首页 > TSM-136-05-L-SV-LC-P

TSM-136-05-L-SV-LC-P

更新时间：2025-05-22 13:36:47
品牌：SAMTEC
描述：Board Connector, 36 Contact(s), 1 Row(s), Male, Straight, Surface Mount Terminal,

PDF下载

中文翻译

免费 PCB/SMT

TSM-136-05-L-SV-LC-P 概述

Board Connector, 36 Contact(s), 1 Row(s), Male, Straight, Surface Mount Terminal, 集管和边缘连接器

TSM-136-05-L-SV-LC-P 规格参数

是否Rohs认证：符合生命周期：Active
Reach Compliance Code：compliantECCN代码：EAR99
HTS代码：8536.69.40.40风险等级：5.78
Is Samacsys：N板上安装选件：SPLIT BOARD LOCK
主体宽度：0.1 inch主体深度：0.15 inch
主体长度：3.6 inch连接器类型：BOARD CONNECTOR
联系完成配合：GOLD (10) OVER NICKEL (50)联系完成终止：Matte Tin (Sn)
触点性别：MALE触点模式：RECTANGULAR
触点样式：SQ PIN-SKTDIN 符合性：NO
滤波功能：NOIEC 符合性：NO
绝缘体颜色：BLACKJESD-609代码：e3
MIL 符合性：NO插接触点节距：0.1 inch
混合触点：NO安装方式：STRAIGHT
安装类型：BOARD连接器数：ONE
PCB行数：1装载的行数：1
最高工作温度：125 °C最低工作温度：-55 °C
选件：GENERAL PURPOSEPCB接触模式：STAGGERED
PCB触点行间距：3.175 mm电镀厚度：10u inch
可靠性：COMMERCIAL子类别：Headers and Edge Type Connectors
端子节距：2.54 mm端接类型：SURFACE MOUNT
触点总数：36UL 易燃性代码：94V-0
Base Number Matches：1

