TPSMA10-M3/5AT

更新时间:2025-02-08 05:18:08
品牌:VISHAY
描述:Trans Voltage Suppressor Diode, 400W, 8.1V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMA, 2 PIN

TPSMA10-M3/5AT 概述

Trans Voltage Suppressor Diode, 400W, 8.1V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMA, 2 PIN

TPSMA10-M3/5AT 数据手册

通过下载TPSMA10-M3/5AT数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
New Product  
TPSMA6.8 thru TPSMA43A  
Vishay General Semiconductor  
Surface Mount PAR® Transient Voltage Suppressors  
High Temperature Stability and High Reliability Conditions  
FEATURES  
• Junction  
passivation  
optimized  
design  
passivated anisotropic rectifier technology  
• TJ = 185 °C capability suitable for high reliability  
• Available in uni-directional polarity only  
• 400  
W
peak pulse power capability with  
a
10/1000 μs waveform, repetitive rate (duty cycle): 0.01 %  
• Excellent clamping capability  
DO-214AC (SMA)  
• Very fast response time  
• Meets MSL level 1, per J-STD-020, LF maximum peak of  
260 °C  
• Compliant to RoHS Directive 2002/95/EC and in  
accordance to WEEE 2002/96/EC  
PRIMARY CHARACTERISTICS  
Halogen-free according to IEC 61249-2-21 definition  
VBR  
PPPM  
PD  
6.8 V to 43 V  
400 W  
1.0 W  
40 A  
MECHANICAL DATA  
Case: DO-214AC (SMA)  
IFSM  
Molding compound meets UL 94 V-0 flammability rating  
TJ max.  
185 °C  
Base P/N-M3  
- halogen-free, RoHS compliant, and  
commercial grade  
TYPICAL APPLICATIONS  
Terminals: Matte tin plated leads, solderable per  
J-STD-002 and JESD 22-B102  
M3 suffix meets JESD 201 class 1A whisker test  
Use in sensitive electronics protection against voltage  
transients induced by inductive load switching and lighting  
on ICs, MOSFET, signal lines of sensor units for consumer,  
computer, industrial, and telecommunication.  
Polarity: Color band denotes cathode end  
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)  
PARAMETER  
SYMBOL  
VALUE  
UNIT  
W
(1)(2)  
Peak power dissipation with a 10/1000 μs waveform (fig. 3)  
Peak power pulse current with a 10/1000 μs waveform (fig. 1)  
Power dissipation at TA = 25 °C  
PPPM  
IPPM  
PD  
400  
See next table  
1.0  
(1)  
A
(4)  
W
(3)  
Peak forward surge current 8.3 ms single half sine-wave  
Maximum instantaneous forward voltage at 25 A  
Operating junction and storage temperature range  
IFSM  
40  
A
(3)  
VF  
TJ, TSTG  
3.5  
V
- 65 to + 185  
°C  
Notes  
(1)  
(2)  
(3)  
(4)  
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2  
Mounted on PCB with 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads attached to each terminal  
Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum  
Mounted on minimum recommended pad layout  
Document Number: 89403  
Revision: 19-Apr-11  
For technical questions within your region, please contact one of the following:  
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
www.vishay.com  
1
This document is subject to change without notice.  
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
New Product  
TPSMA6.8 thru TPSMA43A  
Vishay General Semiconductor  
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)  
BREAKDOWN  
VOLTAGE  
VBR (1) AT IT  
(V)  
MAXIMUM  
REVERSE  
LEAKAGE  
AT VWM  
TJ = 150 °C  
MAXIMUM  
MAXIMUM  
MAXIMUM  
TEST  
CURRENT  
IT  
STAND-OFF  
VOLTAGE  
VWM  
DEVICE  
MARKING  
CODE  
PEAK PULSE CLAMPING  
DEVICE  
REVERSE  
SURGE  
CURRENT  
IPPM (2) (A)  
VOLTAGE  
AT IPPM  
VC (V)  
LEAKAGE AT VWM  
ID (μA)  
(mA)  
(V)  
IR (μA)  
MIN.  
6.12  
6.45  
6.75  
7.13  
7.38  
7.79  
8.19  
8.65  
9.00  
9.50  
9.90  
MAX.  
7.48  
TPSMA6.8  
TPSMA6.8A  
TPSMA7.5  
TPSMA7.5A  
TPSMA8.2  
TPSMA8.2A  
TPSMA9.1  
TPSMA9.1A  
TPSMA10  
TPSMA10A  
TPSMA11  
TPSMA11A  
TPSMA12  
TPSMA12A  
TPSMA13  
TPSMA13A  
TPSMA15  
TPSMA15A  
TPSMA16  
TPSMA16A  
TPSMA18  
TPSMA18A  
TPSMA20  
TPSMA20A  
TPSMA22  
TPSMA22A  
TPSMA24  
TPSMA24A  
TPSMA27  
TPSMA27A  
TPSMA30  
TPSMA30A  
TPSMA33  
TPSMA33A  
TPSMA36  
TPSMA36A  
TPSMA39  
TPSMA39A  
TPSMA43  
TPSMA43A  
ADP  
AEP  
AFP  
AGP  
AHP  
AKP  
ALP  
AMP  
ANP  
APP  
AQP  
ARP  
ASP  
ATP  
AUP  
AVP  
AWP  
AXP  
AYP  
AZP  
BDP  
BEP  
BFP  
BGP  
BHP  
BKP  
BLP  
BMP  
BNP  
BPP  
BQP  
BRP  
BSP  
BTP  
BUP  
BVP  
BWP  
BXP  
BYP  
BZP  
10  
10  
5.50  
5.80  
300  
300  
150  
150  
50  
1000  
1000  
500  
500  
200  
200  
50  
37.0  
38.1  
34.2  
35.4  
32.0  
33.1  
29.0  
29.9  
26.7  
27.6  
24.7  
25.6  
23.1  
24.0  
21.1  
22.0  
18.2  
18.9  
17.0  
17.8  
15.1  
15.9  
13.7  
14.4  
12.5  
13.1  
11.5  
12.0  
10.2  
10.7  
9.2  
10.8  
10.5  
11.7  
11.3  
12.5  
12.1  
13.8  
13.0  
15.0  
14.5  
16.2  
15.6  
17.3  
16.7  
19.0  
18.2  
22.0  
21.2  
23.5  
22.0  
26.5  
25.5  
29.1  
27.7  
31.9  
30.6  
34.7  
33.2  
39.1  
37.5  
43.5  
41.4  
47.0  
45.7  
52.0  
49.9  
56.4  
53.9  
61.9  
59.3  
7.14  
8.25  
10  
6.05  
7.88  
10  
6.40  
9.02  
10  
6.63  
8.61  
10  
7.02  
50  
10.00  
9.55  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
7.37  
10  
7.78  
10  
50  
11.00  
10.50  
12.10  
8.10  
5.0  
5.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
20  
8.65  
20  
8.92  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
10.50 11.60  
10.80 13.20  
11.40 12.60  
11.70 14.30  
12.40 13.70  
13.50 16.30  
14.30 15.80  
14.40 17.60  
15.20 16.80  
16.20 19.80  
17.10 18.90  
18.00 22.00  
19.00 21.00  
19.80 24.20  
20.90 23.10  
21.60 26.40  
22.80 25.20  
24.30 29.70  
25.70 28.40  
27.00 33.00  
28.50 31.50  
29.70 36.30  
31.40 34.70  
32.40 39.60  
34.20 37.80  
35.10 42.90  
37.10 41.00  
38.70 47.30  
40.90 45.20  
