首页 > 放大器电路 > 运算放大器 > MAX4383EUD

MAX4383EUD

更新时间：2025-07-03 02:11:29
品牌：MAXIM
描述：Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable

PDF下载

中文翻译

免费 PCB/SMT

MAX4383EUD 概述

Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable 超小型，低成本， 210MHz，单电源运算放大器，带有满摆幅输出及禁止 运算放大器 运算放大器

MAX4383EUD 规格参数

是否无铅： 含铅是否Rohs认证： 不符合
生命周期：Obsolete零件包装代码：TSSOP
包装说明：4.40 MM, TSSOP-14针数：14
Reach Compliance Code：not_compliantECCN代码：EAR99
HTS代码：8542.33.00.01风险等级：5.14
放大器类型：OPERATIONAL AMPLIFIER架构：VOLTAGE-FEEDBACK
最大平均偏置电流 (IIB)：25 µA标称共模抑制比：95 dB
频率补偿：YES最大输入失调电压：24000 µV
JESD-30 代码：R-PDSO-G14JESD-609代码：e0
长度：5 mm低-偏置：NO
低-失调：NO微功率：NO
湿度敏感等级：1负供电电压上限：-6 V
标称负供电电压 (Vsup)：-5 V功能数量：4
端子数量：14最高工作温度：85 °C
最低工作温度：-40 °C封装主体材料：PLASTIC/EPOXY
封装代码：TSSOP封装等效代码：TSSOP14,.25
封装形状：RECTANGULAR封装形式：SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
峰值回流温度（摄氏度）：240功率：NO
电源：+-2.25/+-5.5/4.5/11 V可编程功率：NO
认证状态：Not Qualified座面最大高度：1.1 mm
子类别：Operational Amplifier最大压摆率：40 mA
供电电压上限：6 V标称供电电压 (Vsup)：5 V
表面贴装：YES技术：BIPOLAR
温度等级：INDUSTRIAL端子面层：Tin/Lead (Sn85Pb15)
端子形式：GULL WING端子节距：0.65 mm
端子位置：DUAL处于峰值回流温度下的最长时间：20
宽带：YES宽度：4.4 mm
Base Number Matches：1

