015AZ13

更新时间:2025-03-20 19:15:26
品牌:TOSHIBA
描述:DIODE VOLTAGE REGULATOR DIODE, Voltage Regulator Diode

015AZ13 概述

DIODE VOLTAGE REGULATOR DIODE, Voltage Regulator Diode 齐纳二极管

015AZ13 规格参数

生命周期:ObsoleteReach Compliance Code:unknown
ECCN代码:EAR99HTS代码:8541.10.00.50
风险等级:5.84二极管类型:ZENER DIODE
Base Number Matches:1

015AZ13 数据手册

通过下载015AZ13数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
015AZ2.0~015AZ24  
TOSHIBA Diode Silicon Epitaxial Planar Type  
015AZ2.0~015AZ24  
Constant-Voltage Regulation Applications  
Unit: mm  
z Small package  
z Nominal voltage tolerance of about ±2.5%  
(2.0 V~24 V)  
Absolute Maximum Ratings (Ta = 25°C)  
Characteristic  
Power dissipation  
Symbol  
Rating  
Unit  
P*  
150  
125  
mW  
°C  
Junction temperature  
T
j
Storage temperature range  
T
stg  
55~125  
°C  
Note: Using continuously under heavy loads (e.g. the application of high  
temperature/current/voltage and the significant change in  
temperature, etc.) may cause this product to decrease in the  
reliability significantly even if the operating conditions (i.e. operating  
temperature/current/voltage, etc.) are within the absolute maximum  
ratings.  
Please design the appropriate reliability upon reviewing the Toshiba  
Semiconductor Reliability Handbook (“Handling  
Precautions”/“Derating Concept and Methods”) and individual  
reliability data (i.e. reliability test report and estimated failure rate,  
etc).  
JEDEC  
JEITA  
TOSHIBA  
1-1G1A  
* Mounted on a glass-epoxy circuit board of 20 × 20 mm,  
Pad dimensions of 4 × 4 mm.  
Weight: 1.4 mg (typ.)  
Electrical Characteristics  
(See pages 2~3.)  
Marking  
VZ additional ranking  
upper --- X rank , middle --- Y rank , lower --- Z rank  
Voltage rank  
24  
Decimal point  
z : VZ = (VZ ranking voltage) X 0.1, nil: VZ = VZ ranking  
Example 1: 015AZ2.4-X  
24  
Example 2: 015AZ2.4-Z  
24  
Example 3: 015AZ12-X  
12  
Pin Assignment (Top View)  
1
2007-11-01  
015AZ2.0~015AZ24  
Electrical Characteristics (Ta = 25°C)  
Zener  
Voltage  
Dynamic  
Impedance  
Knee Dynamic  
Impedance  
Reverse  
Current  
Type No.  
* V (V)  
Z
Z
()  
Z
ZK  
()  
I (μA)  
R
Z
I
I
I
V
R
Z
Z
Z
(mA)  
(mA)  
(V)  
(mA)  
Min  
Max  
Max  
100  
100  
100  
110  
120  
130  
130  
130  
Max  
1000  
Max  
X
Z
X
Z
X
Z
X
Z
X
Z
X
Z
X
Z
X
Z
X
Y
Z
X
Y
Z
X
Y
Z
X
Y
Z
X
Y
Z
X
Y
Z
1.85  
1.95  
2.05  
2.16  
2.28  
2.40  
2.50  
2.65  
2.80  
2.95  
3.10  
3.25  
3.40  
3.55  
3.70  
3.87  
4.00  
4.13  
4.25  
4.40  
4.53  
4.66  
4.80  
4.97  
5.14  
5.30  
5.43  
5.61  
5.80  
6.00  
6.19  
6.40  
6.60  
6.82  
2.05  
2.15  
2.26  
2.38  
2.50  
2.60  
2.75  
2.90  
3.05  
3.20  
3.35  
3.50  
3.65  
3.80  
3.97  
4.10  
4.23  
4.35  
4.50  
4.63  
4.76  
4.90  
5.07  
5.24  
5.40  
5.63  
5.81  
6.00  
6.20  
6.39  
6.60  
6.80  
7.02  
7.20  
015AZ2.0 **  
015AZ2.2 **  
015AZ2.4  
015AZ2.7  
015AZ3.0  
015AZ3.3  
015AZ3.6  
015AZ3.9  
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
120  
120  
120  
120  
50  
0.5  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1000  
1000  
1000  
1000  
1000  
1000  
1000  
20  
10  
10  
015AZ4.3  
015AZ4.7  
015AZ5.1  
015AZ5.6  
015AZ6.2  
015AZ6.8  
5
5
5
5
5
5
130  
120  
70  
5
5
5
5
5
5
1000  
1000  
1000  
900  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
5
5
1.0  
1.0  
1.5  
2.5  
3.0  
5.0  
1
40  
1
30  
500  
1
25  
150  
0.5  
*
: Test time: t = 30 ms  
** : Product by order.  
2
2007-11-01  
015AZ2.0~015AZ24  
Electrical Characteristics (Ta = 25ºC)  
Zener  
Voltage  
Dynamic  
Impedance  
Knee Dynamic  
Impedance  
Reverse  
Current  
* V (V)  
Z
Z
()  
Z
ZK  
()  
I (μA)  
R
Type No.  
Z
I
I
I
V
R
Z
Z
Z
(mA)  
(mA)  
(mA)  
(V)  
Min  
Max  
Max  
23  
Max  
Max  
X
Y
Z
X
Y
Z
X
Y
Z
X
Y
Z
X
Y
Z
X
Y
Z
X
Y
Z
X
Y
Z
X
Y
Z
X
Y
Z
X
Y
Z
X
Y
Z
X
Y
Z
7.00  
7.23  
7.46  
7.70  
7.96  
8.23  
8.50  
8.80  
9.10  
9.40  
7.43  
7.66  
7.90  
8.16  
8.43  
8.70  
9.00  
9.30  
9.60  
9.93  
015AZ7.5  
015AZ8.2  
015AZ9.1  
015AZ10  
015AZ11  
015AZ12  
015AZ13  
015AZ15  
015AZ16  
015AZ18  
015AZ20  
015AZ22  
015AZ24  
5
5
120  
120  
120  
120  
120  
110  
110  
110  
150  
150  
200  
200  
200  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
6.0  
5
5
5
5
5
5
5
5
5
5
5
5
20  
18  
15  
15  
15  
15  
15  
18  
20  
25  
30  
40  
5
5
5
5
5
5
5
5
5
5
5
5
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
6.5  
7.0  
8.0  
8.5  
9.0  
10  
9.73 10.26  
10.06 10.60  
10.40 10.98  
10.73 11.26  
11.06 11.60  
11.40 11.93  
11.73 12.26  
12.06 12.60  
12.40 13.08  
12.88 13.57  
13.37 14.10  
13.80 14.63  
14.33 15.11  
14.81 15.60  
15.30 16.10  
15.80 16.60  
16.30 17.10  
16.80 17.76  
17.46 18.43  
18.13 19.10  
18.80 19.78  
19.48 20.46  
20.16 21.20  
20.80 21.88  
21.48 22.56  
22.16 23.30  
22.80 24.11  
23.61 24.92  
24.42 25.60  
11  
12  
14  
15  
17  
19  
*
: Test time: t = 30 ms  
3
2007-11-01  
015AZ2.0~015AZ24  
015AZ  
ZENNER VOLTAGE  
V
Z
(V)  
4
2007-11-01  
015AZ2.0~015AZ24  
5
2007-11-01  
015AZ2.0~015AZ24  
RESTRICTIONS ON PRODUCT USE  
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information  
in this document, and related hardware, software and systems (collectively “Product”) without notice.  
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with  
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.  
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are  
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and  
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily  
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must  
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,  
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA  
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are  
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the  
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any  
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other  
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO  
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.  
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring  
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.  
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or  
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious  
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used  
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling  
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric  
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this  
document.  
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.  
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any  
applicable laws or regulations.  
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any  
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to  
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.  
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE  
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY  
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR  
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND  
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO  
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS  
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.  
Do not use or otherwise make available Product or related software or technology for any military purposes, including without  
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile  
technology products (mass destruction weapons). Product and related software and technology may be controlled under the  
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product  
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.  
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.  
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,  
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of  
noncompliance with applicable laws and regulations.  
6
2007-11-01  