TSM-136-05-L-SV-LC-P 数据手册

通过下载TSM-136-05-L-SV-LC-P数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
TSM-1XX-XX-XXX-SV-XX-XXX-XX  
REVISION BO  
OPTION #3  
No OF POSITIONS  
-02 THRU -50  
-P: PICK & PLACE PAD (SEE FIG. 3)  
[USE PPP-07](4 POS MINIMUM  
OR -02 & -03 POS WITH -TR)  
(SEE NOTE 7)  
-TR: TAPE & REEL (SEE NOTE 7)  
(-02 THRU -22 POS)  
DO NOT  
SCALE FROM  
THIS PRINT  
LEAD STYLE  
SEE TABLE 1  
PLATING SPECIFICATION  
-T: MATT TIN CONTACT AND TAIL  
-S: SELECTIVE, 30 Au / 50 Ni MIN ON  
CONTACT, MATTE TIN TAIL  
C
.000[.00]  
.015[.13]  
OPTION #2  
POLARIZED POSITION: SPECIFY PIN OMITTED  
(No OF POS x .100[2.54])  
-G: GOLD, 10 Au / 50 Ni MIN ON CONTACT,  
3 Au / 50 Ni MIN ON TAIL  
-L: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON  
CONTACT, MATTE TIN ON TAIL  
-F: FLASH SELECTIVE, 3 Au / 50 Ni MIN ON  
CONTACT, MATTE TIN TAIL  
(No OF POS -1) x .100[2.54]  
OPTION #1  
-LC: LOCKING CLIP (SEE FIG. 1)(SEE NOTE 8)  
[USE LC-08-TM-02](-02 THRU -36 POS: 2 PER STRIP,  
-02 POS: 1 PER STRIP)  
02  
-H: HEAVY GOLD, 30 Au / 50 Ni MIN ON  
CONTACT, 3 Au / 50 Ni MIN ON TAIL  
-TL: TIN / LEAD (90/10+/-5%) CONTACT AND TAIL  
[LEAD STYLE -01 & -02 ONLY]  
-A: ALIGNMENT PIN (SEE FIG. 2)  
.100 2.54 REF  
ROW SPECIFICATION  
-SV: SINGLE VERTICAL (USE TSM-XX-SV-XX)  
-STL: SELECTIVE, 30 Au / 50 Ni MIN ON  
CONTACT, TIN/LEAD (90/10+/-5%) TAIL  
[LEAD STYLE -01 & -02 ONLY]  
01  
-TM: MATTE TIN CONTACT AND TAIL  
-SM: SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT,  
MATTE TIN TAIL  
IN-PROCESS  
-A OPTION ONLY  
5
MAX SWAY  
(TYP)  
TSM-XX-SV  
-LM: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON CONTACT,  
MATTE TIN TAIL  
-FM: FLASH SELECTIVE, 3 Au / 50 Ni MIN ON CONTACT,  
MATTE TIN TAIL  
"B" +.002[.05]  
-.000[.00]  
-SS: STRIPE SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT,  
MATTE TIN TAIL (SEE NOTE 9)  
T-1S6-XX-X-2  
(SEE TABLE 1  
& NOTE 5)  
2
MAX SWAY  
2
MAX TOE  
(TYP)  
"E" REF  
(EITHER DIRECTION)  
.025 0.64 SQ REF  
(TYP)  
C
"F"  
(CONTACT AREA)  
"B" .008[.20]  
(SEE TABLE 1  
& NOTE 5)  
C
+5°  
-0°  
90° (TYP)  
IN-PROCESS  
.050±.010 1.27±0.25  
(TYP)  
C
.100 2.54 REF  
.006  
.000[.00]  
.005[.13]  
.099 2.51  
"B"  
(SEE TABLE 1  
& NOTE 5)  
LC-08-TM-02  
.010 0.25 REF  
(No OF POS -2) x .100[2.54]  
NOTES:  
C
C
"D" MAX  
"E" REF  
C
1.  
REPRESENTS A CRITICAL DIMENSION.  
2. COPLANARITY TO BE WITHIN .006[.15].  
3. BURR ALLOWANCE: .0015[.038] MAX.  
.056 1.42 REF  
2
MAX SWAY  
(EITHER DIRECTION)  
4. MAXIMUM CUT FLASH: .015[.38] MAXIMUM ON TOP & SIDES OF BODY  
AND .030[.76] MAXIMUM ON SURFACE MOUNT SIDE OF BODY.  
5. POST HEIGHT VARIATION BETWEEN ANY TWO PINS: .005[.13] MAXIMUM.  
6. MAXIMUM ALLOWABLE BOW: .002[.05] INCH/INCH AFTER ASSEMBLY.  
7. LEADS MAY NOT BE VISIBLE FOR CUSTOMER VISUAL INSPECTION WITH -P  
OPTION ON SMALLER POSITIONS PARTS.  
FIG 1  
TSM-112-02-XXX-SV-LC SHOWN  
8. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION  
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS  
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE –LC OPTION.  
9. -01 LEAD STYLE ONLY, MATES WITH SSW, SSQ, BCS, SSM, ESW, ESQ.  
PROPRIETARY NOTE  
UNLESS OTHERWISE SPECIFIED,  
DIMENSIONS ARE IN INCHES.  
TOLERANCES ARE:  
THIS DOCUMENT CONTAINS INFORMATION  
CONFIDENTIAL AND PROPRIETARY TO  
SAMTEC, INC. AND SHALL NOT BE REPRODUCED  
OR TRANSFERRED TO OTHER DOCUMENTS OR  
DISCLOSED TO OTHERS OR USED FOR ANY  
PURPOSE OTHER THAN THAT WHICH IT WAS  
OBTAINED WITHOUT THE EXPRESSED WRITTEN  
CONSENT OF SAMTEC, INC.  
DECIMALS  
ANGLES  
2
.XX: .01 [.3]  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733 FAX: 812-948-5047  
e-Mail info@SAMTEC.com code 55322  
.XXX: .005 [.13]  
.XXXX: .0020 [.051]  
SHEET SCALE: 2.5:1  
MATERIAL:  
DO NOT SCALE DRAWING  
DESCRIPTION:  
INSULATOR:  
SINGLE ROW .100 SMT ASSEMBLY  
LCP, UL 94 VO  
COLOR: BLACK  
DWG. NO.  
TSM-1XX-XX-XXX-SV-XX-XXX-XX  
TERMINAL: PHOS BRONZE  
BY:  
DEAN P  
8/21/2002  
SHEET 1 OF 2  
F:\DWG\MISC\MKTG\TSM-1XX-XX-XXX-SV-XX-XXX-XX-MKT.SLDDRW  
REVISION BO  
FIG 4  
FIG 3  
-P: PICK & PLACE PAD OPTION  
TUBE PACKAGING  
4 POSITION MINIMUM  
[PLACE PAD ON CENTERLINE AS SHOWN]  
.400 10.16  
REF  
"A" .020  
C
L
NOTES:  
1. LOAD PARTS POSITION 1 FIRST IN SAME DIRECTION AS ARROW.  
2. NOTE DELETED  
3. PACKAGE POSITIONS -04 THRU -36.  
4. POLARIZED 4 POSITION PARTS WITHOUT PADS ARE TO BE LAYER PACKAGED  
OR PACKAGED IN TAPE AND REEL.  
PPP-07  
.270 6.86  
REF  
FIG 5  
"C" .010[.25]  
-TR: TAPE & REEL PACKAGNG OPTION  
POS 1 (TOWARD  
ROUND HOLE)  
"A" = (No OF POSITIONS x .100[2.54]) - .400[10.16]  
2
FIG 2  
-A: ALIGNMENT PIN OPTION  
TSM-112-02-X-SV-A SHOWN  
USER DIRECTION OF UN-REELING  
POCKET NOT DETAILED  
[DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1]  
SEE TABLE 2  
F:\DWG\MISC\MKTG\TSM-1XX-XX-XXX-SV-XX-XXX-XX-MKT.SLDDRW  
.100 2.54 REF  
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS INFORMATION  
CONFIDENTIAL AND PROPRIETARY TO  
SAMTEC, INC. AND SHALL NOT BE REPRODUCED  
OR TRANSFERRED TO OTHER DOCUMENTS OR  
DISCLOSED TO OTHERS OR USED FOR ANY  
PURPOSE OTHER THAN THAT WHICH IT WAS  
OBTAINED WITHOUT THE EXPRESSED WRITTEN  
CONSENT OF SAMTEC, INC.  
.062 1.57  
REF  
(No OF POS -2) x .100[2.54] REF  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733  
FAX: 812-948-5047  
code 55322  
e-Mail info@SAMTEC.com  
DESCRIPTION:  
DO NOT SCALE DRAWING  
SHEET SCALE: 2:1  
SINGLE ROW .100 SMT ASSEMBLY  
DWG.  
NO. TSM-1XX-XX-XXX-SV-XX-XXX-XX  
BY:  
DEAN P  
8/21/2002  
SHEET 2 OF 2  