MAX4383EUD 数据手册

通过下载MAX4383EUD数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
19-2012; Rev 2; 4/03  
Ultra-Small, Low-Cost, 210MHz, Single-Supply  
Op Amps with Rail-to-Rail Outputs and Disable  
General Description  
Features  
The MAX4380–MAX4384 family of op amps are unity-  
gain-stable devices that combine high-speed perfor-  
ꢀ Low Cost and High Speed:  
210MHz -3dB Bandwidth  
55MHz 0.1dB Gain Flatness  
485V/µs Slew Rate  
®
mance, Rail-to-Rail outputs, and high-impedance  
disable mode. These devices operate from a +4.5V to  
+11V single supply or from ±±.±5V to ±5.5V dual sup-  
plies. The common-mode input voltage range extends  
beyond the negative power-supply rail (ground in sin-  
gle-supply applications).  
ꢀ Disable Mode Places Outputs in High-Impedance  
State  
ꢀ Single +4.5V to +11V Operation  
ꢀ Rail-to-Rail Outputs  
The MAX4380–MAX4384 require only 5.5mA of quies-  
cent supply current per op amp while achieving a  
±10MHz -3dB bandwidth, 55MHz 0.1dB gain flatness  
and a 485V/µs slew rate. These devices are an excel-  
lent solution in low-power/low-voltage systems that  
require wide bandwidth, such as video, communica-  
tions, and instrumentation.  
ꢀ Input Common-Mode Range Extends Beyond V  
ꢀ Low Differential Gain/Phase: 0.02%/0.08°  
EE  
ꢀ Low Distortion at 5MHz  
-65dBc SFDR  
The MAX4380 single with disable is available in an ultra-  
small 6-pin SC70 package.  
-63dB Total Harmonic Distortion  
ꢀ Ultra-Small 6-Pin SC70, 6-Pin SOT23, 10-Pin µMAX,  
14-Pin TSSOP, and 20-Pin TSSOP Packages  
Applications  
Set-Top Boxes  
Surveillance Video Systems  
Battery-Powered Instruments  
Analog-to-Digital Converter Interface  
CCD Imaging Systems  
Video Routing and Switching Systems  
Digital Cameras  
Video-on-Demand  
Ordering Information  
PIN-  
PACKAGE  
TOP  
MARK  
PART  
TEMP RANGE  
MAX4380EXT-T  
MAX4380EUT-T  
MAX4381EUB  
MAX4382EUD  
MAX4382ESD  
MAX4382EEE  
MAX4383EUD  
MAX4383ESD  
MAX4383ESE  
MAX4383EEE  
MAX4384EUP  
-40°C to +85°C 6 SC70-6  
-40°C to +85°C 6 SOT23-6  
-40°C to +85°C 10 µMAX  
-40°C to +85°C 14 TSSOP  
-40°C to +85°C 14 SO  
AAV  
—
—
—
—
—
—
—
—
—
—
-40°C to +85°C 16 QSOP  
-40°C to +85°C 14 TSSOP  
-40°C to +85°C 14 SO  
Video Line Driver  
Typical Operating Circuit  
-40°C to +85°C 16 SO  
-40°C to +85°C 16 QSOP  
-40°C to +85°C 20 TSSOP  
DISABLE  
IN  
75Ω  
OUT  
Pin Configurations  
Z = 75Ω  
o
MAX4380  
TOP VIEW  
75Ω  
OUT  
1
2
3
6
5
4
V
CC  
MAX4380  
500Ω  
V
EE  
DISABLE  
IN-  
500Ω  
IN+  
VIDEO LINE DRIVER  
SC70-6/SOT23-6  
Pin Configurations continued at end of data sheet.  
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.  
________________________________________________________________ Maxim Integrated Products  
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at  
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.  
Ultra-Small, Low-Cost, 210MHz, Single-Supply  
Op Amps with Rail-to-Rail Outputs and Disable  
ABSOLUTE MAXIMUM RATINGS  
Supply Voltage (V  
to V )................................................+12V  
14-Pin SO (derate 8.3mW/°C above +70°C)...............667mW  
16-Pin QSOP (derate 8.3mW/°C above +70°C)..........667mW  
16-Pin Narrow SO (derate 8.7mW/°C above +70°C) ..696mW  
20-Pin TSSOP (derate 10.9mW/°C above +70°C).......879mW  
Operating Temperature Range. ..........................-40°C to +85°C  
Junction Temperature......................................................+150°C  
Storage Temperature Range.............................-65°C to +150°C  
Lead Temperature (soldering, 10s) .................................+300°C  
CC  
EE  
IN_-, IN_+, OUT_, DISABLE_...........(V - 0.3V) to (V  
+ 0.3V)  
EE  
CC  
Output Short-Circuit to V  
or V ...........................................1s  
CC  
EE  
Continuous Power Dissipation (T = +70°C)  
A
6-Pin SC70 (derate 3.1mW/°C above +70°C) .............245mW  
6-Pin SOT23 (derate 7.1mW/°C above +70°C)...........571mW  
10-Pin µMAX (derate 5.6mW/°C above +70°C) ..........444mW  
14-Pin TSSOP (derate 9.1mW/°C above +70°C).........727mW  
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional  
operation of the device at these or at any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure  
to absolute maximum rating conditions for extended periods may affect device reliability.  
DC ELECTRICAL CHARACTERISTICS–Single Supply  
(V  
= +5V, V = 0, V  
= V /2, V  
= V /2, R = ∞ to V /2, DISABLE_ = V  
(MAX4380/MAX4381/MAX4382/MAX4384),  
CC  
EE  
CM  
CC  
OUT  
CC  
L
CC  
CC  
T
= T  
to T  
, unless otherwise noted. Typical values are at T = +25°C.) (Note 1)  
A
MIN  
MAX A  
PARAMETER  
SYMBOL  
CONDITIONS  
Guaranteed by CMRR  
MIN  
- 0.2  
TYP  
MAX  
- 2.25  
UNITS  
Input Common-Mode Voltage  
Range  
V
V
V
V
CM  
EE  
CC  
T
T
= +25°C  
0.2  
12  
A
V
Input Offset Voltage  
mV  
OS  
= -40°C to +85°C  
20  
A
Input Offset Voltage Matching  
Input Offset Voltage Tempco  
Input Bias Current  
MAX4381–MAX4384  
1
8
mV  
µV/°C  
µA  
TC  
VOS  
I
6.5  
0.5  
70  
3
20  
7
B
I
Input Offset Current  
µA  
OS  
Differential mode (-1V ≤ V ≤ +1V)  
kΩ  
IN  
R
Input Resistance  
IN  
Common mode (-0.2V ≤ V  
≤ +2.75V)  
MΩ  
CM  
V
- 0.2V ≤ V  
≤ V - 2.25V  
CM CC  
Common-Mode Rejection Ratio  
CMRR  
70  
95  
dB  
dB  
EE  
0.25V ≤ V  
0.8V ≤ V  
≤ 4.75V, R = 2kΩ  
L
50  
48  
61  
63  
