R6535KNX3

更新时间:2024-11-08 05:38:50
品牌:ROHM
描述:R6xxxKNx系列是重视高效性,以高速开关性能为特点的Super Junction MOSFET产品。该系列产品可在追求高速开关的应用中实现更优异的性能。高速开关性能有助于实现PFC和LLC等电路的高效率化。

R6535KNX3 概述

R6xxxKNx系列是重视高效性,以高速开关性能为特点的Super Junction MOSFET产品。该系列产品可在追求高速开关的应用中实现更优异的性能。高速开关性能有助于实现PFC和LLC等电路的高效率化。

R6535KNX3 数据手册

通过下载R6535KNX3数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
R6535KNX3  
Datasheet  
Nch 650V 35A Power MOSFET  
llOutline  
TO-220AB  
VDSS  
650V  
0.115Ω  
±35A  
RDS(on)(Max.)  
ID  
PD  
370W  
llFeatures  
llInner circuit  
1) Low on-resistance  
2) Ultra fast switching  
3) Parallel use is easy  
4) Pb-free lead plating ; RoHS compliant  
llApplication  
llPackaging specifications  
Switching  
Packing  
Tube  
C16  
Packing code  
Marking  
R6535KNX3  
1000  
Quantity (pcs)  
llAbsolute maximum ratings (T = 25°C ,unless otherwise specified)  
a
Parameter  
Drain - Source voltage  
Symbol  
Value  
650  
Unit  
V
VDSS  
*1  
Continuous drain current (Tc = 25°C)  
Pulsed drain current  
ID  
±35  
A
*2  
IDP  
±105  
±20  
A
static  
V
VGSS  
IAS  
Gate - Source voltage  
AC(f1Hz)  
±30  
V
Avalanche current, single pulse  
Avalanche energy, single pulse  
Power dissipation (Tc = 25°C)  
Junction temperature  
6.6  
A
*3  
EAS  
867  
mJ  
W
PD  
Tj  
370  
150  
Tstg  
Operating junction and storage temperature range  
-55 to +150  
www.rohm.com  
© 2020 ROHMCo., Ltd. All rights reserved.  
1/11  
20201022 - Rev.002  
R6535KNX3  
Datasheet  
Unit  
llThermal resistance  
Values  
Min. Typ. Max.  
Parameter  
Symbol  
*4  
RthJC  
Thermal resistance, junction - case  
-
-
-
-
-
-
0.34 /W  
RthJA  
Tsold  
Thermal resistance, junction - ambient  
Soldering temperature, wavesoldering for 10s  
80  
/W  
265  
llElectrical characteristics (Ta = 25°C)  
Values  
Parameter  
Symbol  
V(BR)DSS  
Conditions  
Unit  
V
Min. Typ. Max.  
Drain - Source breakdown  
voltage  
V
V
= 0V, I = 1mA  
D
650  
-
-
GS  
= 650V, V = 0V  
DS  
GS  
Zero gate voltage  
drain current  
IDSS  
T = 25°C  
-
-
-
-
-
-
100  
1000  
±100  
5.0  
μA  
j
T = 125°C  
j
IGSS  
V
GS  
V
DS  
V
GS  
= ±20V, V = 0V  
DS  
Gate - Source leakage current  
Gate threshold voltage  
-
nA  
V
VGS(th)  
= V , I = 1.30mA  
3.0  
GS  
D
= 10V, I = 18.1A  
D
Static drain - source  
on - state resistance  
*5  
RDS(on)  
T = 25°C  
-
-
-
0.098 0.115  
Ω
Ω
j
T = 125°C  
j
0.200  
1.1  
-
-
RG  
Gate resistance  
f = 1MHz, open drain  
www.rohm.com  
© 2020 ROHMCo., Ltd. All rights reserved.  
2/11  
20201022 - Rev.002  
R6535KNX3  
Datasheet  
Unit  
llElectrical characteristics (Ta = 25°C)  
Values  
Min. Typ. Max.  
Parameter  
Symbol  
Conditions  
= 0V  
Ciss  
Coss  
Crss  
Input capacitance  
V
V
-
-
-
-
-
-
-
3000  
2500  
85  
-
-
-
-
-
-
-
GS  
= 25V  
Output capacitance  
Reverse transfer capacitance  
Turn - on delay time  
Rise time  
pF  
ns  
DS  
f = 1MHz  
300V, V = 10V  
*5  
td(on)  
V
DD  
45  
GS  
tr*5  
I = 17.5A  
100  
115  
65  
D
*5  
td(off)  
R 17.4Ω  
Turn - off delay time  
Fall time  
L
tf*5  
R = 10Ω  
G
llGate charge characteristics (Ta = 25°C)  
Values  
Parameter  
Symbol  
Conditions  
300V  
Unit  
Min. Typ. Max.  
*5  
Qg  
Total gate charge  
V
-
-
-
-
72  
20  
30  
6.6  
-
-
-
-
DD  
*5  
Qgs  
I = 35A  
D
Gate - Source charge  
Gate - Drain charge  
Gate plateau voltage  
nC  
V
*5  
Qgd  
V
GS  
DD  
= 10V  
V(plateau)  
V
300V, I = 35A  
D
*1 Limited only by maximum channel temperature allowed.  
*2 Pw ≤ 10μs, Duty cycle ≤ 1%  
*3 L50mH, V =50V, R =25Ω, STARTING T=25℃  
DD  
G
j
*4 T =25℃  
C
*5 Pulsed  
www.rohm.com  
© 2020 ROHMCo., Ltd. All rights reserved.  
3/11  
20201022 - Rev.002  
R6535KNX3  
Datasheet  
Unit  
llBody diode electrical characteristics (Source-Drain) (Ta = 25°C)  
Values  
Typ.  
Parameter  
Source current  
Symbol  
Conditions  
Min.  
-
Max.  
35  
*1  
IS  
-
-
A
A
T = 25  
C
*2  
ISP  
Pulsed source current  
Source-Drain voltage  
-
-
-
-
-
105  
*5  
VSD  
V
GS  
= 0V, I = 35A  
S
-
1.5  
V
*5  
trr  
Reverse recovery time  
Reverse recovery charge  
Peak reverse recovery current  
660  
14.5  
44  
-
-
-
ns  
μC  
A
I = 35A  
di/dt = 100A/μs  
S
*5  
Qrr  
*5  
Irr  
www.rohm.com  
© 2020 ROHMCo., Ltd. All rights reserved.  
4/11  
20201022 - Rev.002  
R6535KNX3  
Datasheet  
llElectrical characteristic curves  
Fig.1 Power Dissipation Derating Curve  
Fig.2 Drain Current Derating  
Curve vs. Ambient Temperature  
Fig.3 Normalized Transient Thermal  
Resistance vs. Pulse Width  
Fig.4 Maximum Safe Operating Area  
www.rohm.com  
© 2020 ROHMCo., Ltd. All rights reserved.  
5/11  
20201022 - Rev.002  
R6535KNX3  
Datasheet  
llElectrical characteristic curves  
Fig.5 Avalanche Energy Derating  
Curve vs. Junction Temperature  
Fig.6 Normalized Breakdown Voltage vs.  
Junction Temperature  
Fig.7 Typical Output Characteristics(I)  
Fig.8 Typical Output Characteristics(II)  
www.rohm.com  
© 2020 ROHMCo., Ltd. All rights reserved.  
6/11  
20201022 - Rev.002  