9.40  
9.72  
10.20  
10.50  
11.10  
12.10  
12.80  
12.90  
13.60  
14.50  
15.30  
16.20  
17.10  
17.80  
18.80  
19.40  
20.50  
21.80  
23.10  
24.30  
25.60  
26.80  
28.20  
29.10  
30.80  
31.60  
33.30  
34.80  
36.80  
9.7  
8.4  
8.8  
7.7  
8.0  
7.1  
7.4  
6.5  
6.7  
Notes  
(1)  
(2)  
(3)  
VBR measured after IT applied for 300 μs, IT = square wave pulse or equivalent  
Surge current waveform per fig. 3 and derated per fig. 2  
All terms and symbols are consistent with ANSI/IEEE C62.35  
www.vishay.com  
2
For technical questions within your region, please contact one of the following:  
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
Document Number: 89403  
Revision: 19-Apr-11  
This document is subject to change without notice.  
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
New Product  
TPSMA6.8 thru TPSMA43A  
Vishay General Semiconductor  
ORDERING INFORMATION (Example)  
PREFERRED P/N  
TPSMA6.8A-M3/61T  
TPSMA6.8A-M3/5AT  
UNIT WEIGHT (g)  
PREFERRED PACKAGE CODE  
BASE QUANTITY  
DELIVERY MODE  
0.064  
61T  
5AT  
1800  
7500  
7" diameter plastic tape and reel  
13" diameter plastic tape and reel  
0.064  
RATINGS AND CHARACTERISTICS CURVES  
(TA = 25 °C unless otherwise noted)  
100  
150  
TJ = 25 °C  
Pulse Width (td)  
is defined as the Point  
where the Peak Current  
decays to 50 % of IPPM  
Non-Repetitive Pulse  
Waveform shown in Fig. 3  
TA = 25 °C  
tr = 10 µs  
Peak Value  
IPPM  
10  
100  
50  
0
Half Value -  
IPP  
2
IPPM  
1.0  
10/1000 µs Waveform  
as defined by R.E.A.  
0.2 x 0.2" (5.0 x 5.0 mm)  
Copper Pad Areas  
td  
0.1  
0.1 µs  
1.0 µs  
10 µs  
100 µs  
1.0 ms  
10 ms  
1.0  
3.0  
4.0  
0
2.0  
t - Time (ms)  
td - Pulse Width (s)  
Fig. 1 - Peak Pulse Power Rating Curve  
Fig. 3 - Pulse Waveform  
100  
10 000  
1000  
100  
VR measured  
at Zero Bias  
75  
50  
25  
V
R measured at  
Stand-Off, VWM  
TJ = 25 °C  
f = 1.0 MHz  
sig = 50 mVp-p  
V
0
10  
1
10  
VBR - Breakdown Voltage (V)  
100  
0
50  
100  
150  
200  
TJ - Initial Temperature (°C)  
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature  
Fig. 4 - Typical Junction Capacitance  
Document Number: 89403  
Revision: 19-Apr-11  
For technical questions within your region, please contact one of the following:  
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
www.vishay.com  
3
This document is subject to change without notice.  
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
New Product  
TPSMA6.8 thru TPSMA43A  
Vishay General Semiconductor  
200  
TJ = TJ max.  
8.3 ms Single Half Sine-Wave  
100  
50  
10  
1
5
10  
50  
100  
Number of Cycles at 60 Hz  
Fig. 5 - Maximum Non-Repetitive Peak Forward Surge Current  
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)  
DO-214AC (SMA)  
Cathode Band  
Mounting Pad Layout  
0.074 (1.88)  
MAX.  
0.066 (1.68)  
MIN.  
0.110 (2.79)  
0.100 (2.54)  
0.065 (1.65)  
0.049 (1.25)  
0.177 (4.50)  
0.157 (3.99)  
0.060 (1.52)  
MIN.  
0.012 (0.305)  
0.006 (0.152)  
0.208 (5.28)  
REF.  
0.090 (2.29)  
0.078 (1.98)  
0.060 (1.52)  
0.030 (0.76)  
0.008 (0.203)  
0 (0)  
0.208 (5.28)  
0.194 (4.93)  
www.vishay.com  
4
For technical questions within your region, please contact one of the following:  
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
Document Number: 89403  
Revision: 19-Apr-11  
This document is subject to change without notice.  
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
Legal Disclaimer Notice  
www.vishay.com  
Vishay  
Disclaimer  
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE  
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,  
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other  
disclosure relating to any product.  
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or  
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all  
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,  
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular  
purpose, non-infringement and merchantability.  
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical  
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements  
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular  
product with the properties described in the product specification is suitable for use in a particular application. Parameters  
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All  
operating parameters, including typical parameters, must be validated for each customer application by the customer’s  
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,  
including but not limited to the warranty expressed therein.  
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining  
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.  
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree  
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and  
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay  
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to  
obtain written terms and conditions regarding products designed for such applications.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by  
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.  
Material Category Policy  
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the  
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council  
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment  
(EEE) - recast, unless otherwise specified as non-compliant.  
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that  
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.  
Revision: 12-Mar-12  
Document Number: 91000  
1