OUT  
A
VOL  
≤ 4.5V, R = 150Ω  
L
Open-Loop Gain  
OUT  
1V ≤ V  
≤ 4V, R = 50Ω  
58  
OUT  
L
V
- V  
- V  
0.05  
0.05  
0.3  
0.25  
0.5  
0.5  
1
0.2  
0.15  
0.5  
CC  
OH  
R = 2kΩ  
L
V
V
V
V
V
V
V
OL  
CC  
OL  
CC  
OL  
CC  
OL  
EE  
- V  
OH  
EE  
R = 150Ω  
L
- V  
0.8  
V
Output Voltage Swing  
Output Current  
V
OUT  
- V  
- V  
0.8  
OH  
R = 75Ω  
L
1.75  
1.7  
EE  
- V  
OH  
EE  
R = 75Ω to  
L
ground  
- V  
CC  
0.025  
55  
0.125  
Sinking from R = 75Ω to V  
40  
25  
L
I
mA  
OUT  
Sourcing into R = 75Ω to V  
50  
L
EE  
Output Short-Circuit Current  
Open-Loop Output Resistance  
Power-Supply Rejection Ratio  
I
Sinking or sourcing  
mA  
Ω
100  
8
SC  
R
OUT  
V = +4.5V to +5.5V  
S
PSRR  
50  
62  
dB  
2
_______________________________________________________________________________________  
Ultra-Small, Low-Cost, 210MHz, Single-Supply  
Op Amps with Rail-to-Rail Outputs and Disable  
DC ELECTRICAL CHARACTERISTICS–Single Supply  
(V  
= +5V, V = 0, V  
= V /2, V  
= V /2, R = ∞ to V /2, DISABLE_ = V  
(MAX4380/MAX4381/MAX4382/MAX4384),  
CC  
EE  
CM  
CC  
OUT  
CC  
L
CC  
CC  
T
= T  
to T  
, unless otherwise noted. Typical values are at T = +25°C.) (Note 1)  
A
MIN  
MAX A  
PARAMETER  
SYMBOL  
CONDITIONS  
MIN  
4.5  
27  
TYP  
MAX  
UNITS  
Operating Supply Voltage  
Range  
V
S
Guaranteed by PSRR (Note 2)  
11  
V
kΩ  
V
Disabled Output Resistance  
35  
DISABLE_ = 0, 0 ≤ V  
≤ 5V  
OUT  
ROUT(OFF)  
V
V
CC  
- 3  
IL  
DISABLE_ Logic-Low Threshold  
V
V - 1.25  
CC  
V
IH  
DISABLE_ Logic-High Threshold  
DISABLE_ Logic Input Low  
I
25  
10  
60  
40  
µA  
µA  
mA  
IL  
DISABLE_ = 0  
Current  
DISABLE_ Logic Input High  
Current  
I
DISABLE_ = V  
IH  
CC  
5.5  
9
DISABLE_ = V  
DISABLE_ = 0  
CC  
Quiescent Supply Current (Per  
Amplifier)  
I
S
0.45  
0.6  
DC ELECTRICAL CHARACTERISTICS–Dual Supply  
(V  
= +5V, V  
= -5V, V  
= 0, V  
= 0, R = ∞ to 0, DISABLE_ = V  
(MAX4380/MAX4381/MAX4382/MAX4384),  
CC  
CC  
EE  
CM  
OUT  
L
T
= T  
to T  
, unless otherwise noted. Typical values are at T = +25°C.) (Note 1)  
A
MIN  
MAX A  
PARAMETER  
SYMBOL  
CONDITIONS  
MIN  
TYP  
MAX  
UNITS  
Input Common-Mode Voltage  
Range  
V
EE  
V
CC  
-2.25  
V
Guaranteed by CMRR  
V
CM  
T
T
= +25°C  
3
16  
24  
A
V
Input Offset Voltage  
mV  
OS  
= T  
to T  
MAX  
A
MIN  
Input Offset Voltage Matching  
Input Offset Voltage Tempco  
Input Bias Current  
MAX4381–MAX4384  
1
8
mV  
µV/°C  
µA  
TC  
VOS  
I
8.5  
0.5  
70  
3
25  
12  
B
I
Input Offset Current  
µA  
OS  
Differential mode (-1V ≤ V ≤ +1V)  
kΩ  
IN  
R
Input Resistance  
IN  
Common mode (-5V ≤ V  
≤ 2.75V)  
MΩ  
CM  
V
≤ V  
≤ V - 2.25V  
CM CC  
Common-Mode Rejection Ratio  
CMRR  
70  
95  
dB  
dB  
EE  
-4.5V ≤ V  
≤ +4.5V, R = 2kΩ  
50  
48  
62  
65  
OUT  
L
A
VOL  
-4.25V ≤ V  
≤ +4.25V, R = 150Ω  
Open-Loop Gain  
OUT  
L
-4V ≤ V  
≤ +4V, R = 50Ω  
60  
OUT  
L
V
V
V
V
V
V
- V  
0.175  
0.075  
0.575  
0.4  
0.375  
0.225  
0.85  
0.775  
2.3  
CC  
OL  
CC  
OL  
CC  
OL  
OH  
R = 2kΩ  
L
- V  
EE  
- V  
- V  
OH  
V
R = 150Ω  
L
Output Voltage Swing  
V
OUT  
EE  
- V  
1.3  
OH  
EE  
R = 75Ω  
L
- V  
1.3  
2.45  
_______________________________________________________________________________________  
3
Ultra-Small, Low-Cost, 210MHz, Single-Supply  
Op Amps with Rail-to-Rail Outputs and Disable  
DC ELECTRICAL CHARACTERISTICS–Dual Supply (continued)  
(V  
= +5V, V  
= -5V, V  
= 0, V  
= 0, R = ∞ to 0, DISABLE_ = V  
(MAX4380/MAX4381/MAX4382/MAX4384),  
CC  
EE  
CM  
OUT  
L
CC  
T
A
= T  
to T  
, unless otherwise noted. Typical values are at T = +25°C.) (Note 1)  
MIN  
MAX A  
PARAMETER  
SYMBOL  
CONDITIONS  
MIN  
50  
TYP  
75  
MAX  
UNITS  
Sinking from R = 75Ω to V  
L
CC  
I
Output Current  
mA  
OUT  
Sourcing into R = 75Ω to V  
50  
75  
L
EE  
Output Short-Circuit Current  
Open-Loop Output Resistance  
Power-Supply Rejection Ratio  
I
Sinking or sourcing  
mA  
Ω
100  
8
SC  
R
OUT  
PSRR  
V = 4.5V to 5.5V  
S
48  
62  
dB  
Operating Supply Voltage  
Range  
V
S
Guaranteed by PSRR (Note 2)  
DISABLE_ = 0, -5V ≤ V ≤ 5V  
2.25  
27  
5.5  
V
kΩ  
V
Disabled Output Resistance  
35  
OUT  
ROUT(OFF)  
V
V
- 3  
IL  
CC  
DISABLE_ Logic-Low Threshold  
V
V
CC  
- 1.25  
V
IH  
DISABLE_ Logic-High Threshold  
DISABLE_ Logic Input Low  
I
25  
10  
µA  
µA  
mA  
IL  
DISABLE_ = 0  
Current  
DISABLE_ Logic Input High  
Current  
I
DISABLE_ = V  
IH  
CC  
7.5  
10  
0.8  
DISABLE_ = V  
DISABLE_ = 0  
CC  
Quiescent Supply Current (Per  
Amplifier)  
I
S
0.45  
AC ELECTRICAL CHARACTERISTICS–Single Supply  
(V  
= +5V, V  
= 0, V  
= +1.5V, R = 100Ω to V /2, DISABLE_ = V  
(MAX4380/MAX4381/MAX4382/MAX4384),  
CC  
CC  
EE  
CM  
L
CC  
V
= V /2, A  
= +1V/V, T = +25°C, unless otherwise noted.)  
OUT  
CC  
VCL A  
PARAMETER  
SYMBOL  
CONDITIONS  
= 100mVp-p  
MIN  
TYP  
210  
175  
MAX  
UNITS  
MHz  
Small-Signal -3dB Bandwidth  
Large-Signal -3dB Bandwidth  
BW  
BW  
V
V
SS  
LS  
OUT  
OUT  
= 2Vp-p  
MHz  
Small-Signal 0.1dB Gain  
Flatness  
BW  
V
V
= 100mVp-p  
55  
40  
MHz  
MHz  
0.1dBSS  
OUT  
OUT  
Large-Signal 0.1dB Gain  
Flatness  
BW  
= 2Vp-p  
0.1dBLS  
SR  
Slew Rate  
V
V
V
= 2V step  
= 2V step  
= 100mVp-p  
485  
16  
V/µs  
ns  
OUT  
OUT  
OUT  
Settling Time to 0.1%  
Rise/Fall Time  
t
S
t
, t  
