.0)  
DIA  
Gate  
Cathode  
S6012RTP  
YM  
0.63  
(16.0)  
0.524  
(13.3)  
*
®
0.315  
(8.0)  
*
Cover tape  
Anode  
12.99  
(330.0)  
0.512 (13.0)  
Arbor Hole  
Diameter  
Dimensions  
are in inches  
(and millimeters).  
Part Numbering System  
0.64  
(16.3)  
S 60 12 R  
56  
DEVICE TYPE  
S: SCR  
LEAD FORM DIMENSIONS  
xx: Lead Form Option  
Direction of Feed  
VOLTAGE RATING  
SENSITIVITY & TYPE  
(blank): 20mA  
40: 400V  
60: 600V  
80: 800V  
K0: 1000V  
PACKAGE TYPE  
CURRENT RATING  
12: 12A  
R: TO-220 Non-Isolated  
V: TO-251 (V/I-Pak)  
D: TO-252 (D-Pak)  
Sxx12x Series  
©2011 Littelfuse, Inc  
260  
Revised: June 24, 2011 04:57 PM  
Specifications are subject to change without notice.  
Please refer to http://www.littelfuse.com for current information.  

S6012R56 相关器件

型号 制造商 描述 价格 文档
S6012R56V TECCOR Silicon Controlled Rectifier, 12A I(T)RMS, 600V V(DRM), 600V V(RRM), 1 Element, TO-220AB, TO-220AB, 3 PIN 获取价格
S6012R59V LITTELFUSE Silicon Controlled Rectifier, 12A I(T)RMS, 600V V(DRM), 600V V(RRM), 1 Element, TO-220AB, TO-220AB, 3 PIN 获取价格
S6012RTP LITTELFUSE Silicon Controlled Rectifier, 12A I(T)RMS, 600V V(DRM), 600V V(RRM), 1 Element, TO-220AB, ROHS COMPLIANT, PLASTIC PACKAGE-3 获取价格
S6012RV LITTELFUSE Silicon Controlled Rectifier 获取价格
S6012V LITTELFUSE SCRs (1 A to 70 A) 获取价格
S6012V TECCOR SCRs 获取价格
S6012V56 LITTELFUSE Teccor brand Thyristors 12 Amp Standard SCRs 获取价格
S6012VTP LITTELFUSE Silicon Controlled Rectifier, 12A I(T)RMS, 600V V(DRM), 600V V(RRM), 1 Element, TO-251AA, ROHS COMPLIANT, PLASTIC, V/IPAK-3 获取价格
S6012VTP56 LITTELFUSE Silicon Controlled Rectifier, 12A I(T)RMS, 600V V(DRM), 600V V(RRM), 1 Element, TO-251AA, ROHS COMPLIANT, PLASTIC, V/IPAK-3 获取价格
S6015L LITTELFUSE SCRs (1 A to 70 A) 获取价格

S6012R56 相关文章

  • 小米 AI 眼镜技术亮点：双芯架构助力智能穿戴跨越发展
    2025-07-11
    17
  • AI 芯片风云：台积电能否超越英伟达成新霸主？
    2025-07-11
    15
  • 锁存型霍尔 IC：原理、应用大揭秘
    2025-07-11
    17
  • HBM 角逐：定制化、混合键合等技术成竞争关键
    2025-07-11
    13

    • 热门型号

  • 1N5930
  • 1N5942B
  • 1N4001
  • MBR3050CT
  • RTA02-8D
  • 4116T
  • 5KP43A/4
  • 1N5260A
  • MC79L05
  • BZX85C30
  • 9510-G
  • W2PE-54WZ-P
  • 1N6063
  • 2SA673
  • 20IMX35
    • Hi,有什么可以帮您？ 在线客服 或 微信扫码咨询
  • 概述
  • 数据手册
    • 2025 ICPDF网 联系我们和版权申明:QQ 272164286