R6535KNX3  
Datasheet  
llElectrical characteristic curves  
Fig.9 Typical Transfer Characteristics  
Fig.10 Normalized Gate Threshold .  
Voltage vs Junction Temperature  
Fig.11 Static Drain - Source On - State  
Resistance vs. Drain Current  
Fig.12 Static Drain - Source On - State  
Resistance vs. Gate Source Voltage  
www.rohm.com  
© 2020 ROHMCo., Ltd. All rights reserved.  
7/11  
20201022 - Rev.002  
R6535KNX3  
Datasheet  
llElectrical characteristic curves  
Fig.13 Normalized Static Drain - Source  
Fig.14 Typical Capacitance vs.  
Drain - Source Voltage  
On - State Resistance  
vs. Junction Temperature  
Fig.15 Switching Characteristics  
Fig.16 Typical Gate Charge  
www.rohm.com  
© 2020 ROHMCo., Ltd. All rights reserved.  
8/11  
20201022 - Rev.002  
R6535KNX3  
Datasheet  
llElectrical characteristic curves  
Fig.17 Source Current  
Fig.18 Reverse Recovery Time vs.  
Source Current  
vs. Source - Drain Voltage  
www.rohm.com  
© 2020 ROHMCo., Ltd. All rights reserved.  
9/11  
20201022 - Rev.002  
R6535KNX3  
Datasheet  
llMeasurement circuits  
Fig.1-1 Switching Time Measurement Circuit  
Fig.1-2 Switching Waveforms  
Fig.2-2 Gate Charge Waveform  
Fig.3-2 Avalanche Waveform  
Fig.4-2 trr Waveform  
Fig.2-1 Gate Charge Measurement Circuit  
Fig.3-1 Avalanche Measurement Circuit  
Fig.4-1 trr Measurement Circuit  
www.rohm.com  
© 2020 ROHMCo., Ltd. All rights reserved.  
10/11  
20201022 - Rev.002  
R6535KNX3  
Datasheet  
llDimensions  
www.rohm.com  
© 2020 ROHMCo., Ltd. All rights reserved.  
11/11  
20201022 - Rev.002  
Notice  
Precaution on using ROHM Products  
1. Our Products are designed and manufactured for application in ordinary electronic equipment (such as AV equipment,  
OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you  
intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1), transport  
equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car  
accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or  
serious damage to property (Specific Applications), please consult with the ROHM sales representative in advance.  
Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any  
damages, expenses or losses incurred by you or third parties arising from the use of any ROHMs Products for Specific  
Applications.  
(Note1) Medical Equipment Classification of the Specific Applications  
JAPAN  
USA  
EU  
CHINA  
CLASS  
CLASSⅣ  
CLASSb  
CLASSⅢ  
CLASSⅢ  
CLASSⅢ  
2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor  
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate  
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which  
a failure or malfunction of our Products may cause. The following are examples of safety measures:  
[a] Installation of protection circuits or other protective devices to improve system safety  
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure  
3. Our Products are designed and manufactured for use under standard conditions and not under any special or  
extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way  
responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any  
special or extraordinary environments or conditions. If you intend to use our Products under any special or  
extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of  
product performance, reliability, etc, prior to use, must be necessary:  
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents  
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust  
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,  
H2S, NH3, SO2, and NO2  
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves  
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items  
[f] Sealing or coating our Products with resin or other coating materials  
[g] Use of our Products without cleaning residue of flux (Exclude cases where no-clean type fluxes is used.  
However, recommend sufficiently about the residue.) ; or Washing our Products by using water or water-soluble  
cleaning agents for cleaning residue after soldering  
[h] Use of the Products in places subject to dew condensation  
4. The Products are not subject to radiation-proof design.  
5. Please verify and confirm characteristics of the final or mounted products in using the Products.  
6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse, is applied,  
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power  
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect  
product performance and reliability.  
7. De-rate Power Dissipation depending on ambient temperature. When used in sealed area, confirm that it is the use in  
the range that does not exceed the maximum junction temperature.  
8. Confirm that operation temperature is within the specified range described in the product specification.  
9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in  
this document.  
Precaution for Mounting / Circuit board design  
1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product  