F
4
ns  
R
Spurious-Free Dynamic Range  
SFDR  
f
= 5MHz, V  
= 2Vp-p  
OUT  
-65  
-65  
-68  
-63  
dBc  
C
2nd harmonic  
3rd harmonic  
Total harmonic  
f
V
= 5MHz,  
C
Harmonic Distortion  
HD  
dBc  
dBc  
= 2Vp-p  
OUT  
Two-Tone, Third-Order  
Intermodulation Distortion  
f1 = 4.7MHz, f2 = 4.8MHz,  
V = 1Vp-p  
OUT  
IP3  
-66  
4
_______________________________________________________________________________________  
Ultra-Small, Low-Cost, 210MHz, Single-Supply  
Op Amps with Rail-to-Rail Outputs and Disable  
AC ELECTRICAL CHARACTERISTICS–Single Supply (continued)  
(V  
= +5V, V  
= 0, V  
= +1.5V, R = 100Ω to V /2, DISABLE_ = V  
(MAX4380/MAX4381/MAX4382/MAX4384),  
CC  
CC  
EE  
CM  
L
CC  
V
OUT  
= V /2, A  
= +1V/V, T = +25°C, unless otherwise noted.)  
VCL A  
CC  
PARAMETER  
SYMBOL  
CH  
CONDITIONS  
Specified at DC  
= 10MHz, A  
MIN  
TYP  
-102  
14  
MAX  
UNITS  
dB  
Channel-to-Channel Isolation  
Input 1dB Compression Point  
Differential Phase Error  
Differential Gain Error  
ISO  
f
= +2V/V  
VCL  
dBm  
degrees  
%
C
DP  
DG  
NTSC, R = 150Ω  
0.08  
0.02  
10  
L
NTSC, R = 150Ω  
L
Input Noise-Voltage Density  
Input Noise-Current Density  
Input Capacitance  
e
f = 10kHz  
f = 10kHz  
nV/√Hz  
pA/√Hz  
pF  
n
I
n
2
C
1
IN  
Output Impedance  
Z
f = 10MHz  
1.5  
Ω
OUT  
V
= 1V (MAX4380/MAX4381/  
IN  
Enable Time  
Disable Time  
t
100  
1
ns  
µs  
ON  
MAX4382/MAX4384)  
V
= 1V (MAX4380/MAX4381/  
IN  
t
OFF  
MAX4382/MAX4384)  
Note 1: All devices are 100% production tested at T = +25°C. Specifications over temperature limits are guaranteed by design.  
A
Note 2: PSRR for single +5V supply tested with V = 0, V  
= +4.5V to +5.5V; PSRR for dual 5V supply tested with V = -4.5V  
CC EE  
EE  
to -5.5V, V  
= +4.5V to +5.5V.  
CC  
Typical Operating Characteristics  
(V  
= +5V, V = 0, V  
= +1.5V, A  
= +1V/V, R = 100Ω to V /2, T = +25°C, unless otherwise noted.)  
CC  
EE  
CM  
VCL  
L
CC  
A
SMALL-SIGNAL GAIN FLATNESS  
vs. FREQUENCY  
LARGE-SIGNAL GAIN vs. FREQUENCY  
SMALL-SIGNAL GAIN vs. FREQUENCY  
4
3
0.4  
0.3  
4
V
OUT  
= 100mVp-p  
V
OUT  
= 2Vp-p  
V
OUT  
= 100mVp-p  
3
2
2
0.2  
1
0.1  
1
0
0
0
-1  
-2  
-3  
-4  
-5  
-6  
-0.1  
-0.2  
-0.3  
-0.4  
-0.5  
-0.6  
-1  
-2  
-3  
-4  
-5  
-6  
100k  
1M  
10M  
FREQUENCY (Hz)  
100M  
1G  
100k  
1M  
10M  
FREQUENCY (Hz)  
100M  
1G  
100k  
1M  
10M  
FREQUENCY (Hz)  
100M  
1G  
_______________________________________________________________________________________  
5
Ultra-Small, Low-Cost, 210MHz, Single-Supply  
Op Amps with Rail-to-Rail Outputs and Disable  
Typical Operating Characteristics (continued)  
(V  
= +5V, V = 0, V  
= +1.5V, A  
= +1, R = 100Ω to V /2, T = +25°C, unless otherwise noted.)  
CC  
EE  
CM  
VCL  
L
CC  
A
LARGE-SIGNAL  
GAIN FLATNESS vs. FREQUENCY  
DISTORTION vs. FREQUENCY  
OUTPUT IMPEDANCE vs. FREQUENCY  
0
0.3  
100  
10  
V
= 2V  
P-P  
OUT  
V
= 2Vp-p  
OUT  
-10  
-20  
0.2  
0.1  
A
= +1V/V  
VCL  
0
-30  
-40  
-0.1  
-0.2  
-0.3  
-0.4  
-0.5  
-50  
-60  
1
2ND HARMONIC  
-70  
-80  
0.1  
0.01  
3RD HARMONIC  
-0.6  
-0.7  
-90  
-100  
100k  
1M  
10M  
100M  
1G  
100k  
1M  
10M  
100M  
1G  
100k  
1M  
10M  
100M  
FREQUENCY (Hz)  
FREQUENCY (Hz)  
FREQUENCY (Hz)  
DISTORTION vs. FREQUENCY  
DISTORTION vs. FREQUENCY  
DISTORTION vs. RESISTIVE LOAD  
0
0
0
V
A
= 2Vp-p  
V
VCL  
= 2Vp-p  
f
V
A
= 5MHz  
OUT  
VCL  
-10  
-20  
-30  
-40  
-50  
-60  
-70  
-80  
-90  
-100  
-10  
-20  
OUT  
A
-10  
-20  
O
= +2V/V  
= +5V/V  
= 2Vp-p  
= +1V/V  
OUT  
VCL  
-30  
-40  
-30  
-40  
2ND HARMONIC  
3RD HARMONIC  
2ND HARMONIC  
3RD HARMONIC  
-50  
-60  
-50  
-60  
-70  
-80  
2ND HARMONIC  
3RD HARMONIC  
-70  
-80  
-90  
-90  
-100  
-100  
100k  
1M  
10M  
100M  
100k  
1M  
10M  
100M  
0
200  
400  
600  
(Ω)  
800 1000 1200  
FREQUENCY (Hz)  
FREQUENCY (Hz)  
R
LOAD  
COMMON-MODE REJECTION  
vs. FREQUENCY  
DISTORTION vs. VOLTAGE SWING  
DIFFERENTIAL GAIN AND PHASE  
0
0
-10  
-20  
-30  
-40  
-50  
-60  
-70  
-80  
-90  
-100  
0.025  
f
= 5MHz  
VCL  
-10  
-20  
-30  
-40  
-50  
-60  
-70  
-80  
-90  
-100  
O
A
0.020  
0.015  
0.010  
0.005  
0
= +1V/V  
-0.005  
-0.010  
0
0
100  
100  
IRE  
3RD HARMONIC  
2ND HARMONIC  
0.12  
0.10  
0.08  
0.06  
0.04  
0.02  
0
-0.02  
-0.04  
1.5  
0.5  
1.0  
2.0  
100k  
1M  
10M  
100M  
1G  
IRE  
VOLTAGE SWING (Vp-p)  
FREQUENCY (Hz)  
6
_______________________________________________________________________________________  
Ultra-Small, Low-Cost, 200MHz, Single-Supply  
Op Amps with Rail-to-Rail Outputs and Disable  
Typical Operating Characteristics (continued)  
(V  
= +5V, V = 0, V  
= +1.5V, A  
= +1, R = 100Ω to V /2, T = +25°C, unless otherwise noted.)  
CC  
EE  
CM  
VCL  
L
CC  
A
OUTPUT VOLTAGE SWING  
vs. RESISTIVE LOAD  
POWER-SUPPLY REJECTION  
vs. FREQUENCY  
OUTPUT VOLTAGE SWING  
vs. RESISTIVE LOAD  
0.8  
0.7  
0.6  
0.5  
0.4  
0.3  
0.2  
0.1  
0
0
-10  
-20  
-30  
-40  
-50  
-60  
-70  
-80  
1.6  
1.4  
1.2  
1.0  
0.8  
0.6  
0.4  
0.2  
0
V
= +5V  
V
= 5V  
SUPPLY  
SUPPLY  
V
- V  
V
- V  
CC OH  
CC OH  
V
- V  
OL EE  
V
- V  
OL EE  
0
50 100 150 200 250 300 350 400 450 500  
(Ω)  
100k  
1M  
10M  
100M  
1G  
0
50 100 150 200 250 300 350 400 450 500  
(Ω)  
R
FREQUENCY (Hz)  
R
LOAD  
LOAD  
SMALL-SIGNAL PULSE RESPONSE  
