首页 > W5VS-12Y-M/K

W5VS-12Y-M/K

更新时间：2025-07-01 22:46:47

品牌：MSYSTEM

描述：Terminal Block Dual Output Signal Conditioners W5-UNIT

PDF下载

中文翻译

免费 PCB/SMT

概述
数据手册

如果您发现信息不准确，欢迎纠错

W5VS-12Y-M/K 概述

Terminal Block Dual Output Signal Conditioners W5-UNIT

W5VS-12Y-M/K 数据手册

通过下载W5VS-12Y-M/K数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载

MODEL: W5VS

(Choose 01 for CE. Power suffix code R only.)

Terminal Block Dual Output Signal Conditioners W5-UNIT

02: Specify voltage (See INPUT SPECIFICATIONS)

(CE not available. Power suffix code M, R2, P only.)

SIGNAL TRANSMITTER

Functions & Features

[2] OUTPUT 1

Current

• Converts a DC input into two isolated outputs

• Two independent output ranges

A: 4 – 20 mA DC (Load resistance 550 Ω max.)

B: 2 – 10 mA DC (Load resistance 1100 Ω max.)

C: 1 – 5 mA DC (Load resistance 2200 Ω max.)

D: 0 – 20 mA DC (Load resistance 550 Ω max.)

E: 0 – 16 mA DC (Load resistance 685 Ω max.)

F: 0 – 10 mA DC (Load resistance 1100 Ω max.)

G: 0 – 1 mA DC (Load resistance 11 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

• Four-way isolation (input to output 1 to output 2 to power)

• Fast response type available

• High-density mounting

45 (1.77)

(3.82)

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 100 Ω min.)

4: 0 – 10 V DC (Load resistance 1000 Ω min.)

5: 0 – 5 V DC (Load resistance 500 Ω min.)

6: 1 – 5 V DC (Load resistance 500 Ω min.)

4W: -10 – +10 V DC (Load resistance 2000 Ω min.)

5W: -5 – +5 V DC (Load resistance 1000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

41 (1.61)

mm (inch)

MODEL: W5VS-[1][2][3]-[4][5]

ORDERING INFORMATION

Specify a code from below for each [1] through [5].

• Code number: W5VS-[1][2][3]-[4][5]

(e.g. W5VS-6A6-R/K/Q)

• Special input and output ranges (For codes Z, 0, 01 & 02)

• Specify the specification for option code /Q

(e.g. /C01/V01/S01)

[3] OUTPUT 2

Same range availability as Output 1

Y: None

[1] INPUT

Current

[4] POWER INPUT

AC Power

A: 4 – 20 mA DC (Input resistance 249 Ω)

B: 2 – 10 mA DC (Input resistance 499 Ω)

C: 1 – 5 mA DC (Input resistance 1000 Ω)

D: 0 – 20 mA DC (Input resistance 49.9 Ω)

E: 0 – 16 mA DC (Input resistance 61.9 Ω)

F: 0 – 10 mA DC (Input resistance 100 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 20 Ω)

Z: Specify current (See INPUT SPECIFICATIONS)

Voltage

M: 85 – 264 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

(CE not available)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

R2: 11 – 27 V DC

(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)

(CE not available)

P: 110 V DC

16: 0 – 60 mV DC (Input resistance 1 MΩ min.)

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

4W: -10 – +10 V DC (Input resistance 1 MΩ min.)

5W: -5 – +5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

(CE not available. Power suffix code M, R2, P only.)

01: Specify voltage (See INPUT SPECIFICATIONS)

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

(CE not available)

[5] OPTIONS (multiple selections)

Response Time (0 – 90 %)

blank: Standard (≤ 0.5 sec.)

/K: Fast Response (Approx. 25 msec.)

Other Options

blank: none

W5VS SPECIFICATIONS

ES-8513 Rev.12 Page 1/3

http://www.m-system.co.jp/

MODEL: W5VS

/Q: Option other than the above (specify the specification)

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

Offset: Max. 1.5 times span

Load resistance: Output drive 11 V max.

