TA8499FG
更新时间:2024-12-03 13:10:47
品牌:TOSHIBA
描述:IC DISK DRIVE MOTOR CONTROLLER, 1.5 A, PDSO30, 0.375 INCH, 1 MM PITCH, LEAD FREE, PLASTIC, SSOP-30, Motion Control Electronics
TA8499FG 概述
IC DISK DRIVE MOTOR CONTROLLER, 1.5 A, PDSO30, 0.375 INCH, 1 MM PITCH, LEAD FREE, PLASTIC, SSOP-30, Motion Control Electronics 运动控制电子器件
TA8499FG 规格参数
是否无铅: | 不含铅 | 是否Rohs认证: | 符合 |
生命周期: | Active | 零件包装代码: | SSOP |
包装说明: | SSOP, SOP30,.4,40 | 针数: | 30 |
Reach Compliance Code: | unknown | ECCN代码: | EAR99 |
HTS代码: | 8542.39.00.01 | 风险等级: | 5.17 |
Is Samacsys: | N | 其他特性: | DIRECT PWM CONTROL SYSTEM, BUILT-IN THERMAL SHUTDOWN CIRCUIT |
模拟集成电路 - 其他类型: | DISK DRIVE MOTOR CONTROLLER | JESD-30 代码: | R-PDSO-G30 |
长度: | 15.4 mm | 功能数量: | 1 |
端子数量: | 30 | 最高工作温度: | 75 °C |
最低工作温度: | -20 °C | 最大输出电流: | 1.5 A |
封装主体材料: | PLASTIC/EPOXY | 封装代码: | SSOP |
封装等效代码: | SOP30,.4,40 | 封装形状: | RECTANGULAR |
封装形式: | SMALL OUTLINE, SHRINK PITCH | 峰值回流温度(摄氏度): | NOT SPECIFIED |
电源: | 5,12 V | 认证状态: | Not Qualified |
座面最大高度: | 2.7 mm | 子类别: | Motion Control Electronics |
最大供电电流 (Isup): | 15 mA | 最大供电电压 (Vsup): | 5.5 V |
最小供电电压 (Vsup): | 4.5 V | 标称供电电压 (Vsup): | 5 V |
表面贴装: | YES | 技术: | BIPOLAR |
温度等级: | COMMERCIAL EXTENDED | 端子形式: | GULL WING |
端子节距: | 1 mm | 端子位置: | DUAL |
处于峰值回流温度下的最长时间: | NOT SPECIFIED | 宽度: | 7.5 mm |
Base Number Matches: | 1 |
TA8499FG 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
TA8504 | TOSHIBA | HIGH SPEED COMPARATOR | 获取价格 | |
TA8504F | TOSHIBA | HIGH SPEED COMPARATOR | 获取价格 | |
TA8505 | TOSHIBA | SUPPLY VOLTAGE SUPERVISOR | 获取价格 | |
TA8505P | TOSHIBA | SUPPLY VOLTAGE SUPERVISOR | 获取价格 | |
TA8508 | TOSHIBA | R/W IC FOR FLOPPY DISK DRIVE | 获取价格 | |
TA8508AF | TOSHIBA | R/W IC FOR FLOPPY DISK DRIVE | 获取价格 | |
TA8517F | TOSHIBA | HIGH SPEED DUAL COMPARATOR | 获取价格 | |
TA8523F | TOSHIBA | PB BATTERY CHARGER IC | 获取价格 | |
TA8529 | TOSHIBA | STEPPING MOTOR DRIVER IC (TA8528 + 2SA950 x 4 MCP) | 获取价格 | |
TA8529F | TOSHIBA | STEPPING MOTOR DRIVER IC (TA8528 + 2SA950 x 4 MCP) | 获取价格 |
TA8499FG 相关文章
- 2024-12-05
- 12
- 2024-12-05
- 10
- 2024-12-05
- 12
- 2024-12-05
- 11