TSM-136-05-L-SV-LC-P 相关器件

型号 制造商 描述 价格 文档
TSM-136-05-LM-DV SAMTEC .025 SQ. TERMINAL STRIPS 获取价格
TSM-136-05-P-SV SAMTEC Board Connector, 36 Contact(s), 1 Row(s), Male, Straight, Surface Mount Terminal, 获取价格
TSM-136-05-S-DV SAMTEC .025 SQ. TERMINAL STRIPS 获取价格
TSM-136-05-S-DV-A SAMTEC .025 SQ. TERMINAL STRIPS 获取价格
TSM-136-05-S-DV-M SAMTEC Board Connector, 72 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Black Insulator, Receptacle 获取价格
TSM-136-05-S-DV-P SAMTEC .025 SQ. TERMINAL STRIPS 获取价格
TSM-136-05-S-SV-A-P SAMTEC Board Connector, 36 Contact(s), 1 Row(s), Male, Straight, Surface Mount Terminal, 获取价格
TSM-136-05-S-SV-LC-P SAMTEC Board Connector, 36 Contact(s), 1 Row(s), Male, Straight, Surface Mount Terminal, 获取价格
TSM-136-05-S-SV-P SAMTEC Board Connector, 36 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Black Insulator, Receptacle 获取价格
TSM-136-05-SM-DV SAMTEC .025 SQ. TERMINAL STRIPS 获取价格

TSM-136-05-L-SV-LC-P 相关文章

  • 基于 T2L 的 HIPERFACE DSL：工业编码器通信的新选择
    2025-05-23
    24
  • 2025 年，边缘 AI 芯片架构王者之争的揭晓？
    2025-05-23
    18
  • 小米玄戒 O1 登场:突破芯片极限，展现强劲实力
    2025-05-23
    47
  • RISC-V 架构来袭，服务器 CPU 芯片带来多元化选择
    2025-05-23
    20

    • 热门型号

  • 1N5930
  • 1N5942B
  • 1N4001
  • MBR3050CT
  • RTA02-8D
  • 4116T
  • 5KP43A/4
  • 1N5260A
  • MC79L05
  • BZX85C30
  • 9510-G
  • W2PE-54WZ-P
  • 1N6063
  • 2SA673
  • 20IMX35
    • Hi,有什么可以帮您？ 在线客服 或 微信扫码咨询
  • 概述
  • 规格参数
  • 数据手册
    • 2025 ICPDF网 联系我们和版权申明:QQ 272164286