performance and reliability.  
2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must  
be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,  
please consult with the ROHM representative in advance.  
For details, please refer to ROHM Mounting specification  
Notice-PGA-E  
Rev.004  
© 2015 ROHM Co., Ltd. All rights reserved.  
Precautions Regarding Application Examples and External Circuits  
1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the  
characteristics of the Products and external components, including transient characteristics, as well as static  
characteristics.  
2. You agree that application notes, reference designs, and associated data and information contained in this document  
are presented only as guidance for Products use. Therefore, in case you use such information, you are solely  
responsible for it and you must exercise your own independent verification and judgment in the use of such information  
contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses  
incurred by you or third parties arising from the use of such information.  
Precaution for Electrostatic  
This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper  
caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be  
applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron,  
isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).  
Precaution for Storage / Transportation  
1. Product performance and soldered connections may deteriorate if the Products are stored in the places where:  
[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2  
[b] the temperature or humidity exceeds those recommended by ROHM  
[c] the Products are exposed to direct sunshine or condensation  
[d] the Products are exposed to high Electrostatic  
2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period  
may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is  
exceeding the recommended storage time period.  
3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads  
may occur due to excessive stress applied when dropping of a carton.  
4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of  
which storage time is exceeding the recommended storage time period.  
Precaution for Product Label  
A two-dimensional barcode printed on ROHM Products label is for ROHMs internal use only.  
Precaution for Disposition  
When disposing Products please dispose them properly using an authorized industry waste company.  
Precaution for Foreign Exchange and Foreign Trade act  
Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign  
trade act, please consult with ROHM in case of export.  
Precaution Regarding Intellectual Property Rights  
1. All information and data including but not limited to application example contained in this document is for reference  
only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any  
other rights of any third party regarding such information or data.  
2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the  
Products with other articles such as components, circuits, systems or external equipment (including software).  
3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any  
third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM  
will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to  
manufacture or sell products containing the Products, subject to the terms and conditions herein.  
Other Precaution  
1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.  
2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written  
consent of ROHM.  
3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the  
Products or this document for any military purposes, including but not limited to, the development of mass-destruction  
weapons.  
4. The proper names of companies or products described in this document are trademarks or registered trademarks of  
ROHM, its affiliated companies or third parties.  
Notice-PGA-E  
Rev.004  
© 2015 ROHM Co., Ltd. All rights reserved.  
Daattaasshheeeett  
General Precaution  
1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents.  
ROHM shall not be in an y way responsible or liable for failure, malfunction or accident arising from the use of a ny  
ROHM’s Products against warning, caution or note contained in this document.  
2. All information contained in this docume nt is current as of the issuing date and subj ect to change without any prior  
notice. Before purchasing or using ROHM’s Products, please confirm the la test information with a ROHM sale s  
representative.  
3. The information contained in this doc ument is provi ded on an “as is” basis and ROHM does not warrant that all  
information contained in this document is accurate an d/or error-free. ROHM shall not be in an y way responsible or  
liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or  
concerning such information.  
Notice – WE  
Rev.001  
© 2015 ROHM Co., Ltd. All rights reserved.  