SMALL-SIGNAL PULSE RESPONSE  
SMALL-SIGNAL PULSE RESPONSE  
A
VCL  
= +1V/V  
R = 500Ω  
VCL  
F
R = 500Ω  
VCL  
F
A
= +5V/V  
A
= +2V/V  
INPUT  
25mV/div  
INPUT  
10mV/div  
INPUT  
50mV/div  
OUTPUT  
50mV/div  
OUTPUT  
50mV/div  
OUTPUT  
50mV/div  
20ns/div  
20ns/div  
20ns/div  
LARGE-SIGNAL PULSE RESPONSE  
LARGE-SIGNAL PULSE RESPONSE  
LARGE-SIGNAL PULSE RESPONSE  
R = 500Ω  
VCL  
R = 500Ω  
VCL  
A
VCL  
= +1V/V  
F
F
A
= +2V/V  
A
= +5V/V  
INPUT  
1V/div  
INPUT  
500mV/div  
INPUT  
200mV/div  
OUTPUT  
1V/div  
OUTPUT  
1V/div  
OUTPUT  
1V/div  
20ns/div  
20ns/div  
20ns/div  
_______________________________________________________________________________________  
7
Ultra-Small, Low-Cost, 210MHz, Single-Supply  
Op Amps with Rail-to-Rail Outputs and Disable  
Typical Operating Characteristics (continued)  
(V  
= +5V, V = 0, V  
= +1.5V, A  
= +1, R = 100Ω to V /2, T = +25°C, unless otherwise noted.)  
CC  
EE  
CM  
VCL  
L
CC  
A
ISOLATION RESISTANCE  
vs. CAPACITIVE LOAD  
VOLTAGE NOISE vs. FREQUENCY  
CURRENT NOISE vs. FREQUENCY  
100  
100  
16  
15  
14  
13  
12  
11  
10  
9
R = 100Ω  
L
R = 100Ω  
L
10  
10  
1
1
1M  
1
10  
100 1k 10k 100k  
FREQUENCY (Hz)  
10M  
1
10  
100 1k 10k 100k  
FREQUENCY (Hz)  
1M 10M  
0
50 100 150 200 250 300 350 400 450 500  
C
LOAD  
(pF)  
SMALL-SIGNAL BANDWIDTH  
vs. LOAD RESISTANCE  
CROSSTALK vs. FREQUENCY  
OPEN-LOOP GAIN vs. RESISTIVE LOAD  
60  
40  
80  
70  
60  
50  
300  
V
=
5V  
SUPPLY  
250  
200  
150  
100  
50  
20  
0
V
= +5V  
SUPPLY  
-20  
-40  
-60  
-80  
-100  
-120  
-140  
40  
30  
20  
10  
0
0
0.1M  
1M  
10M  
100M  
1G  
100  
1k  
10k  
0
100 200 300 400 500 600 700 800  
(Ω)  
FREQUENCY (Hz)  
R
LOAD  
(Ω)  
R
LOAD  
INPUT OFFSET VOLTAGE  
vs. TEMPERATURE  
INPUT BIAS CURRENT  
vs. TEMPERATURE  
SHUTDOWN RESPONSE  
MAX4380-84 toc27  
5
4
12  
10  
8
5V  
3
DISABLE  
0
V
= 5V  
SUPPLY  
2
1
V
= +5V  
SUPPLY  
0
6
V
= +5V  
SUPPLY  
-1  
-2  
-3  
-4  
-5  
1.5V  
4
V
=
5V  
SUPPLY  
V
OUT  
2
0
0
-50  
-25  
0
25  
50  
75  
100  
200ns/div  
-50  
-25  
0
25  
50  
75  
100  
TEMPERATURE (°C)  
TEMPERATURE (°C)  
8
_______________________________________________________________________________________  
Ultra-Small, Low-Cost, 210MHz, Single-Supply  
Op Amps with Rail-to-Rail Outputs and Disable  
Typical Operating Characteristics (continued)  
(V  
= +5V, V = 0, V  
= +1.5V, A  
= +1, R = 100Ω to V /2, T = +25°C, unless otherwise noted.)  
VCL L CC  
A
CC  
EE  
CM  
SUPPLY CURRENT  
vs. TEMPERATURE  
10  
9
8
7
6
5
4
3
2
1
0
V
=
5V  
SUPPLY  
V
= +5V  
SUPPLY  
-50  
-25  
0
25  
50  
75  
100  
TEMPERATURE (°C)  
Pin Description  
PIN  
MAX4382  
NAME  
FUNCTION  
MAX4380  
MAX4381  
µMAX  
MAX4383  
MAX4384  
TSSOP  
SC70/SOT23  
QSOP  
SO/TSSOP SO/TSSOP SO/QSOP  
Positive Power Supply.  
Connect a 0.1µF  
capacitor to GND.  
6
2
10  
4
4
4
4
4
5
V
CC  
Negative Power Supply.  
Connect a 0.1µF  
13  
11  
11  
13  
16  
V
EE  
Capacitor to GND.  
3
4
1
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
IN+  
IN-  
Noninverting Input  
Inverting Input  
OUT  
Amplifier Output  
Disable. Connect to V  
to Enable.  
CC  
5
—
—
—
—
—
—
DISABLE  
Amplifier A Noninverting  
Input  
—
3
5
5
3
3
4
INA+  
Amplifier A Inverting  
Input  
—
—
2
1
6
7
6
7
2
1
2
1
3
2
INA-  
OUTA  
Amplifier A Output  
Shutdown Amplifier A.  
—
—
5
7
1
1
—
—
1
6
DISABLEA  
Connect to V to  
CC  
Enable.  
Amplifier B Noninverting  
Input  
12  
10  
5
5
INB+  
_______________________________________________________________________________________  
9
Ultra-Small, Low-Cost, 210MHz, Single-Supply  
Op Amps with Rail-to-Rail Outputs and Disable  
Pin Description (continued)  
PIN  
NAME  
FUNCTION  
MAX4380  
MAX4381  
µMAX  
MAX4382  
MAX4383  
MAX4384  
TSSOP  
SC70/SOT23  
QSOP  
11  
SO/TSSOP SO/TSSOP SO/QSOP  
Amplifier B  
Inverting Input  
—
—
8
9
9
8
6
7
6
7
7
8
INB-  
10  
OUTB  
Amplifier B Output  
Shutdown Amplifier B.  
Connect to V to  
CC  
Enable.  
—
—
6
3
3
—
—
9
DISABLEB  
Amplifier C  
Noninverting Input  
—
14  
12  
10  
12  
15  
INC+  
Amplifier C  
Inverting Input  
—
—
—
—
15  
16  
13  
14  
9
8
11  
10  
14  
13  
INC-  
OUTC  
Amplifier C Output  
Shutdown Amplifier C.  
Connect to V to  
CC  
Enable.  
—
—
—
—
2
2
—
—
12  
17  
DISABLEC  
Amplifier D  
Noninverting Input  
—
—
12  
14  
IND+  
Amplifier D Inverting  
Input  
—
—
—
—
—
—
—
—
13  
14  
15  
16  
18  
19  
IND-  
OUTD  
Amplifier D Output  
Shutdown Amplifier D.  
—
—
—
—
—
—
—
—
—
—
20  
DISABLED  
Connect to V to  
CC  
Enable.  
No Connection. Not  
internally connected.  
8, 9  
8, 9  
10, 11  
N.C.  
Choosing Resistor Values  
Detailed Description  
Unity-Gain Configuration  
The MAX4380–MAX4384 are single-supply, rail-to-rail,  
voltage-feedback amplifiers that employ current-feed-  
back techniques to achieve 485V/µs slew rates and  
210MHz bandwidths. Excellent harmonic distortion and  
differential gain/phase performance make these ampli-  
fiers an ideal choice for a wide variety of video and RF  
signal-processing applications.  
The MAX4380–MAX4384 are internally compensated  
for unity gain. When configured for unity gain, a 24Ω  
resistor (R ) in series with the feedback path optimizes  
F
AC performance. This resistor improves AC response  
by reducing the Q of the parallel LC circuit formed by  