■ DC Voltage: -10 – +12 V DC

Spans: Min. 5 mV, max. 20 V

/C02: Polyurethane coating

/C03: Rubber coating

Offset: Max. 1.5 times span

ADJUSTMENT

Load resistance: Output drive 10 mA max.; 5 mA for

negative voltage output; at ≥ 0.5 V

/V01: Multi-turn fine adjustment

/VN: Sealed adjustment holes

TERMINAL SCREW MATERIAL

/S01: Stainless steel

INSTALLATION

Power Consumption

•AC:

GENERAL SPECIFICATIONS

Construction: Terminal block

Approx. 4 VA at 100 V

Approx. 5 VA at 200 V

Connection

Approx. 6 VA at 264 V

Input: M3.5 screw terminals (torque 0.8 N·m)

Output & power: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel (standard) or stainless

steel

•DC: Approx. 3 W

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 0 to 90 %RH (non-condensing)

Mounting: DIN rail

Housing material: Flame-resistant resin (black)

Isolation: Input to output 1 to output 2 to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Zero adjustment: -2 to +2 % (front)

(±1 % with the input suffix codes 4W and 5W selected)

Span adjustment: 98 to 102 % (front)

(99 to 101 % with the input suffix codes 4W and 5W

selected.)

Weight: 130 g (0.29 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength:

2000 V AC @1 minute (input to output 1 or output 2 to

power to ground)

INPUT SPECIFICATIONS

■ DC Current: Input resistor incorporated

Specify input resistance value among followings for code Z.

20Ω, 49.9Ω, 61.9Ω, 100Ω, 249Ω, 499Ω, 1000Ω

1000 V AC @1 minute (output 1 to output 2)

(0.125 W ≥ [Input current]

× R)

STANDARDS & APPROVALS

EU conformity:

■ DC Voltage

Input resistance: 1 MΩ min.; 10 kΩ min. for the input code

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

10 kΩ min. at power loss

•Input code 0 (Not CE)

Voltage range: -300 – +300 V DC

Minimum span: 100 mV

EN 50581

Offset: Max. 1.5 times span

•Input code 01 (CE)

Voltage range: -70 – +70 V DC

Minimum span: 100 mV

Offset: Max. 1.5 times span

•Input code 02 (Not CE)

Voltage range: -100 – +100 mV DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

W5VS SPECIFICATIONS

ES-8513 Rev.12 Page 2/3

http://www.m-system.co.jp/

MODEL: W5VS

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

7.4 (.29)

5–M3.5 SCREW

DIN RAIL

35mm wide

6 (.24)

9 10 11

45 (1.77)

41 (1.61)

[3.3 (.13)]

6–M3 SCREW

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Low Drift

Amplifier

Output

Driver

–

INPUT

OUTPUT 1

Output

Driver

OUTPUT 2

POWER

–

U(+)

V(–)

*Input shunt resistor attached for current input.

Note 1: The section enclosed by broken line is only with 2nd output option.

Note 2: DO NOT connect to the terminals 1 – 2 – 3.

Specifications are subject to change without notice.

W5VS SPECIFICATIONS

ES-8513 Rev.12 Page 3/3

http://www.m-system.co.jp/

W5VS-12Y-M/K 相关器件

型号	制造商	描述	价格	文档
W5VS-12Y-M/Q	MSYSTEM	Terminal Block Dual Output Signal Conditioners W5-UNIT	获取价格
W5VS-12Y-P	MSYSTEM	Terminal Block Dual Output Signal Conditioners W5-UNIT	获取价格
W5VS-12Y-P/K	MSYSTEM	Terminal Block Dual Output Signal Conditioners W5-UNIT	获取价格
W5VS-12Y-P/Q	MSYSTEM	Terminal Block Dual Output Signal Conditioners W5-UNIT	获取价格
W5VS-12Y-R	MSYSTEM	Terminal Block Dual Output Signal Conditioners W5-UNIT	获取价格
W5VS-12Y-R/K	MSYSTEM	Terminal Block Dual Output Signal Conditioners W5-UNIT	获取价格
W5VS-12Y-R/Q	MSYSTEM	Terminal Block Dual Output Signal Conditioners W5-UNIT	获取价格
W5VS-12Y-R2	MSYSTEM	Terminal Block Dual Output Signal Conditioners W5-UNIT	获取价格
W5VS-12Y-R2/K	MSYSTEM	Terminal Block Dual Output Signal Conditioners W5-UNIT	获取价格
W5VS-12Y-R2/Q	MSYSTEM	Terminal Block Dual Output Signal Conditioners W5-UNIT	获取价格