R6535KNX3 相关器件

型号 制造商 描述 价格 文档
R6535KNZ ROHM R6xxxKNx系列是重视高效性,以高速开关性能为特点的Super Junction MOSFET产品。该系列产品可在追求高速开关的应用中实现高性能。高速开关性能有助于实现PFC和LLC等电路的高效率化。 获取价格
R6535KNZ4 ROHM R6xxxKNx系列是重视高效性,以高速开关性能为特点的Super Junction MOSFET产品。该系列产品可在追求高速开关的应用中实现高性能。高速开关性能有助于实现PFC和LLC等电路的高效率化。 获取价格
R6535KNZ4C13 ROHM Power Field-Effect Transistor, 获取价格
R6535KNZC17 ROHM Power Field-Effect Transistor, 获取价格
R6545 ETC CRT Controller 获取价格
R6545AC ETC CRT Controller 获取价格
R6545ACE ETC CRT Controller 获取价格
R6545AJ ETC CRT Controller 获取价格
R6545AJE ETC CRT Controller 获取价格
R6545AP ETC CRT Controller 获取价格

R6535KNX3 相关文章

  • 强制中企出售股权,英国半导体领域渐成中企投资禁区
    2024-11-08
    14
  • 台积电拟对大陆AI公司禁运7nm及以下工艺,引发业界关注
    2024-11-08
    11
  • 锐成芯微推出基于8nm工艺的PVT Sensor IP,引领芯片技术创新
    2024-11-08
    10
  • 苹果与富士康接洽,商讨在中国台湾生产AI服务器
    2024-11-08
    10