the parasitic feedback capacitance and inductance.  
Video Line Driver  
The MAX4380–MAX4384 are low-power, voltage-feed-  
back amplifiers featuring bandwidths up to 210MHz,  
0.1dB gain flatness to 55MHz. They are designed to  
minimize differential-gain error and differential-phase  
error to 0.02% and 0.08 degrees respectively. They  
Applications Information  
The output voltage swings to within 50mV of each sup-  
ply rail. Local feedback around the output stage  
ensures low open-loop output impedance to reduce  
gain sensitivity to load variations. The input stage per-  
mits common-mode voltages beyond the negative sup-  
ply and to within 2.25V of the positive supply rail.  
10 ______________________________________________________________________________________  
Ultra-Small, Low-Cost, 210MHz, Single-Supply  
Op Amps with Rail-to-Rail Outputs and Disable  
single-supply operation, bypass V  
to ground with a  
CC  
0.1µF capacitor as close to the pin as possible. If operat-  
ing with dual supplies, bypass each supply with a 0.1µF  
capacitor.  
R
F
R
G
Maxim recommends using microstrip and stripline  
techniques to obtain full bandwidth. To ensure that the  
PC board does not degrade the amplifier’s perfor-  
mance, design it for a frequency greater than 1GHz.  
Pay careful attention to inputs and outputs to avoid  
large parasitic capacitance. Whether or not you use a  
constant-impedance board, observe the following  
design guidelines:  
V
OUT  
MAX438 _  
IN  
V
= [1+ (R / R )] V  
OUT  
F
G
IN  
Figure 1a. Noninverting Gain Configuration  
• Don’t use wire-wrap boards; they are too inductive.  
• Don’t use IC sockets; they increase parasitic capaci-  
tance and inductance.  
R
F
R
G
IN  
• Use surface-mount instead of through-hole compo-  
nents for better high-frequency performance.  
V
OUT  
• Use a PC board with at least two layers; it should be  
MAX438 _  
as free from voids as possible.  
• Keep signal lines as short and as straight as possi-  
ble. Do not make 90° turns; round all corners.  
V
OUT  
= -(R / R ) V  
F G IN  
Rail-to-Rail Outputs,  
Ground-Sensing Inputs  
Figure 1b. Inverting Gain Configuration  
For +5V single-supply operation, the input common-  
mode range extends from (V  
- 200mV) to (V  
CC  
EE  
have a 16ns settling time to 0.1%, 485V/µs slew rates,  
and output-current-drive capability of up to 75mA  
making them ideal for driving video loads.  
- 2.25V) with excellent common-mode rejection.  
Beyond this range, the amplifier output is a nonlinear  
function of the input, but does not undergo phase  
reversal or latchup.  
Inverting and Noninverting Configurations  
For 5V dual-supply operation, the common-mode  
Select the gain-setting feedback (R ) and input (R )  
F
G
range is from V to (V  
- 2.25V)  
EE  
CC  
resistor values to fit your application. Large resistor val-  
ues increase voltage noise and interact with the ampli-  
fier’s input and PC board capacitance. This can  
generate undesirable poles and zeros and decrease  
bandwidth or cause oscillations. For example, a nonin-  
For +5V single-supply operation the output swings to  
within 50mV of either power-supply rail with a 2kΩ  
load. The input ground sensing and the rail-to-rail out-  
put substantially increase the dynamic range. With a  
symmetric input in a single +5V application, the input  
can swing 2.95Vp-p and the output can swing 4.9Vp-p  
with minimal distortion.  
verting gain-of-two configuration (R = R ) using 1kΩ  
F
G
resistors, combined with 1pF of amplifier input capaci-  
tance and 1pF of PC board capacitance, causes a  
pole at 159MHz. Since this pole is within the amplifier  
bandwidth, it jeopardizes stability. Reducing the 1kΩ  
resistors to 100Ω extends the pole frequency to  
1.59GHz, but could limit output swing by adding 200Ω  
in parallel with the amplifier’s load resistor  
(Figures 1a and 1b).  
Low-Power Disable Mode  
The disable feature (DISABLE_) allows the amplifier to  
be placed in a low-power, high-output-impedance  
state. When the disable pin (DISABLE_) is active, the  
amplifier’s output impedance is 35kΩ. This high resis-  
tance and the low 2pF output capacitance make the  
MAX4380–MAX4382 and the MAX4384 ideal in  
RF/video multiplexer or switch applications. For larger  
arrays, pay careful attention to capacitive loading.  
Refer to the Output Capacitive Loading and Stability  
section.  
Layout and Power-Supply Bypassing  
These amplifiers operate from a single +4.5V to +11V  
power supply or from dual 2.25V to 5.5V supplies. For  
______________________________________________________________________________________ 11  
Ultra-Small, Low-Cost, 210MHz, Single-Supply  
Op Amps with Rail-to-Rail Outputs and Disable  
R
F
R
G
6
5
C = 15pF  
L
R
ISO  
4
V
OUT  
3
MAX438 _  
V
IN  
2
C
L
C = 10pF  
L
1
0
C = 5pF  
L
-1  
-2  
-3  
-4  
Figure 2. Driving a Capacitive Load Through an Isolation Resistor  
ISOLATION RESISTANCE  
vs. CAPACITIVE LOAD  
100k  
1M  
10M  
FREQUENCY (Hz)  
100M  
1G  
16  
15  
14  
13  
12  
11  
10  
9
Figure 4. Small-Signal Gain vs. Frequency with Load  
Capacitance and No Isolation Resistor  
3
R
ISO  
= 15Ω  
2
1
C = 47pF  
L
0
-1  
-2  
-3  
-4  
-5  
-6  
-7  
0
50 100 150 200 250 300 350 400 450 500  
(pF)  
C = 68pF  
L
C
LOAD  
C = 120pF  
L