015AZ13 相关器件

型号 制造商 描述 价格 文档
015AZ13-X TOSHIBA DIODE 12.74 V, 0.15 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, ESC, 1-1G1A, 2 PIN, Voltage Regulator Diode 获取价格
015AZ13-Y TOSHIBA DIODE 13.225 V, 0.15 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, ESC, 1-1G1A, 2 PIN, Voltage Regulator Diode 获取价格
015AZ13-Z TOSHIBA DIODE 13.735 V, 0.15 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, ESC, 1-1G1A, 2 PIN, Voltage Regulator Diode 获取价格
015AZ15 TOSHIBA DIODE VOLTAGE REGULATOR DIODE, Voltage Regulator Diode 获取价格
015AZ15-X TOSHIBA DIODE 14.215 V, 0.15 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, ESC, 1-1G1A, 2 PIN, Voltage Regulator Diode 获取价格
015AZ15-Y TOSHIBA DIODE 14.72 V, 0.15 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, ESC, 1-1G1A, 2 PIN, Voltage Regulator Diode 获取价格
015AZ15-Z TOSHIBA DIODE 15.205 V, 0.15 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, ESC, 1-1G1A, 2 PIN, Voltage Regulator Diode 获取价格
015AZ16 TOSHIBA DIODE VOLTAGE REGULATOR DIODE, Voltage Regulator Diode 获取价格
015AZ16-X TOSHIBA DIODE 15.7 V, 0.15 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, ESC, 1-1G1A, 2 PIN, Voltage Regulator Diode 获取价格
015AZ16-Y TOSHIBA DIODE 16.2 V, 0.15 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, ESC, 1-1G1A, 2 PIN, Voltage Regulator Diode 获取价格

015AZ13 相关文章

  • 探究驱动器、开关与激光二极管对提升激光雷达性能的作用
    2025-02-26
    101
  • 利用数字预失真技术打造超精准信号发生器
    2025-02-26
    109
  • 英伟达挑战欧盟反垄断调查:起诉质疑Run:ai收购案的调查
    2025-02-26
    76
  • 英特尔18A工艺良率仅20%~30%,下半年量产计划面临挑战
    2025-02-26
    77
  • Hi,有什么可以帮您? 在线客服 或 微信扫码咨询