TPSMA10-M3/5AT 相关器件

型号 制造商 描述 价格 文档
TPSMA10-M3/61T VISHAY Trans Voltage Suppressor Diode, 400W, 8.1V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMA, 2 PIN 获取价格
TPSMA10/11 VISHAY Trans Voltage Suppressor Diode, 8.1V V(RWM), Unidirectional, 获取价格
TPSMA10/5A VISHAY Trans Voltage Suppressor Diode, 8.1V V(RWM), Unidirectional, 获取价格
TPSMA100A UNSEMI Surface Mount Transient Voltage Suppressors 获取价格
TPSMA100A ANOVA Surface Mount Transient Voltage Suppressors 获取价格
TPSMA100A LGE 暂无描述 获取价格
TPSMA100CA UNSEMI Surface Mount Transient Voltage Suppressors 获取价格
TPSMA100CA ANOVA Surface Mount Transient Voltage Suppressors 获取价格
TPSMA100CA LGE 暂无描述 获取价格
TPSMA10A VISHAY SURFACE MOUNT AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR 获取价格

TPSMA10-M3/5AT 相关文章

  • 英飞凌发布PSOC™ Control MCU,强化电机控制及功率转换系统效能与效率
    2025-02-10
    0
  • ADI提供的局部放电检测技术解决方案
    2025-02-10
    3
  • 黑芝麻智能芯片获比亚迪采用并量产出货,智驾芯片市场格局或生变
    2025-02-08
    14
  • 泰国大力游说芯片投资,计划 2029 年前投入 5000 亿泰铢
    2025-02-08
    13