Figure 3. Isolation Resistance vs. Capacitive Load  
Output Capacitive Loading and Stability  
The MAX4380–MAX4384 are optimized for AC perfor-  
mance. They are not designed to drive highly reactive  
loads, which decrease phase margin and may produce  
excessive ringing and oscillation. Figure 2 shows a cir-  
cuit that eliminates this problem. Figure 3 is a graph of  
100k  
1M  
10M  
FREQUENCY (Hz)  
100M  
1G  
the Optimal Isolation Resistor (R ) vs. Capacitive Load.  
S
Figure 5. Small-Signal Gain vs. Frequency with Load  
Capacitance and 27Ω Isolation Resistor  
Figure 4 shows how a capacitive load causes exces-  
sive peaking of the amplifier’s frequency response if  
the capacitor is not isolated from the amplifier by a  
resistor. A small isolation resistor (usually 10Ω to 15Ω)  
placed before the reactive load prevents ringing and  
oscillation. At higher capacitive loads, AC performance  
is controlled by the interaction of the load capacitance  
and the isolation resistor. Figure 5 shows the effect of a  
15Ω isolation resistor on closed-loop response.  
Chip Information  
MAX4380 TRANSISTOR COUNT: 66  
MAX4381 TRANSISTOR COUNT: 132  
MAX4382 TRANSISTOR COUNT: 196  
MAX4383 TRANSISTOR COUNT: 264  
MAX4384 TRANSISTOR COUNT: 264  
12 ______________________________________________________________________________________  
Ultra-Small, Low-Cost, 210MHz, Single-Supply  
Op Amps with Rail-to-Rail Outputs and Disable  
Pin Configurations (continued)  
TOP VIEW  
DISABLEA  
DISABLEC  
DISABLEB  
1
2
3
4
5
6
7
8
16 OUTC  
15 INC-  
14 INC+  
TOP VIEW  
OUTA  
INA-  
1
2
3
4
5
10  
9
V
CC  
OUTB  
V
CC  
MAX4382  
13 V  
EE  
MAX4381  
INA+  
8
INB-  
INA+  
INA-  
12 INB+  
11 INB-  
10 OUTB  
V
EE  
7
INB+  
DISABLEA  
6
DISABLEB  
OUTA  
N.C.  
µMAX-10  
9
N.C.  
QSOP  
TOP VIEW  
TOP VIEW  
DISABLEA  
DISABLEC  
DISABLEB  
1
14 OUTC  
13 INC-  
12 INC+  
OUTA  
INA-  
1
2
3
4
5
6
7
14 OUTD  
13 IND-  
12 IND+  
2
3
4
5
6
7
INA+  
V
CC  
11  
V
EE  
MAX4382  
V
CC  
11  
V
EE  
MAX4383  
INA+  
INA-  
10 INB+  
INB+  
INB-  
10 INC+  
9
8
INB-  
9
8
INC-  
OUTA  
OUTB  
OUTB  
OUTC  
TSSOP/SO  
SO/TSSOP  
TOP VIEW  
TOP VIEW  
OUTA  
INA-  
1
16 OUTD  
15 IND-  
14 IND+  
DISABLEA  
OUTA  
1
2
3
4
5
6
7
8
9
20 DISABLED  
19 OUTD  
18 IND-  
2
3
4
5
6
7
8
INA+  
INA-  
INA+  
17 IND+  
V
CC  
MAX4383  
13 V  
EE  
MAX4384  
V
16  
15 INC+  
14  
V
EE  
INB+  
INB-  
12 INC+  
11 INC-  
10 OUTC  
CC  
INB+  
INB-  
INC-  
OUTB  
N.C.  
OUTB  
13 OUTC  
12 DISABLEC  
11 N.C.  
9
N.C.  
DISABLEB  
SO/QSOP  
N.C. 10  
TSSOP  
______________________________________________________________________________________ 13  
Ultra-Small, Low-Cost, 210MHz, Single-Supply  
Op Amps with Rail-to-Rail Outputs and Disable  
Package Information  
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information  
go to www.maxim-ic.com/packages.)  
PACKAGE OUTLINE, SOT-23, 6L  
1
21-0058  
F
1
14 ______________________________________________________________________________________  
Ultra-Small, Low-Cost, 210MHz, Single-Supply  
Op Amps with Rail-to-Rail Outputs and Disable  
Package Information (continued)  
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information  
go to www.maxim-ic.com/packages.)  
e
4X S  
10  
10  
INCHES  
DIM MIN  
MAX  
MILLIMETERS  
MIN  
-
MAX  
1.10  
0.15  
0.95  
3.05  
3.00  
3.05  
3.00  
5.05  
0.70  
A
-
0.043  
0.006  
0.037  
0.120  
0.118  
0.120  
0.118  
0.199  
A1  
A2  
D1  
D2  
E1  
E2  
H
0.002  
0.030  
0.116  
0.114  
0.116  
0.114  
0.187  
0.05  
0.75  
2.95  
2.89  
2.95  
2.89  
4.75  
0.40  
H
ÿ 0.50 0.1  
0.6 0.1  
L
0.0157 0.0275  
0.037 REF  
L1  
b
0.940 REF  
0.007  
0.0106  
0.177  
0.090  
0.270  
1
1
e
0.0197 BSC  
0.500 BSC  
0.6 0.1  
c
0.0035 0.0078  
0.0196 REF  
0.200  
BOTTOM VIEW  
E2  
0.498 REF  
S
TOP VIEW  
D2  
α
0∞  
6∞  
0∞  
6∞  
GAGE PLANE  
A2  
c
A
E1  
b
L
α
A1  
D1  
L1  
FRONT VIEW  
SIDE VIEW  
PROPRIETARY INFORMATION  
TITLE:  
PACKAGE OUTLINE, 10L uMAX/uSOP  
APPROVAL  
DOCUMENT CONTROL NO.  
REV.  
1
21-0061  
I
1
INCHES  
MILLIMETERS  
DIM  
A
MIN  
MAX  
0.069  
0.010  
0.019  
0.010  
MIN  
1.35  
0.10  
0.35  
0.19  
MAX  
1.75  
0.25  
0.49  
0.25  
0.053  
0.004  
0.014  
0.007  
N
A1  
B
C
e
0.050 BSC  
1.27 BSC  
E
0.150  
0.228  
0.016  
0.157  
0.244  
0.050  
3.80  
5.80  
0.40  
4.00  
6.20  
1.27  
E
H
H
L
VARIATIONS:  
INCHES  
1
MILLIMETERS  
DIM  
D
MIN  
MAX  
0.197  
0.344  
0.394  
MIN  
4.80  
8.55  
9.80  
MAX  
5.00  
N
MS012  
TOP VIEW  
0.189  
0.337  
0.386  
8 AA  
D
8.75 14  
10.00 16  
AB  
D
AC  
D
C
A
B
0∞-8∞  
e
A1  
L
FRONT VIEW  
SIDE VIEW  
PROPRIETARY INFORMATION  
TITLE:  
PACKAGE OUTLINE, .150" SOIC  
APPROVAL  
DOCUMENT CONTROL NO.  
REV.  
1
21-0041  
B
1
______________________________________________________________________________________ 15  
Ultra-Small, Low-Cost, 210MHz, Single-Supply  
Op Amps with Rail-to-Rail Outputs and Disable  
Package Information (continued)  
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information  
go to www.maxim-ic.com/packages.)  
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are  
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.  
16  
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-1737-7600  
Printed USA is a registered trademark of Maxim Integrated Products.  
© 2003 Maxim Integrated Products  

MAX4383EUD 替代型号

型号 制造商 描述 替代类型 文档
MAX4383EUD+T MAXIM Operational Amplifier, 4 Func, 24000uV Offset-Max, BIPolar, PDSO14, 4.40 MM, TSSOP-14 功能相似
MAX4383EUD-T MAXIM Operational Amplifier, 4 Func, 24000uV Offset-Max, BIPolar, PDSO14, 4.40 MM, TSSOP-14 功能相似

MAX4383EUD 相关器件

型号 制造商 描述 价格 文档
MAX4383EUD+T MAXIM Operational Amplifier, 4 Func, 24000uV Offset-Max, BIPolar, PDSO14, 4.40 MM, TSSOP-14 获取价格
MAX4383EUD-T MAXIM Operational Amplifier, 4 Func, 24000uV Offset-Max, BIPolar, PDSO14, 4.40 MM, TSSOP-14 获取价格
MAX4383EVKIT MAXIM Evaluation Kit for the MAX4383 获取价格
MAX4384 MAXIM Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable 获取价格
MAX4384 ADI 超小型、低成本、210MHz、单电源运算放大器，带有满摆幅输出及禁止功能 获取价格
MAX4384EUP MAXIM Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable 获取价格
MAX4384EUP-T MAXIM Operational Amplifier, 4 Func, 24000uV Offset-Max, BIPolar, PDSO20, 4.40 MM, TSSOP-20 获取价格
MAX4385E MAXIM Low-Cost, 230MHz, Single/Quad Op Amps with Rail-to-Rail Outputs and 【15kV ESD Protection 获取价格
MAX4385E ADI 低成本、230MHz、单/四路运算放大器，带有满摆幅输出及±15kV ESD保护 获取价格
MAX4385EEUK+ MAXIM Operational Amplifier, 1 Func, 28000uV Offset-Max, PDSO5, MO-178, SOT-23, 5 PIN 获取价格

MAX4383EUD 相关文章

  • 5V 过电压保护回路电路解析：复杂原理源于简单设计
    2025-07-04
    53
  • 先进封装：台积电、英特尔、三星等大厂的新战场
    2025-07-04
    83
  • 探秘台积电 SoW：从起源到应用的深度剖析
    2025-07-04
    31
  • 英特尔战略调整：舍弃 18A，全力进军 1.4nm 制程
    2025-07-04
    29

    • 热门型号

  • 1N5930
  • 1N5942B
  • 1N4001
  • MBR3050CT
  • RTA02-8D
  • 4116T
  • 5KP43A/4
  • 1N5260A
  • MC79L05
  • BZX85C30
  • 9510-G
  • W2PE-54WZ-P
  • 1N6063
  • 2SA673
  • 20IMX35
    • Hi,有什么可以帮您？ 在线客服 或 微信扫码咨询
  • 概述
  • 规格参数
  • 数据手册
  • 替代型号
    • 2025 ICPDF网 联系我们和版权申明:QQ 272164286